Search

The article offers information on several articles on thermal stresses used in the 2012 issue of "Journal of Thermal Stresses" such as "Thermal stresses in an infinite circular cylinder," "Size and Distribution of Welding Stresses" and "An Inverse Thermoelastic Problem of Circular Plate."

The article lists several periodicals about thermal stresses including "Journal of Mechanical Science and Technology," "International Journal for Numerical Methods in Engineering," and "Special Casting and Nonferrous Alloys."

The article presents a list of publications on thermal stresses including "Linear Thermoelastic Buckling and Free Vibration Behavior of Functionally Graded Truncated Conical Shells," by R. K. Bhangale, N. Ganesan and C. Padmanabhan, "Several Results in the Dynamic Theory of Thermoelastic Cosserat Shells With Voids," by M. Birsan and "Modelling Elastic and Thermoelastic thick Multilayered Composites by a New Constrained Discrete Layer Approach," by M. Blanc and M. Touratier.

The article presents a list of recently published articles about thermal stresses including "Possibility of Enhanced Strength and Self-Recovery of Surface Damages of Ceramics Composites Under Oxidative Conditions," by O. Abe, Y. Ohwa, and Y. I. Kuranobu, "Modelling Elastic and Thermoelastic Thick Multilayered Composites by a New Constrained Discrete Layer Approach," by M. Blanc and M. Touratier, and "An Experimental Study on Creep of Welded Tuff," by L. Ma and J. J. K. Daemen.

A list of research papers on thermal stresses is presented including "The Effects of Surface Pretreatment on the Cyclic-Fatigue Characteristics of Bonded Aluminium-Alloy Joints," by M.L. Abel and colleagues, "A Linear Finite Element Model to Predict Processing-Induced Distortion in FRP Laminates," by S.K. Bapanapalli and colleagues, "Shear Bands Due to Heat Flux Prescribed at Boundaries," by R.C. Batra and colleagues.

The article presents a list of articles related to thermal stresses including "Axisymmetric Task of the Thermolastic Wave Excitation in a Thin Plate by Pulse Relativistic Electron Beam," by Y. W. Bao, X. H. Wang and H. B. Zhang, "Thermoelastic Solution for Stresses," by N. M. Borodachev, and "Influence of Coagulant Temperature and On-Line Drawing on the Mechanical Properties and Permeation Performance of Cellulose Acetate Hollow Fiber," by W. L. Chou, D. G. Yu and M. C. Yang.

Lists several publications on thermal stresses. "A Two-Dimensional Heat Transfer Model for Thermal Barrier Coating Average Thermal Conductivity Computation," published in the "Numerical Heat Transfer; Part A: Applications" journal; "Stress Analysis of Curvilinearly Orthotropic Rotating Discs under Mechanical and Thermal Loading," published in the "Journal of Reinforced Plastics and Composites"; "Stability of Thermoelastic Contact for a Rectangular Elastic Block Sliding Against a Rigid Wall," published in the "European Journal of Mechanics, A/Solids."

Presents several articles on thermal stresses. "A Consistent Modified Zerilli-Armstrong Flow Stress Model for BCC and FCC Metals for Elevated Temperatures," by F. H. Abed and G. Z. Voyiadjis; "Thermal Effect on Gravity Waves in a Compressible Liquid Layer Over a Solid Half-Space Under Initial Hydrostatic Stress," by S. K. Addy and N. R. Chakraborty; "Electromagneto-Thermoelastic Fundamental Solutions in a Two-Dimensional Problem for Short Time," by M. Aouadi.

Lists several publications on thermal stresses.

