Search

Recently, there has been a growing demand to develop portable devices for the fast detection of contaminants in food safety, healthcare, and environmental fields. Herein, two biosensing methods were designed by the use of nicotinamide adenine dinucleotide phosphate (NAD(P)H)-dependent TetX2 enzyme activity and thionine as an excellent electrochemical and colorimetric mediator/probe to monitor tetracycline (TC) in milk. The nanoporous glassy carbon electrode (NPGCE) modified with polythionine was first prepared by electrochemically and then TetX2 was immobilized onto the NPGCE using polyethyleneimine. The prepared biosensor provided a high electrocatalytic response toward NAD(P)H by significantly reducing its overpotential. The proposed biosensor exhibited a detection limit of 40 nM with a linear range of 0.1-0.8 µM for TC determination. Besides, the thionine probe was used to develop a novel colorimetric assay using a simple enzymatic color reaction within a few minutes. The limit of detection for TC was experimentally achieved as 60 nM, which was lower than the safety levels established by the World Health Organization (225 nM). The correlation between change in the color of the solution and the concentration of TC was used for quality control of milk samples, as confirmed by the standard high-performance liquid chromatography method. The results show the great potential of the proposed assays as portable instruments for on-site TC measurements. [ABSTRACT FROM AUTHOR]

Different carbon-based nanostructures were used to investigate direct electron transfer (DET) of TetX2 monooxygenase (TetX2), and an enzyme-based biosensor for sensitive determination of tetracycline (TC) also fabricated. A polyethyleneimine (PEI) with positive charge groups was used for immobilization of TetX2 on modified glassy carbon electrodes. Cyclic voltammetry (CV) was employed to study the electrochemical characteristics of the immobilized enzyme and the performance of the proposed biosensor. Amongst multiple carbon-modified electrodes, nano-porous glassy carbon electrode (NPGCE) was selected because of its amplified signal response for flavin adenine dinucleotide (FAD) and superior electrocatalytic behavior toward oxygen reduction. The cyclic voltammogram of PEI/TetX2/NPGCE showed two couple of well-defined and quasi-reversible redox peaks of FAD, consistent with the realization of DET. The prepared electrode was then successfully introduced as a biosensing interface based on the oxygen reduction peak current, resulting in a linear range response from 0.5 to 5 μM with a good detection limit of 18 nM. The as-fabricated electrode demonstrates a fast response and excellent stability for the detection of TC. The results indicate that this simple, rapid, eco-friendly and economic strategy of PEI/TetX2/NPGCE preparation has potential for the fabrication of an enzyme-based biosensor for the practical detection of TC in food products. Unlabelled Image • Bacterial TetX2 monooxygenase was used for electrochemical sensing of tetracycline. • TetX2 immobilization on modified electrodes was done by polyethylenimine. • Nano-porous glassy carbon electrode enhanced the direct electrochemistry of TetX2. • High selectivity and sensitivity were achieved with a low detection limit of 18 nM. [ABSTRACT FROM AUTHOR]

The authors describe an electrochemical method for aptamer-based determination of insulin at femtomolar concentrations. The surface of a screen printed electrode was modified with ordered mesoporous carbon that was chemically modified with 1,3,6,8-pyrenetetrasulfonate (TPS). The amino-terminated aptamer was then covalently linked to TPS via reactive sulfonyl chloride groups. Subsequently, the redox probe Methylene Blue (MB) was interacted into the aptamer. The MB-modified binds to insulin and this results in the release of MB and a decreased signal as obtained by differential pulse voltammetry, best at a working voltage of -0.3 V (versus silver pseudo-reference electrode). Insulin can be quantified by this method in the 1.0 fM to 10.0 pM concentration range, with a 0.18 fM limit of detection (at 3σ/slope). The assay was applied to the determination of insulin in spiked human serum samples. The method is highly sensitive, selective, stable, and has a wide analytical range. [ABSTRACT FROM AUTHOR]