Search

This article considers the decentralized fractional-order fault-tolerant control problem for unmanned aerial vehicles (UAVs) against wind disturbances and actuator faults in a directed communication network. A new composite adaptive disturbance observer-based decentralized fractional-order fault-tolerant control (CADOB-DFO-FTC) scheme, which incorporates fractional-order (FO) sliding-mode surfaces, nonlinear disturbance observers (NDOs), fuzzy wavelet neural networks (FWNNs), and robust controllers, is developed to achieve the attitude tracking control of networked UAVs in a decentralized way. Based on the FO sliding-mode surfaces, the NDOs are first developed to estimate the lumped uncertainties due to the aerodynamic parameter perturbations, wind disturbances, and actuator faults. Then, adaptive FWNNs with updating weighting matrices, mean vectors, and deviation vectors are constructed to effectively attenuate the adverse effects induced by the NDO estimation errors. Furthermore, to compensate the FWNN approximation errors, robust controllers are integrated into the developed control scheme to enhance the approximation abilities. It is shown that by using Lyapunov methods, all UAVs can track their attitude references. Finally, comparative simulation results are presented to demonstrate the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This article presents a fixed-time accommodation strategy of actuator faults for hypersonic gliding vehicles (HGVs). The approach against actuator faults is incorporated by sliding mode control (SMC), bilimit homogeneity, and adaptive techniques, with consideration of practical constraints and model uncertainties. The resulting fault-tolerant attitude control law allows the fault compensation to be completed in a fixed time, in view of the limited time available for recovery of a faulty HGV. The effectiveness of the presented scheme is validated by comparing it to the finite-time fault accommodation scheme. Note to Practitioners—Hypersonic vehicles have drawn significant interests due to the features of super-fast and flexible maneuverability. The use of advanced fault-tolerant control (FTC) techniques is expected to guarantee safety during hypersonic vehicle operation. A challenging problem is how to counteract actuator faults promptly and effectively in the presence of practical constraints and model uncertainties. This article presents a fixed-time FTC algorithm for a hypersonic gliding vehicle. [ABSTRACT FROM AUTHOR]

In this paper, a quasi-optimal higher order sliding mode control (HOSMC) scheme is designed using disturbance observer (DOB) and adaptive techniques. The overall HOSMC scheme is constituted by three portions: 1) a switch-based quasi-optimal control law that ensures rapid finite-time stabilization of the origin, producing a nominally uncertainty-free system, based on a perturbed chain of integrators; 2) a DOB which estimates the lumped uncertainties with lower frequencies; and 3) an adaptive controller designed to deal with the fast-varying terms of these lumped uncertainties over the pass-band of the DOB. Since the adaptive controller and the DOB work in a cooperative manner, the only requirement is that the switching gain be greater than the bound of the DOB estimation error, instead of the bound of the lumped uncertainties. As a consequence, overestimation in the adaptive controller can be avoided by resorting to the equivalent control. Simulation results confirm the capabilities of the proposed control strategy. [ABSTRACT FROM AUTHOR]

This paper proposes a fault-tolerant control (FTC) scheme for a hypersonic gliding vehicle to counteract actuator faults and model uncertainties. Starting from the kinematic and aerodynamic models of the hypersonic vehicle, the control-oriented model subject to actuator faults is built. The observers are designed to estimate the information of actuator faults and model uncertainties, and to guarantee the estimation errors for converging to zero in fixed settling time. Subsequently, the finite-time multivariable terminal sliding mode control and composite-loop design are pursued to enable integration into the FTC, which can ensure the safety of the postfault vehicle in a timely manner. Simulation studies of a six degree-of-freedom nonlinear model of the hypersonic gliding vehicle are carried out to manifest the effectiveness of the investigated FTC system. [ABSTRACT FROM PUBLISHER]