Emanating from the Boltzmann transport equation, a new C- and F-processes heat conduction constitutive model is derived. The model acknowledges the notion of the simultaneous coexistence of both the slow Cattaneo-type C-processes and fast Fourier-type F-processes in the mechanisms of heat conduction. The C- and F-processes heat conduction constitutive model and the corresponding temperature equation that results from coupling the constitutive model with the energy equation naturally lead to a generalization of the macroscale in space one-temperature theory for heat conduction in solids of the Jeffreys'-type model, Cattaneo model, and the Fourier model for heat conduction in solids. This is unlike the Jeffreys'-type phenomenological model, which cannot reduce to the classical Fourier model (but only to a Fourier-like representation with relaxation) and it cannot explain the underlying physics associated with the C- and F-processes model. Additionally, the microscale in space two-temperature theory for pulse heating of metals is also highlighted via the C- and F-processes heat conduction constitutive model. Emphasis is placed on the development of a new C- and F-processes heat conduction model based on generalized thermoelastic theory to study the dynamic thermoelastic behavior of solids with special features that can lead to and explain the classical and nonclassical dynamic thermoelastic theories. Finally some conceptual pitfalls that appear in the literature are addressed. [ABSTRACT FROM AUTHOR]

The sources cited within this issue are presented including "The Thermodynamically Consistent Equations of a Thermoelastic Saturated Porous Medium," by V. I. Kondaurov, "Impossibility of Localization in Linear Thermoelasticity with Voids," by R. Quintanilla, and "Geometric Effects on Thermoelastic Damping in MEMS Resonators," by Y. B. Yi.

A list of publications on thermal stresses which includes "Thermal Stresses and Related Phenomena in Composite Ceramics," by L. Ceniga, "Thermal Stresses and Effective Properties Calculated for Fiber Composites Using Actual Cylindrically-Anisotropic Properties of Interfacial Carbon Coating," by K. Honjo, and "Influence of Inhomogeneous Interphase on Thermal Stresses in Fiber-Reinforced Composites," by L. H. You.

A list of publications related to thermal stresses that already appeared in various sources is presented. They include "Subsurface Deformation and Damage Accumulation in Aluminum-Silicon Alloys Subjected to Sliding Contact," by S. S. Akarca, W. J. Altenhof, and A. T. Alpas, "Thermoelastic Stability of Bimetallic Shallow Shells of Revolution," by M. Batista and F. Kosel and "FEM Simulations of Microstructure Effects on Thermoelastic Properties of Sintered Ceramics," by M. Iuga and F. Raether.

A list of articles related to thermal stresses that were published in several journals is presented including "Transient Temperature and Elastic Response of a Space-Based Mirror in the Radiation-Conduction Environment," by B. K. Choudhury, "Thermodynamic Aspects of Subsurface Phenomena in Thermoelastic Systems," by Y. I. Burak and E. Y. Chaplya and "Theory of Two-Temperature-Generalized Thermoelasticity," by H. M. Youssef.

The article presents various publications of the articles related to thermal stresses, including "Finite Element Simulation of Fracture Behaviour for Aged Duplex Stainless Steels," by J. M. Alegre and F. Gutierrez-Solana, "Thermal Effects in Partially Saturated Soils: A Constitutive Model," by G. Bolzon and B. A. Schrefler, "Effective Thermoelastic Moduli and Stress Concentrator Factors in Nanocomposites," by V. A. Buryachenko and A. Roy, "The Effect of Restraint on Weld Solidification Cracking in Aluminium," by C. E. Cross and T. Bollinghaus, and "Mechanism of Effects of Temperature and Effective Stress on Permeability of Sandstone," by Y. L. He and L. Z. Yang.

The article presents a compilation of published articles on thermal stresses including "Separated Steady State Solutions for Two Thermoelastic Half-Planes in Contact With Out-of-Plane Sliding," by L. Afferrante and M. Ciavarella, "A Linear Thermoelastic Buckling Behavior of Functionally Graded Hemispherical Shell with a Cut-Out at Apex in Thermal Environment," by R. K. Bhangale and N. Ganesan and "Thermal Relaxation Effects in Rapid Sliding Contact with Friction," by L. M. Brock.

Presents various publications on thermal stresses. "Femtosecond Versus Nanosecond Laser Machining: Comparison of Induced Stresses and Structural Changes in Silicon Wafers," M. . Amer and colleagues; "A Parametric Study of the Stress State of Thermal Barrier Coatings," by M. Baker; "A Remark on Cauchy-Elasticity," by J. Casey.

Presents a list of publications on thermal stresses as of August 2005.

The article presents a list of publications on thermal stresses that have appeared elsewhere including "Thermoelastic Problems in Isotropic and Composite Plates," by V. Birman.

