Search

Hospitals present a widely recognized margin for energy conservation due to their elevated final energy use intensity. Specifically, operating rooms are among the functional areas with greatest energy demand in hospitals, given the stringent indoor conditions for patients and surgical staff. However, energy efficiency in surgical facilities has traditionally been overlooked by the scientific literature in favor of guaranteeing adequate air quality conditions. This paper assesses the potential energy savings that could be achieved in a surgical suite in a Spanish hospital by lowering the current ventilation rates to the lowest energy-demanding values recommended by the proper Spanish standard and other international codes. Likewise, the paper assesses the actual hygrothermal and ventilation conditions in the suite based on the results of a continuous monitoring campaign performed for a period of 12 days. Simulations undertaken with a dynamic energy model specifically developed and calibrated for this work revealed that the average energy intensity of the suite is 1021 kWh/m 2 /year (1685 kWh/m 2 /year for operating rooms), with 80% of the total annual thermal demand corresponding to periods of inactivity. In addition, energy savings between 40% and 80% are possible while complying with both national and international standards. [ABSTRACT FROM AUTHOR]

Background and aims: The focus of this paper is on the improvement of substance use disorder (SUD) screening and measurement. Using a multi‐dimensional item response theory model, the bifactor model, we provide a psychometric harmonization between SUD, depression, anxiety, trauma, social isolation, functional impairment and risk‐taking behavior symptom domains, providing a more balanced view of SUD. The aims are to (1) develop the item‐bank, (2) calibrate the item‐bank using a bifactor model that includes a primary dimension and symptom‐specific subdomains, (3) administer using computerized adaptive testing (CAT) and (4) validate the CAT‐SUD in Spanish and English in the United States and Spain. Design Item bank construction, item calibration phase, CAT‐SUD validation phase. Setting: Primary care, community clinics, emergency departments and patient‐to‐patient referrals in Spain (Barcelona and Madrid) and the United States (Boston and Los Angeles). Participants/cases: Calibration phase: the CAT‐SUD was developed via simulation from complete item responses in 513 participants. Validation phase: 297 participants received the Composite International Diagnostic Interview (CIDI) and the CAT‐SUD. Measurements A total of 252 items from five subdomains: (1) SUD, (2) psychological disorders, (3) risky behavior, (4) functional impairment and (5) social support. CAT‐SUD scale scores and CIDI SUD diagnosis. Findings Calibration: the bifactor model provided excellent fit to the multi‐dimensional item bank; 168 items had high loadings (> 0.4 with the majority > 0.6) on the primary SUD dimension. Using an average of 11 items (four to 26), which represents a 94% reduction in respondent burden (average administration time of approximately 2 minutes), we found a correlation of 0.91 with the 168‐item scale (precision of 5 points on a 100‐point scale). Validation: strong agreement was found between the primary CAT‐SUD dimension estimate and the results of a structured clinical interview. There was a 20‐fold increase in the likelihood of a CIDI SUD diagnosis across the range of the CAT‐SUD (AUC = 0.85). Conclusions: We have developed a new approach for the screening and measurement of SUD and related severity based on multi‐dimensional item response theory. The bifactor model harmonized information from mental health, trauma, social support and traditional SUD items to provide a more complete characterization of SUD. The CAT‐SUD is highly predictive of a current SUD diagnosis based on a structured clinical interview, and may be predictive of the development of SUD in the future. [ABSTRACT FROM AUTHOR]

Abstract: Rodríguez-Ramírez and Yáñez-Camacho (2008), Rodríguez-Vidal et al. (2009) and Rodríguez-Ramírez et al. (2009) have kept an ongoing discussion about the validity of radiocarbon ages in reconstructing Holocene palaeogeographical models in the Gulf of Cadiz. The discussion considered the validity and correctness of the ΔR value to be used in the area to calibrate radiocarbon ages of marine samples. These papers suggest that the ΔR value proposed by Lario (1996) and Dabrio et al. (1999, 2000) is erroneous, and consequently, that all the evolutionary models based on radiocarbon ages from marine samples that have been proposed in this area since 1996 must be revised. However, the papers commented here use erroneously the R, regional R and ΔR values. After reviewing the published data, it is apparent that the most reliable values of ΔR in the Gulf of Cadiz for middle-late Holocene samples range between ΔR =35±85yr and ΔR =95±15yr. This means that the values used in Lario (1996) and Dabrio et al. (1999, 2000) fall in this range, and also that the calibrated ages used by several authors adopting these values are fully reliable. Calibrations using ΔR values inside this range do not yield significant differences in terms of geological age owing to the magnitude of errors resulting from the methods employed. [ABSTRACT FROM AUTHOR]