Focusing on a quadrotor unmanned aerial vehicle (UAV), the presence of unintended actuator faults and external disturbances increases the risk of a crash. Although plenty of efforts have been devoted, how to integrate capability analysis into safety control design is still an open issue. This article presents the design of a safety control system for quadrotor UAVs. Firstly, a system capability analysis method based on a differential flatness algorithm is developed, so that the derivatives (i.e., velocity, jerk, and snap) of flight trajectory can be formulated as flat variables. A tradeoff between system capability and permissible flight maneuverability is made to avoid actuator saturation. Secondly, dual-loop nonlinear disturbance observers are exploited to identify the actuator faults and disturbances, which can thereby be handled by a cascade control scheme. Moreover, the trajectory is regenerated online at the expense of degraded flight maneuverability or even emergency landing, in view of the remaining actuator control authority. When comparing to the existing methods, the gap among safety control, trajectory generation, and system capability analysis is bridged to ameliorate practical flight safety. Finally, flight tests are carried out to demonstrate the unique merits of the proposed system. [ABSTRACT FROM AUTHOR]

This article focuses on the 3-D guidance strategy for a reusable launch vehicle (RLV) during terminal area energy management (TAEM) phase. Based on sliding-mode and shrinking-horizon techniques, the proposed scheme consists of trajectory generation and correction mechanisms, which can enhance the guidance precision and robustness against disturbances. The RLV guidance model, in the form of a set of highly nonlinear differential equations in the time domain, is recast as an altitude-domain model. By this means, the main characteristics of TAEM gliding motion are extracted. The altitude-domain model is thereby used for trajectory generation. A sliding surface and a guidance law are proposed. Hybrid TAEM constraints can be fully satisfied when the proposed guidance law drives the altitude-domain vehicle model to the designated altitude. Using the proposed guidance law as the input of the altitude-domain model, a constrained TAEM trajectory is generated, leading to TAEM guidance commands simultaneously. The commands are utilized to drive the time-domain model to the terminal target. In an attempt to compensate for model uncertainties and initial deviations, the guidance commands are modified periodically by the shrinking-horizon correction mechanism according to current states. Simulations on different scenarios are provided to demonstrate the performance of the proposed guidance strategy. [ABSTRACT FROM AUTHOR]

In this paper, we design a state estimation algorithm for vector state-vector measurement systems over wireless sensor networks subject to bandwidth limitation and communication uncertainty. With the aid of Mahalanobis transformation, vector measurement innovations are decorrelated into the normalised ones to facilitate parallel quantisation. Then, taking account of Gaussian channel noises, a generalised multi-level quantisation mechanism and the minimum mean square error (MMSE) estimator are jointly designed, where optimal quantisation parameters can be solved by minimising the estimation error covariance with given quantisation level. The proposed MMSE estimator not only has a similar recursive structure as the classical Kalman filter, but also dramatically reduces the sensor-to-estimator communication requirement with only a slight deterioration of estimation performance. The combined effect of quantisation mechanism and communication uncertainty on estimation performance is also discussed. Finally, Monte Carlo simulation results illustrate the effectiveness and efficiency of the proposed quantised estimator. [ABSTRACT FROM AUTHOR]

This paper proposes an active fault-tolerant control strategy for a quadrotor helicopter against actuator faults and model uncertainties while explicitly considering fault estimation errors based on adaptive sliding mode control and recurrent neural networks. Firstly, a novel adaptive sliding mode control is proposed. In virtue of the proposed adaptive schemes, the system tracking performance can be guaranteed in the presence of model uncertainties without stimulating control chattering. Then, due to the fact that model-based fault estimation schemes may fail to correctly estimate fault magnitudes in the presence of model uncertainties, a fault estimation scheme is proposed by designing a parallel bank of recurrent neural networks. With the trained networks, the severity of actuator faults can be precisely estimated. Finally, by synthesizing the proposed fault estimation scheme with the developed adaptive sliding mode control, an active fault-tolerant control mechanism is established. Moreover, the issue of actuator fault estimation error is explicitly considered and compensated by the proposed adaptive sliding mode control. The effectiveness of the proposed active fault-tolerant control strategy is validated through real experiments based on a quadrotor helicopter subject to actuator faults and model uncertainties. Its advantages are demonstrated in comparison with a model-based fault estimator and a conventional adaptive sliding mode control. [ABSTRACT FROM AUTHOR]