The article presents a list of publications on thermal stresses including "Thermoelastic Solution for Static Deformations of Functionally Graded Cylindrical Shell Bonded to Thin Piezoelectric Layers" by A. Alibeigloo, "A Contact Problem in Generalized Thermoelasticity" by M.I.M. Copetti, and "Thermomechanical Transient Analysis and Conceptual Optimization of a First Stage Bucket" by J. Turbomach.

The article presents a list of publications on thermal stresses including "An Analytical Method for Magnetothermoelastic Analysis of Functionally Graded Hollow Cylinders."

The article presents a list of topics on thermal stresses that are published in other journals including "Thermal Stresses in Bodies with Random Initial Temperature Distribution," by R. Chiba and Y. Sugano, "Effect of Thermal Stresses on Pavement Performance Under Mild Climate Conditions," by J. Kim and R. C. West and "Essay on Thermal Stresses," by N. Noda.

A bibliography on the subject of thermal stresses is presented which includes the publications "Thermoelastic Problem of Friction of Plane-Parallel Layers with Allowance for Nonstationarity of Thermal Processes," by A. P. Nosko and N. S. Belyakov, "Thermal Stresses and Birefringence in Quenched Tubes and Rods: Simulation and Experiment," by A. I. Isayev and A. J. Carrillo, and "Thermal Stress Analysis of a Bi-Material Layered Structure," by S. W. Yeh, C. H. Lin, and S. C. Her.

A bibliography on the subject of thermal stresses is presented which includes the article "On the Solutions of a Boundary Value Problem of Linear Thermoelasticity System with Nonlocal Conditions," by L. Bougoffa, H. K. AlJeaid, and A. Khanfer, "Response of Frequency Domain in Generalized Thermoelasticity with Two Temperatures," by S. Kaushal, R. Kumar, and A. Miglani, and "Thermal Stress Analysis of BOF Accounting for Friction Force Experimentally Measured," by Y. Hino, Y. Kiyota, and Y. Hattori.

A bibliography on the subject of thermal stresses is presented which includes the articles "Propagation of P Waves from Stress-Free Surface Elastic Half-Space with Voids Under Thermal Relaxation and Magnetic Field," by S. M. Abo-Dahab, "Analytical Model of Thermal Stresses in Two- and "Three-Component Materials," by L. Ceniga, and "Thermoelastic Stress Analysis of Damage Mechanisms in Composite Materials," by T. R. Emery and J. M. Dulieu-Barton.

A list of publications on thermal stresses that have appeared in other journals are presented including "Development of a Finite Element for Thermo-Elastic Analysis of Composite Plates Using Zigzag Theory," published in a previous issue of "Journal of the Institution of Engineers," "Stress and Damage Analysis Using Transient Loading," published in a previous issue of the journal "Experimental Mechanics," and "A Partition of Energy in Thermoelasticity of Microstretch Bodies."

A bibliography on the subject of thermal stresses is presented which includes the publications "Finite Element Analysis of Thermoelastic Field in a Rotating FGM Circular Disk," by A. M. Afsar and J. Go; "Micromechanics of Fibrous Composites Subjected to Combined Shear and Thermal Loading Using a Truly Meshless Method," by I. Ahmadi and M. M. Aghdam; and, "Three-Dimensional Thermal Shock Problem of Generalized Thermoelastic Half-Space," by M. A. Ezzat and H. M. Youssef.

The article lists publications on thermal stresses that have appeared in different journals.

The article lists the publications on thermal stresses including "Frictionally Excited Thermo-Elastoplastic Instability," by S. H. Ahn and Y. H. Jang, "Vibrational Thermodynamics of Materials," by B. Fultz and "Vibration Analysis of Horizontal Self-Weighted Beams and Cables with Bending Stiffness Subjected to Thermal Loads," by F. Treyssede.

The article lists publications on thermal stresses which include "Circumferential Waves in Micropolar Thermoelastic Cylindrical Curved Plate," by R. Kumar and G. Partap, "Thermal Stress and Thermal Fatigue Analysis of the Continuous Casting Tundish Cover," by X. Zhou, Z. F. Tang, and G. H. Qu and "Thermoelasticity Analysis of Functionally Graded Beam with Integrated Surface Piezoelectric Layers," by A. Alibeigloo.

