Search

The advent of additive manufacturing technologies significantly encouraged the development and usage of lattice structures. This paper aims to experimentally investigate the influence of dimension, building position, and orientation on the mechanical properties of Ti6Al4V trusses, manufactured by electron beam melting process, to be used in lattice cells. Specimens were manufactured considering the following parameters: truss diameter (1, 1.5, 2 mm), growth orientation (0°, 45°, 90°), and specimen position inside the building chamber. Trusses with diameter of 1 mm showed inconsistent mechanical properties caused by the poor manufacturing quality. Specimen position was found to influence the analyzed mechanical properties. Unmelted powders were observed to affect the outer surfaces of all specimens and the whole cross-sections of specimens manufactured at 0°. Specimens manufactured at 45° with diameter of 2 mm demonstrated the best performances, whereas specimens manufactured at 90° with diameter of 2 mm displayed the highest elongation at fracture. [ABSTRACT FROM AUTHOR]

PolyEther Ether Ketone (PEEK) is a leading thermoplastic biomaterial renowned for its exceptional overall properties and suitability for processing via Fused Filament Fabrication (FFF) Additive Manufacturing (AM). Despite its widespread use in industries, its fatigue behavior remains a critically underexplored aspect. This study aims to investigate the fatigue behavior of FFF‐produced PEEK, considering variations in infill pattern (triangular or rectilinear) and layer height (0.15 mm or 0.25 mm). Fatigue tests revealed a significant influence of the infill pattern on fatigue behavior, with the rectilinear pattern outperforming the triangular one. Layer height had a negligible effect when paired with rectilinear infill. Specimens with rectilinear patterns exhibited superior fatigue performance, achieving infinite fatigue life at maximum applied stress around 70% of ultimate tensile stress. Surface roughness assessment and fracture surface analysis at scanning electron microscope enhanced the interpretation of the results. This pioneering study lays the groundwork for future research in design for AM. [ABSTRACT FROM AUTHOR]