Search

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

China has become the world largest paper and paperboard producer. However, pulp and paper industry has involved high resource consumption and severe pollution especially for water. This research has assessed the eco-efficiency of China's pulp and paper industry at the national level and provincial level. An overview regarding the cleaner production of China's pulp and paper industry was presented to reveal the measures for reducing environmental impact in the last two decades. Slacks-based measure was used to analyze the efficiency levels of 16 provinces' pulp and paper industries. To uncover the underlying causes of eco-efficiency performance, Malmquist–Luenberger index was calculated to discover the drivers of productivity growth of pulp and paper industries. Our results showed that the pollution treatment of China's pulp and paper industry has made progress in terms of water consumption and water pollution, although the absolute amount of pollution discharge is still large. Chemical oxygen demand emissions are still the first critical influencing factor of pulp and paper industry's inefficiency. Furthermore, efficiency progress was the dominating contribution of the industry's productivity growth between 2010 and 2013. The policies for adjusting the industrial structure of pulp and paper industry have resulted in the scale effects through eliminating backward production capacity and accelerating merger and acquisitions. Moreover, the productivity of pulp and paper industry was underestimated when the undesirable outputs were ignored. It indicates that the stricter environmental regulations have positive effects on paper companies to internalize environmental pressures in the production activities through environmental management. In the future, pulp and paper companies should further internalize the cost of pollution treatment through scale effects and technology improvement. [ABSTRACT FROM AUTHOR]

Abstract: The objective of this paper is to estimate the energy saving potential in China's paper industry by determining energy intensity under different scenarios. Cointegration model and stability test are applied to formulate the equilibrium equation. Results show that energy price, industry structure, profit margin and technology have significant impact as they are negatively correlated to changes in energy intensity. Three scenarios (BAU (business as usual), intermediate and active) are designed to estimate the future trend of energy intensity in paper industry. In 2010, the energy intensity (energy consumption per unit of value added) was 4 tce/10,000 RMB, and by the scenarios it is expected to considerably decline. According to the BAU (business as usual) scenario, the energy intensity will decrease to 2.56, 1.43 and 0.70 tce/10,000 RMB by 2015, 2020 and 2025, respectively. With respect to the intermediate scenario it is expected to drop further to 0.44 tce/10,000 RMB. Yet by the active scenario, the energy intensity is expected to considerably decline to 0.36 tce/10,000 RMB by 2025. Using the BAU forecast as a baseline, the quantity of energy savings is estimated to be 185.6 billion tce by 2025. Considering this important potential, we also provided some policy suggestions. [Copyright &y& Elsevier]

In 2017, a carbon emissions trading market will be launched nationwide by the China government. Calculating the enterprise carbon emissions is an important prerequisite and basis for trading. This paper discussed types of greenhouse gases, calculation boundaries and methods, energy consumption, carbon emissions, and intensity of a representative integrated pulp and paper mill in China based on China Guidance and Greenhouse Gas Protocol Tools. The results showed that there were 435,000 tonnes (t) of CO2 emissions from that mill in 2014 that did not contain emissions of biomass energy, which was 8 times higher than that of fossil energy. The pulp carbon intensity based on the mill was 0.230 t CO2/Adt, which accounted for 7.50% to 57.4% in other pulps' based on the product. Intensity based on Gross Domestic Product (GDP) was 1.090 t CO2e/1000 USD and accounted for 56.8% intensity in the China paper industry. The intensity based on sales accounted for 52.6% in the firstclass enterprise in the developed country. It also showed that intensity was influenced by the species of raw material, energy, and products, which provided the mill with measures for energy saving and emissions reduction to obtain the redundant carbon emissions in the trading. [ABSTRACT FROM AUTHOR]

Abstract: The pulp and paper industry is one of the most energy-intensive industries worldwide. In 2007, it accounted for 5% of total global industrial energy consumption and 2% of direct industrial carbon dioxide (CO2) emissions. An energy audit is a primary step toward improving energy efficiency at the facility level. This paper describes a plant-wide energy audit aimed at identifying energy conservation and CO2 mitigation opportunities at a paper mill in Guangdong province, China. We describe the energy audit methods, relevant Chinese standards, methods of calculating energy and carbon indicators, baseline energy consumption and CO2 emissions of the audited paper mill, and nine energy-efficiency improvement opportunities identified by the audit. For each of the nine options, we evaluate the energy conservation and associated CO2 mitigation potential. The total technical energy conservation potential for these nine opportunities is 967.8terajoules (TJ), and the total CO2 mitigation potential is equal to 93,453tonnes CO2 annually, representing 14.4% and 14.7%, respectively, of the mill’s total energy consumption and CO2 emissions during the audit period. [Copyright &y& Elsevier]

With the development of energy technology, hydrogen is gradually becoming widely used. China is also rapidly developing its own hydrogen energy industry in an effort to accomplish the "dual carbon target'. Hydrogen from methane is one of the mainstream sources, of which hydrogen from methane cracking is the decomposition of methane into hydrogen and solid carbon, with the solid carbon also having a high economic value. In particular, this technology does not emit carbon dioxide, which is very friendly to the environment, but it cannot avoid larger energy consumption. In contrast, hydrogen production from methane cracking driven by solar energy not only combines the characteristics of no CO 2 emission, but also greatly reduces the consumption of primary energy, which is the future development trend of hydrogen production from methane. This paper provides a brief overview of the various technological pathways for methane to hydrogen production in the context of China's actual development, focusing on the current status of the development and application of solar methane cracking to hydrogen production technologies at home and abroad. Among them, this paper mainly discusses the characteristics of solar reactors of different sizes and structures, and summarizes the results of related optimization studies. Meanwhile, the application of catalysts in solar reactors and the problem of carbon deposition are analyzed, and the practical application of solar methane cracking hydrogen production system is outlined. Finally, the future development of solar methane cracking hydrogen production technology is prospected from the national situation of China. [Display omitted] • Solar methane cracking for hydrogen can reduce emissions and energy consumption. • The current state of research on solar reactors is summarized. • Solar methane cracking requires higher performing catalysts. • Providing insights into the future development of solar methane cracking in China. [ABSTRACT FROM AUTHOR]

The electric power sector is the primary contributor to carbon emissions in China. Considering the context of dual carbon goals, this paper examines carbon emissions within China's electricity sector. The research utilizes the LMDI approach for methodological rigor. The results show that the cumulative contribution of economies scale, power consumption factors and energy structure are 114.91%, 85.17% and 0.94%, which contribute to the increase of carbon emissions, the cumulative contribution of power generation efficiency and ratio of power dissipation to generation factor are -19.15% and -0.01%, which promotes the carbon reduction. The decomposition analysis highlights the significant influence of economic scale on carbon emissions in the electricity industry, among the seven factors investigated. Meanwhile, STIRPAT model, Logistic model and GM(1,1) model are used to predict carbon emissions, the average relative error between actual carbon emissions and the predicted values are 0.23%, 8.72% and 7.05%, which indicates that STIRPAT model is more suitable for medium- to long-term predictions. Based on these findings, the paper proposes practical suggestions to reduce carbon emissions and achieve the dual carbon goals of the power industry. [ABSTRACT FROM AUTHOR]

