Search

I enumerate some of the narratives about the electricity sector in India and examine them in detail. Coal is a major source for energy in India and forms a significant part of India's present electricity mix, while the share of renewable energy sources is increasing. Share of hydro has declined over the years, and the share of nuclear is set to rise as several reactors are under construction and more have been approved. The paper comments on limitations of using levelized cost of electricity generation as a metric for comparing different technology options and suggests replacing it by an approach based on system modelling. Electricity demand is rising, and renewable energy sources and large hydro cannot meet the total projected demand. Switching over to a mix that addresses environment concerns has a cost attached to it and these costs need to be recognized and paid. After an examination of narratives, the paper ends with detailed observations about the electricity sector with the objective of providing evidence-supported perspective to public and also inputs for the formulation of policies. [ABSTRACT FROM AUTHOR]

India has set aggressive targets to install more than 400 GW of wind and solar electricity generation by 2030, with more than two-thirds of that capacity coming from solar. This paper examines the electricity and carbon mitigation costs to reliably operate India's grid in 2030 for a variety of wind and solar targets (200 GW to 600 GW) and the most promising options for reducing these costs. We find that systems where solar photovoltaic comprises only 25 to 50% of the total renewable target have the lowest carbon mitigation costs in most scenarios. This result invites a reexamination of India's proposed solar-majority targets. We also find that, compared to other regions and contrary to prevailing assumptions, meeting high renewable targets will avoid building very few new fossil fuel (coal and natural gas) power plants because of India's specific weather patterns and need to meet peak electricity demand. However, building 600 GW of renewable capacity, with the majority being wind plants, reduces how often fossil fuel power plants run, and this amount of capacity can hold India's 2030 emissions below 2018 levels for less than the social cost of carbon. With likely wind and solar cost declines and increases in coal energy costs, balanced or wind-majority high renewable energy systems (600 GW or - 45% share by energy) could result in electricity costs similar to a fossil fuel-dominated system. As an alternative strategy for meeting peak electricity demand, battery storage can avert the need for new fossil fuel capacity but is cost effective only at low capital costs (USD 150 per kWh). [ABSTRACT FROM AUTHOR]

Majority of the power generation in India is carried out by conventional energy sources, coal and fossil fuels being the primary ones, which contribute heavily to greenhouse gas emission and global warming. The Indian power sector is witnessing a revolution as excitement grips the nation about harnessing electricity from various renewable energy sources. Electricity generation from renewable sources is increasingly recognized to play an important role for the achievement of a variety of primary and secondary energy policy goals, such as improved diversity and security of energy supply, reduction of local pollutant and global greenhouse gas emissions, regional and rural development, and exploitation of opportunities for fostering social cohesion, value addition and employment generation at the local and regional level. This focuses the solution of the energy crisis on judicious utilization of abundant the renewable energy resources, such as biomass, solar, wind, geothermal and ocean tidal energy. This paper reviews the renewable energy scenario of India as well as extrapolates the future developments keeping in view the consumption, production and supply of power. Research, development, production and demonstration have been carried out enthusiastically in India to find a feasible solution to the perennial problem of power shortage for the past three decades. India has obtained application of a variety of renewable energy technologies for use in different sectors too. There are ample opportunities with favorable geology and geography with huge customer base and widening gap between demand and supply. Technological advancement, suitable regulatory policies, tax rebates, efficiency improvement in consequence to R&D efforts are the few pathways to energy and environment conservation and it will ensure that these large, clean resource bases are exploited as quickly and cost effectively as possible. This paper gives an overview of the potential renewable energy resources in Indian context while evaluating the present status, the energy demand of the country and forecast consumption and production, with the objective to evaluate and assess whether India can sustain its growth and its society with renewable resources. [ABSTRACT FROM AUTHOR]

Renewables around the globe, provide fuel diversification, energy security and produce little or no emissions during the electricity generation. The unavailability of rotating masses prohibits on-grid renewable energy generation systems from providing inertia during a frequency disruption. This would be extremely unsettling and impactful when the proportion of energy in the grid due to renewables is high. India currently, has a 28.04% share of on-grid renewable energy. The grid infrastructure systems of India would face severe challenges when the share of on-grid renewables leaps past 50% in the future. Thus, this paper primarily addresses the repercussions of increasing share of on-grid renewables in terms of inertia and frequency response in India. The energy scenario of 2040 in India under 80% proliferation of on-grid renewables has been well reviewed in this paper. The novelty of this paper is the narrative literature review of the Indian Electricity Grid Code (IEGC) on frequency response which is unique and exclusive to this manuscript. It demonstrates the current strategies prevalent in the grid system of India towards frequency response and inertia support. This paper also explains the diverse control strategies and energy storage technologies required for adoption with the on-grid renewables in India for frequency response. The other novelty in this paper is the insight about the inertia lost due to an on-grid 100-kW p solar photovoltaic system to explain the readers about the impact when the integration is hundreds to thousands of kilowatts. • Share of renewables in the Indian grid network is 28.04% (113.226 GW) as of 2022. • India aspires to achieve 54% share of on-grid renewables by 2030 and 80% by 2040. • Indian Electricity Grid Code indicates need for expansion in active power reserves. • India requires diverse control strategies and energy storages for inertia support. • On-grid 100-kW p solar photovoltaic system loses inertia of 100-kW for 4.44 s. [ABSTRACT FROM AUTHOR]

With increasing awareness towards environmental concern, efforts are made to reduce harmful effects of conventional electricity generation methods and uses of renewable sources of energy to generate electricity. India has enormous potential of renewable energy resources to meet its power generation requirements. India can meet with global footsteps in the economic and social advances through the advancement in field of renewable sources. In remote area applications, where grid approach is either not feasible or very costly, hybrid energy systems are recommended to supply electric power needs of single or multiple user utility for household or irrigation applications. In the areas where grids are not connected, electrical power can be generated by solar cells, wind turbine generators, hydro power plants or diesel engine generators. Multiple sources can be combined for generating the desired electrical energy for remote areas. When majority of the sources are renewable generating sources, then the combination is known as Hybrid Energy System. The purpose of this study is to provide a conceptual framework for hybrid system setup, modeling, renewable energy sources, criteria for hybrid system optimization and control strategies, and software utilized for optimal sizing. In addition, this paper gives a mathematical model of the hybrid system components, highlighting the significance of power reliability and system cost, and discusses a comparison of the most popular topologies utilized for the implementation and sizing of HRES. This article concludes with a comprehensive review of the various algorithms and software programmes utilized for size optimization. Then the paper also discuss the various uncertainty analysis in HRES size optimization. • This paper present a review of HRES size optimization and forecasting methodologies. • The comprehensive review of HRES optimization and software tools is presented. • For knowledge collection of HRES, various reviews and surveys are conducted in past. • Old literature not give social, technical, economic, environmental, reliability aspect. • Review of solar and wind forecasting methods are not discussed for HRES optimization.. • Effect of using forecasted weather data on HRES is not properly analyzed till date.. • Performance of HRES optimization algorithm and forecasting effects are analyzed. [ABSTRACT FROM AUTHOR]