In this paper, an experimental and numerical approach to the characterization of thermal bridges is presented. The need for this characterization was found within an experimental study in a 2 floor high façade. This façade was constructed with 3 concrete elements which were placed in it to produce a similar thermal bridge effect to the one created by floor slabs traditional building construction in Spain. Commonly applied thermal assessments perform one-dimensional heat transfer analysis over planar elements such as the façades studied in this experiment. However, it is well known that thermal bridges are locations in buildings where one-dimensional heat transfer analysis cannot be applied. This problem was approached by creating a numerical 2D thermal model which was calibrated against experimental data from several temperature and heat flux sensors which were located at specific points in the thermal bridge elements. [ABSTRACT FROM AUTHOR]

Abstract: The application of the regional marine 14C reservoir effect (ΔR) to obtain an accurate calibration of conventional marine shell 14C dates requires prior research concerning the oceanographic conditions and the ΔR of that region. Rodríguez-Ramírez and Yánez-Camacho [A. Rodríguez-Ramírez, C.M. Yánez-Camacho, Formation of chenier plain of the Doñana marshland (SW Spain): Observations and geomorphic model, Marine Geology 254 (2008) 187–196] and afterwards A. Rodríguez-Ramírez, J.A. Morales, J. Borrego and E.G. San Miguel in a reply [A. Rodríguez-Ramírez, J.A. Morales, J. Borrego, E.G. San Miguel, Reply to the comment on “Formation of chenier plain of the Doñana marshland (SW Spain): Observations and geomorphic model” by A. Rodríguez-Ramírez and C.M. Yáñez-Camacho [Marine Geology 254 (2008) 187–196], Marine Geology 263 (2009) 123–125] to the comment by J. Rodríguez-Vidal, F. Ruiz and L.M. Cáceres on the paper mentioned above [J. Rodríguez-Vidal, F. Ruiz, L. M. Cáceres, Comment on “Formation of chenier plain of the Doñana marshland (SW Spain): Observations and geomorphic model” by A. Rodríguez-Ramírez, C.M. Yáñez-Camacho [Marine Geology 254 (2008) 187–196], Marine Geology 263 (2009) 120–122] use, in both cases, not only incorrect ΔR values for the calibration of 14C dates obtained from shell samples collected from the east coast of the Gulf of Cádiz, but they also confuse the ΔR concept with that of R(t), the 14C reservoir age. Because the misunderstanding of these concepts by these authors and, in the first case, also their failure to take into account the ΔR values obtained by us (and already published) from the east coast of Gulf of Cádiz, all the calibrated dates presented either in the first paper or in the reply cannot be accepted. Here I present a new calibrated dataset using accurate ΔR values and I recommend that the conclusions obtained by Rodríguez-Ramírez and their collaborators be revised, as J. Rodríguez-Vidal, F. Ruiz and L.M. Cáceres proposed in their comment. [Copyright &y& Elsevier]

Abstract: Urban growth models developed in the second half of the 20th century have allowed for a better understanding of the dynamics of urban growth. Among these models, cellular automata (CA) have become particularly relevant because of their ability to reproduce complex spatial and temporal dynamics at a global scale using local and simple rules. In the last three decades, many urban CA models that proved useful in the simulation of urban growth in large cities have been implemented. This paper analyzes the ability of some of the main urban CA models to simulate growth in a study area with different characteristics from those in which these models have been commonly applied, such as slow and low urban growth. The comparison of simulation results has allowed us to analyze the strengths and weaknesses of each model and to identify the models that are best suited to the characteristics of the study area. Results suggest that models which simulate several land uses can capture better land use dynamics in the study area but need more objective and reliable calibration methods. [Copyright &y& Elsevier]