The behaviors of local governments can affect the enforcement of environmental regulations. Environmental regulation can influence the behaviour of energy-intensive enterprises. This paper examines the relationship between local government competition, environmental regulation and the investment efficiency of high energy consuming firms using a basic panel regression and moderating effects model based on data from 2011-2020 for high energy consuming firms in China. The paper found that local government competition and environmental regulation can promote increased investment efficiency in energy-intensive firms in the short term. However, environmental regulation is not beneficial to investment efficiency in the long run. Local government competition plays a positive moderating role in the impact of environmental regulation on the investment efficiency of high energy consuming firms. There is a threshold effect on the role of local government competition. When the level of government competition exceeds 2.097, it has a negative impact on the investment efficiency. We further test for heterogeneity and we find that this promotion effect is also more obvious in areas with high environmental taxes and low marketability. Finally, we provide constructive suggestions for the development of government and the improvement of the investment efficiency of high energyconsuming firms. [ABSTRACT FROM AUTHOR]

Papermaking is a water intensive industry. The growth of paper demand will further intensify the need of fresh water resources. Papermaking involves complex processing routes. Previous investigations of water consumption in papermaking industry have focused primarily on key processes and pathways, ignoring the impacts of many intermediate and inter-related processes in paper production cycles and there underestimating the sustainability impacts. Herein, the results of a life cycle analysis of water consumption for papermaking industry in China using an extensive system boundary that includes the water embedded in intermediate processing are presented. The results show the life cycle water consumption and water saving potentials for different papermaking pathways. The advocacy of "forest pulp and paper integration" may have few practical contribution to reducing water consumption due to the low indirect water consumption of raw materials and energy for transportation. [ABSTRACT FROM AUTHOR]

Effective forecasting of energy consumption structure is vital for China to reach its "dual carbon" objective. However, little attention has been paid to existing studies on the holistic nature and internal properties of energy consumption structure. Therefore, this paper incorporates the theory of compositional data into the study of energy consumption structure, which not only takes into account the specificity of the internal features of the structure, but also digs deeper into the relative information. Meanwhile, based on the minimization theory of squares of the Aitchison distance in the compositional data, a combined model based on the three single models, namely the metabolism grey model (MGM), back-propagation neural network (BPNN) model, and autoregressive integrated moving average (ARIMA) model, is structured in this paper. The forecast results of the energy consumption structure in 2023–2040 indicate that the future energy consumption structure of China will evolve towards a more diversified pattern, but the proportion of natural gas and non-fossil energy has yet to meet the policy goals set by the government. This paper not only suggests that compositional data from joint prediction models have a high applicability value in the energy sector, but also has some theoretical significance for adapting and improving the energy consumption structure in China. [ABSTRACT FROM AUTHOR]

Given the increasing severity of energy shortages, the exploration of effective strategies to optimize energy structures has become imperative. This requires careful consideration of energy consumption patterns, especially since these data are fundamental inputs for policy formulation. Given the uncertainty in the rate of change in energy consumption, this paper proposes an optimized multivariable grey Bernoulli model that is rooted in the grey Bernoulli model and incorporates background values and genetic algorithms. The grey Bernoulli model effectively linearizes nonlinear problems, thus simplifying computational procedures. In addition, to account for random fluctuations of relevant factors that may affect the model's predictions, this model introduces nonlinear correction terms that allow simulation and prediction values to adhere to the grey index law. The incorporation of background values enhances the model's ability to process information, providing it with a superior grasp of real data. Genetic algorithms can be used to refine the model's parameters, increasing its adaptability and precision. Finally, this paper applies the refined model to examine China's energy consumption patterns, validating its efficacy and versatility. Furthermore, energy consumption patterns for the next four years are forecast, with the analysis revealing that the growth rate of energy consumption from 2021 to 2024 shows a downward trend, particularly notable in 2024, where the growth rate is 1.64%. [ABSTRACT FROM AUTHOR]

Since the power generation structures and load characteristics in each province in China are quite different, the distribution of peak regulating resources and demands are extremely imbalance. Restricted by a low power marketization degree, peak regulating resource shortages, and transmission channel blocks, the efficient utilization of new energy is facing greater pressures. In order to improve the mutual aid in regional power grids and to obtain more precise simulation results, this paper proposes a two-layer optimization dispatching model, considering the mutual aid of peak regulation resources between each province. It determines the optimal startup mode and the units' power output in each province and obtains the power output arrangements for all the units and the technical and economic indicators. The model and the solution method are original and innovative. And it effectively solved the unequal distribution problem between the peak regulating demands and resources of each provincial power grid. Finally, taking an actual regional power grid in China as an example, the simulation results show that the proposed model can significantly improve the utilization rate of new energy, which verifies the effectiveness and feasibility of the proposed model and methods presented in this paper. [ABSTRACT FROM AUTHOR]

To reduce energy use and achieve a low carbon production in pulp and paper industry (PPI), it is essential to improve energy efficiency in pulp and paper production. In this study, the energy savings from the PPI were estimated based on a techno-economic analysis by EAGER tool for PPI at the factory level. The structure and implement procedure were introduced initially. Two typical pulp and paper mills from China were determined to estimate the impact of selected energy efficiency technologies (EETs) on energy savings as the cases in the base year. One Factory (A) only produced paper products (i.e. corrugated paper and Kraft linerboard) while the other Factory (B) also produced market pulp besides sack paper. In totally 22 selected EETs were applied to assess their saving potential in Factory A, and 29 measures were applied in Factory B. The results show that 2290 TJ and 1179 TJ of final energy could be saved annually in Factory A and B, corresponding to reduction of 29.4% and 13.6% total energy consumption respectively for the case factories. The CO 2 reduction potential was 32.3% for Factory A compared with that of 16.6% in Factory B. It suggests that the pulp and paper mills should encouraged to use this method estimating energy saving potential, and improve their energy efficiency with suggested measures in order to reduce energy consumption and related carbon emissions further in the coming years. • Energy savings of pulp and paper production were estimated at the factory level. • A techno-economic evaluation tool was applied to access the energy savings and carbon emission reductions. • Two typical pulp and paper factories from China were investigated to estimate their energy savings in the base year. • It is useful to assess energy savings and select feasible EETs in achieving energy saving and emission reduction targets. [ABSTRACT FROM AUTHOR]

Daytime subambient radiative cooling is a most promising alternative to electricity-free building cooling. However, optical performance degradation arising from surface contamination and inevitable parasitic heat gain still pose unprecedented challenges to cool building at subambient temperatures. This paper proposed a superhydrophobic cellulose aerogel cooler (SHB-CAC) as building envelope by integrating self-cleaning capacity, passive daytime radiative cooling and thermal insulation to reduce environmental heat gain. The SHB-CAC demonstrates high solar reflectance (93%) and long-wave infrared emittance (91%), accomplishing a temperature drop of 8.5 °C lower than the ambient under sunlight of 800 W/m2 in the outdoor experiment. Notably, the SHB-CAC possesses low thermal conductivity (28 mW/(m∙K)) that suppresses parasitic heat gain from warmer surrounding and reduces cooling energy consumption. The self-cleaning property resulting from superhydrophobicity protects SHB-CAC from water wetting and dust contamination but also maintains its good surface radiation capacities under different humidity environment. A building energy simulation was conducted and results showed that 43.4% of cooling energy on average could be saved compared to the building baseline consumption, if SHB-CAC was widely used in China, indicating that the strategy of optical and thermal conductivity management of cooler has the potential to reduce the energy consumption of buildings. [Display omitted] • Waste paper is converted into aerogel cooler for building cooling. • High R solar and ε IR , thermal insulation, and self-clean are achieved in one design. • The aerogel achieves a high sub-ambient temperature drop of ∼8.5 °C on daytime. • The aerogel shows that 43.4% of cooling energy could be saved. [ABSTRACT FROM AUTHOR]