Highlights • India has set a goal to achieve 40% cumulative electric power installed capacity from non-fossil fuel based energy resources by 2030. • Indian bioenergy sector increased by 5.42 times in last 10 years. • Small scale biomass gasification plants, solution for waste biomass disposal. • Energy generation for environment protection. • Reducing air pollution by utilizing crop residue in energy generation. India is an agriculture based economy, and also has a forest cover that comprises roughly 24% of its total geographic area. Thus, an abundance of biomass, in the form of waste material is readily available throughout the country annually. The forest biomass, which consists of deadwood and residues, and the agricultural biomass in the form of crop residues, are presently disposed of by burning, which causes air pollution and damage to the local ecology. This waste biomass can be better used for electricity generation using gasification technology. The total installed capacity for electricity generation in India is 344 GW as of March 2018. Renewable energy makes up 20% of this total, and bioenergy, in turn, makes up 14% of renewable energy. Bioenergy makes up 2.8% of total energy installations in India at present. However, the power being generated through bioenergy sources is about 9.5 GW. In this paper, the most recent statistical data regarding energy generation through bioenergy resources has been presented using currently available sources. Brief descriptions of gasification conversion routes have also been included, with their sustainability conditions, as well as the government policies necessary for implementation in the Indian context. [ABSTRACT FROM AUTHOR]

The term “polygeneration” is referred to as “an energy supply system, which delivers more than one form of energy to the final user”, for example: electricity, heating/cooling, desalination can be delivered from polygeneration process. The polygeneration demonstrates unique integration of energy efficiency and renewable energy. It is the next generation energy production technique with a potential to overcome intermittence of renewable energy, reduce cost of power generation and greenhouse gas emissions. The feasibility study of this paper is divided in three sections: In first section of this study, solar and biomass have been arranged to produce steam for power generation. In the second section, cooling is produced by vapor absorption refrigeration (VAR; LiBr-H 2 O) system as per demand load requirement using steam, extracted from pass-out turbine. In the last section of this paper, multi effect dehumidification (MED) water desalination is produced by using limited amount of heat from water vapor (refrigerant; H 2 O) through HE1 of VAR cooling system. [ABSTRACT FROM AUTHOR]

Thermal power plants in India emit around 500 Mt of CO 2 annually. All of it is released into the atmosphere untreated. Microalgae, a third generation feedstock for bio-fuel emerges as a viable option for partly sequestering the emissions. Moreover, its carbon capture capacity of 4.8 kg CO 2 /kg biomass, which is very much as compared to terrestrial substitutes like Jhatropa curcas , enables to produce bio fuel hence adding value to the entire process. This paper intends to build upon this idea and come up with strategies to integrate bio fuel production and CO 2 sequestration with the existing thermal power plants. The raw materials needed for algal growth are available in the plant as elaborated in the paper. Thus the bio fuel produced can be routed back to power the plant consequently lowering the dependence on coal. This would help in putting a check on the carbon emissions thus making the existing systems more environmentally benign and suitable for long haul. This paper reviews currently employed carbon capture technologies and methods and comes up with a strategy to subsume carbon capture through microalgae with power plants of a certain capacity. 3 t/day is taken as the basis for calculations in the proposed flow sheet. An alternative of the above is also provided which substitutes the biofuel production with co-firing. This escalates the nitrogen content of flue gas but deescalates the investment. This brings down the capital investment in the plant but enhances N 2 content of flue gas. Carbon leakage is accounted for in a table of atomic balance. It takes care of input and output of carbon. The paper is inclined towards the conclusion that the Microalgae possess incredible potential and if tapped efficaciously could prove to be extremely helpful in these days of power and environmental crisis. [ABSTRACT FROM AUTHOR]

Wind energy is a popular from the non-conventional energy sources in the World. In India states like Tamil Nadu, Gujarat, Orissa, and Maharashtra are as regarded as superior areas with respect to this type energy. The installed capacity of wind in India till December 2010 was 13,056.37 MW, principally distributed throughout the Maharashtra, Tamil Nadu, Rajasthan, Karnataka, Andhra Pradesh, Gujarat, Kerala, Madhya Pradesh, West Bengal, etc. In Maharashtra, there are 38 wind farms and the 3655 wind machines are installed with the 3431.86MW capacity of power generation up to September 2013. In Satara district, 17 wind sites and also other some sites are discovered. At present there are 1636 wind turbines are installed with its capacity of power generation is 1122.61MW and the production of wind energy of 2183745.15KWh average per annum in Satara district.The main objectives of the present paper are to assess the scope of non-conventional energy resources especially the power generation from wind and to analyze the trend and distribution of the wind mills and wind farms in Satara district. It is find out the amount of recovered from the power generation comes around 12 years without subsidy and around 8 years with subsidy. The total life span of wind turbines is 25 years. It is very much clean and does not cause any problem to the environment as well as to the survival on the surface of the earth. Therefore, it is inferred that the generation of power from wind is not only cheaper and permanent energy source but also a non-polluting, freely available source. It is helpful for the development of economically and socially in a region especially in rural development. With these consequences the income level will increase and it will further help in minimising the social disparities. [ABSTRACT FROM AUTHOR]