Abstract: This paper proposes an approach to calibrate incentives for continuity of supply in electricity distribution in Spain. This approach consists on the estimation of the impact of continuity of supply improvements on distribution network costs. For this purpose, distribution costs resulting from different continuity of supply requirements are computed by a reference network model (RNM). The results obtained from the RNM are used to estimate a cost-function that considers continuity of supply a cost driver for distribution costs. This methodology is applied to three Spanish areas of service (an urban one, a semi-urban one and a rural one) in such a way that differences in distribution costs caused by the characteristics of the area type can be taken into account. The analysis indicated that distribution costs are more sensitive to continuity of supply improvements in rural areas of service. It also demonstrated that the incentive for reducing number of service interruptions should be higher than the incentive for reducing duration of service interruptions. Finally, the current Spanish incentive scheme for continuity of supply was analyzed under the perspective of the proposed approach. [Copyright &y& Elsevier]

Wave reanalysis databases (WRDBs) offer important advantages for the statistical characterization of wave climate (continuous time series, good spatial coverage, constant time span, homogeneous forcing, and more than a 40-yr-long time series) and for this reason, they have become a powerful tool for the design of offshore and coastal structures. However, WRDBs are not quantitatively perfect and corrections using instrumental observations must be addressed before they are used; this process is called calibration. The calibration is especially relevant near the coast and in areas where the orography is complex, since in these places the inaccuracy of WRDB is evident because of the bad description of the wind fields (i.e., insufficient forcing resolution). The quantitative differences between numerical and instrumental data suggest that different corrections should be applied depending on the mean direction of the sea state. This paper proposes a calibration method based on a nonlinear regression problem, where the corresponding correction parameters vary smoothly along the possible wave directions by means of cubic splines. The correction of significant wave height is performed using instrumental data: (i) buoy records and/or (ii) satellite data. The performance of the method is illustrated considering data from different locations around Spain. [ABSTRACT FROM AUTHOR]

Summary: The roughness calibration of floodplain and channels represents an important issue for flood studies. This paper discusses the genesis of scars on trees and their use as benchmarks in roughness calibration. In addition, it presents a methodology to reconstruct unrecorded flood discharge in the Alberche basin of the Spanish Central System. The study is based on the combined use of dendrogeomorphic evidence (i.e. scars on trees), data from the Navaluenga flow gauge (Avila Province) as well as a 1D/2D coupled numerical hydraulic model. A total of 49 scars have been analyzed with dendrogeomorphic techniques. Scar dates are in concert with seven flood events documented in the systematic record (i.e. 1989, 1993, 1996, 2000, 2002, 2003, and 2005). We were also able to identify an additional event dated to 1970, which is before the flow gauge was installed at Navaluenga. Based on the rating curve obtained from the flow gauge, cross-sectional area and data from hydraulic modelling, we cannot find a statistically significant difference between water depths registered at the flow gauge and scar heights on trees (p-value>0.05), indicating that scars would have been generated through the impact of floating wood and that scars on trees would represent a valuable and accurate proxy for water depth reconstruction. Under this premise, we have estimated the peak discharge of the 1970 flood event to 1684.3±519.2m3 s−1; which renders this event the largest documented flood for the Alberche River at Navaluenga. In a last analytical step, we discuss the use of scars on trees as benchmark for roughness calibration in ungauged or shortly recorded basins and address the added value of dendrogeomorphic data in flood frequency analysis. [ABSTRACT FROM AUTHOR]

