Search

The directional synthesis of transition metal phosphides was considered to be an effective strategy to solve the overdependence of noble metals on photocatalytic hydrogen evolution (PHE) reactions. Inspiringly, this work reported a facile method for constructing hollow Co 2 P nanocages (Co 2 P NCGs) that derived from ZIF-67 by calcining and phosphiding procedure in nitrogen atmosphere to act as non-noble metal cocatalysts. Followed with further coating thin-layered ZnIn 2 S 4 (ZIS) on the surface of Co 2 P NCGs through a hydrothermal reaction, the hierarchical robust Co 2 P/ZnIn 2 S 4 nanocages (Co 2 P/ZIS NCGs) were then delicately fabricated as efficient photocatalysts for PHE reactions. The uniquely hollow structure of Co 2 P NCGs largely diffused the photogenerated chargers that induced from ZIS and the closely interfacial contact significantly promoted the separation and transfer of electrons from ZIS to Co 2 P according to density functional theory (DFT) calculation, synergistically resulting in an efficient hydrogen generation performance. PHE results showed that an efficient H 2 evolution rate of 7.93 mmol/g/h over 10% Co 2 P/ZIS NCGs was achieved, about 10 times higher than that of pristine ZnIn 2 S 4. More importantly, the hierarchically hollow Co 2 P/ZIS NCGs exhibited ascendant PHE activity in comparison with that of 1% noble metal (Pt, Au, Ag) loaded ZnIn 2 S 4 with superior sustainability, all indicating the efficient and stable photocatalysts of Co 2 P/ZIS NCGs for PHE reactions. [ABSTRACT FROM AUTHOR]

[Display omitted] • Hollow tubular ZnIn 2 S 4 modified with embedded metal-organic-framework-layers (ZnIn 2 S 4 -MOFL) were rationally designed. • Efficient ZnIn 2 S 4 -MOFL released H 2 bubble at the optimum rate of 28.2 mmol/g/h. • The Z-scheme photocatalytic system strongly promoted the separation of electron and hole pairs. • DFT results revealed the decreased density of states of ZnIn 2 S 4 after coupling with the organic ligands of MOFL. This work reported a facile one-step method for constructing hollow tubular ZnIn 2 S 4 modified by metal-organic-framework-layers (MOFL) with In-MOF as precursor to be efficient photocatalysts (ZnIn 2 S 4 -MOFL) for robust photocatalytic hydrogen evolution (PHE). The dominant catalyst of ZnIn 2 S 4 and cocatalytic role of MOFL synergistically promoted the separation of electron and hole pairs due to the direct Z-scheme photocatalytic system, leading to an extraordinarily high PHE activity. The density functional theory (DFT) results revealed the remarkably decreased density of states (DOS) of ZnIn 2 S 4 after coupling with the organic ligands of MOFL, indeed proving an effectively suppressed recombination of charge carriers and benefited the performance of photocatalytic reactions. Experimental PHE results showed that a large number of hydrogen bubbles were visible to naked eyes and the optimal hydrogen evolution reached 28.2 mmol/g/h, the highest value reported so far among ZnIn 2 S 4 -based photocatalysts, and almost 14.8 times higher than that of pristine ZnIn 2 S 4. More importantly, the superior apparent quantum efficiencies (AQEs) of 22.67 % at monochromatic light (350 nm) and the stable hydrogen generation capability (5.7 mmol/g/h) under real sunlight irradiation all confirmed a promising catalyst of ZnIn 2 S 4 -MOFL for hydrogen evolution applications. [ABSTRACT FROM AUTHOR]

• Nitrogen atoms in Ni@NCNT facilitate the in-situ conversion of metallic Ni to Ni3+ species. • Nitrogen atoms in Ni@NCNT weaken the interaction between Ni3+ and CO 2 in urea oxidation. • 1.56 V is required to achieve 10 mA cm−2 in overall urea oxidation for Ni@NCNT. Urea electro-oxidation is an attractive and alternative anodic reaction in the electrochemical generation of hydrogen using wastewater ascribing to the low theoretical voltage and non-precious metal (nickel) catalyst for urea oxidation reaction (UOR); however, the sluggish UOR and poisoning of catalyst impede the practical application. Here, in this work, we synthesize a series of nickel nanoparticles embedded nitrogen doped carbon nanotubes (Ni@NCNT) and study the effect of nitrogen dopants on UOR catalytic activity. The nitrogen dopants can weaken the binding strength between CO 2 species and active sites resulting in alleviation of CO 2 poisoning; simultaneously, nitrogen dopants also promote the in-situ conversion of Ni3+ species facilitating UOR catalysis; as a result, electrocatalytic current density of 45.8 mA cm−2 is recorded for Ni@NCNT in 1 M KOH electrolyte with 0.5 M urea at 1.5 V vs. RHE, which is 3.8 fold better than commercial Pt/C (11.8 mA cm−2). Moreover, Ni@NCNT, due to the more nitrogen dopants, exhibits a comparable overpotential to commercial Pt/C for driving hydrogen evolution reaction (HER) catalysis in 1 M KOH electrolyte at high current density (400 mA cm−2). Subsequently, 1.56 V is demanded for overall UOR catalysis on Ni@NCNT with current density of 10 mA cm−2. This work offers useful information for designing a stable and efficient electrocatalyst for not only UOR but also electrochemical generation of H 2 from wastewater. [ABSTRACT FROM AUTHOR]