This paper introduces an innovative cooperative model for energy efficiency retrofitting that incorporates carbon emission rights, addressing critical financial constraints in Energy Performance Contracting (EPC). By employing the fuzzy analytic hierarchy process (F-AHP) to evaluate risk assessment indicators and stakeholder contributions and utilizing the enhanced Shapley method for equitable benefit distribution, the model demonstrates significant improvements in financing and efficiency for energy conservation projects. The findings are as follows: (1) the energy efficiency retrofit model, which integrates carbon emission rights, effectively alleviates the financial constraints and fosters energy conservation and emission reduction in guaranteed-savings EPC projects; (2) the enhanced Shapley method is deemed appropriate for the equitable distribution of energy-saving benefits among stakeholders; (3) when compared with the traditional model and the benefit allocation-absent carbon rights, the energy-saving benefits of the energy efficiency retrofit model incorporating carbon emission rights are higher in individual and overall terms. The findings of this study offer a viable solution to financing challenges faced by stakeholders in such projects and delineate a pragmatic approach for enterprises to enhance energy efficiency and reduce emissions. [ABSTRACT FROM AUTHOR]

China's total energy consumption and production rank first in the world. However, China's energy structure is not reasonable. Therefore, accurate prediction of future energy trends is of great significance for the Chinese government to adjust the energy structure. In this paper, we propose an optimized Grey Euler model with polynomial term, which is abbreviated as OSGEM(1,1,N), to forecast the total energy consumption and production of China in comparison with the commonly used prediction models. The data from 2002 to 2018 are used to simulate the parameters in the proposed model, and the data from 2019 to 2021 are used to test the improved approach. The results show that the OSGEM(1,1,N) model outperforms the other models. Finally, the OSGEM(1,1,N) model is used to forecast the total energy consumption of China from 2022 to 2025 and different results from the previous research results have been obtained. [ABSTRACT FROM AUTHOR]

CO2 capture from coal power plants is an important and necessary solution to realizing carbon neutrality in China, but CCS demonstration deployment in power sector is far behind expectations. Hence, the reduction potential of energy consumption and cost for CCS and its competitiveness to renewable powers are very important to make roadmaps and policies toward carbon neutrality. Unlike the popular recognition that capturing CO2 from flue gases is technically and commercially mature, this paper notes that it has been proved to be technically feasible but far beyond technology maturity and high energy penalty leads to its immaturity and therefore causes high cost. Additionally, the potential energy penalty reduction of capture is investigated thermodynamically, and future CO2 avoidance cost is predicted and compared to renewable power (solar PV and onshore wind power). Results show that energy penalty for CO2 capture can be reduced by 48%-57%. When installation capacity reaches a similar scale to that of solar PV in China (250 GW), CO2 capture cost in coal power plants can be reduced from the current 28-40 US$/ton to 10-20 US$/ton, and efficiency upgrade contributes to 67%-75% in cost reduction for high coal price conditions. In China, CO2 capture in coal power plants can be cost competitive with solar PV and onshore wind power. But it is worth noting that the importance and share of CCS role in CO2 emission reduction is decreasing since renewable power is already well deployed and there is still a lack of large-scale CO2 capture demonstrations in China. Innovative capture technologies with low energy penalties need to be developed to promote CCS. Results in this work can provide informative references for making roadmaps and policies regarding CO2 emission reductions that contribute towards carbon neutrality. [ABSTRACT FROM AUTHOR]

Knowledge of wind field characteristics and variation principles in complex topographical regions is of great importance for the development of numerical prediction models, aviation safety support, and wind energy utilization. However, there has been limited research focused on the lower-tropospheric wind fields in the Qinghai-Tibet Plateau. This paper aims to study the wind characteristics, vertical distributions, and temporal variations in the northeast of the plateau by analyzing a four-year continuous dataset collected from a Doppler wind LiDAR deployed in Xining, Qinghai Province of China. The results indicate that the prevailing horizontal wind direction in the low levels is primarily influenced by the mountain-valley wind circulation. However, as the altitude increases, the prevailing winds are predominantly affected by the westerlies. From a diurnal perspective, noticeable transition processes between up-valley and down-valley winds can be observed. The west-northwest wind (down-valley wind) dominates from late night to morning, while the east-southeast wind (up-valley wind) prevails from afternoon to early evening. The vertical winds in the low levels exhibit a downward motion during the daytime and an upward motion during the nighttime. In this plateau valley, the wind shear exponent is found to be highest in spring and lowest in winter, and it is generally lower during the daytime compared to the nighttime. [ABSTRACT FROM AUTHOR]

• A distribution dynamics approach is employed to examine the converge of TFEE across Chinese PAA level cities. • The findings show a clear convergence in TFEE. • Convergence comes more from efficiency drops in high TFEE cities than from efficiency gains in low TFEE cities. • The environmental protection polices in key cities improved energy efficiency. • Large-sized cities show better performance in energy efficiency than small- and medium-sized cities. Improving energy efficiency is considered the most direct route to reducing carbon emissions on a massive scale. To examine the long-run trend of China's energy efficiency, this paper employs a distribution dynamics approach to analyze the convergence of total-factor energy efficiency (TFEE) across 286 Chinese cities between 2002 and 2014. The result suggests the existence of convergence, which comes more from the efficiency declines in the high TFEE cities rather than the efficiency gains in the low TFEE cities. Despite the fact that a few cities have performed well in energy efficiency, the majority of cities have converged to a low-efficiency point. Further analyses show that the inefficiency was attributed to inefficient energy use in small- and medium-sized cities. Our analysis provides strong scientific support for China's ongoing energy conservation and environmental protection policies. [ABSTRACT FROM AUTHOR]

The government's environmental protection policy can significantly contribute to alleviating resource shortages and curbing environmental pollution, but the impact of various policy instruments implemented by the government on energy efficiency is unclear. Based on the panel data of 30 provinces in China from 2005 to 2021, this paper analyses the impact of environmental regulation and the industrial structure on energy efficiency from the perspective of resource taxes. The U-shaped relationship between environmental regulation and energy efficiency and between the optimization of industrial structure can significantly improve energy efficiency, and the optimization of industrial structure is conducive to weakening the initial inhibitory effect of environmental regulation. In addition, the analysis of regional heterogeneity showed that the impact of environmental regulation was stronger in the central and western regions, while the impact of industrial structure was stronger in the eastern and western regions. The conclusions of this study can help to expand the understanding of the relationship between environmental regulation and industrial structure on energy efficiency, provide policy enlightenment for the realization of green development and high-quality development, and provide Chinese examples and experiences for developing countries to improve energy efficiency. [ABSTRACT FROM AUTHOR]

