Search

Simultaneously achieving improvements in power conversion efficiency (PCE) and stability is the main task of the current development stage of organic solar cells (OSCs). This work reports a symmetry–asymmetry dual‐acceptor (SADA) strategy to construct ternary devices, which is found to be feasible for increasing both the PCE and the operational lifetime of OSCs. In this contribution, the symmetric acceptor L8‐BO and the asymmetric acceptor BTP‐S9 are blended in equal proportions with polymer donor PM6 for the consideration of absorption spectrum complementarity and cascade energetic alignment. In addition, the features of crystallinity and miscibility of the dual‐acceptor deliver optimized morphology lead to a high PCE of 18.84%. In addition, the asymmetric acceptor BTP‐S9 with a larger dipole moment shows tighter molecular stacking and longer crystal correlation length, which favor intrinsic molecular photostability, and further consolidate the operational lifetime of OSCs when coordinated with L8‐BO. This work demonstrates the efficacy of the SADA strategy for constructing efficient and stable OSCs. [ABSTRACT FROM AUTHOR]

The ternary strategy has proven to be an effective method for improving the efficiency of organic solar cells (OSCs). However, designing and selecting the third component still pose challenges. In this study, this issue is addressed by focusing on the PBDB‐T:Y18‐F binary system and introducing a new, strong luminescent, asymmetric small‐molecule acceptor (SMA) called L8‐CBIC‐Cl, which shares a similar skeleton with Y18‐F. The similarity in molecular framework facilitates good compatibility between the two acceptors, resulting in the formation of an alloy‐like acceptor phase. Furthermore, the norbornenyl‐modified end group in L8‐CBIC‐Cl contributes to its strong luminescent properties, which in turn leads to a low non‐radiative energy loss and a high open‐circuit voltage. Consequently, the PBDB‐T:L8‐CBIC‐Cl:Y18‐F based ternary devices realize a high power conversion efficiency (PCE) up to 17.01%, which is higher than PBDB‐T:Y18‐F device (14.49%). Importantly, L8‐CBIC‐Cl exhibits a good universality as a guest acceptor in other three binary systems (D18:Y6, D18:BTP‐eC9‐4F, and D18:L8‐BO). The D18:L8‐BO:L8‐CBIC‐Cl device shows an impressive efficiency of 19%. The work demonstrates that employing SMA with a high PLQY and better miscibility with host acceptor as the third component has a great potential for developing high‐efficiency ternary OSCs. [ABSTRACT FROM AUTHOR]

[Display omitted] • Investigations on non-fused-ring acceptors with progressive evolutions. • Counterbalance between high photo-response and low energy loss. • J52:O-PC-EH-based device achieved a best efficiency of 14.43% (certified: 14.1%). Resolving competitive counterbalance between high external quantum efficiency (EQE) response and low energy loss is critical for achieving efficient organic solar cells (OSCs), including those based on low-cost non-fused-ring electron acceptor (NFREA). In this work, we performed a comparable study by utilizing four NFREAs with progressive evolutions in molecular structures, energetic levels, spectral coverages, crystallinity, etc, to pair with polymer donor J52. By regulating the terminal and side chains of NFREAs, the enhanced intramolecular charge transfer (ICT) effect allows O-PC-EH possessing the broader spectral coverage for higher photocurrent, the reduced energetic offset enables O-PC-EH-based device owning higher luminescence property for lower energy loss, the strengthened crystallinity endows O-PC-EH-based blend better charge transport property for less charge recombination. With those comprehensive managements from molecule to blend properties, the J52:O-PC-EH-based OSCs achieved the best efficiency of 14.4% (certified: 14.1%) with benefits in all the three device parameters. This work reveals the importance of fine-tuning molecular structures of NFREAs according to paired polymer donor for maximizing the device performances. [ABSTRACT FROM AUTHOR]

Here, a near‐infrared (NIR)‐absorbing small‐molecule acceptor (SMA) Y‐SeNF with strong intermolecular interaction and crystallinity is developed by combining selenophene‐fused core with naphthalene‐containing end‐group, and then as a custom‐tailor guest acceptor is incorporated into the binary PM6:L8‐BO host system. Y‐SeNF shows a 65 nm red‐shifted absorption compared to L8‐BO. Thanks to the strong crystallinity and intermolecular interaction of Y‐SeNF, the morphology of PM6:L8‐BO:Y‐SeNF can be precisely regulated by introducing Y‐SeNF, achieving improved charge‐transporting and suppressed non‐radiative energy loss. Consequently, ternary polymer solar cells (PSCs) offer an impressive device efficiency of 19.28% with both high photovoltage (0.873 V) and photocurrent (27.88 mA cm−2), which is one of the highest efficiencies in reported single‐junction PSCs. Notably, ternary PSC has excellent stability under maximum‐power‐point tracking for even over 200 h, which is better than its parental binary devices. The study provides a novel strategy to construct NIR‐absorbing SMA for efficient and stable PSCs toward practical applications. [ABSTRACT FROM AUTHOR]

