Search

A novel method is proposed for increasing the giant magnetoresistance (GMR) of dual spin valves of the CoFe/Cu/CoFe/Cu/CoFe type by inserting nano-oxide layers (NOLs) into the pinned layers. Using this method, MR ratio of 23.5% was obtained, a value equal to those of specular spin valves with antiferromagnetic oxide, e.g., NiO. This method allows the selection of metallic materials for the antiferromagnetic layer. In addition, we obtained the specularity factor of upper NOLs, 0.8, and that of lower NOLs, 0.7, by calculating Boltzmann equations taking into account the roughness of each interlayer. This model shows that the MR ratio would be 27.5% for dual spin valves with ideal NOLs. [Copyright &y& Elsevier]

We investigated current-perpendicular-to-plane (CPP) magnetotransport parameters of FexCo100-x/ Ag interfaces: interface specific resistance (ARF/N), extended interface resistance (AR* F/N), and spin scattering asymmetry (γ). We also investigated the dependence of interfacial parameters on the giant magnetoresistance effect with CPP geometry. For measuring these parameters, we prepared magnetic multilayers and pseudo spin valves (PSVs), combining the ferromagnetic (F) alloys Fe, Co, Fe50Co50, and Fe30Co70 with the nonmagnetic (N) metal Ag. In all cases, the largest ARF/N value was found to be ~0.68 mΩμm² with an enhanced AR* F/N value of ~1.9 mΩμm² for a (001)-oriented Fe/Ag interface, which suggests that spin-up and spin-down electrons on the Fermi surface have very different transmission probabilities. Such an interface can act as a spin filter through which only one type of electrons can pass. [ABSTRACT FROM AUTHOR]

The current-perpendicular-to-plane (CPP) giant-magnetoresistance (GMR) of spin valves with Fe50Co50 alloy was investigated. It has been reported that the Cu inserted in Fe50Co50 is effective for enhancing CPP-GMR. In this paper, we investigated the number of Cu lamination effect on CPP-GMR and clarified that higher CPP-GMR is obtained by decreasing the number of Cu layers. In order to ascertain the reason for this tendency, the crystalline structure and magnetization were examined. As a result, it was found that the d spacing of Fe50Co50 increases when the number of Cu layers is increased, although saturation magnetization does not change. [ABSTRACT FROM AUTHOR]

To understand the mechanism of current-confined-path formation for the current-perpendicular-to-plane type of giant magnetoresistive devices, we have investigated the evolution of an Al monolayer on the Cu (111) surface both by in situ scanning tunneling microscopy and by molecular dynamics simulation. Ultrathin Al nano-clusters were formed on the plateaus and step (or plateau) edges of the Cu surface in the as-deposited state. Upon annealing at 300 °C, Al atoms migrated toward the step edges by surface diffusion. As a consequence, nanometer-sized Cu channels not covered by Al clusters can be formed. These channels could serve as current-confined paths if subsequent mild Al oxidation is provided. [ABSTRACT FROM AUTHOR]

Using current-perpendicular-to-plane (CPP) giant magnetoresistance (GMR) measurement, we have evaluated the bulk and interface spin scattering asymmetric coefficients, βF and γF/N and the specific interfacial resistance, AR*F/N, for exchange-biased spin-valves consisting of artificially ordered B2 structure Fe50Co50 and Ag spacer layer. Artificially epitaxial ordered Fe50Co50 superlattices have been successfully fabricated on MgO (001) substrate by alternate monatomic layer (AML) deposition at a substrate temperature of 75 °C. The structural properties of the full epitaxial trilayer, AML[Fe/Co]n/Ag/AML[Fe/Co]n, on the Ag electrode have been confirmed by in situ reflection high-energy electron diffraction and transmission electron diffraction microscopy. A considerably large resistance-area product change and MR ratio (ΔRA > 3 mΩμm2 and MR ratio ∼5%) were confirmed even at thin AML[Fe/Co]n layer at room temperature (RT) in our spin-valve elements. The estimated values of βF and γF/N were 0.80 and 0.84 ± 0.02, respectively, from the Valet-Fert theory analysis of ΔRA as a function of thickness of the ferromagnetic layer (3, 4, and 5 nm) on the basis of the two-current model. [ABSTRACT FROM AUTHOR]