The aim of this paper is to model a hybrid energy system for rural India. In this analysis a hybrid renewable system consists of solar-wind-hydrokinetic-bioenergy is proposed. Overall analysis including Optimization and sensitive analysis are evaluated by HOMER software. Optimized results are evaluated considering total net present cost, cost of energy, annual electric generation, renewable fraction and CO 2 emission. The analysis is done in order to increase efficiency of the system with comparatively less cost. From this exercise it is found that, combinations of more varieties of different renewable energy system are better to fulfill futuristic demand. Futuristic demand is calculated by logistic growth model. The value of COEs ($) and total generations (kWh/yr) are 0.3563 and 133045; 0.247 and 170948; 0.242 and 179018; 0.241 and 179303 for the year (2012–2021), (2022–2031), (2032–2041) and (2042–2051) respectively. However some other combinations may produce more power, although in such cases, in order to storage excess power COE will increase. As compared to the year (2012–2021) to (2042–2051) the optimized COE of electricity is minimized, keeping Annual cost nearly constant and amount of electric generation is increased without much effect on environment. [ABSTRACT FROM AUTHOR]

The present paper seeks to examine the effects of electricity generation efficiency on the index of human capital in India over 1980–2021 through the novel multi threshold non-linear autoregressive distributed lag model. We find strong evidence that the effects of efficiency in the generation of electricity on human development have varied across thresholds/quantiles. We suggest that, for improving human development in India by suitable energy policies, both policy makers and the public sector managers will need to make directed efforts to use most robust and energy saving technologies in the electricity generation process. • The study addresses the relationship between efficiency in the electricity generation process and human development. • The MTNARDL method is used because conditional mean analysis failed to provide the inner dynamics of the relationship. • We find strong evidence that the said relationship varied across thresholds/quantiles in the short and long run. [ABSTRACT FROM AUTHOR]

This paper analyses the asymmetric effects of electricity prices on industrial electricity demand in India from 1981 to 2016 using the two-threshold nonlinear autoregressive distributed lag (NARDL) model. The results show that customers react more strongly to a large price cut than a large price increase, whereas a small price change does not affect electricity consumption. A large price decrease, which raises the quantity demanded by a higher percentage, makes it more challenging to reach net-zero emissions as electricity generation relies mainly on fossil fuels. Since demand is inelastic for price increases, a large price hike minimally reduces electricity consumption. • Demand is more responsive to a large decline than a large rise in electricity prices. • A small price change does not significantly affect industrial electricity consumption. • There is evidence of asymmetric price effects on industrial electricity demand. • Industrial electricity consumption has grown as fast as industrial output. [ABSTRACT FROM AUTHOR]

In India, uniform price was assigned to renewable energy certificate (REC) irrespective of renewable energy (RE) type, technology, and location. Moreover REC price bands are higher than existing preferential tariff. There are distinct renewable purchase obligations (RPOs) specified for various RE types, whereas there is lack of efficient tools to check RPO compliance. Because of these reasons, REC market stabilisation is getting delayed. This paper proposes a method using plant performance multiplier to convert non-solar and solar REC to single equivalent REC with competitive REC pricing, which can be traded on unified REC market. The method combines solar and non-solar RPOs into a single composite RPO, to make RPO compliance and its checking simple and efficient. A sample illustration of the proposed method is given. The benefits offered by the proposed method in REC pricing, REC trading and RPO compliance are discussed. A comparative economic analysis of present and proposed method is reported. [ABSTRACT FROM PUBLISHER]

As resources of electricity generation in India are not sufficient, this paper analyses the potential of electricity import from neighboring countries to meet the future electricity requirements of India. Based on the data of electricity generation, consumption, and future generation potential, we work out projected electricity generation/ demand of India and its neighboring countries by 2050 to identify the possibility of India’s cross-border electricity trading with its neighboring countries, more particularly the electricity import potential. [ABSTRACT FROM AUTHOR]

Abstract: Mini-Hydro power generation could be planned on small-scale on existing small rivers, canals etc. as it could be beneficial in utilization of all existing water reservoirs and streams so as to generate hydro power which is renewable in nature. By this, they do not encounter the problems of rehabilitation of people and environmental problems associated with the large hydro power plants. This paper presents the case study of two potential sites namely Shahnoor and Purna in Vidarbha region of Maharashtra State in India. Here, the hydrological data of a potential site for nearly sixty years is obtained and is thoroughly studied for possible development of mini hydro power plant. The basic parameters those are to be included in feasibility report which is to be prepared for every proposed hydroelectric project are also mentioned. This paper could be well utilized for planning and irrigating land in and around rural areas. [Copyright &y& Elsevier]

Abstract: In recent years the decentralized rural electrification is becoming cost effective and convenient for areas where grid extension is very difficult. The present paper deals with the electrification of dense forest areas of Uttarakhand state in India by Integrated Renewable Energy Optimization Model (IREOM). The IREOM consists of locally available renewable energy resources such as Micro-Hydropower (MHP), biomass, biogas, wind and solar photovoltaic (SPV) systems have been used to meet electrical energy and cooking energy needs of a cluster of villages. The paper includes the selection of different system components, sizing and development of a general model to find out optimal combination of energy subsystems for the selected study area in order to minimize the cost of energy (COE) generation for a required reliability values. The sizing of different renewable energy system components has been carried out so that they are suitable for four different seasonal load profiles. The two reliability values are considered for the selection of optimum solution of year round application. The model developed for this purpose, has been found to be quite useful in optimizing the renewable energy system sizes that are available in market. The proposed model totally depends on the renewable energy systems and eliminates the use of conventional energy systems. [Copyright &y& Elsevier]

Availability Based Tariff (ABT) has been implemented in all the regional grids of India for improving grid discipline by frequency dependent pricing. Currently it is limited to short-term energy transactions between the beneficiary States and Central generating stations without the need for negotiations on price or quantum in real time. In the present scenario, Independent Power Producers (IPP), Captive Power Plants (CPP), small Distributed Generation (DG) like mini-turbine, fuel cell, etc., are not considered under ABT. DG units are normally modular in size and they can be placed close to consumers so as to reduce the T&D costs and losses. Hence, they need to be encouraged so as to meet the ever-increasing electricity demands of Indian power sector within the financial constraints. In this paper, impact of IPPs, CPPs and DGs on intra-State ABT is studied. This paper also proposes to study the impact of grid connected DG on network availability and reliability. The improvement in system reliability is studied after evaluating reliability indices like SAIFI, SAIDI, etc., with the inclusion of DG. [ABSTRACT FROM AUTHOR]

