Search

In this communication, the self-interference (SI) channel and the novel enabling techniques for a compact inband full-duplex relay are described and characterized in different operating environments. The full-duplex operation is based on a novel antenna design that uses wavetraps to provide passive isolation of up to 70 dB between the transmit and receive antenna ports. The passive isolation is complemented with novel active RF and digital cancellation stages that further suppress the residual SI to the receiver noise floor. Measurement results of a complete prototype implementation show that the proposed design can achieve an overall SI cancellation performance of over 100 dB even with an ambitious instantaneous bandwidth of 80 MHz. Similar results are obtained both in an anechoic chamber as well as in realistic multipath indoor environments. [ABSTRACT FROM PUBLISHER]

To tackle the 1000? mobile data challenge, the research towards the 5th generation of mobile cellular networks is currently ongoing. One clear enabler toward substantially improved network area capacities is the increasing level of network densification at different layers of the overall heterogeneous radio access system. Ultra-dense deployments, or DenseNets, seek to take network densification to a whole new level, where extreme spatial reuse is deployed. This article looks into DenseNets from the perspectives of different deployment strategies, covering the densification of the classical macro layer, extremely dense indoor femto layer, as well as outdoor distributed antenna system (DAS), which can be dynamically configured as a single microcell or multiple independent microcells. Also, the potential of a new indoor-to-outdoor service provisioning paradigm is examined. The different deployment solutions are analyzed from the network area spectral and network energy efficiency perspectives, with extreme densification levels, including both indoor and outdoor use scenarios. The obtained results indicate that dedicated indoor solutions with densely deployed femtocells are much more spectrumand energy-efficient approaches to address the enormous indoor capacity demands compared to densifying the outdoor macro layer, when the systems are pushed to their capacity limits. Furthermore, the dynamic outdoor DAS concept offers an efficient and capacity-adaptive solution to provide outdoor capacity, on demand, in urban areas. [ABSTRACT FROM PUBLISHER]

Space-time coded wireless transmission techniques with multiple transmit and receive antennas can provide considerable increases in both the link quality as well as link capacity when compared to ordinary single-antenna techniques. However, multiantenna transmission basically calls for multiple parallel radio implementations, and the resulting link performance is found to be very sensitive to the possible nonidealities of the individual analog radio front-ends. One important practical example is the so-called I/Q imbalance problem related to the amplitude and phase matching of the I/Q branches of the transmitters and receivers. In this paper, we analyze the I/Q imbalance effects in space-time coded transmit diversity system context, in terms of the resulting signal-to-interference ratio as a function of the imbalance properties, assuming the individual transmitter and receiver analog front-ends are based on the so-called direct-conversion radio architecture. The obtained results indicate that the I/Q imbalance effect is fundamentally more challenging in the multiantenna context compared to traditional single-antenna systems. In addition, two digital compensation methods are proposed for combating the resulting signal distortion on the receiver side. The first approach is based on algebraic properties of the derived signal models combined with proper pilot data, while the second one is blind, stemming from the blind signal separation principles. The resulting link-level performance of the proposed algorithms is evaluated using extensive computer simulations. Based on the obtained results, the I/Q imbalance effects can be efficiently compensated using the proposed techniques, the resulting link performance being practically identical to that of the ideal perfectly matched reference case. Furthermore, the proposed methods are also shown to correct for channel estimation errors, in addition to I/Q impairments, and are also reasonably robust against residual carrier offsets. [ABSTRACT FROM AUTHOR]

The general idea of software radio is to develop highly integrated radio transceiver structures with high degree of flexibility and multimode capabilities, achieved through increased role of digital signal processing software in defining the functionalities which have traditionally been implemented with analog RF techniques. This paper explores the software radio concept from the receiver architecture and signal processing points of view, with mainly the wireless terminal application in mind. We first discuss the critical issues in alternative receiver architectures with simplified analog parts and increased configurability. We also introduce certain advanced digital signal processing techniques which could potentially relieve some of the essential problems and pave the way towards DSP-based, highly integrated, and highly configurable terminals. Big emphasis is on efficient digital multirate signal processing methods and complex (I/Q) signal processing. Copyright © 2002 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]

Beamforming is one of the key technologies for achieving the high performance criteria in various modern and future wireless communications systems, in particular at the millimeter wave frequencies. In order to avoid or reduce the large signaling overhead and corresponding latency related to beam-training procedures, location-based beamforming utilizing available position information has been proposed. In this paper, by using the available position probability density function of a receiving device, we derive and analyze the capacity of a beamformed radio link, without and with beam-sweeping based beam training. Through the analysis, we show that by adjusting the beamforming and/or beam-training parameters appropriately, the radio link capacity can be optimized with respect to the prevailing positioning accuracy, and thus optimal utilization of radio resources is achieved with minimal radio access latency. [ABSTRACT FROM AUTHOR]

In this correspondence paper, we study the peak-to-average power ratio (PAPR) problem in orthogonal frequency-division multiplexing systems. In conventional clipping and filtering based PAPR reduction techniques, clipping noise is allowed to spread over the whole active passband, thus degrading the transmit signal quality similarly at all active subcarriers. However, since modern radio networks support frequency multiplexing of users and services with highly different quality-of-service expectations, clipping noise from PAPR reduction should be distributed unequally over the corresponding physical resource blocks (PRBs). To facilitate this, we present an efficient PAPR reduction technique, where clipping noise can be flexibly controlled and filtered inside the transmitter passband, allowing to control the transmitted signal quality per PRB. Numerical results are provided in 5G new radio mobile network context, demonstrating the flexibility and efficiency of the proposed method. [ABSTRACT FROM AUTHOR]

