Search

This study deals with a new approach to tackle the challenges encountered in the filters-based reactive power calculation techniques utilized in the control system of static VAr compensators. In this approach, step and time-varying responses are improved by a combination of differential and filter-based methods. Then, optimum values of the main parameters of the low-pass and band-stop filters are determined considering three criteria: accuracy, speed, and capability for following the time-varying loads. To assess the performance of the proposed method, a new objective function is introduced, calculated for two sets of signals, captured from a real field in Mobarakeh Steel Company in Isfahan/Iran. Then, the proposed and the other reactive power calculation methods are assessed in practice and simulation. Also, the algorithm is implemented using a TMDSCNCD28335 as the processor to assess the real-time feasibility of the method. To do so, the reactive power variation of an electrical arc furnace is emulated in a prototype test bench and the algorithm is run in real-time by the processor during the system operation. [ABSTRACT FROM AUTHOR]

Fast reactive power variation in wind farms creates flicker. Static VAR compensators (SVCs) are the most commonly used devices for flicker mitigation. The reactive power calculation unit is the main component in the control system of SVCs. This article deals with two new approaches for reactive power calculation. In both methods, the main parameters of a filter-based technique are optimized using a novel optimization approach. The first method has a non monotonic step response which is converted to a desirable monotonic response by the second method. This results in a better response to a time-varying reactive power. The problem formulation and definition of a new objective function are presented. A data pool is gathered from Manjil wind farm, Iran, for different conditions. This data pool is used in the objective function to derive the optimal setting. The performance of the proposed methods is assessed using this dataset and is compared with other techniques. Also, real-time implementation of the algorithm is evaluated using TMDSCNCD28335 as the processor. To do so, the reactive power variation in a wind generation unit is emulated in a prototype test bench and the algorithm is run in real-time by the processor during the system operation. [ABSTRACT FROM AUTHOR]