Search

The glycoside hydrolase family 3 (GH3) β-glucosidases from filamentous fungi are crucial industrial enzymes facilitating the complete degradation of lignocellulose, by converting cello-oligosaccharides and cellobiose into glucose. Understanding the diverse domain organization is essential for elucidating their biological roles and potential biotechnological applications. This research delves into the variability of domain organization within GH3 β-glucosidases. Two distinct configurations were identified in fungal GH3 β-glucosidases, one comprising solely the GH3 catalytic domain, and another incorporating the GH3 domain with a C-terminal fibronectin type III (Fn3) domain. Notably, Streptomyces filamentous bacteria showcased a separate clade of GH3 proteins linking the GH3 domain to a carbohydrate binding module from family 2 (CBM2). As a first step to be able to explore the role of accessory domains in β-glucosidase activity, a screening system utilizing the well-characterised Aspergillus niger β-glucosidase gene (bglA) in bglA deletion mutant host was developed. Based on this screening system, reintroducing the native GH3-Fn3 gene successfully expressed the gene allowing detection of the protein using different enzymatic assays. Further investigation into the role of the accessory domains in GH3 family proteins, including those from Streptomyces, will be required to design improved chimeric β-glucosidases enzymes for industrial application. [ABSTRACT FROM AUTHOR]

Understanding the relation between enzyme domain structure and catalytic activity is crucial for optimal engineering of novel enzymes for lignocellulose bioconversion. Xylanases with varying specificities are commonly used to valorise the hemicellulose arabinoxylan (AX), yet characterization of specific arabinoxylanases remain limited. Two homologous GH5_34 arabinoxylanases, Hh Xyn5A and Ct Xyn5A, in which the two domains are connected by a 40-residue linker, exhibit distinct activity on AX, yielding different reaction product patterns, despite high sequence identity, conserved active sites and similar domain composition. In this study, the carbohydrate binding module 6 (CBM6), or the inter domain linker together with CBM6, were swapped to investigate their influence on hydrolytic activity and oligosaccharide product pattern on cereal AXs. The variants, with only CBM6 swapped, displayed reduced activity on commercial wheat and rye AX, as well as on extracted oat fibre, compared to the original enzymes. Additionally, exchange of both linker and CBM6 resulted in a reduced ratio of enzyme produced in soluble form in Escherichia coli cultivations, causing loss of activity of both Hh Xyn5A and Ct Xyn5A variants. Analysis of oligosaccharide product patterns applying HPAEC–PAD revealed a decreased number of reaction products for Ct Xyn5A with swapped CBM6, which resembled the product pattern of Hh Xyn5A. These findings emphasize the importance of the CBM6 interactions with the linker and the catalytic domain for enzyme activity and specificity, and underlines the role of the linker in enzyme structure organisation and product formation, where alterations in linker interactions with the catalytic and/or CBM6 domains, influence enzyme-substrate association and specificity. [ABSTRACT FROM AUTHOR]

Carbohydrate active enzymes are valuable tools in cereal processing to valorize underutilized side streams. By solubilizing hemicellulose and modifying the fiber structure, novel food products with increased nutritional value can be created. In this study, a novel GH5_34 subfamily arabinoxylanase from Herbinix hemicellulosilytica , Hh Xyn5A, was identified, produced and extensively characterized, for the intended exploitation in cereal processing to solubilize potential prebiotic fibers: arabinoxylo-oligosaccharides. The purified two-domain Hh Xyn5A (catalytic domain and CBM6) demonstrated high storage stability, showed a melting temperature T m of 61°C and optimum reaction conditions were determined to 55°C and pH 6.5 on wheat arabinoxylan. Hh Xyn5A demonstrated activity on various commercial cereal arabinoxylans and produced prebiotic AXOS, whereas the sole catalytic domain of Hh Xyn5A did not demonstrate detectable activity. Hh Xyn5A demonstrated no side activity on oat β-glucan. In contrast to the commercially available homolog Ct Xyn5A, Hh Xyn5A gave a more specific HPAEC–PAD oligosaccharide product profile when using wheat arabinoxylan and alkali extracted oat bran fibers as the substrate. Results from multiple sequence alignment of GH5_34 enzymes, homology modeling of Hh Xyn5A and docking simulations with ligands XXXA3, XXXA3XX and X5 concluded that the active site of Hh Xyl5A catalytic domain is highly conserved and can accommodate both shorter and longer ligands. However, significant structural dissimilarities between Hh Xyn5A and Ct Xyn5A in the binding cleft of CBM6, due to the lack of important ligand-interacting residues, is suggested to cause the observed differences in substrate specificity and product formation. [ABSTRACT FROM AUTHOR]