Research has shown that ternary strategy is an effective tool for improving the performance of organic solar cells (OSCs) and simple-structured small molecules with low-cost and wide bandgap which broadens the scope of the choice in third components recently attracted the attention of researchers. Herein, a small molecule with benzo[1,2-b:4,5-b']dithiophene (BDT) core named BR-C12 which mixed well with PM6 has been designed and synthesized. Incorporating BR-C12 as third component into PM6:Y6, BR-C12 exhibits a complementary absorption with PM6 and Y6, promoted exciton dissociation and charge collection, reduced bimolecular recombination, resulting in more ordered molecular packing. The PM6:Y6:BR-C12 (1:1.2:0.1, weight ratio) OSC shows an improved power conversion efficiency (PCE) of 17.02% in comparison to host binary devises (16.42%). In addition, by employing BR-C12 as third component into PM6:L8-BO, the ternary device based on PM6:L8-BO:BR-C12 also achieves significant enhancement in device photovoltaic performance with a PCE of 18.26%. In addition, BR-C12-added ternary devices exhibit improved stability than binary ones. This work presents a method for constructing high-performance ternary OSCs and enriches the abundance of materials for the third components. A simple-structured small molecule of BR-C12 is used as third component in the binary blends of PM6:Y6 and PM6:L8-BO to achieve efficient ternary solar cells with enhanced PCEs up to 17.02% and 18.26%, respectively. [Display omitted] • Simple-structured small molecule as cost-effective third component were studied for PM6:Y6 ternary OPV. • The small molecule has good compatibility with PM6 which improves blend morphology and enhances charge transport. • Third component-added ternary devices exhibit improved stability over binary ones. • The ternary OPV with blend of PM6:L8-BO:BR-C12 achieved a PCE of 18.26%. [ABSTRACT FROM AUTHOR]

A new nonfused ring electron acceptor PDI-DO-2F is designed and synthesized by attaching perylenediimide (PDI) unit as a pendent group to the central donor core. Compared with the control molecule DO-2F , the introduction of PDI lateral substituent can greatly enhance the solubility and decrease the crystallinity of the resulted acceptor. The PBDB-T :PDI-DO-2F blend film exhibits a much better morphology with higher and more balanced carrier mobility in contrast to PBDB-T :DO-2F one. PDI-DO-2F based organic solar cells (OSCs) give a power conversion efficiency (PCE) of 11.78%, higher than DO-2F based ones (9.82%). Furthermore, PDI-DO-2F based OSCs shows a Δ E non-rad value of 0.23 eV, which is significantly lower than the DO-2F based ones (0.28 eV). More importantly, the addition of PDI-DO-2F as the third component to the PBDB-T :DO-2F binary system can optimize the morphology of blend films and improve the shelf stability of devices. And the PBDB-T :DO-2F : PDI-DO-2F based ternary OSCs achieve a higher PCE of 13.82%. [Display omitted] • A new nonfused ring electron acceptor is designed and synthesized. • PDI unit as a pendent group can greatly enhance the solubility and decrease the crystallinity of the acceptor. • Significantly different power conversion efficiencies of 9.82%, 11.78% and 13.82% are achieved. [ABSTRACT FROM AUTHOR]

[Display omitted] • Three small molecular acceptors were designed and synthesized. • Noncovalent Conformational Locks and Side-Chain Engineering can adjust the properties of acceptors. • Significantly different power conversion efficiencies of 12.09%, 12.30% and 14.25% are achieved. Three novel small molecular acceptors (SMAs) BO-2F , BO-C8-2F and BO-C2C6-C8-2F were designed and synthesized. These acceptors all possess planar molecular backbone because of the introduction of intramolecular noncovalent interaction. Among them, BO-C2C6-C8-2F with four side chains, which has the highest solubility, can form more appropriate nanomorphology when blending with PBDB-T. Hence, organic solar cells (OSCs) based on PBDB-T: BO-C2C6-C8-2F displayed an outstanding power convesion efficiency (PCE) of 14.25%, which is higher than BO-2F and BO-C8-2F based ones. To the best of our knowledge, the PCE of 14.25% is one of the highest for the OSCs based on A-π-D-π-A type SMAs. Our results have demonstrated that the combination of side-chain engineering and intramolecular conformation lock has a great prospect in the design of high performance SMAs for OSCs. [ABSTRACT FROM AUTHOR]