Search

The article presents a list of publications on thermal stresses including "Linear Thermoelastic Buckling and Free Vibration Behavior of Functionally Graded Truncated Conical Shells," by R. K. Bhangale, N. Ganesan and C. Padmanabhan, "Several Results in the Dynamic Theory of Thermoelastic Cosserat Shells With Voids," by M. Birsan and "Modelling Elastic and Thermoelastic thick Multilayered Composites by a New Constrained Discrete Layer Approach," by M. Blanc and M. Touratier.

The article presents a list of recently published articles about thermal stresses including "Possibility of Enhanced Strength and Self-Recovery of Surface Damages of Ceramics Composites Under Oxidative Conditions," by O. Abe, Y. Ohwa, and Y. I. Kuranobu, "Modelling Elastic and Thermoelastic Thick Multilayered Composites by a New Constrained Discrete Layer Approach," by M. Blanc and M. Touratier, and "An Experimental Study on Creep of Welded Tuff," by L. Ma and J. J. K. Daemen.

The article presents a list of articles related to thermal stresses including "Axisymmetric Task of the Thermolastic Wave Excitation in a Thin Plate by Pulse Relativistic Electron Beam," by Y. W. Bao, X. H. Wang and H. B. Zhang, "Thermoelastic Solution for Stresses," by N. M. Borodachev, and "Influence of Coagulant Temperature and On-Line Drawing on the Mechanical Properties and Permeation Performance of Cellulose Acetate Hollow Fiber," by W. L. Chou, D. G. Yu and M. C. Yang.

Lists several publications on thermal stresses. "A Two-Dimensional Heat Transfer Model for Thermal Barrier Coating Average Thermal Conductivity Computation," published in the "Numerical Heat Transfer; Part A: Applications" journal; "Stress Analysis of Curvilinearly Orthotropic Rotating Discs under Mechanical and Thermal Loading," published in the "Journal of Reinforced Plastics and Composites"; "Stability of Thermoelastic Contact for a Rectangular Elastic Block Sliding Against a Rigid Wall," published in the "European Journal of Mechanics, A/Solids."

Presents several articles on thermal stresses. "A Consistent Modified Zerilli-Armstrong Flow Stress Model for BCC and FCC Metals for Elevated Temperatures," by F. H. Abed and G. Z. Voyiadjis; "Thermal Effect on Gravity Waves in a Compressible Liquid Layer Over a Solid Half-Space Under Initial Hydrostatic Stress," by S. K. Addy and N. R. Chakraborty; "Electromagneto-Thermoelastic Fundamental Solutions in a Two-Dimensional Problem for Short Time," by M. Aouadi.

A list of publications on thermal stresses which includes "Thermal Stresses and Related Phenomena in Composite Ceramics," by L. Ceniga, "Thermal Stresses and Effective Properties Calculated for Fiber Composites Using Actual Cylindrically-Anisotropic Properties of Interfacial Carbon Coating," by K. Honjo, and "Influence of Inhomogeneous Interphase on Thermal Stresses in Fiber-Reinforced Composites," by L. H. You.

A list of publications related to thermal stresses that already appeared in various sources is presented. They include "Subsurface Deformation and Damage Accumulation in Aluminum-Silicon Alloys Subjected to Sliding Contact," by S. S. Akarca, W. J. Altenhof, and A. T. Alpas, "Thermoelastic Stability of Bimetallic Shallow Shells of Revolution," by M. Batista and F. Kosel and "FEM Simulations of Microstructure Effects on Thermoelastic Properties of Sintered Ceramics," by M. Iuga and F. Raether.

The article presents various publications of the articles related to thermal stresses, including "Finite Element Simulation of Fracture Behaviour for Aged Duplex Stainless Steels," by J. M. Alegre and F. Gutierrez-Solana, "Thermal Effects in Partially Saturated Soils: A Constitutive Model," by G. Bolzon and B. A. Schrefler, "Effective Thermoelastic Moduli and Stress Concentrator Factors in Nanocomposites," by V. A. Buryachenko and A. Roy, "The Effect of Restraint on Weld Solidification Cracking in Aluminium," by C. E. Cross and T. Bollinghaus, and "Mechanism of Effects of Temperature and Effective Stress on Permeability of Sandstone," by Y. L. He and L. Z. Yang.

The article presents a compilation of published articles on thermal stresses including "Separated Steady State Solutions for Two Thermoelastic Half-Planes in Contact With Out-of-Plane Sliding," by L. Afferrante and M. Ciavarella, "A Linear Thermoelastic Buckling Behavior of Functionally Graded Hemispherical Shell with a Cut-Out at Apex in Thermal Environment," by R. K. Bhangale and N. Ganesan and "Thermal Relaxation Effects in Rapid Sliding Contact with Friction," by L. M. Brock.