We derive a comprehensive analytical framework for the ED over generalized, extreme, and non-linear fading conditions which addresses the topic completely. This is carried out for both conventional and diversity receptions and it is based on the area under the ROC curve (AUC), which is an efficient performance measure that is widely used in physical sciences and engineering. This differentiates the considered methodology from the aforementioned routine approaches and additionally provides generic results on the arbitrary derivatives of the MGF of useful generalized processes. The asymptotic behavior of the derived expressions is also analyzed providing direct and concrete insights on the role and effect of the involved parameters on the ED performance. The offered analytic results are subsequently employed in quantifying the performance of ED over various types of fading conditions, which exhibits that ED performance is significantly degraded by even slight variations of the severity of fading. To this end, it is shown that the detrimental effects of fading can be effectively mitigated with the aid of square-law combining and switch-and-stay combining methods, as a low number of diversity branches can ensure sufficient and holistic performance improvement even in severe fading conditions. [ABSTRACT FROM PUBLISHER]

Inband FD operation has great potential in civilian/commercial wireless communications, because it can as much as double transmission links? spectral efficiency by exploiting the newfound capability for STAR that is facilitated by advanced SIC techniques. This article surveys the prospects of exploiting the emerging FD radio technology in military communication applications as well. In addition to enabling high-rate twoway tactical communications, the STAR capability could give a major technical advantage to armed forces by allowing their radio transceivers to conduct electronic warfare at the same time that they are also receiving or transmitting other signals at the same frequency bands. After comprehensively introducing FD transceiver architectures and SIC requirements in military communications, this article outlines and analyzes all the most promising defensive and offensive applications of the STAR capability. It is not out of the question that this disruptive technology could even bring about a paradigm shift in operations at the cyber-electromagnetic battleground. At least, forward-looking innovators in the military communications community would right now have a window of opportunity to engage in original, potentially high-impact scientific research on FD military radio systems, which we would like to spur on by this speculative tutorial article. [ABSTRACT FROM AUTHOR]

Cooperative communication has been shown to provide significant increase of transmission reliability and network capacity while expanding coverage in cellular networks. The present work is devoted to the investigation of the end-to-end performance and power allocation of a maximum-ratio-combining based regenerative multi-relay cooperative network over non-homogeneous scattering environment, which is the realistic case in many practical wireless communication scenarios. Novel analytic expressions are derived for the end-to-end symbol-error-rate of both M-ary phase-shift keying and M-ary quadrature amplitude modulation over independent and non-identically distributed generalized fading channels are given by exact analytic expressions that involve the Lauricella function and can be readily evaluated with the aid of a proposed computing algorithm. Simple analytic expressions are also derived for the corresponding symbol-error-rate at asymptotically high signal-to-noise ratios. The derived expressions are corroborated with respective results from computer simulations and are subsequently employed in formulating a sum-power optimization problem that enhances the system performance under total sum-power constraint within the multi-relay cooperative system. It is also shown that asymptotically optimum power allocation provides substantial performance gains over the corresponding equal power allocation, particularly, when the source-relay and relay-destination paths are highly unbalanced. [ABSTRACT FROM AUTHOR]

Spectrally non-contiguous transmissions pose serious transceiver design challenges due to the nonlinear PA. When two or more non-contiguous carriers with close proximity are amplified by the same PA, spurious emissions inside or in the vicinity of the transmitter RF band are created. These spurious emissions may violate emission limits or otherwise compromise network coverage and reliability. Lowering the transmit power is a straightforward remedy, but it will reduce throughput, coverage, and power efficiency of the device. To improve linearity without sacrificing performance, several DPD techniques have recently been proposed to target the spurious emissions explicitly. These techniques are designed to minimize the computational and hardware complexity of DPD, thus making them better suited for mobile terminals and other lowcost devices. In this article, these recent advances in DPD for non-contiguous transmission scenarios are discussed, with a focus on mitigating the spurious emissions in the concrete example case of non-contiguous dual-carrier transmission. The techniques are compared to more traditional DPD approaches in terms of their computational and hardware complexities, as well as linearization performance. [ABSTRACT FROM AUTHOR]

Techniques for wireless energy harvesting (WEH) are emerging as a fascinating set of solutions to extend the lifetime of energy-constrained wireless networks, and are commonly regarded as a key functional technique for almost perpetual communications. For example, with WEH technology, wireless devices are able to harvest energy from different light sources or Radio Frequency (RF) signals broadcast by ambient or dedicated wireless transmitters to support their operation and communications capabilities. WEH technology will have increasingly wider range of use in upcoming applications such as wireless sensor networks, Machine-to-Machine (M2M) communications, and the Internet of Things. In this paper, the usability and fundamental limits of joint RF and solar cell or photovoltaic harvesting based M2M communication systems are studied and presented. The derived theoretical bounds are in essence based on the Shannon capacity theorem, combined with selected propagation loss models, assumed additional link nonidealities, diversity processing, as well as the given energy harvesting and storage capabilities. Fundamental performance limits and available capacity of the communicating link are derived and analyzed, together with extensive numerical results evaluated in different practical scenarios, including realistic implementation losses and state-of-the-art printed supercapacitor performance figures with voltage doubler-based voltage regulator. In particular, low power sensor type communication applications using passive and semi-passive wake-up radio (WuR) are addressed in the study. The presented analysis principles and results establish clear feasibility regions and performance bounds for wireless energy harvesting based low rate M2M communications in the future IoT networks. [ABSTRACT FROM AUTHOR]