• Atomic layer Co 3 O 4-x nanosheets (1 nm) are synthesized. • Robust OER and ORR activities are achieved for atomic layer Co 3 O 4-x nanosheets. • Rechargeable ZAB performance of Co 3 O 4-x nanosheets is 1.7 fold than Pt/C-IrO 2. Stable and efficient bifunctional electrocatalyst for air electrode is still of challenge for rechargeable zinc-air batteries (ZABs). Here, we report an atomic layer oxygen defect cobalt oxides (Co 3 O 4-x) nanosheets (1 nm) as efficient electrocatalyst for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Due to the atomic layer nanosheets, more oxygen defects are formed during plasma treatment enabling effective OER catalysis with overpotential of only 309 mV, which is lower compared to benchmarking IrO 2 (313 mV). Meanwhile, a Pt-like ORR activity is achieved for Co 3 O 4-x due to the atomic layer nanosheets with highly exposed active sites and loosened binding strength between Co3+ and O 2 /OH−. The battery performance of Co 3 O 4-x nanosheets is 1.7 times higher than that of Pt/C-IrO 2 based ZABs. Besides, Co 3 O 4-x nanosheets exhibit undetectable degradation in battery performance after galvanostatic discharge-charge with 5 mA cm−2 for 150 h implying the superior stability of the atomic layer Co 3 O 4-x nanosheets. All-solid-sate ZABs fabricated from Co 3 O 4-x nanosheets perform an impressive power density of 57 mW cm−2 and stable galvanostatic discharge-charge voltage for 2 h demonstrating that Co 3 O 4-x nanosheets can be utilized as air electrode for practical application. [ABSTRACT FROM AUTHOR]

Highly active and stable electrocatalysts at low cost for hydrogen evolution reaction are essential for large scale hydrogen production. The Ni 3 P-Ni heterostructure confined in 3D networks of carbon nanotube (CNT) has been successfully prepared as the hydrogen evolution reaction (HER) electrode. The morphology and phase composition of Ni 3 P-Ni heterostructure are tunable by varying the acid pickling time. The Ni 3 P-Ni/CNT composite electrode with optimized Ni:Ni 3 P ratio of 22.29 wt% demonstrate high catalytic activity and excellent stability for HER. It demonstrates a comparable HER activity to the standard Pt electrode in alkaline solution, i.e., overpotentials of 116 vs 67 mV at 10 mA·cm−2 and Tafel slops of 59 vs 37 mV·dec−1. No degradation is observed after 1000 cyclic voltammetry (CV) cycles or 50 h operation under constant 0.3 V overpotential. • Pickling affects the morphology of heterogeneous structure and the content of Ni. • The Ni 3 P-Ni heterostructure was anchored to the carbon nanotube network by ball milling. • The electrode was prepared by mixing with PTFE and pressing. • The results show that Ni 3 P-Ni/CNT electrode has the best hydrogen evolution activity when the Ni/Ni 3 P ratio is 22.29 %. [ABSTRACT FROM AUTHOR]

• CoWO 4-x @C exhibits comparable HER activity to Pt/C in acidic and alkaline mediums. • CoWO 4-x @C requires only 295 mV overpotential to deliver 10 mA cm−2 in the OER test. • 1.57 V is required for CoWO 4-x @C to attain 10 mA cm−2 in alkaline water splitting. Development of earth-abundant, efficient and stable electrocatalysts for water splitting is of crucial importance for environmentally friendly energy conversion and storage. Here, we report an oxygen deficient cobalt tungstate nanoparticles with diameter of 8 nm (CoWO 4-x @C) as efficient bifunctional electrocatalyst for hydrogen evolution reaction (HER) and oxygen reduction reaction (OER), which exhibits comparable HER activity to commercial Pt/C with overpotentials of 32.5 mV and 46.8 mV vs. RHE to deliver current density of 10 mA cm−2 in acidic and alkaline mediums, respectively, ascribed to the rich oxygen vacancies facilitating the hydrogen adsorption and its relative recombination, respectively. Additionally, undetectable degradation is observed for CoWO 4-x @C after 10,000 potential cycles indicating high durability. Meanwhile, CoWO 4-x @C requires only 295 mV overpotential to deliver 10 mA cm−2 in the OER test, which is better than the benchmarking IrO 2 (313 mV). 1.57 V comparably lower than Pt/C-IrO 2 (1.59 V) is required for achieving the water splitting current density of 10 mA cm−2 without any degradation for 12 h. [ABSTRACT FROM AUTHOR]