Search

The rapid introduction of electric vehicles (EVs) in the transportation market has initiated the concept of vehicle-to-grid (V2G) technology in smart grids. However, where V2G technology is intended to facilitate the power grid ancillary services, it could also have an adverse effect on the aging of battery packs in EVs. This is due to the instant depletion of power during the charge and discharge cycles, which could eventually impact the structural complexity and electrochemical operations in the battery pack. To address this situation, a median expectation-based regression approach is proposed for parameter estimation of vehicle batteries in V2G systems. The proposed method is built on the property of uncertainty prediction of Gaussian processes for parameter estimation while considering the cell variations as an exogenous function. First, a median expectation-based Gaussian process model is derived to predict the fused and individual cell variations of a battery pack. Second, a magnitude-squared coherence model is developed by the error matrix to detect and isolate each variation. This is obtained by extracting the cross-spectral densities for the measurements. The proposed regression-based approach is evaluated using experimental measurements collected from lithium-ion battery pack in EVs. The parametric analysis of the battery pack has been verified using D-SAT Chroma 8000ATS hardware platform. Performance evaluation shows an accurate estimation of these dynamics even in the presence of injected faults. [ABSTRACT FROM AUTHOR]

Lightly damped electromechanical oscillations are major operating concerns if failed to be detected at an early stage. This paper improved the existing extended complex Kalman filter (ECKF) technique of tracking electromechanical oscillations using synchrophasor measurements. The proposed algorithm adopted a distributed architecture for estimating oscillatory parameters from local substations. The novelty lies in handling maximum likelihood (ML) to enhance the convergence property in tracking multiple modes using an expectation maximization (EM) approach. This was achieved by encapsulating the augmented Lagrangian (AL) in the maximization step of the EM algorithm, which utilized a novel ECKF-based smoother (ECKS). Performance evaluations were conducted using IEEE 68-bus system and recorded synchrophasor measurements collected from the New Zealand grid. Random noise variance test cases were generated to examine the performance of the proposed algorithm. To ensure the robustness to random noisy conditions, the algorithm was tested based on exhaustive Monte Carlo simulations. Comparisons were made with the existing Prony analysis (PA), Kalman filter (KF), and distributed EM-based FB-KLPF. [ABSTRACT FROM AUTHOR]

This paper improves the existing Kalman-based technique for detecting electromechanical oscillations using Synchrophasor measurements. The novelty is the utilization of a distributed architecture to extract maximum a-posteriori (MAP) estimations of oscillatory parameters. This was achieved by an expectation maximization (EM) algorithm. To improve initial condition estimation, initial correlation information through a forward backward (FB) Kalman-like particle filter (KLPF) was integrated into the proposed scheme. Performance evaluation was conducted using IEEE New England 39-Bus system and Synchrophasor measurements collected from New Zealand Grid. The proposed method accurately extracted oscillatory parameters when the measurements were contaminated by continuous random small load fluctuations. The method also improved the capability of detecting multiple oscillations with similar frequencies. [ABSTRACT FROM PUBLISHER]

In recent years, a compelling need has arisen to understand the effects of distributed information structures on estimation and filtering. In this study, a bibliographical review on distributed Kalman filtering (DKF) is provided. The study contains a classification of different approaches and methods involved to DKF. The applications of DKF are also discussed and explained separately. A comparison of different approaches is briefly carried out. Focuses on the contemporary research are also addressed with emphasis on the practical applications of the techniques. An exhaustive list of publications, linked directly or indirectly to DKF in the open literature, is compiled to provide an overall picture of different developing aspects of this area. [ABSTRACT FROM AUTHOR]

In recent years, a compelling need has arisen to understand the effects of distributed information structures on estimation and filtering. In this study, a bibliographical review on distributed Kalman filtering (DKF) is provided. The study contains a classification of different approaches and methods involved to DKF. The applications of DKF are also discussed and explained separately. A comparison of different approaches is briefly carried out. Focuses on the contemporary research are also addressed with emphasis on the practical applications of the techniques. An exhaustive list of publications, linked directly or indirectly to DKF in the open literature, is compiled to provide an overall picture of different developing aspects of this area. [ABSTRACT FROM AUTHOR]

The generation of the mix-based expansion of modern power grids has urged the utilization of digital infrastructures. The introduction of Substation Automation Systems (SAS), advanced networks and communication technologies have drastically increased the complexity of the power system, which could prone the entire power network to hackers. The exploitation of the cyber security vulnerabilities by an attacker may result in devastating consequences and can leave millions of people in severe power outage. To resolve this issue, this paper presents a network model developed in OPNET that has been subjected to various Denial of Service (DoS) attacks to demonstrate cyber security aspect of an international electrotechnical commission (IEC) 61850 based digital substations. The attack scenarios have exhibited significant increases in the system delay and the prevention of messages, i.e., Generic Object-Oriented Substation Events (GOOSE) and Sampled Measured Values (SMV), from being transmitted within an acceptable time frame. In addition to that, it may cause malfunction of the devices such as unresponsiveness of Intelligent Electronic Devices (IEDs), which could eventually lead to catastrophic scenarios, especially under different fault conditions. The simulation results of this work focus on the DoS attack made on SAS. A detailed set of rigorous case studies have been conducted to demonstrate the effects of these attacks. [ABSTRACT FROM AUTHOR]

The efficiency of a photovoltaic (PV) panels drops significantly in dusty environments. The variation in temperature could have a substantial impact on PV panel cells, which could further lead to high deterioration and eventually permanent damage to the PV material in the presence of dust. To resolve this issue, in this work a novel hydrophobic silicon dioxide (SiO2)-based nanoparticle coating is proposed for the PV panel, to shrink the surface stress developed between the water and the coated facet. Two identical PV modules were installed to conduct comparable experimental tests simultaneously. The first module is coated by the SiO2 nanoparticles, and the second is uncoated and used as a reference. To maintain coherency, the experiments are done in the same environmental conditions, cleaning the PV modules at regular intervals. Results reveal that the accumulated energy generated during this period of study was comprehensively enhanced. Moreover, the self-cleaning property of the hydrophobic surface of the coated panel allowed water droplets to slide smoothly down the PV module surface, carrying dust particles. Useful recommendations are made at the end to enhance the performance of PV panels in dusty environments. [ABSTRACT FROM AUTHOR]