The future economic development trajectory for India is likely to result in rapid and accelerated growth in energy demand, with attendant shortages and problems. Due to the predominance of fossil fuels in the generation mix, there are large negative environmental externalities caused by electricity generation. The power sector alone has a 40 percent contribution to the total carbon emissions. In this context, it is imperative to develop and promote alternative energy sources that can lead to sustainability of the energy–environment system. There are opportunities for renewable energy technologies under the new climate change regime as they meet the two basic conditions to be eligible for assistance under UNFCCC mechanisms: they contribute to global sustainability through GHG mitigation; and, they conform to national priorities by leading to the development of local capacities and infrastructure. This increases the importance of electricity generation from renewables. Considerable experience and capabilities exist in the country on renewable electricity technologies. But a number of techno–economic, market-related, and institutional barriers impede technology development and penetration. Although at present the contribution of renewable electricity is small, the capabilities promise the flexibility for responding to emerging economic, socio–environmental and sustainable development needs. This paper discusses the renewable and carbon market linkages and assesses mitigation potential of power sector renewable energy technologies under global environmental intervention scenarios for GHG emissions reduction. An overall energy system framework is used for assessing the future role of renewable energy in the power sector under baseline and different mitigation scenarios over a time frame of 35 years, between 2000 to 2035. The methodology uses an integrated bottom-up modelling framework. Looking into past performance trends and likely future developments, analysis results are compared with officially set targets for renewable energy. The paper also assesses the CDM investment potential for power sector renewables. It outlines specific policy interventions for overcoming the barriers and enhancing deployment of renewables for the future. [Copyright &y& Elsevier]

The utilization of biomass resources for power generation can reduce environmental emissions while fulfilling energy requirements in developing countries. But, the biomass conversion to electric power seems to be financially viable under optimized conditions (for some economic objectives). This paper presents a step-by-step methodology to determine the possibility of installation of straw based power plants in a region. Further, various issues regarding installation of power plants are discussed and reviewed. The study takes into consideration the average fuel distribution, the straw collection mechanism, the plant characteristics and the economic objectives. The methodology has been used for optimal sizing of the straw based plants in Punjab (a north Indian state) for minimum power cost and investment. The optimization models that can handle all possible restrictions for installation of the plants are applied and the results are analyzed under the influence of input parameters. The study indicates that the optimum capacity of plant is of the order of 20 MW, which can produce electricity at a cost of 5 Rs/kW h. Each plant requires a collection radius of 14 km for providing a continuous and sustainable fuel to the plant. The capital cost required for installation of the plant has been estimated to be 45,144 Rs/kW. In order to achieve these objectives, it is essential to integrate the power generation system with the biomass management system. The literature review shows that an efficient biomass recovery system is required to be developed for collection of agricultural straw (within the stipulated time) for implementation of power generation programme in the state. In overall, the study reveals that the efficient utilization of straw for electric power requires careful identification of different techno-economic parameters like biomass management cost, scale factor, fuel supply and thermal efficiency. [ABSTRACT FROM AUTHOR]

In the recent years, small scale power generation has been recognized as a suitable option for energy access in isolated rural areas due to uneconomical grid extension. A techno-economic feasibility study on the development of an Integrated Renewable Energy System (IRES) is carried out in the paper in order to meet the electrical and cooking energy demands of cluster of village hamlets of Chamoli district of Uttarakhand state (India). An attempt has been made to estimate the potential of locally available renewable energy resources and demands of the study area. The selection of small wind turbine model for the site specified is performed among the various models available in market. Further, nine different combinations of renewable energy resources have been investigated by considering economic, technical and social aspect criteria. Finally, a sensitivity analysis has also been carried out in order to determine the most sensitive parameter of the system. [ABSTRACT FROM AUTHOR]

Small Hydro Power (SHP) is one of the most important renewable energy generation sources. It is a cost-effective technology that is being used for rural electrification in the developing countries including India. The Indian government is providing attractive initiatives to the private investors to promote faster development of SHP. Until now, a lot has been written about assessment, potential, advantages and the technical aspects of the SHP plants. However, the important business sustainability perspective has not been yet subjected to empirical analysis. Sustainable development involves three interconnected dimensions: social, economic and environmental sustainability. This paper attempts to investigate whether SHP business in India is a sustainable business. The study is based on the analysis of qualitative data acquired through 28 in-depth interviews with various actors that are connected to the SHP industry in India which include Independent Power Producers (IPPs), manufacturers, designers, consultants and representatives of various government organizations. The empirical material was collected in four states of India namely New Delhi, Himachal Pradesh, Uttarakhand and Jammu and Kashmir (J&K) in February, 2013. The data was acquired by individual in-depth interviews, group discussions and direct observation of one SHP plant. The results show that all the three dimensions of sustainability are being realized to a certain extent. However, utmost efforts have to be undertaken in order to call this sector completely sustainable. Both benefits and challenges in all these dimensions are highlighted and recommendations towards a sustainable SHP sector are provided. Further, this study also proposes suggestions for the interested investors. [ABSTRACT FROM AUTHOR]

Renewable energy can play a strategic role in India in meeting the country’s growing energy demands, as well as combating climate change. Policymakers have recognized this potential and over the last decade have intensified their efforts towards creating a conducive regulatory and policy framework. Policy instruments such as renewable obligations, feed-in-tariffs and generation based incentives have specially aided the transformation towards large scale generation, enabling higher efficiency and lower costs of generation. However, financing has emerged as a significant barrier for sustaining the momentum gained in recent years. Given this background this paper provides an overview on the evolution of large scale generation and the consequent changes in financing requirements. It further reviews the emerging trends and barriers in the financing landscape and analyses the impact of policy performance in this context. Finally, it considers the design of a national renewable finance framework complete with targeted finance push instruments that can complement existing demand pull policies in facilitating investment. [ABSTRACT FROM AUTHOR]

Small hydropower projects (SHPs), though generally considered more environmentally benign and socially acceptable as compared to large projects, yet their overall sustainability is under suspicion in the Himalayan regions. Almost all SHPs in this region are being developed as run of the river mode which generally causes less/no submergence and quite less displacement of people as compared to large reservoir based hydropower production mode. However, in the absence of proper planning and monitoring mechanism, these projects are causing implacable tunnelling of hills, choking of streams, conversion of streams into dry ditches and long term socio-environmental impacts. This paper presents a SHP development study from hydro rich Beas river basin of Himachal Pradesh, a state nestled in western Himalayan region of India. In depth field studies, focus group discussions with the project affected people and interaction with project proponents of five SHPs in this region suggest that sustainability issues with respect to SHPs are not small vis-a-vis size of their installed capacity. There is an urgent need to take steps to include SHPs having an installed capacity of above 10 MW into the ambit of environment clearance process which is absent in many countries of the world at present. [ABSTRACT FROM AUTHOR]