Ensuring optimal building performance is vital for enhancing student activity comfort and fostering energy-saving initiatives toward low-carbon objectives. This paper focuses on university student centers in China, aiming to diminish building energy consumption while enhancing indoor thermal comfort. Parametric modeling of typical cases is executed using the Grasshopper 1.0.0007 software package, and the simulation of building energy consumption and indoor thermal comfort relies on the Ladybug and Honeybee plug-in. Employing a multi-objective optimization design method and the Octopus multi-objective optimization algorithm, this study integrates numerical simulations and on-site surveys to analyze how factors like building form, orientation, envelope structure, and others impact the indoor and outdoor environment. A comprehensive optimization design approach is implemented for the building's exterior components, including the walls, windows, roof, and shading system. After conducting a comparative analysis of the annual comprehensive energy consumption and indoor thermal comfort before and after the optimization plan, it is determined that implementing these measures reduces the annual comprehensive energy consumption of the building under study by 58.8% and extends the duration of indoor thermal comfort by 53.0%. This study presents a practical optimization design methodology for university student center architecture in China, aiding architects in decision making and advocating for energy-efficient building designs. [ABSTRACT FROM AUTHOR]

All provinces of China respond to the central government, predict future carbon dioxide emissions, and formulate action plans detailing how the province intends to fulfill its target of carbon emission peaking before 2030. Based on the bottom‐up energy consumption prediction and top‐down goal verification, this paper constructs a set of regional carbon dioxide emission prediction methods. Compared to the traditional bottom‐up prediction method, this method could simplify the parameters while improving the prediction accuracy. This model is used to predict and analyze the process of carbon dioxide emission peaking in Zhejiang. The results show that the mean absolute percentage error of the retrospective prediction value is only 1.56%. Zhejiang will reach carbon dioxide emission peaking around 2029–2030, and the peak value will be 569.7 million tons. Different factors have different effects on the process of carbon dioxide emission peaking. There is a strong correlation between the peak time of carbon dioxide emission and the production time of major energy‐consuming projects in Zhejiang. Meanwhile, if the 16 nuclear reactors are not put into operation, Zhejiang will not be able to achieve the goal of carbon dioxide emission peaking. Besides, the basic data used in this model is mainly from the local statistical departments of the region. Thus, it can be applied to other provinces and regions conveniently. [ABSTRACT FROM AUTHOR]

China, a country with a long-standing agricultural legacy, is increasingly prioritizing the reduction of CO2 emissions from its agricultural sector. Initially, the carbon emission sources within the agricultural sector are classified into two categories: direct and indirect emissions. Using this classification, the study calculates the generalized agricultural carbon emissions (GACEs) of 30 provinces in China between 2011 and 2020. To further understand the factors influencing GACEs, the paper employs the logarithmic mean Divisia index method and Tapio decoupling index to analyze seven key factors. These factors include carbon emission intensity, energy consumption of generalized agriculture, and economic benefit level of energy consumption. By comparing the impact and changes of GACEs during the 12th and 13th five-year plan periods, the study reveals valuable insights. The findings suggest that carbon emission intensity plays a crucial role in suppressing GACEs, while the level of economic development acts as a catalyst for their increase. By effectively managing these influencing factors, the paper proposes that the increase in GACEs can be effectively suppressed, and the achievement of agricultural CO2 reduction goals can be expedited. [ABSTRACT FROM AUTHOR]

Cold-chain logistics presents significant challenges to sustainable development in terms of economics, society, and the environment. To address this issue, this paper focuses on solving a real-world problem—the multipath location-routing problem-based cold-chain logistics (MPLRPCCL), which considers soft time windows and heterogeneous fleets. The mathematical model aims to optimize the total logistics costs, including fuel consumption, carbon emissions, cargo deterioration, penalties, operating depots, and renting fleets. To effectively solve this problem, the paper proposes three versions of a memetic algorithm (MA) that incorporate control modules for monitoring the MA's performance and improving its global optimization performance. Computational evaluations were conducted, and the results show that the proposed algorithms are effective and outperform the classic MA framework. Furthermore, the proposed model and algorithms were applied to real-world cases in Hangzhou city, China, demonstrating their practical applicability. Overall, this paper offers a promising approach to tackling the complex challenges posed by cold-chain logistics and contributes to the sustainable development of this important field. [ABSTRACT FROM AUTHOR]

This paper investigates whether and how tax and fee support policies at the firm level in China influence the total factor energy productivity of enterprises. Using panel data from Chinese public trading companies for the period 2004–2020, this study employs a panel model for estimation. The findings suggest that tax rebates contribute to the improvement of the total factor energy productivity of enterprises. Specifically, a 1% increase in tax refunds leads to a growth of approximately 0.008% in total factor energy productivity. Robustness tests and endogeneity checks confirm the validity of the results. Heterogeneity analysis reveals that tax rebates have a significant impact on state-owned enterprises, small- and medium-sized enterprises, and non-technology firms in terms of enhancing their total factor energy productivity. Mechanism analysis indicates that tax rebates facilitate firms in alleviating financing constraints and enhancing their innovation capabilities, thereby improving energy efficiency. The research findings of this paper provide empirical support for optimizing policy supply, improving energy usage efficiency, and promoting the development of a globally sustainable economy. [ABSTRACT FROM AUTHOR]

Carbon neutrality is the only way for green low-carbon development. Technological progress is an important starting point for improving energy efficiency. Through scientific and technological innovation, improving energy efficiency is a practical way to achieve the goal of carbon neutralization. Due to the limitation of data and index selection, there is no qualitative analysis of carbon neutrality in this paper. Compared with previous studies, the paper has the following contributions: Firstly, the energy efficiency score of China's provincial level is measured with the DEA method and it is found that the average energy efficiency score of the eastern region is the highest, followed by the western region, and finally the central region. The results also show that the energy efficiency is not in accordance with the economic growth. The regions with higher energy efficiency scores are not always economically developed because of huge energy consumption supporting the economic development. Secondly, the Tobit method is used to study the impact of the reverse technology spillover effect of OFDI on China's energy efficiency. The results show that the spillover effect has a significant positive effect on the improvement of China's energy efficiency, and has a positive impact on the eastern and western regions, but has no significant impact on the western region. Finally, we put forward some policy recommendations to increase energy efficiency to approach carbon neutrality and thus promote green economic development. This paper enriches the content of energy economy, the research method is innovative, and the conclusion is more scientific. [ABSTRACT FROM AUTHOR]

The highlighted energy consumption of Internet data center (IDC) in China has become a pressing issue with the implementation of the Chinese dual carbon strategic goal. This paper provides a comprehensive review of cooling technologies for IDC, including air cooling, free cooling, liquid cooling, thermal energy storage cooling and building envelope. Firstly, the environmental requirements for the computer room and the main energy consumption items for IDC are analyzed. The evaluation indicators and government policies for promoting green IDC are also summarized. Next, the traditional cooling technology is compared to four new cooling technologies to find effective methods to maximize energy efficiency in IDC. The results show that traditional cooling consumes a significant amount of energy and has low energy efficiency. The application of free cooling can greatly improve the energy efficiency of IDC, but its actual implementation is highly dependent on geographical and climatic conditions. Liquid cooling, on the other hand, has higher energy efficiency and lower PUE compared to other cooling technologies, especially for high heat density servers. However, it is not yet mature and its engineering application is not widespread. In addition, thermal energy storage (TES) based cooling offers higher energy efficiency but must be coupled with other cooling technologies. Energy savings can also be achieved through building envelope improvements. Considering the investment and recovery period for IDC, it is essential to seek efficient cooling solutions that are suitable for IDC and take into account factors such as IDC scale, climate conditions, maintenance requirements, etc. This paper serves as a reference for the construction and development of green IDC in China. [ABSTRACT FROM AUTHOR]