Metallothioneins (MTs) are a class of cysteine-rich metal-binding proteins. Cadmium (Cd) is one of the toxic heavy metal pollutants. In our previous research, the full-length cDNA of MT (Cd specificity) from freshwater crab (Sinopotamon henanense) (Sh MT) was cloned and genetically modified to Sh MT3 by site-directed mutagenesis to enhance the tolerance for Cd2+, however, it was limited in actual Cd2+ adsorption due to instability. Here, Sh MT3-CBM, a novel recombinant fusion protein, was prepared. CBM is a carbohydrate binding module that can specifically bind cellulose while Sh MT3 can effectively chelate Cd2+. The biosorbent Cellulose1- Sh MT3-CBM was obtained by screening suitable cellulose materials. The selective adsorption experiments showed that Cellulose1- Sh MT3-CBM had a preference for Cd2+. In low-concentration Cd2+ solutions, the removal efficiency was >99 %, and the adsorption equilibrium was reached within 15 min. The saturated adsorption capacity of Cellulose1- Sh MT3-CBM for Cd2+ is 180.35 ± 4.67 mg/g (Dry Weight). Regeneration experiments showed that adsorption efficiency was maintained after six cycles. The MTT experiment showed that Cellulose1- Sh MT3-CBM had low cytotoxicity. Meanwhile, Cellulose1- Sh MT3-CBM can preferentially remove Cd2+ in actual water samples and boiler sewage. In this study, an environmentally friendly biosorbent which can adsorb Cd2+ efficiently and quickly was prepared for actual water treatment. [Display omitted] • Sh MT3-CBM was obtained by genetic engineering technology. • Cellulose1- Sh MT3-CBM was obtained by immobilization technology. • In low concentration solution, the removal efficiency reaches >99 %. • Cellulose1- Sh MT3-CBM showed excellent reusability. • Cellulose1- Sh MT3-CBM is non-toxic to cells. [ABSTRACT FROM AUTHOR]

Exoglucanase (CBH) is the rate limiting enzyme in the process of cellulose degradation. The carbohydrate binding module (CBM) can improve the accessibility of cellulase to substrate, thereby promoting the enzymatic hydrolysis of cellulase. In this study, the influence of CBM on the properties of GH6 exoglucanase from Chaetomium thermophilum (CtCBH) is systematically explored from three perspectives: the fusion of exogenous CBM, the exogenous CBM replacement of its own CBM, and the deletion of its own CBM. The parental and reconstructed CtCBH presented the same optimum pH (6.0) and temperature (60 °C) for maximum activity. Fusion of exogenous CBM increased the binding capacity of CtCBH to Avicel by 8% and 9%, respectively, but it had no significant effect on its catalytic activity. The exogenous CBM replacement of its own CBM resulted in a 12% reduction in the binding ability of CtCBH to Avicel, and a 26% reduction in the catalytic activity of Avicel. The deletion of its own CBM significantly reduced the binding ability of CtCBH to Avicel by approximately 53%, but its catalytic activity was not obviously reduced. These observations suggest that binding ability of CBM is not necessary for the catalysis of CtCBH. • CBM is not necessary for the catalysis of CtCBH. • The deletion of CBM significantly reduced the binding ability of CtCBH. • The deletion of CBM did not significantly reduce its catalytic activity. • The fusion of exogenous CBM can improve the binding ability of CtCBH. • The replacement of CBM affected the catalytic activity and binding ability of CtCBH. [ABSTRACT FROM AUTHOR]

