Search

This paper proposes a novel adaptive sliding-mode-based control allocation scheme for accommodating simultaneous actuator faults. The proposed control scheme includes two separate control modules with virtual control part and control allocation part, respectively. As a low-level control module, the control allocation/reallocation scheme is used to distribute/redistribute virtual control signals among the available actuators under fault-free or faulty conditions, respectively. In the case of simultaneous actuator faults, the control allocation and reallocation module may fail to meet the required virtual control signal, which will degrade the overall system stability. The proposed online adaptive scheme can seamlessly adjust the control gains for the high-level sliding mode control module and reconfigure the distribution of control signals to eliminate the effect of the virtual control error and maintain the stability of the closed-loop system. In addition, with the help of the boundary layer for constructing the adaptation law, the overestimation of control gains is avoided, and the adaptation ceases once the sliding variable is within the boundary layer. A significant feature of this study is that the stability of the closed-loop system is guaranteed theoretically in the presence of simultaneous actuator faults. The effectiveness of the proposed control scheme is demonstrated by experimental results based on a modified unmanned multirotor helicopter under both single and simultaneous actuator faults conditions with comparison to a conventional sliding mode controller and a linear quadratic regulator scheme. [ABSTRACT FROM PUBLISHER]

This paper proposes an innovative integrated path planning and trajectory tracking control framework for a quadrotor unmanned aerial vehicle (UAV) in the presence of environmental and systematic uncertainties to achieve integrated guidance and control. Firstly, in order to perform real-time path planning, a computationally cost-effective planning algorithm is designed to find an optimal and smooth path while avoiding both static and dynamic obstacles. Then, by employing the pure-pursuit path following approach, the generated geometric path is converted to a trajectory profile related to time, which serves as the reference commands for the low-level trajectory tracking controller. Finally, a novel adaptive sliding mode trajectory tracking controller is proposed to compensate model uncertainties and maintain the desired tracking performance for the studied quadrotor UAV. With the proposed adaptive schemes, overestimation of uncertain parameters can be avoided, which further contributes to avoiding control chattering of the system. The performance of the proposed framework is validated through comparative simulation and experimental tests based on a quadrotor UAV subject to model uncertainties and environmental obstacles, which confirms the effectiveness and superiority of the proposed approach for practical applications. [ABSTRACT FROM AUTHOR]

In this paper, a quasi-optimal higher order sliding mode control (HOSMC) scheme is designed using disturbance observer (DOB) and adaptive techniques. The overall HOSMC scheme is constituted by three portions: 1) a switch-based quasi-optimal control law that ensures rapid finite-time stabilization of the origin, producing a nominally uncertainty-free system, based on a perturbed chain of integrators; 2) a DOB which estimates the lumped uncertainties with lower frequencies; and 3) an adaptive controller designed to deal with the fast-varying terms of these lumped uncertainties over the pass-band of the DOB. Since the adaptive controller and the DOB work in a cooperative manner, the only requirement is that the switching gain be greater than the bound of the DOB estimation error, instead of the bound of the lumped uncertainties. As a consequence, overestimation in the adaptive controller can be avoided by resorting to the equivalent control. Simulation results confirm the capabilities of the proposed control strategy. [ABSTRACT FROM AUTHOR]

This article proposes a safety control scheme for quadrotor unmanned aerial vehicle (UAV) to counteract ground effect and blade damage. The impacts of ground effect and blade damage are quantitatively analyzed in the established model. The proposed safety control scheme consists of position and attitude loops. Specifically, a proportional and derivative controller is designed as a baseline control with acceleration feedforward in the position loop. A disturbance observer (DO) using the measured Euler angles is exploited to estimate the lumped disturbance forces. The developed DO can effectively mitigate the estimation deviation caused by the angle tracking error. Subsequently, differential flatness theory is used to obtain the Euler angle references and the derivatives. In the attitude loop, sliding mode control and fixed-time sliding mode observer (SMO) are integrated to deal with ground effect and blade damage promptly. To demonstrate the effectiveness of the proposed safety control scheme, flight experiments are carried out, where the quadrotor UAV flies close to the rugged ground in the presence of blade damage. [ABSTRACT FROM AUTHOR]

This paper proposes an active fault-tolerant control strategy for a quadrotor helicopter against actuator faults and model uncertainties while explicitly considering fault estimation errors based on adaptive sliding mode control and recurrent neural networks. Firstly, a novel adaptive sliding mode control is proposed. In virtue of the proposed adaptive schemes, the system tracking performance can be guaranteed in the presence of model uncertainties without stimulating control chattering. Then, due to the fact that model-based fault estimation schemes may fail to correctly estimate fault magnitudes in the presence of model uncertainties, a fault estimation scheme is proposed by designing a parallel bank of recurrent neural networks. With the trained networks, the severity of actuator faults can be precisely estimated. Finally, by synthesizing the proposed fault estimation scheme with the developed adaptive sliding mode control, an active fault-tolerant control mechanism is established. Moreover, the issue of actuator fault estimation error is explicitly considered and compensated by the proposed adaptive sliding mode control. The effectiveness of the proposed active fault-tolerant control strategy is validated through real experiments based on a quadrotor helicopter subject to actuator faults and model uncertainties. Its advantages are demonstrated in comparison with a model-based fault estimator and a conventional adaptive sliding mode control. [ABSTRACT FROM AUTHOR]

A fault-tolerant control approach without rate sensors is presented for the attitude stabilization of a satellite being developed. External disturbances, reaction wheel faults, actuator saturation, and unavailable angular velocity are addressed. A sliding-mode observer is proposed by using attitude feedback only, and the unavailable angular velocity is estimated by this observer in finite time. Using the attitude and the estimated velocity, another sliding-mode observer is proposed to reconstruct actuator faults and disturbances. It is proven that reconstruction with zero observer error is achieved in finite time. With the reconstructed value, a velocity-free controller is then developed to asymptotically stabilize the attitude. Simulation results are also provided to verify the effectiveness of the proposed approach. [ABSTRACT FROM PUBLISHER]

This paper presents a dual adaptive fault-tolerant control strategy for a quadrotor helicopter based on adaptive sliding mode control and adaptive boundary layer. Within the proposed adaptive control strategy, both model uncertainties and actuator faults can be compensated without the knowledge of the uncertainty bounds and fault information. By virtue of the proposed adaptive control scheme, the minimum discontinuous control gain is adopted, which significantly reduces the control chattering effect. As compared to the existing adaptive sliding mode control schemes in the literature, larger actuator faults can be tolerated by employing the proposed control scheme while suppressing control chattering. Moreover, boundary layer is used to smoothen control discontinuity and further eliminate control chattering. Nevertheless, the choice of boundary layer thickness is a trade-off between system stability and tracking accuracy. By explicitly considering this fact, an adaptive boundary layer is developed and synthesized with the proposed adaptive control framework to ensure stability and tracking accuracy of the considered system. When the control parameter tends to be overestimated, the thickness of boundary layer can be appropriately adjusted to avoid control parameter overestimation. Simulation and experimental tests of a quadrotor helicopter are both conducted to validate the effectiveness of the proposed control scheme. Its advantages are demonstrated in comparison with a conventional adaptive sliding mode control scheme. [ABSTRACT FROM AUTHOR]