Search

This paper reviews the applications of Internet of Things (IoT) and digital twin technology in electrical power systems. It begins by discussing the generalized IoT value chain, followed by the terminology of smart grid, with clarifying the role of IoT‐systems and the digital twin structure within the Smart Grid. A comparison between different short‐range and long‐range transports is presented. The paper then discusses the use of IoT and digital twin technology for effective energy management with applications in smart homes, smart buildings, smart grids, smart industries (Industry 4.0), smart transportation and smart cities. Additionally, the paper explores the use of IoT and digital twin technology for condition monitoring and diagnosis (CMD) in electrical power systems. Three different cases are presented for CMD, that is, CMD of power transformers, CMD of electrical grids and CMD of substations. IoT and digital twin applications are also highlighted in power electronic systems. Finally, the paper discusses the challenges and opportunities of applying IoT and digital twin technology to electrical power systems and provides recommendations for future research. [ABSTRACT FROM AUTHOR]

High-voltage direct-current (HVDC) transmission systems are considered an outstanding solution due to high electrical losses emerging from long-distance transmission. However, HVDC transmission lines (TLs) are vulnerable to lightning strikes. In this work, the Yunnan-Guizhou 500 kV HVDC transmission system is used as a case study to evaluate the impact of lightning strikes on DC-TL overvoltages, as no research studies have been conducted to assess the lightning transient behavior of DC-TLs. A comprehensive investigation of the 500 kV DC-TL transient performance during lightning strikes is performed, taking into account different technical aspects that have not been studied in detail by previous researchers. Additionally, analysis of the back-flashover phenomenon has not been conducted well in previous work, and results on the effect of changing the lightning strike current peak and tower grounding resistance on shielding-failure flashover are quite limited. The distributed-parameter model is used to represent the DC-TL using the electromagnetic transients program (EMTP), considering real parameters of shielding wires and DC towers to study the lightning impact in the case of back-flashover and shielding-failure phenomena. Lightning strike is applied to the shielding wire, and the impact of increasing the peak value of lightning current is investigated on the back-flashover occurrence. Moreover, the influence of tower grounding resistance variation on the transient overvoltages across the tower body and back-flashover phenomenon is evaluated. From the simulation results, increasing the lightning current peak and grounding resistance results in higher overvoltages across the tower body, which increases the probability of back-flashover. Additionally, the shielding failure of the TL is assumed, and the variation impact of the lightning current peak and grounding resistance on shielding-failure flashover is investigated. The results show that the impact of the lightning current peak has a more significant impact than the grounding resistance in the case of shielding-failure flashover. [ABSTRACT FROM AUTHOR]

Renewables (i.e., solar and wind power) in the Nordic area have highly seasonal characteristics, which severely restrict the wide development of renewables since they can be excessive in summer but insufficient in winter with intermittent outputs. The conventional battery energy storage system (BESS) with short-term adjustment functionality cannot eliminate the seasonal imbalance of renewables. In this regard, a risk-based bi-level planning model is presented to maximize the hosting capacity (HC) of renewables through configuring seasonal hydrogen storage (SHS) and BESS. Specifically, the upper level applies a multi-objective scheme to maximize HC and minimize the investment cost simultaneously. In turn, the lower level is driven by maximizing the profits of the distribution system operator (DSO) with the implementation of price-based demand response (PBDR). Due to forecasting errors of renewables and load resulting from intermittent output and random behaviors, a stochastic programming (SP) method is developed to address and adapt multiple uncertain fluctuations. Moreover, the conditional value-at-risk (CVaR) is introduced to measure the effect of the risks raised by multiple uncertainties on system operation. Finally, numerical studies are employed to verify the effectiveness of the proposed model. Compared to the cases without considering PBDR and SHS, the total renewable energy HC in the proposed model is increased by 2.30 MW and 0.37 MW, respectively, while the yearly cost benefit of DSO is enhanced by 28063.2 US$ and 17823.7 US$, respectively. The promising results demonstrate the empowerment of SHS can promote the cross-seasonal consumption of renewables, effectively maximizing the HC and improving the economic operation of distribution systems. • The hydrogen storage system is considered in this work for the cross-seasonal balance of renewables. • A bi-level planning model is proposed to improve hosting capacity and economic operation of the system. • The coordinated operation of seasonal hydrogen storage, demand response, and battery storage is designed. • The uncertainties and the operation risk brought by renewables and load are considered. [ABSTRACT FROM AUTHOR]