Since their inception with Bitcoin in the late 2000s, cryptocurrencies have grown exponentially, reshaping traditional financial paradigms. This transformative journey, while innovative, brings forth pressing concerns about their energy consumption and carbon footprint. While many studies tend to zoom in on Bitcoin, this paper broadens the perspective by evaluating energy consumption across various cryptocurrencies. We analyze nine cryptocurrency projects, chosen for their market value, technology, and data availability. These span a spectrum from pioneering to emerging digital coins, offering a holistic view of the crypto realm. To contextualize, we juxtapose the energy usage of these digital currencies with traditional payment means like Visa and Mastercard. Our analysis shows vast differences in energy use among cryptocurrencies, largely tied to their consensus algorithms. Notably, while Bitcoin stands out as highly energy-intensive, several newer digital currencies have energy footprints mirroring those of conventional payment methods. Additionally, CO2 emissions estimation presents challenges due to variances in miner locations and regional energy sources, with potential higher emissions if concentrated in carbon-intensive regions like China. Nonetheless, the silver lining emerges as many cryptocurrencies, especially those beyond Bitcoin, register considerably lower CO2 emissions. By moving the lens beyond Bitcoin, this paper paints a more nuanced picture of the environmental ramifications of the crypto world. [ABSTRACT FROM AUTHOR]

• We study the relationship between GVC embedding and carbon emission density. • A mediation effect model was established to test the mechanism. • There is a U-shaped relationship between urban GVC embedding and carbon emission density. To achieve its carbon peak and neutrality plan, whether China's global value chain (GVC) embedding has a carbon emission reduction effect is a question worthy of attention. This paper measures the GVC embedding degree of 218 Chinese cities from 2000 to 2016, and constructs a panel data model to investigate the impact and its mechanism of GVC embedding on carbon emission intensity. This study finds that there is a significant U-shaped relationship between GVC embedding and carbon emission intensity, and a series of robustness test results support this conclusion. Export scale, energy consumption structure and technological innovation play a mediation role in the impact path of GVC embedding on carbon emission intensity. Based on this, this paper proposes that while participating in GVC, China needs to actively utilize the emission reduction effect of GVC, promote the transformation of export mode to high quality, reduce the use and dependence on high-carbon resources such as coal, and encourage companies to innovate. [ABSTRACT FROM AUTHOR]

With large-scale grid-connected renewable energy, new power systems require more flexible and reliable energy storage power sources. Pumped storage stations play an important role in peak shaving, valley filling, and promoting renewable energy consumption. This paper presents the reasonable energy-abandonment operation of a combined power generation system (CPGS), in which a pumped storage station is the core control power, with an ultra-high proportion of renewable energy. Firstly, based on the seasonal characteristics of wind, solar, and load demand, typical days are selected through improved clustering analysis algorithms. Then, a daily optimal scheduling model for combined power generation systems (CPGS) is developed with the goals of economy, low-carbon, and stable operation. Finally, the correlation between the energy-abandonment rate and pumped storage station peak shaving and system optimization operation indicators is obtained by a reasonable energy-abandonment calculation method considering source-grid-load coordination. Taking the operation data of an energy base in the western region of China as an example, when the penetration rate of renewable energy is 60–70% in the future, the operating cost on the power side is greatly affected by the construction of the source side. When the system operates at a planned reasonable energy-abandonment rate of 2%, electricity regulation, load tracking, and daily operating costs all show better performance. [ABSTRACT FROM AUTHOR]

The severe global warming issue currently threatens humans' existence and development. Countries and international organizations have effectively implemented policies to reduce carbon emissions and investigate low-carbon growth strategies. Reducing carbon emissions is a hot topic that academics and government policy-making departments are concerned about.Through necessary condition analysis (NCA) and fuzzy set qualitative comparative analysis(fsQCA), this paper investigates local governments' configuration linkage effect and path choice to improve carbon emission performance from six dimensions: energy consumption, industrial structure, technological innovation, government support, economic development, and demographic factors. The research findings include the following: (1) Individual condition does not represent necessary conditions for the government's carbon performance. Among the two sets of second-order equivalence configurations(S and Q) (five high-level carbon performance configurations), those dominated by economic development or low energy consumption can produce high-level carbon performance. Therefore, the six antecedent conditions dimensions work together to explain how the government can create high levels of carbon performance. (2)According to the regional comparison, China's eastern, central, and western regions exhibit similarities and differences in the driving forces behind high carbon emission performance. All three regions can demonstrate carbon emission performance when all the factors are combined. However, when constrained by the conditions of each region's resource endowment, the eastern region emphasizes the advantage of economic and technological innovation, the central region favors government support and demographic factors, and the western region prefers upgrading industrial structure based on a specific level of economic development. [ABSTRACT FROM AUTHOR]

Recycling carbon tax revenue is a significant part of the design of a nation's carbon tax system. The impact of different recycling principles on the socio-economy and carbon emission reduction varies greatly. Under the background of China's goal of reaching peak carbon emissions, this paper designed three carbon tax recycling principles based on the goal of Nationally Determined Contributions (NDCs), including recycling principles based on output ratio, export ratio, and carbon intensity. A recursively dynamic CGE model was developed in this study to evaluate the economic effects of these three carbon tax recycling principles based on tax neutrality under China's goal of reaching peak carbon emissions. Carbon tax recycling measures could mitigate the economic losses caused by carbon tax, and the results could be greatly affected according to different recycling principles. The results showed that: 1 The recycling principle based on output ratio could reduce economic losses and improve households' social welfare. 2 China's carbon intensity in 2030 could be reduced by more than 65% compared with that in 2005, and the proportion of non-fossil energy in primary energy consumption could reach 25% using the recycling principle based on carbon intensity, but the economic loss mitigation effect of the recycling measures based on this principle was small. 3 Adopting the recycling principle based on export ratio would narrow the competitive gap between China and foreign countries, and the exports of high-carbon-intensity goods would not increase under this principle. 4 According to principles based on output ratio and export ratio, the NDC goal of non-fossil energy accounting for about 25% of primary energy consumption by 2030 could not be achieved, and only the NDC goal of reducing carbon emissions per unit of GDP by more than 65% compared with that of 2005 could be achieved. In brief, as an essential policy tool to achieve China's goal of reaching peak carbon emissions, the carbon tax should be implemented as soon as possible. At the same time, according to China's national conditions, a targeted choice of carbon tax recycling principle is needed. The role of the carbon tax in the process of achieving the goal of Nationally Determined Contributions should be fully utilized. [ABSTRACT FROM AUTHOR]

The significant acceleration of China's urbanization process has greatly promoted economic development. At the same time, the massive construction of urban buildings has also caused many problems such as environmental pollution and increased energy consumption. Therefore, in architectural design, it is particularly important to pay attention to the sustainable development of the environment, handle the relationship between good people and nature under the guidance of the concept of green development, and focus on the recycling of resources. Focusing on resource utilization in architectural design and based on certain planning can better control the construction process of urban buildings, save energy consumption, reduce construction costs, and contribute to the green development of cities. The comprehensive evaluation of energy conservation and emission reduction of construction projects is a classical MAGDM problems. Recently, the Logarithmic TODIM (LogTODIM) method has been employed to cope with MAGDM issues. The single-valued neutrosophic sets (SVNSs) are used as a tool for characterizing uncertain information during the comprehensive evaluation of energy conservation and emission reduction of construction projects. In this paper, the single-valued neutrosophic number Logarithmic TODIM (SVNN-LogTODIM) method is built to solve the MAGDM under SVNSs. In the end, a numerical case study for comprehensive evaluation of energy conservation and emission reduction of construction projects is given to validate the proposed method. [ABSTRACT FROM AUTHOR]