Abstract: Based on calcareous nannofossil assemblages identified in four expanded and well-dated sections from the Basque-Cantabrian Basin, the main objective of this paper is to improve the knowledge of the Pliensbachian calcareous nannofossil events, and to calibrate these events to the ammonite zones established for this area. The semiquantitative analysis of more than 140 smear slides from the Tudanca and Santotis sections, and the re-analysis of more than 200 smear slides from the Camino and San Andrés sections, have been carried out in order to describe the succession of calcareous nannofossil assemblages. Related to their composition changes, we have recognized and calibrated to the ammonite zones two main events: the first occurrences (FOs) of Similiscutum cruciulus and Lotharingius hauffii, and six secondary events: the FOs of Biscutum novum, Biscutum grande, Biscutum finchii, Lotharingius barozii and the FCOs (first common occurrences) of Calcivascularis jansae and L. hauffii. In the Camino and San Andrés sections, we also identify the FOs of Biscutum dubium, Bussonius prinsii and Lotharingius sigillatus. The obtained data allow us to assess the degree of reproducibility of the Pliensbachian calcareous nannofossil events in the studied area. The biohorizon succession recognized in the Basque-Cantabrian Basin are compared to those proposed for NW Europe, Lusitanian Basin, Italy and Southern France. [Copyright &y& Elsevier]

This paper presents the design, construction and testing of a new photodiode-based pyranometer for the visible spectral range (approx. 400 to 750 nm), whose principal characteristics are: accuracy, ease of connection, immunity to noise, remote programming and operation, interior temperature regulation, cosine error minimisation and all this at a very low cost, tens of times lower than that of commercial thermopile-based devices. This new photodiode-based pyranometer overcomes traditional problems in this type of device and offers similar characteristics to those of thermopile-based pyranometers and, therefore, can be used in any installation where reliable measurement of solar irradiance is necessary, especially in those where cost is a deciding factor in the choice of a meter. This new pyranometer has been registered in the Spanish Patent and Trademark Office under the number P200703162. [ABSTRACT FROM AUTHOR]

The joint use of multiresolution sensors from different satellites offers many opportunities to describe vegetation and its dynamics. This paper introduces the concept of a virtual constellation (defined as an ensemble of all Earth Observation satellites in orbit that satisfy common requirements) for agricultural applications and contributes to providing the necessary inter-sensor calibration methodology for spectral reflectances and NDVI. For this purpose, we performed an observational study, comparing reflectances and the Normalized Difference Vegetation Index (NDVI), from near-synchronous image pairs of Landsat 7 Enhanced Thematic Mapper Plus (ETM+), as the reference sensor and Landsat 5 Thematic Mapper (TM), IRS 1C/D LISS-III (LISS), Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER), QuickBird, and NOAA Advanced Very High-resolution Radiometer (AVHRR). Linear relationships were found for the intercalibration of reflectances and NDVI from one sensor to another, for all sensors, provided that some spatial aggregation was performed. The main source of data dispersion in our linear cross-sensor translation equations is the geolocation uncertainty inherent in the process of geometric correction. Consequently, spatial aggregation always needs to be performed if (different or the same) sensors are to be used to derive time-series of biogeophysical parameters over heterogeneous areas. The homogenous zone approach developed here is recommended as an excellent tool for deriving robust new cross-sensor relationships, provided that the selected homogeneous crops cover the full NDVI range. The linear cross-sensor relationships derived from one image pair were shown to be valid for the whole season and for all areas with similar vegetation and climate. [ABSTRACT FROM AUTHOR]

Abstract: The AHS (airborne hyperspectral scanner) instrument has 80 spectral bands covering the visible and near infrared (VNIR), short wave infrared (SWIR), mid-infrared (MIR), and thermal infrared (TIR) spectral range. The instrument is operated by Instituto Nacional de Técnica Aerospacial (INTA) and it has been involved in several field campaigns since 2004. The main goal of this paper is to analyze the feasibility of retrieving land surface temperature from the 10 AHS thermal infrared bands, from 71 to 80, located in the region between 8 and 13μm. For this purpose, three different methods have been considered: (i) the single-channel method, which uses only one thermal band; (ii) the split-window method, which uses a combination of two thermal bands; and (iii) the TES (temperature and emissivity separation) method, which needs at least four thermal bands. The calibration of the AHS thermal bands and the algorithms have been tested with in situ measurements collected in the framework of the SPARC (Spectra Barrax Campaign) and EAGLE (Exploitation of AnGular effects in Land surfacE observations from satellites) field campaigns, which took place simultaneously in the agricultural area of Barrax (Albacete, Spain), and also in the framework of the AGRISPECTRA field campaign, carried out over an olive orchard in Córdoba (Spain), in July 2004. AHS flights were conducted at two different altitudes, 975m and 2745m above ground level. The results show that AHS bands 71 (8.18μm), 72 (8.66μm), and 73 (9.15μm) were affected by a calibration problem. Taking into account that AHS bands 74 (9.60μm) and 80 (12.93μm) are located in an absorption region, bands from 75 to 79 have been finally selected for land surface temperature retrieval. The single-channel method has been applied to AHS band 75 (10.07μm), which shows the highest atmospheric transmissivity, whereas the split-window method has been applied to the combination between bands 75 and 79 (12.35μm), which provides the best results according to simulated data. All the AHS thermal bands ranging from 75 to 79 have been used in the TES method. The tests conducted on the different algorithms used in this study show that single-channel and split-window methods provided similar results, with root mean square errors (RMSE) between 1.6 and 1.9K. The TES method slightly improved the results, with a RMSE of 1.4K. [Copyright &y& Elsevier]

