Search

In this article, a low complexity finite-control-set model predictive control (FCS-MPC) based on the discrete space vector modulation (DSVM) is proposed for T-type three-phase three-level (3P-3L) converters. Different from the conventional FCS-MPC, 48 virtual voltage vectors (VVs) of the converter are constructed by real VVs based on the DSVM. Thus, the performance of 3P-3L converters is significantly improved and the peak amplitude of high-order harmonics concentrates at the sampling frequency. Furthermore, two-stage FCS-MPC based on virtual VVs is proposed to reduce the computation burden. Its first stage selects one of six virtual VVs that minimizes the current tracking error. Then, these candidate VVs located in the same sector as the optimal virtual VV selected in the first stage are evaluated in the second-stage optimization. Thus, the computational efficiency has been greatly improved. To verify the validity of the proposed control method and show its superiority over the conventional FCS-MPC, experimental results are presented. [ABSTRACT FROM AUTHOR]

An improved two-stage model predictive current control (MPCC) for three-phase three-level converters in the paper, which can simultaneously achieve common-mode voltage (CMV) reduction, effective dc-link capacitor voltage control, and decreased computational burden, is proposed. Compared to the other current control strategies, it has the capability of handling multiple control objectives and possesses a simple structure. Furthermore, it greatly reduces the CMV since the peak CMVs of all the candidate voltage vectors are constrained to be less than one sixth of the dc-link voltage. In addition, an optimal two-stage voltage vector selection mechanism is employed in the proposed method. It helps to significantly reduce the computational complexity. Simulation and experimental results are provided to verify the effectiveness of the proposed method. [ABSTRACT FROM AUTHOR]

This paper presents a novel model predictive control (MPC) for the T-type single-phase three-level inverters. The cumbersome procedure in tuning of weighting factors is eliminated so that the implementation of the proposed MPC becomes easy. The constant switching frequency is achieved during the control implementation in order to facilitate the filter design. In order to optimize the distribution of the output current harmonics, multiple voltage vectors are employed in each control cycle with their application times setting inversely proportion to the respective cost function. The redundant small voltage vectors are utilized to balance the neutral point voltage of the inverter by directly regulating the upper and lower dc-link capacitors voltages. Finally, the proposed MPC algorithm is experimentally evaluated and compared with other two unfixed switching frequency MPC algorithms in terms of the steady state, transient performance, and parameter sensitivity. [ABSTRACT FROM AUTHOR]

In this article, an efficient model predictive control (MPC) using virtual voltage vectors for three-phase three-level converters is proposed. The proposed MPC achieves constant switching frequency by applying four voltage vectors, including one virtual voltage vectors and three other voltage vectors, in each control cycle. In addition, to reduce the computational burden, two-stage MPC approach is adopted. The first stage chooses one of six medium voltage vectors that minimizes the cost function. Then, in the second stage, these voltage vectors including virtual voltage vectors, which locate the same sector with the optimal medium voltage vector, are involved in the MPC optimization. The advantages of the proposed MPC over the classical MPC have been validated through experimental results. [ABSTRACT FROM AUTHOR]