Wind energy integration in power grids is increasing day by day to reduce the use of fossil fuels, and consequently greenhouse gas emissions. Using the pulse-width modulated (PWM) power converters in wind turbine generators, specifically in doubly-fed induction generators, results in generating a common-mode voltage (CMV). This common-mode voltage causes a flow of common-mode current (CMC) that leaks through the stray capacitances in the generator structure. These currents impose a voltage on the generator bearing which may deteriorate them. In the current work, an active common-mode voltage canceler (ACMVC) is developed to eliminate the CMV produced by a PWM converter. The ACMVC generates a compensating voltage at the converter terminals to eliminate the CMV with a subsequent reduction of the voltage stress on the generator bearing. This compensating voltage has the same amplitude as CMV, but opposite polarity. A simulation of the ACMVC model is performed using the PSCAD/EMTDC (Electromagnetic Transient Design and Control) software package. Results confirm the effectiveness of ACMVC in canceling not only the CMV but the CMC and bearing voltage as well. In addition, the relationship between the rise time of CMV and the peak value of CMC is investigated. [ABSTRACT FROM AUTHOR]

As the variety of loads in microgrids continues to grow rapidly, the drawbacks of using conventional voltage and current double closed-loop PI control are becoming increasingly intolerable. These disadvantages include poor static tracking of the output and the need for complicated tuning of optimal PI control parameters. Model predictive control (MPC) is widely studied in recent years and gradually applied to the inverter as a modern control strategy. Currently, the research on MPC mainly focuses on reducing the computational burden of algorithms and improving computing skills. In this paper, the control theory of continuous-control-set model predictive control (CCS-MPC), optimal switching vector model predictive control (OSV-MPC), quasi-sliding mode model predictive control (QS-MPC) and optimal switching sequence model predictive control (OSS-MPC) are elaborated. Also, the disadvantages of adopting conventional voltage and current double closed-loop PI control on microgrids are clarified. Moreover, aiming at evaluating the influence of connecting and/or removing the common loads, such as electric vehicles to the microgrid on the output performance of microgrids in practical engineering applications, single three-phase voltage source inverter with LC filter system with two-phase pure resistance load, three-phase diode rectifier bridge nonlinear load, constant power load and constant current source load applying four different MPC methods, are simulated. The simulation results show that under different types of load, system with nonlinear load applying OSV-MPC method has the biggest value of total harmonic distortion (THD) of the output voltage and the biggest steady state root mean square (RMS) tracking error of the output voltage, which are 1.33% and 2.1 V, respectively. The performances of the output voltage of the system adopting MPC are generally improved compared to the system using conventional voltage and current double close-loop PI control. Regarding the output voltage performance of a system under load step change, a system using the OSS-MPC method with a nonlinear load exhibits the smallest overshoot of the output voltage and the smallest root mean square value of the tracking error (RMSE) between the output voltage and the reference value within 20ms after the load step change. Specifically, the overshoot and RMSE are 2.804 V and 0.810 V, respectively. The simulation results provide valuable guidance for selecting the appropriate model predictive control strategy for microgrid integrating complex loads, such as electric vehicles in practical applications. • Three different kinds of model of three-phase voltage source inverter with LC filter system are established. • Four main types of MPC methods are adopted to the system. • Different types of load are connected to the system. • Output performances in load jump and steady state are compared by simulating in MATLAB/Simulink. [ABSTRACT FROM AUTHOR]

Nowadays, the load monitoring system is an important element in smart buildings to reduce energy consumption. Nonintrusive load monitoring (NILM) is utilized to determine the power consumption of each appliance in smart homes. The main problem of NILM is how to separate each appliance's power from the signal of aggregated consumption. In this regard, this paper presents a combination between particle swarm optimization (PSO) and artificial neural networks (ANNs) to identify electrical appliances for demand‐side management. ANN is applied in NILM as a load identification task, and PSO is used to train the ANN algorithm. This combination enhances the NILM technique's accuracy, which is further verified by experiments on different datasets like Reference Energy Disaggregation Dataset, UK Domestic Appliance‐Level ElectricityUK‐DALE, and Indian data for Ambient Water and electricity Sensing. The high accuracy of the proposed algorithm is verified by comparisons with state of the art methods. Compared with other approaches, the total mean absolute error has decreased from 39.3566 to 18.607. Also, the normalized root mean square error (NRMSE) method has been used to compare the measured and predicted results. The NRMSE is in the range of 1.719%–16.514%, which means perfect consistency. This demonstrates the effectiveness of the proposed approach for home energy management. Furthermore, customer behavior has been studied, considering energy costs during day hours. [ABSTRACT FROM AUTHOR]