The article lists the publications on thermal stresses including "Distortions Induced in Turbine Blades by Hot Forging and Cooling," by S. Bruschi and A. Ghiotti, "Thermo-Electro-Structural Coupled Analyses of Crack Arrest by Joule Heating," by T. J. C. Liu, "A Refined State Space Formalism for Piezothermoelasticity," J. Q. Tarn and H. H. Chang.

The article lists the publications on thermal stresses that have appeared in other journals. They include "Magneto-Thermo-Elastic Problem of a Rotating Nonhomogeneous Anisotropic Solid Cylinder," by A.M. Abd-Alla and colleagues, "Rate-Dependent Thermo-Mechanical Modelling of Superelastic Shape-Memory Alloys for Seismic Applications," by F. Auricchio and colleagues, and "The Thermoelastic Behavior of Thrust Washer Bearings Considering Mixed Lubrication," by R. L. Jackson and I. Green.

The article lists the publications on thermal stresses which includes "Thermal Stress Analysis of Curvilinearly Orthotropic Rotating Discs", "Multiscale Modeling of the Thermoelastic Behavior of Braided Fabric Composites for Cryogenic Structures", and "Thermo Elastic Analysis of a Functionally Graded Rotating Disk with Small and Large Deflections".

The article presents a list of publications on thermal stresses. These include "Steady-State Thermoelastic Behavior of a Two-Anisotropic Layer Thick Plate Strip," by N. S. Al-Huniti and M. A. Al-Nimr, "Coupled Thermoelasticity of Functionally Graded Cylindrical Shells," by A. Bahtui and M. R. Eslami, and "Analytical Prediction of Composite Beams Response in Fire Situations," by A. Benedetti and E. Mangoni.

The article presents a list of publication on thermal stresses. Included are "Steady-State Thermoelastic Behavior of a Two-Anisotropic Layer Thick Plate Strip," by N. S. Al-Huniti and M. A. Al-Nimr, "Coupled Thermoelasticity of Functionally Graded Cylindrical Shells," by A. Bahtui and M. R. Eslami, and "Thermoelastic Studies on Nitinol Stents," by J. Eaton-Evans, J. M. Dulieu-Barton, E. G. Little, and I. A. Brown.

This article presents a list of publications on thermal stresses. The list includes "Thermal Residual Stresses in an Adhesively Bonded Functionally Graded Tubular Single Lap Joint," by M. K. Apalak, R. Gunes, and S. Eroglu, "A Thermoelastic Contact Problem with a Phase Transition," by D. Homberg and A. Khludnev, and "Sharp Decay Rates in Parabolic and Hyperbolic Thermoelasticity," by T. Irmscher and R. Racke.

A list of publications related to thermal stresses is presented including "Xiyou Jinshu Cailiao Yu Gongcheng: Rare Metal Materials and Engineering," vol. 25, no. 6, "Kuei Suan Jen Hsueh Pao: Journal of the Chinese Ceramic Society," vol. 34, and "International Journal for Numerical Methods in Engineering," vol. 67, no. 3.

The article presents a list of publications related to thermal stresses. They include "On the Generalized Plane Strain Problem in Thermoelasticity," by I. Babuska and B. Szabo, "Axial Symmetric Stationary Thermoelastic Analysis by Triple-Reciprocity BEM," by Y. Ochiai, V. Sladek and J. Sladek, and "Thermoelastic Bending of a Sandwich Plate on a Deformable Foundation," by A. V. Yaravaya.

The article presents a list of publications related to thermal stresses. They include "On the Generalized Plain Strain Problem in Thermoelasticity," "Thermal Stress Analysis of High-Speed Locomotive Braking Discs" and "The Effect of Rotation on the Reflection of Magneto-Thermoelastic Waves under Thermoelasticty Without Energy Dissipation."

A list of publications on thermal stresses are presented. It includes "Transformation Plasticity at Different Phase Transformations of Bearing Steel," by M. Dalgic and G. Lowisch, "Dynamic Analysis of Structures with Piezoelectric Actuators Based on Thermal Analogy Method," by X.J. Dong and G. Meng and "Thermal Shock Problem for one Dimensional Generalized Thermoelastic Layered Composite Material," by A.A. El-Bary and H.M. Youssef.

A list of publications related to thermal stresses is presented. It include "A Note on Thermoelastodynamic Instability (TEDI) for a 1D Elastic Layer: Force Control," by L. Afferrante and M. Ciavarella, "Numerical Tests of Thermal Cracking Induced by Temperature Gradient in Cement-Based Composites under Thermal Loads," by Y. F. Fu and colleagues and "Thermomechanical Fatigue Damage Evolution in SAC Solder Joints," by M. A. Matin and colleagues.