On-Line monitoring evaluates instrument channel performance by assessing its consistency with other plant indications. Industry and EPRI experience at several plants has shown this overall approach to be very effective in identifying instrument channels that are exhibiting degrading or inconsistent performance characteristics “On-Line Monitoring of Instrument Channel Performance by EPRI (2000)”.On-Line monitoring of instrument channels provides information about the condition of the monitored channels through accurate, more frequent monitoring of each channel''s performance over time. This type of performance monitoring is a methodology that offers an alternate approach to traditional time-directed calibration. On-line monitoring of these channels can provide an assessment of instrument performance and provide a basis for determining when adjustments are necessary. Elimination or reduction of unnecessary field calibrations can reduce associated labor costs, reduce personnel radiation exposure and reduce the potential for miss-calibration.PEANO “A Neuro-Fuzzy Model Applied to Full Range Signal Validation of PWR Nuclear Power Plant Data by Fantoni (2000)” is a system for on-line calibration monitoring developed in the years 1995–2000 at the Institutt for energiteknikk (IFE), Norway, which makes use of Artificial Intelligence techniques for its purpose. The system has been tested successfully in Europe in off-line tests with EDF (France), Tecnatom (Spain) and ENEA (Italy). PEANO is currently installed and used for on-line monitoring at the HBWR reactor in Halden. This paper describes the results of performance tests on PEANO with real data from a US PWR plant, in the framework of a co-operation among IFE, EPRI and Edan Engineering, to evaluate the potentials of PEANO for future installations in US nuclear plants. [Copyright &y& Elsevier]

Abstract: It is paradoxical that work in question (Rodríguez-Ramírez and Yánez-Camacho, 2008) has started a debate in the scientific community about the values of the reservoir effect used in the 14C dates in the Gulf of Cádiz, since in their Comments Rodríguez-Vidal et al. (2009), Monges Soares (2010-this issue) and Lario et al. (2010-this issue), have not taken into account that these values are in reference to earlier studies (Morales et al., 2008). The new figures suggested by Rodríguez-Vidal et al. (2009) and Monges Soares (2010-this issue) for this part of the Gulf of Cadiz (Soares, 2008) had not been reported when the earlier papers were accepted and published. The values for the reservoir effect applied on the South Atlantic coast of the Iberian Peninsula need to be continually adjusted, due to the new contributions that have been made in recent years as a result of developments of the research being undertaken in this field. Without doubt, in the future, as further progress is made, the values will be even more finely tuned and the present ones will become obsolete, as our understanding of marine and estuarine dynamics in this sector over the last few thousand years is a topic which remains open to new interpretations. The new figures for the reservoir effect are an important contribution in determining more accurately the chronology of events in the Holocene, and they make it necessary to revise the previous studies on marine Holocene formations in the Gulf of Cadiz with 14C dates, owing to the errors that have occurred in this respect. For this reason the Comment should not be aimed at one paper alone, and instead this matter should be reviewed at a regional level. Those of us who are not specialists in the topic welcome these clarifications, which can help shed additional light on the chronological problems. [ABSTRACT FROM AUTHOR]