After the carbon peaking and carbon neutrality goals were proposed, different institutions and scholars carried out research on China's medium- and long-term mitigation pathways. Through the literature review of China's research on carbon neutrality, this paper finds that the zero-carbon energy transition is the key to achieving carbon neutrality. The main driving factors of reducing energy-related carbon emissions include the cleanliness of primary and secondary energy supply systems, the electrification of energy consumption and the development of hydrogen energy, energy efficiency improvement, carbon capture and storage (CCS), and negative emissions. Furthermore, based on the literature, this paper conducts a quantitative comparative analysis, and selects key indicators for comparative analysis and summary from seven dimensions, including economic and social development, carbon emission pathways, primary energy consumption, final energy consumption, final hydrogen energy consumption, electricity demand and supply, and installed capacity and structure of power generation. Main conclusions are as follows: (i) In terms of carbon emission pathways, the institutions generally believed that China will peak carbon emissions around 2028 and achieve carbon neutrality between 2050 and 2060. Achieving net-zero or near-zero emissions first in the power sector is the key to carbon neutrality across the society; (ii) In terms of energy supply, it is a consensus to increase the proportion of clean energy and reduce carbon emissions from the source. The proportion of clean energy in primary energy will increase to more than 85%, and the proportion of clean energy power generation and installed capacity will reach more than 90%; (iii) In terms of energy use, electricity will become the core of final energy consumption in the future. The predicted electricity consumption across the society will range 14.3–18.4 PWh, and the predicted electrification rate will exceed 65%. [ABSTRACT FROM AUTHOR]

Based on the evidence from listed company microdata and data from 285 cities in China, this paper studies the coordinated development of two-way FDI (CDFDI) in improving green energy efficiency (GEE). In particular, this paper examines the spatial heterogeneity effects of CDFDI on GEE. The results showed that CDFDI had a positive impact on the GEE of local and surrounding cities. Mechanistic examinations show that the effects of CDFDI on GEE are mediated by technological diffusion, nationalization, and environmental regulation. After dividing different city types, the impact of CDFDI is also different. By constructing a spatial decay weight matrix, this paper also finds that the positive spatial spillover effect of CDFDI is limited to 1050 KM. Finally, different investment motive portfolios also has a heterogeneous impact on the local and surrounding cities' GEE. After dividing the time nodes, the effect of this heterogeneity is more prominent. • We use multiple undesired output indicators covering eight pollutants to measure green energy efficiency (GEE). • CDFDI has a significant boost to GEE in local and surrounding cities. • The impact of CDFDI on GEE is moderated by technological diffusion, nationalization, and environmental regulation. • The spatial spillover effects of CDFDI are heterogeneous by city category and geographic distance. • CDFDI with different investment motives has heterogeneous effects on local and surrounding cities' GEE. [ABSTRACT FROM AUTHOR]

Regional integrated energy systems (RIES) can economically and efficiently use regional renewable energy resources, of which energy storage is an important means to solve the uncertainty of renewable energy output, but traditional electrochemical energy storage is only single electrical energy storage, and the energy efficiency level is low. Hydrogen energy storage has the advantages of large energy storage capacity, long storage time, clean and pollution-free, and can realize the synergistic and efficient utilization of electricity and thermal power. Based on this, this paper proposes a synergistic planning method for an integrated energy system with hydrogen storage taking into account the coupled use of electric-thermal energy, which effectively reduces the system carbon emission and improves the comprehensive energy efficiency level. Firstly, this paper constructs an electric-thermal coupling model of the hydrogen energy storage unit and proposes an optimization strategy for the integrated energy system containing hydrogen storage taking into account the utilization of electricity and thermal power. Secondly, a planning optimization model with the lowest economy and carbon emission and the highest comprehensive energy efficiency was constructed. Third, the CSPO-GE optimization algorithm is proposed for solving the problem, which significantly improves the solution efficiency. Finally, a planning optimization simulation of RIES for a residential community W in northern China verifies the effectiveness of the model and method proposed in this paper. The comparative analysis of the three schemes shows that compared with the integrated energy system with conventional electrochemical energy storage and heat storage tank as the main form of energy storage and the integrated energy system with only hydrogen storage, the integrated energy system with hydrogen storage and heat storage tank can reduce carbon emissions by 43.8% and 7.61%, respectively, and improve the integrated energy efficiency level by 337.14% and 14.44%. • An electrothermal coupled production strategy based on dynamic equilibrium feedback regulation is proposed. • A hydrogen-containing RIES planning and optimization model considering economy-environment-efficiency is constructed. • A multi-objective chaotic particle swarm algorithm (CPSO-GE) based on greedy and elite retention strategies is proposed • The impact of cost variation of hydrogen storage devices on the economics of integrated energy systems is considered. [ABSTRACT FROM AUTHOR]

Currently, coal is still the main energy source for China's economic development, and the environmental issues caused by coal consumption have aroused widespread concern. Predicting and analyzing coal consumption will help to formulate a higher level of energy consumption planning and economic development strategy. The main purpose of this study is to develop a new fractal time-series prediction (FTSP) model to predict coal consumption, providing reference for formulating effective energy consumption planning and economic development strategies. Hurst index is an important indicator of whether time-series data have long memory and fractal characteristics. This paper uses the rescaled range (R/S) method to calculate Hurst index of the coal consumption per-10000-Yuan-GDP (CC/GDP). The Hurst index is 0.8025, exceeding 0.5, indicating that the time-series data CC/GDP has a long memory and fractal characteristic. Based on this, this paper uses the FTSP model to predict China's coal consumption (CC/GDP). The prediction results show that the FTSP model accurately predicted China's coal consumption with a relative error rate (RER) of less than 5% and a mean absolute percentage error (MAPE) of 6.62%. The model predicts a decrease in China's coal consumption from 0.25 tons of standard coal in 2021 to 0.11 tons of standard coal in 2030, a decrease of 44%. To sum up, the FTSP model provides a new and accurate way to predict coal consumption, and the results suggest that China's coal consumption is sustainable and will decrease significantly in the coming years. This study has important implications for energy consumption planning and economic development strategies. [ABSTRACT FROM AUTHOR]