Hybrid DC microgrid clusters contain various types of converters such as BOOST, BUCK, and bidirectional DC/DC converters, making the control strategy complex and difficult to achieve plug-and-play. The common master–slave hierarchical control strategy makes it difficult to achieve accurate and stable system control. This paper proposes an accurate peer-to-peer hierarchical control method for the hybrid DC microgrid cluster, and the working principle of this hierarchical control method is analyzed in detail. The microgrid cluster consists of three sub-microgrids, where sub-microgrid A consists of three BUCK converters, sub-microgrid B consists of three BOOST converters, and sub-microgrid C consists of two bidirectional DC/DC converters. According to all possible operations of various sub-microgrids in the microgrid cluster, the top-, mid-, and bottom-level controls are designed to solve the coordination control problem among different types of sub-microgrids. In this paper, a hybrid microgrid cluster simulation model is built in the PLECS simulation environment, and an experimental hardware platform is designed. The simulation and experiment results verified the accuracy of the proposed control strategy and its fast plug-and-play regulation ability for the system. [ABSTRACT FROM AUTHOR]

Due to its strong dependence on weather conditions, photovoltaic (PV) power is highly intermittent in nature. In light of this, this paper introduces a PV power prediction model based on similar-day clustering and temporal convolutional network (TCN) with bidirectional long short-term memory (BiLSTM) model. Firstly, in the data preprocessing stage, improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) method is used to decompose and denoise the original PV power data to obtain subsequences of different frequencies. Subsequently, the sample entropy (SE) method is incorporated to reconstruct the subsequences and generate low-frequency and high-frequency subsequences with more pronounced temporal features. In addition, a self-organizing map (SOM) with the K-means algorithm is used to categorize historical days into four weather types: sunny, cloudy, rainy, and intermittent. Through grey relational analysis (GRA), meteorological factors significantly affecting PV power prediction are identified to construct a multidimensional feature set. During the model prediction phase, historical PV power data and related meteorological impact factors are input into the TCN-BiLSTM model to perform multi-data-driven PV power prediction. Finally, the predicted results of each subsequence are linearly combined to obtain the ultimate PV power prediction. The proposed model is compared with convolutional neural network (CNN)-LSTM, LSTM, and TCN models, achieving a reduction in the root mean square error (RMSE) of 0.129 kW, 0.238 kW, and 0.257 kW, respectively. This demonstrates that the proposed model exhibits superior overall performance in time series modeling and information capture, enhancing the understanding of seasonal, periodic, and irregular patterns in PV power generation data. • ICEEMDAN-SE method for decomposing and denoising PV power generation data. • This results in subsequence with more pronounced temporal features. • SOM-Kmeans to classify historical days into different weather types. • A novel PV power prediction combines similar-day clustering and meteorological factors. • Offering a deeper understanding of seasonal and irregular patterns in PV power data. [ABSTRACT FROM AUTHOR]

Achieving the goal of sustainable development is dependent on the widespread integration of renewable energy sources, energy storage systems (ESSs), and electric vehicles (EVs). However, a continuous increase in the penetration of such elements would bring more complexities to the distribution network. Accordingly, this paper presents a unified planning model comprising renewable energy-based distributed generation (DG), ESS, and electric vehicle charging stations (EVCSs). In this regard, a Latin Hypercube Sampling method is utilized to generate multi-scenario for describing the uncertainty of renewable energy and load demand. The stochastic EV charging behaviors are represented by various probability density functions (PDF). In addition, an exploitable capacity loss of ESS and EV batteries is calculated by the battery degradation model based on the depth of discharge (DOD). Furthermore, the battery degradation cost is incorporated into the objective of the planning model to identify the optimal decision for candidate assets. A piecewise linearization approach is introduced to convert the problem into a mix-integer linear programming (MILP) model. Numerical results demonstrate that the exploitable capacity loss of batteries plays a key role in asset planning and provides potential contributions to the optimal decisions of the distribution network. In the meantime, by considering battery degradation in the optimization model, the sustainability and lifetime of the battery can be preserved. • Uncertainties include the renewable energy, load demand, and behaviors of electric vehicles are considered. • Renewable energy-based DG, ESS, and EVCS are involved in the unified planning model. • The degradation model is proposed to analyze the exploitable capacity loss of ESS and EV battery. • The enhancement of investment decision while maintaining the lifetime of battery is achieved. [ABSTRACT FROM AUTHOR]