Because of their potential impact in food and bioprocessing, diagnostics, green(er) chemistry, and waste remediation, new enzyme immobilization technologies continue to be explored. In this work, a recombinant lactase (β-galactosidase) (LacZ) presenting a carbohydrate binding module (LacZ-CBM), was engineered, expressed, and immobilized onto cellulose (LacZ-CBM:cell). Binding density, activity, and pH and temperature activity profiles were characterized in comparison to wild type lactase (LacZ). LacZ-CBM effectively self-immobilized onto cellulose (Sigmacell®) in less than 2 h, demonstrating that recombinant enzymes with cellulose binding modules can enable immobilization onto solid supports without the need for chemical crosslinking agents. The immobilized recombinant LacZ-CBM:cell retained over 30% of its initial activity over 9 cycles. Both immobilized and non-immobilized LacZ-CBM presented similar optimum reaction conditions as wild type lactase, which demonstrates that the addition of a carbohydrate binding module (CBM) to lactase does not alter its optimum reaction conditions. This work has direct relevance to immobilized lactase applications (e.g. lactose reduced milk; oligosaccharide production) and serves as a model for other greener enzyme immobilization applications. [ABSTRACT FROM AUTHOR]

Alginate lyases are potential agents for disrupting alginate‐rich Pseudomonas biofilms in the infected lungs of cystic fibrosis patients but there is as yet no clinically approved alginate lyase that can be used as a therapeutic. We report here the endolytic alginate lyase activity of a recombinant Cellulophaga algicola alginate lyase domain (CaAly) encoded by a gene that also codes for an N‐terminal carbohydrate‐binding module, CBM6, and a central F‐type lectin domain (CaFLD). CaAly degraded both polyM and polyG alginates with optimal temperature and pH of 37°C and pH 7, respectively, with greater preference for polyG. Recombinant CaFLD bound to fucosylated glycans with a preference for H‐type 2 glycan motif, and did not have any apparent effect on the enzyme activity of the co‐associated alginate lyase domain in the recombinant protein construct, CaFLD_Aly. We assessed the potential of CaAly and other alginate lyases previously reported in published literature to inhibit biofilm formation by a clinical strain, Pseudomonas aeruginosa MCC 2081. Of all the alginate lyases tested, CaAly displayed most inhibition of in vitro biofilm formation on plastic surfaces. We also assessed its inhibitory ability against P. aeruginosa 2081 biofilms formed over a monolayer of A549 lung epithelial cells. Our study indicated that CaAly is efficacious in inhibition of biofilm formation even on A549 lung epithelial cell line monolayers. [ABSTRACT FROM AUTHOR]

Summary: Plants must rearrange the network of complex carbohydrates in their cell walls during normal growth and development. To accomplish this, all plants depend on proteins called expansins that nonenzymatically loosen noncovalent bonding between cellulose microfibrils.Surprisingly, expansin genes have more recently been found in some bacteria and microbial eukaryotes, where their biological functions are largely unknown.Here, we reconstruct a comprehensive phylogeny of microbial expansin genes. We find these genes in all eukaryotic microorganisms that have structural cell wall cellulose, suggesting expansins evolved in ancient marine microorganisms long before the evolution of land plants. We also find expansins in an unexpectedly high diversity of bacteria and fungi that do not have cellulosic cell walls. These bacteria and fungi inhabit varied ecological contexts, mirroring the diversity of terrestrial and aquatic niches where plant and/or algal cellulosic cell walls are present.The microbial expansin phylogeny shows evidence of multiple horizontal gene transfer events within and between bacterial and eukaryotic microbial lineages, which may in part underlie their unusually broad phylogenetic distribution. Overall, expansins are unexpectedly widespread in bacteria and eukaryotes, and the contribution of these genes to microbial ecological interactions with plants and algae has probbaly been underappreciated. [ABSTRACT FROM AUTHOR]