Emissions trading schemes (ETS) area is a leading climate policy instrument worldwide and have been widely discussed and researched. However, few studies to date focus on the nexus of ETS and income inequality, an important socioeconomic phenomenon. To fill this gap, taking China as an example, this paper discusses the influence of ETS on income inequality and its dynamic changes using a time-varying differences-in-difference model combined with a propensity score matching approach. The results demonstrate that China's pilot ETS has contributed to reducing income inequality. Various robustness tests support this conclusion. Moreover, the strength of ETS's contribution to reduction in income inequality gradually increases over time. We further analyze the mediating effects of carbon intensity, energy consumption, industrial structure, and technological innovation. ETS reduces income inequality by reducing coal consumption. The regional heterogeneity analysis shows that, unlike in other regions, ETS has a positive impact on income inequality (i.e. it increases it) in the eastern region in China due to its optimized energy structure and relatively complete, open, and flexible economy system. The paper discusses the above findings and their policy implications. It is also designed to promote research on ETS and to diversify research perspectives of income inequality from both theoretical and practical aspects. Evidence from China's pilot experience with ETS shows that it contributes significantly to balancing income distribution and alleviating the increasingly acute social conflicts caused by income inequality. This provides new theoretical and decision support for the promotion of ETS in the future. The energy revolution driven by ETS promotes income redistribution, which is conducive to income equality. Governments should enforce the constraints of ETS on power generation companies; guide capital to invest more in the non-thermal power industry, especially the renewable energy power sectors; and guide and regulate the income distribution in new power sectors. Governments' revenue from ETS can and should be used to further redistribution of income and to reduce income inequality. A higher number of free quotas and a lower carbon price could be imposed on low-profit or labor-intensive industries to reduce their emission costs. [ABSTRACT FROM AUTHOR]

China has entered the stage of high-quality development, and the construction of new-type urbanization is an important approach for the realization of the country's high-quality economic development as well as reaching peak carbon emissions and achieving carbon neutrality. The existing literature has produced a number of fruitful research results on the economic and environmental effects of the transformation of urbanization. However, few studies have tested the effects of the new-type urbanization construction on energy efficiency and their mechanisms from the perspective of exogenous impact. Therefore, in the context of China's actual situation, this paper constructed a theoretical framework of 'technological progress－population agglomeration－urban expansion,' and then deeply explained how the comprehensive pilot policy for new-type urbanization affected energy efficiency. Based on the panel data of 285 cities in China, this paper made an innovative breakthrough from the existing empirical analyses by dividing energy efficiency into total-factor energy efficiency and green total-factor energy efficiency, choosing the comprehensive pilot policy for new-type urbanization as a quasinatural experiment, and using the difference-in-differences method to examine the mechanisms and impact of new-type urbanization on energy efficiency. The results showed that: ① After a series of robustness tests, the impact of the comprehensive pilot policy for newtype urbanization on total-factor energy efficiency and green total-factor energy efficiency was significantly negative, and the effect increased year by year. ② Mechanism analysis showed that new-type urbanization mainly hindered the improvement of energy efficiency by promoting technological progress, boosting population agglomeration, and stimulating urban expansion. ③ According to the analysis of the effect of the regional biased policy, the regionally biased policy leaning toward the central and western regions did not promote the energy-saving effect of new-type urbanization. ④ According to the analysis of the effect of urban agglomeration mode, joining an urban agglomeration helped enhance the effect of the new-type urbanization on energy efficiency. This study provides empirical evidence and policy implications for promoting China's new-type urbanization, avoiding unfavorable factors, and achieving a 'win-win' situation of the high-quality development of new-type urbanization and the improvement of energy efficiency. [ABSTRACT FROM AUTHOR]

• A simple, large-scale fabrication of cooling paper via pulping and papermaking technology. • The cooling paper is facilely deconstructed and regenerated to architect the secondary cooler. • The cooling paper features a high solar reflectance of 94% and emissivity of 0.95. • The cooling paper shows the sub-ambient temperature drop of 6 ∼ 8.8 °C under directly solar radiation at daytime. Passive radiative cooling materials provide coldness without energy consumption for all-day thermal comfort by reflecting solar irradiation and emitting heat into the 3 K universe. However, the conventional radiative cooling materials involve complex multilayer structures and unsustainable polymers, showing the non-recyclable disadvantage, which induces resource waste and environmental issues. Herein, we reported a low-cost, scalable, and eco-friendly radiative cooling material (namely cooling paper), consisting of the delignified, fibrillated cellulose fibers and nano-sized hydroxyapatite (HA) via the mature pulping and papermaking process. The resulting cooled paper can be recycled, and it can be easily deconstructed to harvest cellulose fibers and HA, individually. The recovered source materials can be reused to prepare secondary products that show comparable performance to the original cooling paper, including a high solar reflectance of ∼94% and an infrared emissivity of ∼0.95 in the atmospheric transparency window. Such cooling paper enables superior cooling performance with the temperature drop of 6 ∼ 8.8 °C under directly solar radiation. Based on the EnergyPlus simulation, our cooling paper shows a average cooling energy saving of ∼29 % in buildings across China. The recyclable cooling paper with high cooling capability and scalability, as well as environmental friendliness, shows promising potential for sustainable energy-efficient buildings. [ABSTRACT FROM AUTHOR]

In order to evaluate the effect of market-oriented environmental management measures on regional carbon emission intensity in the pilot areas better, this paper adopts a quasinatural experiment of energy-use rights trading (EURT) policy by using the difference-in-difference method from the perspective of cities in China from 2006 to 2019. The results show that the policy of EURT can significantly reduce regional carbon emission intensity, which varies in different regions and different scales of cities. The main goal of implementing the policy is to reduce regional carbon emission intensity by improving the energy consumption structure and promoting the improvement of industrial structure and green innovation. In addition, the spatial impact of the EURT pilot project is demonstrated by its ability to not only reduce local carbon emission intensity but also decrease carbon intensity in and around the designated areas. [ABSTRACT FROM AUTHOR]

In recent years, the escalating global concerns surrounding climate change have placed a growing emphasis on achieving dual objectives: reducing carbon emissions and achieving carbon neutrality. Businesses and organizations are under mounting pressure to align their operations with these crucial environmental goals. This paper introduces the concept of an enterprise carbon performance evaluation index system (ECPIS) to strike a balance between economic development and environmental protection and enhance overall enterprise management and development strategies. The ECPIS framework is constructed using machine learning and advanced data mining techniques, particularly support vector machines (SVM). Its core purpose is to provide enterprises with a systematic tool to gauge, analyze, and enhance their carbon performance, addressing dual carbon objectives. ECPIS development hinges on data mining techniques, extracting insights from diverse data sources to construct a comprehensive system that accommodates these dual carbon goals' intricacies. Its methodology includes data collection, preprocessing, feature selection, and data mining algorithms to unveil vital patterns and relationships within data. It conforms to international standards, establishing a tailored carbon performance index system aligned with China's national conditions. It validates carbon-related enterprise data and employs data mining's association rules to uncover pertinent carbon performance information. The results obtained from ECPIS are auspicious, boasting an experiential accuracy rate of 97.5%. This level of accuracy surpasses that achieved by other algorithms like K-Nearest Neighbors (KNN), Random Forest (RF), Decision Trees (DT), Naïve Bayes (NB), and Logistic Regression (LR). ECPIS stands out by considering various factors, including carbon emissions reduction, energy consumption, supply chain efficiency, and financial performance indicators. This multifaceted approach enables enterprises to gain a comprehensive understanding of their carbon performance and identify areas for improvement. [ABSTRACT FROM AUTHOR]