Common information model (CIM) in vogue represents transmission and distribution components, and market operations in the perspective of electrical system, as unified modeling language (UML) objects. UML is object centric. CIM can offer interoperability and facilitate model exchange for large systems and is being adopted by many utilities. However, dealing effectively with multiple business processes is the backbone of the restructured power systems. Since CIM lacks chronological process sense, this has to be superimposed on CIM models, which is not easy due to inherent limitations of UML. To overcome this, this paper proposes to utilize business process modeling notation (BPMN) standards as a kind of pre-processor. BPMN is used to represent process centric interoperability requirements as business objects. UML object representation in CIM model is derived subsequently from it. The proposal is illustrated with an application use case—deriving CIM model of day-ahead market (DAM) transaction of distribution company, from its business process representation. Semantic model of DAM transaction using CIM IEC 62325 (Markets) and extensions required are presented with a sample Indian system. DAM models in BPMN and CIM can be utilized to build an efficient software application. [ABSTRACT FROM PUBLISHER]

India has tremendous potential for generating clean electricity through Renewable Energy Sources (RES) namely Hydro, Wind and Solar. This potential has been duly recognized and shows India׳s consciousness for reducing carbon footprint as a developing nation. Government of India with an aim to promote clean energy launched Jawaharlal Nehru National Solar Mission (JNNSM) on 11th January 2010, which is one of the eight missions under National Action Plan on Climate Change (NAPCC–2008). This mission visions to install 22,000 MW through grid connected and off grid power plants. Achieving an installed capacity of this quantum is a task full of challenges. To list the possible challenges and suggest a way forward, there is a need to study solar energy sector in India in the past, which has motivated the authors to discuss the evolution of solar energy in India since independence. Through this paper authors have tried to outline the journey of solar energy in India since 1950 till date and highlight the potential issues as barriers and challenges which could impact the ambitious mission taken up by Government of India. This study will help decision makers and various stakeholders to understand the current status, barriers and challenges for better planning and management in the field of solar energy. [ABSTRACT FROM AUTHOR]

This research aims to bridge the gaps to produce sustainable energy cost-effectively and technically efficient. The paper explores the techno-economic-environmental viability of photovoltaic (PV)/biomass energy potential for a rural village, Sidhwanbet, Punjab, India. The data investigation was performed by HOMER Pro v3.14 software. A hybrid renewable energy system (HRES) was designed, simulated and modelled to ensure the continuous energy supply for 770 households. The proposed optimal HRES consists of a PV module, biomass generator, converter and battery with the static specification and further improved by optimization. The optimal HRES out of the best five configurations was elected with Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) based on net present cost (NPC), cost of energy generation (COE), operating cost (ƠƇ), initial capital cost (ƗƇƇ), energy generation (ĖƓ), and a renewable fraction (Ȓϯ). The selected optimal HRES has been analyzed for economic, renewable energy and environmental aspects. The sensitivity study had performed while considering the discount and inflation rate. A simulation was performed for a 10-kW biomass generator, 1.1 kW solar array, five lithium-ion batteries, and a 3.96 kW converter. Results revealed that the PV's payback period (PBP) was 1.58 years, less than the useful life of optimal HRES. The cost of constructing an HRES for 25 years was equivalent to $21087, including initial cost, operating, replacement, and project costs. Thus, 35.6% of the necessary electricity is generated with PV and 64.4% biomass under optimal conditions for a 100% renewable energy integration. The CO 2 /year emission performance of optimal HRES is much better than Grid-only and PV-diesel generators. This technique may be used in rural regions in every other developing nation. [Display omitted] • Study of hybrid PV/Biomass/Battery energy for India rural area. • Design and optimization for off-grid electricity generation system using HOMER. • Technically and financially viable optimal configuration costs 0.0362 $/kWh. • System performance economically and environmentally analyzed by sensitivity analysis. • HRES reduced GHG compared to conventional grid and PV-biogas generator only. [ABSTRACT FROM AUTHOR]

Abstract: Energy consumption in developed as well as developing countries is high, especially in the residential and commercial building sectors. Researchers have been working on several technologies for the reduction of energy consumption in buildings; among them, energy-harvesting techniques are quite promising. In this paper, we explore a possibility of harnessing energy from grey water, while it flows down through high-raised buildings. We propose the usage of a micro/pico hydro turbine installed at the ground floor of a high rise building that utilizes the energy of grey water falling from floors above, to generate electricity. The electrical energy generated from the turbine can be utilized further in numerous ways. Scaled prototype of the same has been developed and tested. The proposed design of a gravity-energized wastewater system in high-rise buildings for generation of hydroelectricity is being checked for its feasibility in Indian markets. Calculation shows that the proposed system is commercially promising for most of the major cities in India. We also discuss cost benefits analysis of the proposed system to support our claims for possible commercialization of this technology. [Copyright &y& Elsevier]

Abstract: During the colonial times, electricity in India developed for a significant part thanks to British investment. Its growth remained modest and mainly linked to industrial needs, public lighting and common transportation. World War II stimulated industrial production and, consequently, the demand for electricity. The immediate years following the war were even more promising since the preparations for national Independence included a major restructuring of electricity generation and distribution. The 1948 Law on electricity and the first 5-year plans which began in 1951 set the framework for a major development. Instead of nationalization, India chose a policy which allowed for the participation of both private and public enterprises. British and Indian private investment responded positively to the change. At the beginning of the 1950s, the British presence was felt in the power industry. However, a decade later, it was already diminishing. This paper explains the nature of the policy which allowed a partnership between private and public sectors, the reasons why the latter finally prevailed over the former and the consequences on British investment. [Copyright &y& Elsevier]