To understand the influence of family 3 Carbohydrate Binding Module (hereafter CBM3), single (GH5 cellulase; CelB, CelBΔCBM), bi-chimeric [GH26 endo-mannanase (ManB-1601) and GH11 endo-xylanase (XynB); ManB-XynB [1] , ManB-XynB-CBM] and tri-chimeric [ManB-XynB-CelB [1] , ManB-XynB-CelBΔCBM] enzyme variants (fused or deleted of CBM) were produced and purified to homogeneity. CBM3 did not alter the pH and temperature optima of bi- and tri-chimeric enzymes but improved the pH and temperature stability of ManB in CBM variants of bi-/tri-chimeric enzymes. Truncation of CBM in CelB shifted the pH optimum and increased the melting temperature (T m 65 ℃). CBM3 improved both substrate affinity (K m) and catalytic efficiency (k cat /K m) of fused enzymes in tri-chimera and CelB but only K m for bi-chimera. Far-UV CD of CelB and bi- and tri-chimeric enzymes suggested that CBM3 improved the α-helical content and compactness in the native state but did not prevent disintegration of secondary structural contents at acidic pH. Steady-state fluorescence studies suggested that under acidic conditions CBM3 prevented the exposure of hydrophobic patches in bi-chimeric protein but could not avert the opening up of chimeric enzyme structure. Aqueous enzyme assisted treatment of mature coconut kernel using single, bi- and tri-chimeric enzymes led to cracks, peeling and fracturing of the matrix and improved the oil yield by up to 22%. • Functional expression of CBM3 variants of single and bi- and tri-chimeric enzymes. • Fusion or deletion of CBM3 alters biochemical properties of enzymes. • CBM3 renders higher structural compactness in enzymes under native state. • CBM3 does not prevent denaturation of enzymes at acidic pH. • Bi-chimera fused with CBM3 improves oil extraction from mature coconut by 22%. [ABSTRACT FROM AUTHOR]

• CDH of Termitomyces clypeatus possesses distinct carbohydrate binding module. • First report of three domains- cytochrome, dehydrogenase, CBM in basidiomycete CDH. • Dehydrogenase domain is devoid of cellulose binding residues. • Phylogenetic analysis clusters it with the CDH of ascomycetes group of fungi. • Possible phylogenetic status of this fungus have been discussed. Filamentous fungi secrete various oxidative enzymes to degrade the glycosidic bonds of polysaccharides. Cellobiose dehydrogenase (CDH) (E.C.1.1.99.18) is one of the important lignocellulose degrading enzymes produced by various filamentous fungi. It contains two stereo specific ligand binding domains, cytochrome and dehydrogenase - one for heme and the other for flavin adenine dinucleotide (FAD) respectively. The enzyme is of commercial importance for its use in amperometric biosensor, biofuel production, lactose determination in food, bioremediation etc. Termitomyces clypeatus , an edible fungus belonging to the basidiomycetes group, is a good producer of CDH. In this paper we have analyzed the structural properties of this enzyme from T. clypeatus and identified a distinct carbohydrate binding module (CBM) which is not present in most fungi belonging to the basidiomycetes group. In addition, the dehydrogenase domain of T. clypeatus CDH exhibited the absence of cellulose binding residues which is in contrast to the dehydrogenase domains of CDH of other basidiomycetes. Sequence analysis of cytochrome domain showed that the important residues of this domain were conserved like in other fungal CDHs. Phylogenetic tree, constructed using basidiomycetes and ascomycetes CDH sequences, has shown that very surprisingly the CDH from T. clypeatus, which is classified as a basidiomycetes fungus, is clustered with the ascomycetes group. A homology model of this protein has been constructed using the CDH enzyme of ascomycetes fungus Myricoccum thermophilum as a template since it has been found to be the best match sequence with T. clypeatus CDH. We also have modelled the protein with its substrate, cellobiose, which has helped us to identify the substrate interacting residues (L354, P606, T629, R631, Y649, N732, H733 and N781) localized within its dehydrogenase domain. Our computational investigation revealed for the first time the presence of all three domains - cytochrome, dehydrogenase and CBM - in the CDH of T. clypeatus, a basidiomycetes fungus. In addition to discovering the unique structural attributes of this enzyme from T. clypeatus , our study also discusses the possible phylogenetic status of this fungus. [ABSTRACT FROM AUTHOR]