The report to the 20th National Congress of the Communist Party of China mentioned that China is facing tightening resource and environmental constraints, environmental pollution, and other issues, and the energy-consuming right trading policy is a key measure to promote green, circular, and low-carbon development in China. Under the dual consideration of ecological benefits and economic benefits, this paper took the pilot launch of energy-consuming trading as a quasi-natural experiment and used panel data from 31 provinces in China from 2009 to 2020 and the different-in-differences method to explore the impact of this policy on the optimization and upgrading of China's industrial structure. The study showed that: (J) The energy-consuming right trading policy could promote the optimization and upgrading of the industrial structure, and the promotion effect on the upgrading of the industrial structure outweighed its adverse impact on the rationalization of the industrial structure, as evidenced by a series of robustness tests. © The mechanism analysis showed that the realization paths of industrial structure upgrading were the upgrading of technological innovation and that of energy consumption structure, and the policy suppressed the adverse impact on the rationalization of industrial structure by improving the input structure and output structure of some industrial sectors. © In addition, the pilot policy of energy-consuming rights had obvious regional heterogeneity for the optimization and upgrading of industrial structure, which significantly promoted the upgrading of industrial structure in the central and western regions and the rationalization of industrial structure in the eastern regions. This study provides some policy references for the optimization and upgrading of industrial structure from the perspective of improving the energy-consuming right trading market. [ABSTRACT FROM AUTHOR]

With rapid industrialization, rising fossil fuel consumption, and environmental concerns, developing clean and green energy is an inescapable option. Hydrogen has emerged as a significant potential energy carrier and a viable future replacement fuel for fossil fuels due to its renewable and pollution-free properties. Previous review papers have significantly contributed to the body of literature on the various technologies for producing hydrogen by revealing key insights into their working principles and conditions, as well as the economic and environmental aspects. In addition, they also highlighted the potential pathways to enable the application of these technologies in the context of carbon neutrality. However, these studies have not broken down the evolutionary patterns and developmental progress of either fossil fuel-based or renewable energy-based technologies used to produce hydrogen. In addition, the currently available literature does not contain the most recent research that focuses on the evolution and life cycle of each technology category from a chronological point of view. The key drivers, countries/regions, and their contributions to the field's development have received little attention. As a result, it is critical to monitor technological advances in hydrogen energy production and investigate the key enablers of these advancements. Against this backdrop, the current study employs patent analysis tools to achieve four primary goals: (1) to track the development trends in the field of hydrogen production from 2000 to 2019; (2) to identify and compare the recent development trends in the last five years according to the feedstock, i.e., fossil fuel, water, and biomass-based technologies; (3) to predict the technology life cycle of the two main groups of hydrogen production technologies (fossil and renewable); (4) to identify and compare the key drivers of hydrogen production technologies from a statistical standpoint. The findings of the study may aid in identifying technical prospects in the field of fossil and renewable-based hydrogen production, and decision-makers may use them as a reference in developing a strategic plan for future technological growth. • Patent review on hydrogen production technologies from 2000 to 2019. • Japan, US, China are the leading countries in the field. • Recent developments are focused on renewable energy-based technologies especially water. • Technology maturity rate of renewable-based technologies is about 57%. • R&D expenditure strongly promotes hydrogen production innovations. [ABSTRACT FROM AUTHOR]

Dams have proliferated along the Mekong, spurred by energy demands from economic development and capital from private companies. Swift dam evolution has rendered many databases outdated, in which mismatches arise from differing compilation methods. Without a comprehensive database, up-to-date spatial assessment of dam growth is unavailable. Looking at future development, hydropower potential specifically within the Mekong remains to be systematically evaluated. In this paper, we offer (1) an open-access and unified database of 1,055 dams, (2) a spatiotemporal analysis of dams on a sub-basin and country level from the 1980s to the post-2020s, and (3) a grid-based assessment of the theoretical basin-wide hydropower potential, using present-day discharge from the CaMa-Flood model (2011-2015, 0.05 degree), and future discharge from the WaterGAP2 model used for ISIMIP2b (2021-2030, 0.5 degree). The dam count of 1,055 is more than twice the largest existing database, with 608 hydropower dams generating a boom in hydropower capacity from 1,242 MW in the 1980s to 69,199 MW post-2020s. While China had the largest capacity increase from the 2000s to the 2010s (+16,854 MW), Laos has the most planned dams and the highest projected growth post-2020s (+18,223 MW). Based on present-day discharge, we estimate a basin-wide hydropower potential of 1,334,683 MW, where Laos is the highest at 514,887 MW. Based on future discharge modeled with climate change, hydropower potential could grow to over 2,000,000 MW. Laos and China are the highest at around 900,000 MW each, together forming over 80% of the total potential. Our database facilitates research on dam-induced hydrological and ecological alterations, while spatiotemporal analysis of hydropower capacity could illuminate the complex transboundary electricity trade. Through both spatiotemporal and hydropower potential evaluation, we address the current and future vulnerability of countries to dam construction, highlighting the need for better planning and management in the future hydropower hotspot Laos. The Mekong dam database is publicly available at https://doi.org/10.21979/N9/ACZIJN (Ang et al., 2023). [ABSTRACT FROM AUTHOR]

Single-rate pipeline prices have resulted in low competitive flexibility and have led to high costs and consumption in China's refined oil logistics system. This study aims to propose a framework for multi-product pipelines supplementary pricing strategy that creates a win-win situation for both shippers and pipeline carriers while quantifying economic, energy and environmental performance. Based on the objective of cost minimization, a lower limit constraint on pipeline transportation quantity is added, and a discount coefficient is introduced for pipeline prices, thus improving the transportation optimization model. Moreover, this paper develops an implementation approach for a supplementary pricing strategy that can ensure that the discounted price is not lower than the sum of cost and minimum profit. This framework usability is confirmed using a Chinese oil company as an example. The results show that the optimal scheme can increase pipeline revenue by ¥79.8 million while reduce shipper's logistics costs by ¥1.68 million during the practice cycle. Meanwhile, this work reduces energy consumption by 1.37 tce, CO 2 emission by 444 tons, SO 2 emission by 5.65 tons, and NO X emission by 7.07 million tons for the logistics system. Compared with past studies, this study is more economical or more in line with market-oriented behavior. • A framework for 3E performance improvement of multi-product pipelines is proposed. • The improved transportation optimization model is used as a pricing tool. • A supplementary strategy implementation approach is defined. • Total economic benefit to shippers and pipeline carriers is ¥9.66 million. • The energy and environmental benefits of the logistics system are quantified. [ABSTRACT FROM AUTHOR]

Water and energy are not only the foundation of high‐quality development in rural areas but also important constraints. Exploring the inner relationship between water, energy, and economic development has important significance for the high‐quality development in rural areas. This paper first constructs the evaluation index system of high‐quality development in rural areas, and quantifies high‐quality development levels in rural China from 1997 to 2021. Second, from the perspective of water footprint, the Super‐slack based measure model is used to calculate sustainable development efficiency under the constraint of water and energy. Finally, kernel density function, Gini coefficient method, and Tobit model are used to explore the evolution trend, regional differences, and driving factors of sustainable development efficiency in rural China. The results show that: (1) Under the constraint of water and energy, sustainable development efficiency in rural China is relatively low, showing a fluctuating trend of first rising and then declining. The efficiency in the western and eastern regions is higher than the national average, while the central region is the lowest. (2) The evolution trend of sustainable development efficiency in rural China, both the eastern and the western regions, shows the characteristics of "decreasing efficiency and weak polarization phenomenon," while the central region shows the characteristics of "decreasing efficiency and no polarization phenomenon." (3) The regional differences illustrate a fluctuating upward trend, which is mainly caused by the hypervariable density, followed by the differences among provinces in the eastern region. (4) Economic development, opening up, and rural marketization are the main factors. [ABSTRACT FROM AUTHOR]