Abstract: The paper introduces the approach and concept for DSM in India. A comprehensive methodology for implementing a DSM programme in India has been outlined. Detailed step wise action plan formulated for planning and implementing of DSM programme in India is presented. Various policies and regulations framed by India for promotion of DSM activities targeting different sectors are studied. The deficiencies in the existing regulatory and policy framework which have withheld deployment of DSM programmes on a large scale in India have been identified. A number of barriers and challenges that are needed to overcome for realizing the potential of DSM in India are also discussed. [Copyright &y& Elsevier]

Distributed power generation based on renewable energy sources brings new life and hope to electrify remote villagers. The proposed work suggests the techno-economic feasibility of three different energy-supplying alternatives namely the solar photovoltaic (SPV) system, diesel generator system and extending the grid connection for energy supply to a remote village located around 15 km away from the place where grid supply is available. Design of all the above three systems along with their economic analysis is carried out in this paper. A comparison on the basis of economic indicators like unit cost of electricity, net present value and payback period among the three systems is also discussed. The results show that the SPV system is economically more viable among the three options apart from environment benefits. This study may provide a new direction for energy planners to supply energy in remote non-electrified areas of India through SPV systems. [ABSTRACT FROM AUTHOR]

Present day India has tremendous energy requirements, and with each day it is becoming more difficult to meet those needs through conventional power sources. The never-ending demand of population which is growing exponentially has become very tough to fulfill. To enhance its energy security, mitigate carbon emissions and augment its economic development, it becomes an urgent need to implement innovative policies and mechanisms for the adoption of green and clean energy. India because of its demographics has good solar energy potential. This study aims to examine the solar power implementations in thermal power plants situated all across India. This paper contributes to the literature on solar power by identification of barriers for the adoption of solar power in thermal plants. Still, there is some lack of study about solar power implementations in different areas. In this paper, investigating efforts have been made to examine the solar power implementations in thermal power plants within the Indian context by identifying key barriers. In this study, Interpretative Structural Modeling (ISM) has been adopted to find the contextual relationships among key barriers and Matriced'Impacts Croises- Multiplication Applique' an Classment (MICMAC) analysis has been carried out for validation of the model. Requirement of gigantic investment, longer recovery period, safety implications, environmental implications, and societal concerns emerge at the top level in ISM structure. Lack of adequate government policies and lack of political leadership appears at the bottom of a structured model and these emerged as the most influential barriers. This research also suggested how to mitigate the key barriers by the installation of solar power in electricity generation utilities. • Identify and evaluate nineteen barriers which influence the development of solar power in Indian thermal power sector. • Establish ISM hierarchy structure to show the contextual relationships among the barriers. • MICMAC technique is conceded for validation of the established ISM model. • Suggestions are proposed to mitigate the key barriers for the development of solar power in electricity generation utilities. [ABSTRACT FROM AUTHOR]

Contrary to conventional fossil fuel-based electricity generation technologies, renewable energy centered technologies, specifically small hydropower, release a lesser amount of anthropogenic greenhouse gases but are normally more expensive. A major segment of the capital investment in the current small hydropower scenario accounts for equipment and construction process costs. The construction and cost administration process are generally limited to analysis of the capital cost of civil constructions, electro-mechanical equipment works, neglecting the costs related to operating and maintaining the plant, replacement or refurbishment, certified emission reductions, among others. Contemporary studies indicate that these costs form a substantial fraction of the total capital investment. Consequently, for cost management and investment decision making, small hydropower plant developers are drawing increased attention in recent years towards conducting life cycle costing studies that take into account the ignored costs. In addition, small hydropower plants in developing nations can become more competitive by trading the emission reductions achieved under the provision of the Clean Development Mechanism, an outcome of the Kyoto Protocol proposed at the United Nations Framework Convention on Climate Change. In this paper, a modest attempt has been made to determine the Levelized cost of electricity generation using life cycle costing methodology, which accounts for all the costs over operating lifetime on a range of small hydropower plants and the results are analyzed. [ABSTRACT FROM AUTHOR]

Abstract: Carbon footprint (CF) refers to the total amount of carbon dioxide and its equivalents emitted due to various anthropogenic activities. Carbon emission and sequestration inventories have been reviewed sector-wise for all federal states in India to identify the sectors and regions responsible for carbon imbalances. This would help in implementing appropriate climate change mitigation and management strategies at disaggregated levels. Major sectors of carbon emissions in India are through electricity generation, transport, domestic energy consumption, industries and agriculture. A majority of carbon storage occurs in forest biomass and soil. This paper focuses on the statewise carbon emissions (CO2, CO and CH4), using region specific emission factors and statewise carbon sequestration capacity. The estimate shows that CO2, CO and CH4 emissions from India are 965.9, 22.5 and 16.9Tg per year, respectively. Electricity generation contributes 35.5% of total CO2 emission, which is followed by the contribution from transport. Vehicular transport exclusively contributes 25.5% of total emission. The analysis shows that Maharashtra emits higher CO2, followed by Andhra Pradesh, Uttar Pradesh, Gujarat, Tamil Nadu and West Bengal. The carbon status, which is the ratio of annual carbon storage against carbon emission, for each federal state is computed. This shows that small states and union territories (UT) like Arunachal Pradesh, Mizoram and Andaman and Nicobar Islands, where carbon sequestration is higher due to good vegetation cover, have carbon status >1. Annually, 7.35% of total carbon emissions get stored either in forest biomass or soil, out of which 34% is in Arunachal Pradesh, Madhya Pradesh, Chhattisgarh and Orissa. [Copyright &y& Elsevier]

Abstract: Attractive economic performance of energy systems is important for their long term sustainability. In this paper, a cost benefit analysis (CBA), standard thermoeconomic analysis, and a new method that combines the two was applied to seven modelled candidate decentralised energy systems for small Indian rural villages. By including elements of CBA in standard thermoeconomics, economic inefficiencies at the component level and revenue adjusted costs of exergy for each stream were ascertained. The analysed systems all produced household and irrigation electricity as well as a secondary product or service, which in some cases utilised waste heat from the electricity generation process. The system that produced distilled water as a secondary product was the most economically sustainable out of those modelled. While the standard thermoeconomic electricity cost remained around 0.5 USD/kWh for all analysed systems, the benefit to cost ratios varied from 0.29 to 0.97, demonstrating differing appeal to outside investment. By incorporating CBA into standard thermoeconomics the accounted revenue produced a larger spread in exergetic costs than standard thermoeconomics (for example, an electricity cost range of 0.217–0.507 USD/kWh), thus providing a better comparison of systems with different energy end uses. [Copyright &y& Elsevier]

