Search

The multiphase flow behavior in shale porous media is known to be affected by multiscale pore size, dual surface wettability, and nanoscale transport mechanisms. However, it has not been fully understood so far. In this study, fractal model of gas–water relative permeabilities (RP) in dual-wettability shale porous media for both injected water spontaneous imbibition and the flow back process are proposed using fractal geometry. The shale pore structure is described as tortuous with different pore sizes and morphologies including slit pore, equilateral triangle, circular pore and square pore. The proportion of each pore morphology can be obtained from SEM/FIB-SEM pore structure characterization results. Injected water spontaneous imbibition after hydraulic fracturing is modeled as the capillary force dominated process and injected water flow back is modeled as a non-wetting gas phase drainage process in inorganic matter. The organic pores are deemed to be not accessible by injected water. The boundary slip of water and free gas flow in the inorganic matrix are considered while both free gas flow and adsorbed gas flow are modeled in organic matter. The proposed gas–water RP fractal model is verified via comparisons with the available experimental data and is discussed in detail. Study results reveal that gas phase RP increases with increasing pore fractal dimensions and tortuosity fractal dimensions, whereas it decreases with increasing Total Organic Carbon (TOC) volumes. Water phase RP decreases with increasing of pore fractal dimensions and tortuosity fractal dimensions, whereas it increases with increasing TOC volumes. [ABSTRACT FROM AUTHOR]

As an effective approach to evaluate shale gas production, macroscale numerical simulations have been conducted; however, multiscale storage space and complex gas–water two-phase transport mechanisms are not systematically considered. To deal with this, a rigorous cross-scale gas–water two-phase transport simulation method that considers the pore, core, and field scale is proposed herein. First, to investigate the fluid storage state in different pore types during the gas–water two-phase transport process, a shale pore network gas–water transport simulation is conducted. Subsequently, a core-scale model that considers the distribution of organic matter is constructed, and the gas–water two-phase transport behaviors are upscaled from the pore to the core by incorporating nanomicroscale effects. Next, a shale gas–water two-phase macroscale numerical simulation is implemented based on the core-scale simulation results. Multiple interacting continua are used to describe the shale matrix and microfractures, whereas the embedded discrete fracture method is employed to represent hydraulic fractures. Finally, the manner by which nanomicroscale effects, stress sensitivity, and SRV area affect the production of shale gas reservoirs is discussed comprehensively. This study provides a practical method to estimate shale gas production by rigorously considering gas–water nanomicroscale effects to reduce uncertainties during productivity evaluation. [ABSTRACT FROM AUTHOR]

The multiphase flow processes during water injection and flowback in shales are largely affected by its multiscale pore structure, different pore types and complex fluid transport mechanisms. At present, it is difficult to measure shale multiphase flow properties in laboratory. This study presents an upscaling model to derive core-scale relative permeability from pore-scale multiphase simulation using organic matter (OM)/inorganic matter (IOM) pore network models. Gas and water absolute permeabilities on OM/IOM pore network models are determined, and gas-water two-phase imbibition (during water injection) and drainage (during flowback) processes in the IOM pore network model are conducted using the invasion percolation theory. A core-scale model is generated with stochastically distributed IOM/OM patches. The upscaled relative permeabilities are derived by assembling gas-water transport properties in the IOM/OM based on the corresponding pore network simulation results. The upscaling method is validated by comparison with an analytical model during water injection and flowback processes. Furthermore, the impacts of total organic carbon (TOC) content and intrinsic permeability ratio of OM to IOM on the upscaled relative permeabilities are analyzed. The critical TOC content and intrinsic permeability ratio at which OM influences the upscaled relative permeabilities are determined. This study provides an effective upscaling workflow to obtain core-scale gas-water relative permeabilities based on pore-scale modeling considering multiple gas/water transport mechanisms in different pore systems. • Relative permeabilities upscaling model is built with multiple transport mechanisms. • Upscaled relative permeabilities largely rely on multiphase flow properties in IOM. • The impact of OM on upscaled relative permeabilities can be ignored at TOC <4%. • Intrinsic permeability ratio (γ) of OM to IOM is in effect at γ < 0.3. [ABSTRACT FROM AUTHOR]

Nonuniform proppant distribution is fairly common in hydraulic fractures, and different closure behaviors of the propped and unpropped fractures have been observed in lots of physical experiments. However, the modeling of partially propped fracture closure is rarely performed, and its effect on gas production is not well understood as a result of previous studies. In this paper, a fully coupled fluid flow and geomechanics model is developed to simulate partially propped fracture closure, and to examine its effect on gas production in fractured shale reservoirs. Specifically, an efficient hybrid model, which consists of a single porosity model, a multiple porosity model and the embedded discrete fracture model (EDFM), is adopted to model the hydro-mechanical coupling process in fractured shale reservoirs. In flow equations, the Klinkenberg effect is considered in gas apparent permeability, and adsorption/desorption is treated as an additional source term. In the geomechanical domain, the closure behaviors of propped and unpropped fractures are described through two different constitutive models. Then, a stabilized extended finite element method (XFEM) iterative formulation, which is based on the polynomial pressure projection (PPP) technique, is developed to simulate a partially propped fracture closure with the consideration of displacement discontinuity at the fracture interfaces. After that, the sequential implicit method is applied to solve the coupled problem, in which the finite volume method (FVM) and stabilized XFEM are applied to discretize the flow and geomechanics equations, respectively. Finally, the proposed method is validated through some numerical examples, and then it is further used to study the effect of partially propped fracture closures on gas production in 3D fractured shale reservoir simulation models. This work will contribute to a better understanding of the dynamic behaviors of fractured shale reservoirs during gas production, and will provide more realistic production forecasts. [ABSTRACT FROM AUTHOR]