Search

This work studies the use of Cu/Co‐MOFs for the removal of doxycycline hydrochloride (DOC) in wastewater. Cu/Co‐MOFs were prepared using a solvothermal method and characterized by XRD, SEM, and TG. According to the experimental results, the maximum DOC adsorption capacity of Cu/Co‐MOFs within 5 h was 268.5 mg/g. The pseudo‐second‐order (PSO) kinetic model shows that the R2 are all greater than 0.99, which proves that the theory DOC adsorption by Cu/Co‐MOFs is consistent with practice. According to the Freundlich isotherm model, the adsorption of DOC by Cu/Co‐MOFs is a multilayer adsorption. Thus, the results show that Cu/Co‐MOFs have practical application value in removing DOC. [ABSTRACT FROM AUTHOR]

Fe-MOFs were prepared using a solvothermal method, and were characterized by scanning electron microscopy. We explored the application of Fe-MOFs as an adsorbing material for the removal of Rhodamine B (RhB) from aqueous solutions. The experimental data were simulated by dynamics and the results showed that the pseudo–second-order kinetics model was appropriate for analysis of RhB removal. We studied the adsorption capacity of MOF materials under different masses, concentrations, and pH conditions. When the pH was 6, the maximum adsorption capacity within 4 h was 135 mg/g. In summation, the removal of RhB from wastewater using MOFs is feasible, inexpensive, and effective. Hence, our findings indicate that MOFs have a broad application in the purification of wastewater. [ABSTRACT FROM AUTHOR]

This work studies the use of Fe/Ni-MOFs for the removal of ciprofloxacin (CIP) in wastewater. Fe/Ni-MOFs are prepared by the solvothermal method and characterized by X-ray diffraction (XRD), a scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), and a thermal gravimetric analyzer (TG). Under the conditions of the concentration of 50 ppm, a mass of 30 mg, and a temperature of 30 °C, the maximum adsorption capacity of ciprofloxacin removal within 5 h was 232.1 mg/g. The maximum removal rate was 94.8% when 40 mg of the Fe/Ni-MOFs was added to the solution of 10 ppm ciprofloxacin. According to the pseudo-second-order (PSO) kinetic model, the R2 values were all greater than 0.99, which proved that the adsorption theory of ciprofloxacin by Fe/Ni-MOFs was consistent with the practice. The adsorption results were mainly affected by solution pH and static electricity, as well as other factors. The Freundlich isotherm model characterized the adsorption of ciprofloxacin by Fe/Ni-MOFs as multilayer adsorption. The above results indicated that Fe/Ni-MOFs were effective in the practical application of ciprofloxacin removal. [ABSTRACT FROM AUTHOR]