Abstract: Jammu and Kashmir the northern most state of India is blessed with immense potential for utilization of renewable energy. The state at present is fairly untapped in terms of energy utilization and thus venturing into this region would definitely prove to be profitable. The natural energy sources like sunshine, wind, vegetation, water flow, biomass and other biological wastes though abundantly available in the state yet are not being potentially harnessed resulting in very low per capita energy availability, deforestation and poor health. Renewable energy acquires a promising option not only for energy availability next view and of environment protection but also the socio-economic conditions of the people residing in these areas can be improved to a great extent. The hydroelectric power has tremendous potential for generation of electricity in the state because the topography of the state provides extensive network of canals and streams. This paper describes the resource potential and opportunity to enter the market and bring more renewable energy projects in the form of solar, biomass derived fuels, biogas and hydroelectric in the state. [Copyright &y& Elsevier]

The clean development mechanism (CDM) could play an important role in the power generation sector of developing countries and emerging economies by providing additional revenue to support the diffusion of renewable energy sources (RES). This paper investigates the contribution of the CDM to deployment of renewable electricity projects in China and India, and highlights the main potentialities and limitations of this mechanism for their support. The outcome of our analysis shows many differences and similarities in the way and scale of CDM projects for renewable electricity generation have been implemented in the two countries. In both cases, the CDM has made a contribution to greening investments in the power generation sector, which is still largely dominated by subcritical coal-fuelled power plants. Nonetheless, some major problems still remain and they are mainly related to the distribution of projects across different technologies and to the environmental integrity of the mechanism. In view of the likely revision of the CDM in the post-Kyoto period, we find that the differentiation of the credit generation rate of different project categories could bring some level of improvement without significantly altering the current system functionality. [ABSTRACT FROM AUTHOR]

Abstract: Spatial assessments of crop residue biomass and its power potential at village level in Sonitpur district of Assam, India is presented in this paper. Recent IRS P6 LISS-III remote sensing data of the study area is analyzed in GIS environment to map crop areas and subsequently residue biomass availability at village level. Altogether 16 different types of crop residues are identified in the district with rice crop as dominant residue. About 0.17 million tonnes of crop residue biomass, having about 17MW potential power, is spatially distributed in the rural areas of the district. Village level biomass power mapping is done assuming combustion route of decentralized power generation. Considering the acute shortage of grid connected power supply in the study area, the decentralized crop residue based power generation could be an attractive option. At individual level, thermal power plant up to 72kW could be possible to cater the essential power need of the villager. [Copyright &y& Elsevier]

Abstract: Grid integration is one of the major concerns in recent years as wind power generation level keeps on increasing continuously in the power system. Therefore, wind farms will have a significant influence on the operation and control of emerging power system, which is expanding in terms of interconnections, network capacity, load demand and addition of new devices for improving the performance of the system. New grid codes are being set up in several countries by specifying the relevant requirements for efficient, stable and secure operation of power system and these specifications have to be met in order to integrate wind power into the modern electric grid. Several states of India have high penetration of wind power and specific grid connection requirements (GCR) for wind power are yet to be established. This paper proposes GCR for wind power integration in India and discusses several technical and operational issues arising due to high penetration of wind power generation in Indian power systems. [Copyright &y& Elsevier]

Abstract: Rural electrification is an integral component of poverty alleviation and rural growth of a nation. In India, electricity has not played effective role in the socio-economic growth of village. Gross Domestic Product (GDP) is increasing with 8% where as contribution of agriculture sector is 1.9%. Government of India has ambitious target of providing electricity to all villages by 2008 and all rural households by 2012. Steps are already initiated with Rural Electric Corporation, Rural Electricity Supply Technology mission, State Electricity Boards, Reforms in Power sector. An attempt has been made in this paper to assess the features of rural electrification in India and the feasibility of Photovoltaic Solar Home Systems (PV SHS). [Copyright &y& Elsevier]

Abstract: Energy plays significant role in the development of a nation. The conventional sources, though exhausting and not environment friendly are being increasingly used. Looking at limited supplies and various environment problems associated with its uses, renewable energy sources are getting attention. Municipal solid waste [MSW] is getting importance in recent years. Having fewer disposal problems is being considered as valuable bio-energy resources. The MSW management involves collection, transportation, handling and conversion to energy by biological and thermal routes. The present paper reports the results of physical, proximate and TGA/DTA analysis, used to select the most appropriate method of energy conversion. Based on the energy potential available, the feasibility of energy conversion through biogas production using available waste has been carried out. The CDM benefits have also been considered. The cost of generation with and without CDM benefits is Rs. 1.36/- and Rs. 1.41/- per kWh respectively as compared to cost of energy from grid [Rs. 3.50/- per kWh]. Therefore power generation from MSW of Haridwar city using biomethanation conversion technology is feasible. [Copyright &y& Elsevier]

Abstract: This paper presents the modeling and analysis of a greenhouse-integrated power system consisting of solar photovoltaic panels, electrolyzer bank and Polymer Electrolyte Membrane (PEM) fuel cell stacks. Electric power is generated in an array of solar photovoltaic modules. Excess energy after meeting the requirements of the greenhouse during peak sunshine hours, is supplied to an electrolyzer bank to generate hydrogen gas, which is consumed by the PEM fuel cell stack to support the power requirement during the energy deficit hours. The predicted performance of the integrated system is presented for different climatic conditions, for a given location (Kolkata) in the Indian subcontinent. The study reveals that 51 solar photovoltaic modules each of 75W p along with a 3.3kW electrolyzer and 2 PEM fuel cell stacks, each of 480W, can support the energy requirement of a 90m2 floriculture greenhouse with fan-pad ventilated system. The study shows that this integrated power system provides a viable option for powering stand-alone greenhouses in a self-sustained manner. [ABSTRACT FROM AUTHOR]