The article lists the articles on thermal stress including one stress relaxation and constitutive modeling of viscoelastic behavior of natural rubber, published in the journal "Materials and Design," another on the analysis of residual stress in glass-to-metal seals by D. Q. Lei, and colleagues in "Materials and Design," and another on three-dimensional free vibration of thick functionally graded annular plates.

A list of publications related to thermal stresses including "Extensional Thermoelastic Waves in Transversely Isotropic Plate According to a Higher Order Theory," by M. Al-Qahtani, "Effect of Thermomechanical Loads on the Propagation of Crack Near the Interface," by M. Boutabout and colleagues, and "Mechanical Modeling of Flexible OLED Devices," by C.J. Chiang, is presented.

The article lists the publications on thermal stresses which include "Materials Science and Engineering," by D. Mari and R. Schaller, "On the Traveling Wave Solutions for a Parabolic-Hyperbolic System in Linear Thermoelasticity, Applied Mathematics and Computation," by L. Bougoffa and "Thermomechanical Modeling of Beam Blank Casting, Iron and Steel Technology," by B. G. Thomas and S. Koric.

The article presents a list of publications related to thermal stresses, including "Optimization of Temperature-Dependent Functionally Graded Material Bodies," by D. Boussaa, "Effect of Rotation in Magneto-Micropolar Thermoelastic Medium Due to Mechanical and Thermal Sources," by R.R. Kumar, and "Thermo- Mechanical Characterization of Forged Coated Products During Water Quench," by P. Ulysse.

The article lists the compilation of publications related to thermal stresses which includes "Analysis of Thermal Stresses in Magnetron Sputtered TiN Coating by Finite Element Method," "Numerical Investigation on the Laser Bending of Stainless Steel Foil with Pre-Stresses," and "An Analytical Model to Predict Residual Thermal Stress in 2D Orthogonal Plain Weave Fabric Composites."

The sources cited within this issue are presented including "Thermal Stress Developed During the Laser Cutting Process: Consideration of Different Materials," by A. F. M. Arif and colleagues, "Thermo-Elastic Behaviour of a Natural Quartzite: Itacolumite," by A. Docieux and colleagues and "The Extended Finite Element Method in Thermoelastic Fracture Mechanics," by M. Duflot.

A list of publications on thermal stresses is presented, including "Boundary Element Analysis of Three-Dimensional Mixed-Mode Thermoelastic Crack Problems Using the Interaction and Energy Domain Integrals," by R. Balderrama, A. P. Cisilino, and M. Martinez, "Effect of Anistropy on Thermoelastic Contact Problem," by S. P. Barki, M. Kanoria, and P. K. Chaudhuri, and "Variational Statements and Computational Models for Multifield Problems and Multilayered Structures, by E. Carrera, S. Brischetto, and P. Nali.

The article lists the publications on thermal stresses including "Distortions Induced in Turbine Blades by Hot Forging and Cooling," by S. Bruschi and A. Ghiotti, "Thermo-Electro-Structural Coupled Analyses of Crack Arrest by Joule Heating," by T. J. C. Liu, "A Refined State Space Formalism for Piezothermoelasticity," J. Q. Tarn and H. H. Chang.

The article lists the publications on thermal stresses that have appeared in other journals. They include "Magneto-Thermo-Elastic Problem of a Rotating Nonhomogeneous Anisotropic Solid Cylinder," by A.M. Abd-Alla and colleagues, "Rate-Dependent Thermo-Mechanical Modelling of Superelastic Shape-Memory Alloys for Seismic Applications," by F. Auricchio and colleagues, and "The Thermoelastic Behavior of Thrust Washer Bearings Considering Mixed Lubrication," by R. L. Jackson and I. Green.

