Search

Paleo-pressure reconstruction in sedimentary basins is one of the most important aspects of hydrocarbon accumulation research. In view of the advantages and disadvantages of the current methods for paleo-pressure research, a new method to reconstruct the paleo-pressure is presented in this paper. According to the geological background, quantitative analyses of the factors that might control overpressure were first conducted to clarify the contributions of each mechanism during different geological periods. Pressure evolution was reconstructed by fluid-compaction modelling with constraints imposed by the paleo-pressures obtained from fluid inclusions or differential stress methods. Determining the mechanisms responsible for overpressures during geological history is the basic prerequisite for paleo-pressure research. Thus, quantitative studies were conducted of the contributions of disequilibrium compaction, gas charging, oil cracking, temperature reduction, and tectonic uplift and subsidence to overpressures. Three case studies of paleo-pressure reconstruction were performed for the Sinian strata in the Sichuan Basin, Ordovician strata in the north uplift in the Tarim Basin and the Permian strata in the Sulige Gas Field in the Ordos Basin, where these three study sites are normally pressured, weakly over-pressured and abnormally low pressured at present, respectively. The new method developed in this paper is very important for the practical reconstruction of the paleo-pressure in marine strata and ancient strata in deep basins. [ABSTRACT FROM AUTHOR]

The Sichuan Basin is overpressured and has experienced a reduction in temperature since the Late Cretaceous due to uplift and denudation. The temperature and pressure of the central Sichuan Basin are investigated utilising borehole data. Pressure positively correlates with temperature in each overpressured system, with a coefficient of 0.851 MPa/°C for the Cambrian pressure system and 1.064 MPa/°C for the Upper Triassic pressure system. Physical simulation experiments carried out with absolute sealing conditions demonstrate that the temperature–pressure relationship in a water-filled system is linear with a gradient of 1.076 MPa/°C, similar to the observed temperature–pressure gradients in the study area. The integration of thermal indicators, including vitrinite reflectance and fluid inclusions, is used to reconstruct the palaeotemperature of the basin. Formation temperatures have decreased since 90 Ma, with a significant decrease since 20 Ma. The amount of cooling varies between hydrocarbon fields as it is dependent on the local extent of exhumation during basin uplift. The Weiyuan field exhibits the greatest amount of cooling, followed by the Moxi field, with the Bajiaochang field experiencing the smallest reduction in temperature. The maximum palaeopressure is calculated to be > 200 MPa in the Cambrian strata and ∼150 MPa in the Upper Triassic strata. The existence of gas within the hydrocarbon fields can change the temperature–pressure relationship, lowering the maximum pressure. However, we propose that temperature reduction is the primary cause of the pressure decrease since 90 Ma and that it controls the present-day overpressure distribution in the basin. [ABSTRACT FROM AUTHOR]

Reconstructing the evolution of paleofluid pressure in carbonate reservoirs is a challenging problem, particularly when no oil-bearing fluid inclusions are available to provide barometric constraints on the fluid system. To recover the paleofluid pressure in the Sinian Dengying Formation (Z 2 dn) and the Cambrian Longwangmiao Formation (Є 1 l) of the central paleo-uplift of the Sichuan Basin, we conducted a comprehensive analysis combining the inclusion pressure-volume-temperature simulation, inclusions in situ Raman shifts, and basin modeling. The results showed that the evolution of the pore pressure could be divided into four stages. Prior to the end of the late Triassic, the whole central paleo-uplift was in a normal pressure state. During the Jurassic, a moderate overpressure prevailed in the dolomitic reservoirs of the Gaoshiti-Moxi area and decreased in the adjacent units. At the end of the early Cretaceous, the overpressure reached a maximum in the whole region and was strongest in the Longnüsi area, decreasing to the west. From the late Cretaceous to the present day, the central area of the basin has uplifted rapidly with the overpressure significantly decreasing. Z 2 dn has been restored to normal pressure during the Neogene, while Є 1 l remains moderately overpressurized. Based on an analysis of the structural background and preservation conditions, the types of sedimentary facies, the preservation condition of the traps, and the differential weathering process are the primary reasons for the different pressure states in Z 2 dn and Є 1 l during the last stages. [ABSTRACT FROM AUTHOR]

Recently, trillions of cubic meters gas resources have been found in Sinian reservoirs of Gaoshiti-Moxi region in the central uplift of Sichuan Basin, which is the first commercial discovery of primary gas field in Precambrian anywhere in the world. To obtain a great breakthrough in Precambrian hydrocarbon exploration, it is necessary to find out the evolution process of temperature and pressure. Reconstructing the thermal history and pore pressure evolution in carbonate reservoirs are challenging problems, especially in deep-old layers without available samples and methods. To study the temperature and pressure system, we conducted a comprehensive analysis combining the paleo-thermal indicators and inclusions Pressure-Volume-Temperature (PVT) simulation with basin modeling. The results showed that the thermal history of the Gaoshiti-Moxi area could be divided into three stages. From the Late Sinian to Late Paleozoic, the thermal regime was stable with low heat flow value (<65 mW/m 2 ). During the Early Paleozoic, the heat flow increased rapidly to the peak value (75–100 mW/m 2 ). From Mesozoic to present, the thermal subsidence occurred in the basin with the heat flow decreasing to the present value (60–70 mW/m 2 ). With the boundary condition of above thermal history, the simulated pressure of Dengying Formation in Gaoshiti-Moxi area could be divided into four stages. The excess pressure began to form during the Triassic. From the end of Triassic to Middle Jurassic, the excess pressure increased steadily and slowly. From Middle Jurassic to the end of Early Cretaceous, the strata subsided rapidly while the excess pressure increased significantly. Since the Late Cretaceous, the Dengying Formation suffered from rapid uplifting and gas lateral migrating with the excess pressure decreasing, until the Late Neogene, the excess pressure in reservoirs declined to zero. [ABSTRACT FROM AUTHOR]