NTPC Ltd. of India is presently constructing the 520 MW (4 x 30 MW) Tapovan-Vishnugad hydroelectric power plant in Uttarakhand in the Himalayas. As part of this project, an approximately 12.1 km head race tunnel (HRT) is to be constructed, of which approximately 8.6 km are being excavated by DS-TBM with an excavation diameter of 6.575 m. Construction of this HRT has been awarded to a Joint Venture (JV) of Larsen, Toubro Ltd., India, and Alpine, Austria. Geoconsult ZT GmbH is acting as a Consultant to NTPC Ltd. for the TBM part of the HRT. The overburden above the tunnel is up to 1, 100 m with the result that knowledge of the geology along the HRT alignment could only be based on projections made from surface exposures available in the area. Basically, the ground consists of jointed quartzite, gneiss and schist. Excavation of the HRT started in October 2008 and excavation rates of over 500 m per month were achieved in November 2009. However, in December 2009 the TBM encountered a fault zone along with high-pressure water inflow and became trapped. This paper outlines the present status of HRT construction and describes in particular the difficulties encountered during TBM excavation in fault zones with large high-pressure water inflows and how these problems are being dealt with. Die indische Firma NTPC Ltd. errichtet derzeit das 520 MW (4 x 130 MW) Tapovan-Vishnugad Wasserkraftwerk in Uttarakhand, Himalaya. Als Teil dieses Projekts wird ein ungefähr 12,1 km langer Triebwasserstollen (TWS) errichtet, wobei rund 8,6 km davon mittels einer DS-TBM mit einem Ausbruchdurchmesser von 6.575 m aufgefahren werden. Der Bau dieses Triebwasserstollens wurde an die Arbeitsgemeinschaft Larsen, Toubro Ltd., Indien, und Alpine, Österreich vergeben. Geoconsult ZT GmbH fungiert als Berater von NTPC Ltd. für den TBM-Teil des TWS. Aufgrund der Überlagerung des Tunnels von bis zu 1,100 m konnte die Geologie entlang des Triebwasserstollens nur durch Projektion von vorhandenen Oberflächenaufschlüssen aus der Umgebung bestimmt werden. Das Gebirge besteht hauptsächlich aus geklüftetem Quarzit, Gneis und Schiefer. Der Ausbruch des TWS begann im Oktober 2008. Im November 2009 wurde eine Vortriebsgeschwindigkeit von über 500 m pro Monat erreicht. Im Dezember 2009 jedoch fuhr die TBM eine Störzone mit einem Hochdruckwassereinbruch an, wodurch die TBM stecken blieb. Dieser Artikel skizziert den derzeitigen Stand des TWS und legt besonderes Augenmerk auf die Schwierigkeiten beim Auffahren der Störzone inklusive Hochdruckwassereinbruch mit einer TBM. Darüber hinaus wird gezeigt, wie sich die auftretenden Probleme lösen lassen. [ABSTRACT FROM AUTHOR]

The hydrological interdependence of plants in cascaded hydroelectric system means that operation of any plant has an effect on water levels and storage at other plants in the system. Hydro-logically efficient operation of power plants in such cascaded system requires that water resources should be managed efficiently, so that it can dispatched to predicted demand considering all physical and operational constraints. Meta-heuristic optimization techniques particularly Particle Swarm Optimization (PSO) and its variants have been successfully used to solve such problem. In this paper Time Varying Acceleration coefficients PSO (TVAC_PSO) has been used to determine the optimal generation schedule of real operated cascaded hydroelectric system located at Narmada river in state Madhya Pradesh, India. Results thus obtained from TVAC_PSO are compared with Novel Self Adaptive Inertia Weight PSO (NSAIW_PSO) and found to give better solution. [ABSTRACT FROM AUTHOR]

Abstract: This article attempts to highlight the technical and economical issues related to decentralized power generation in India using biomass gasification. Biomass-based energy has several distinct advantages such as wide availability and uniform distribution that puts it ahead among the renewable energy options for India. The estimated potential of power generation through renewable sources in India is 85GW with biomass power contributing approximately 20GW. Especially, in the remote areas and hilly terrains of India, biomass gasification-based power generation offers a highly viable solution for meeting energy demands of small villages and hamlets, which would not only make them independent but will also reduce burden on state electricity boards. This paper reviews various technical options for biomass gasification-based low-, medium- and large-scale power generation. We essentially discuss the merits and demerits (operational and other problems) of different systems. Further, we also deal with economics of these systems and discuss principal factors influencing the viability of the biomass-based power generation. Finally, we review some case studies of biomass-based power generation for meeting energy needs, both thermal and electrical. [Copyright &y& Elsevier]

Abstract: In this paper, energy metrics (energy pay back time, electricity production factor and life cycle conversion efficiency) of hybrid photovoltaic (PV) modules have been analyzed and presented for the composite climate of New Delhi, India. For this purpose, it is necessary to calculate (1) the energy consumption in making different components of the PV modules and (2) the annual energy (electrical and thermal) available from the hybrid-PV modules. A set of mathematical relations have been reformulated for computation of the energy metrics. The manufacturing energy, material production energy, energy use and distribution energy of the system have been taken into account, to determine the embodied energy for the hybrid-PV modules. The embodied energy and annual energy outputs have been used for evaluation of the energy metrics. For hybrid PV module, it has been observed that the EPBT gets significantly reduced by taking into account the increase in annual energy availability of the thermal energy in addition to the electrical energy. The values of EPF and LCCE of hybrid PV module become higher as expected. [Copyright &y& Elsevier]

This paper presents an effective method of congestion management in power systems. Congestions or overloads in transmission network are alleviated by generation rescheduling and/or load shedding of participating generators and loads. The two conflicting objectives 1) alleviation of overload and 2) minimization of cost of operation are optimized to provide pareto-optimal solutions. A multiobjective particle swarm optimization (MOPSO) method is used to solve this complex nonlinear optimization problem. A realistic frequency and voltage dependent load flow method which considers the voltage and frequency dependence of loads and generator regulation characteristics is used to solve this problem. The proposed algorithm is tested on IEEE 30-bus system, IEEE 118-bus system, and Northern Region Electricity Board, India (NREB) 390-bus system with smooth as well as nonsmooth cost functions due to valve point loading effect. [ABSTRACT FROM AUTHOR]

To redress the problem of poor electricity access in rural India, even after 50 years of sustained electrification effort has proved to be a challenging task. And in order to address this problem, India launched a massive rural electrification programme in April 2005 with an objective of achieving universal household electrification by 2012. This short paper discusses the issues facing this programme and suggests that unless the risks are carefully mitigated, the programme may not succeed in achieving its principal objectives. [ABSTRACT FROM AUTHOR]