The article lists articles on thermal stresses published as of September 2008 including "Thermal Stress Development in Fibrous Composites," by G. Anagnostopoulos, J. Parthenios and C. Galiotis, "On the Use of Temperature-Dependent Physical Properties in Thermomechanical Calculations for Solid and Hollow Cylinders," by H. Argeso and A.N. Eraslan and "On the Structural Stability of Thermoelastic Model of Porous Media," by S. Chirita and M. Ciarletta.

The article lists publications on thermal stresses which includes "Materials Science and Technology," by A. Akdogan and A. Koyun, "Composite Structures," by P. R. Babu and P. Pradhan, and "International Journal of Solids and Structure," by S. H. Mallik and M. Kanoria.

The article lists the publications on thermal stresses including "Thermal Stresses in Butt-Jointed Thick Plates from Different Materials," by D. Guney, "Thermoelastic Stresses in Inhomogeneous Anisotropic Solid in the Presence of Body Force," by M. A. Fahmy, and "Three-Dimensional Thermoelastic Stresses in Off-Axis Oriented Single Crystals with Hexagonal Symmetry," by K. A. Cliffe.

The article lists publications that have appeared in the journal including one by H. Matsunaga and another by Y. Ootao and Y. Tanigawa.

The article lists the journal's publications related to thermal stresses including "Endochronic Model for Coupled Thermal-Mechanical Problems and Application to Upsetting Analysis," by J. P. Huang and X. H. Peng, "Characterization of Yielding of Sheet Metal at Elevated Temperatures," by W. Hussnatter, M. Merklein, and M. Geiger," and "Deformation Behavior of MEMS Gyroscope Sensor Package Subjected to Temperature Change," by J. W. Joo and S. H. Choa.

The article lists several publications related to thermal stresses including "Effect of Generalized Thermoelasticity Materials With Memory," by A. Baksi, B. K. Roy, and R. K. Bera, "Frictionally-Excited Thermoelastic Instability in Functionally Graded Material," by Y. H. Jang, and S. H. Ahn, and "The Symmetry Principle in Continuum Mechanics," by N. G. Khomasuridze.

The article lists several publications on thermal stresses which includes "Thermo-Elastic Dynamic Instability (TEDI) in Frictional Sliding of Two Elastic Half-Spaces," by L. Afferrante and M. Ciavarella, "The Characteristics of Forged Tantalum and Dynamic Constitutive Modeling," by W. G. Guo, and "Wave Propagation in a Generalized Thermoelastic Solid Cylinder of Arbitrary Cross-Section," by P. Ponnusamy.

A list of articles related to abortion that were published in several journals is presented including "Three-Dimensional Nonlinear Finite-Element Analysis of Gasketed Flange Joint under Combined Internal Pressure and Variable Temperatures, " by M. Abid and B. Ullah and "Analytical Modelling of Residual Stresses in Machining," by D. Ulutan, B. E. Alaca, and I. Lazoglu.

The article presents a list of publications on thermal stresses. These include "Steady-State Thermoelastic Behavior of a Two-Anisotropic Layer Thick Plate Strip," by N. S. Al-Huniti and M. A. Al-Nimr, "Coupled Thermoelasticity of Functionally Graded Cylindrical Shells," by A. Bahtui and M. R. Eslami, and "Analytical Prediction of Composite Beams Response in Fire Situations," by A. Benedetti and E. Mangoni.

The article presents a list of publication on thermal stresses. Included are "Steady-State Thermoelastic Behavior of a Two-Anisotropic Layer Thick Plate Strip," by N. S. Al-Huniti and M. A. Al-Nimr, "Coupled Thermoelasticity of Functionally Graded Cylindrical Shells," by A. Bahtui and M. R. Eslami, and "Thermoelastic Studies on Nitinol Stents," by J. Eaton-Evans, J. M. Dulieu-Barton, E. G. Little, and I. A. Brown.

This article presents a list of publications on thermal stresses. The list includes "Thermal Residual Stresses in an Adhesively Bonded Functionally Graded Tubular Single Lap Joint," by M. K. Apalak, R. Gunes, and S. Eroglu, "A Thermoelastic Contact Problem with a Phase Transition," by D. Homberg and A. Khludnev, and "Sharp Decay Rates in Parabolic and Hyperbolic Thermoelasticity," by T. Irmscher and R. Racke.