Carbohydrate Binding Modules (CBMs) targeting cellulose, xylan and mannan have been reported, however, a CBM targeting rhamnogalacturonan I (RG I) has never been identified. We had studied earlier a rhamnogalacturonan lyase ( Ct RGL) from Clostridium thermocellum that was associated with a family 35 CBM, Rgl- CBM35. In this study we show that Rgl -CBM35 displays binding with β- d -glucuronic acid (β-D-Glc p A), Δ4,5-anhydro- d -galactopyranosyluronic acid (Δ4,5-Gal p A), rhamnogalacturonan I, arabinan, galactan, glucuronoxylans and arabinoxylans. Rgl -CBM35 contains a conserved ligand binding site in the loops known for binding β-D-Glc p A and Δ4,5-Gal p A moiety of unsaturated RG I and pectic-oligosaccharides. Mutagenesis revealed that Asn118 plays an important role in binding β-D-Glc p A, Δ4,5-Gal p A, sugarbeet arabinan and potato galactan at its conserved ligand binding site present in surface exposed loops. EDTA-treated Rgl -CBM35 showed no affinity towards β-D-Glc p A and Δ4,5-Gal p A underscoring Ca 2+ mediated ligand recognition. Contrastingly, the EDTA-treated Rgl -CBM35 and its mutant N118A displayed affinity for sugarbeet arabinan and potato galactan. The curtailed affinity of Y37A/N118A and R69A/N118A double mutants towards sugarbeet arabinan emphasized the presence of a second ligand binding site. Rgl -CBM35 is the first CBM reported to primarily target RG I and also is the first member of family 35 CBM possessing at least two ligand binding sites. [ABSTRACT FROM AUTHOR]

Enzymatically-active bacterial cellulose (BC) was prepared by non-covalent immobilization of a hybrid enzyme composed by a β-galactosidase from Thermotoga maritima (TmLac) and a carbohydrate binding module (CBM2) from Pyrococcus furiosus . TmLac-CBM2 protein was bound to BC, with higher affinity at pH 6.5 than at pH 8.5 and with high specificity compared to the non-engineered enzyme. Both hydrated (HBC) and freeze-dried (DBC) bacterial cellulose showed equivalent enzyme binding efficiencies. Initial reaction rate of HBC-bound enzyme was higher than DBC-bound and both of them were lower than the free enzyme. However, enzyme performance was similar in all three cases for the hydrolysis of 5% lactose to a high extent. Reuse of the immobilized enzyme was limited by the stability of the β-galactosidase module, whereas the CBM2 module provided stable attachment of the hybrid enzyme to the BC support, after long incubation periods (3 h) at 75 °C. [ABSTRACT FROM AUTHOR]

Bifunctional cellulase (glycoside hydrolase 5, GH5) from Bacillus sp. D04 having both endo- and exoglucanase activities was fused with two types of carbohydrate binding modules (CBMs). CBM3 from Bacillus sp. D04 and CBM9 from Thermotoga maritima Xyn10A were added to GH5 to hydrolyze microcrystalline cellulose (Avicel) as well as water-soluble cellulose (carboxymethyl cellulose, CMC). The optimum temperature of GH5 was 50oC, while it increased to 60oC for the fusion GH5-CBM3 and GH5-CBM9, indicating that addition of CBM increased the thermostability of the enzyme. Addition of CBM3 and CBM9 enhanced the GH5 affinity (KM), for which KM decreased from 104 to 33.9 ~ 35.1 mg/mL for CMC, and from 115 to 55.5 ~ 80.3 mg/mL for Avicel, respectively. The catalytic efficiency (kcat/KM) also increased from 4.80 to 5.36 ~ 6.46 (mL/mg)/sec for CMC, and from 1.77 to 2.40 ~ 4.45 (mL/mg)/sec for Avicel, respectively, by addition of CBM3 and CBM9. [ABSTRACT FROM AUTHOR]

Enzymatic processing is considered a promising approach for advancing environmentally friendly industrial processes, such as the use of endoglucanase (EG) enzyme in the production of nanocellulose. However, there is ongoing debate regarding the specific properties that make EG pretreatment effective in isolating fibrillated cellulose. To address this issue, we investigated EGs from four glycosyl hydrolase (GH) families (5, 6, 7, and 12) and examined the roles of the three-dimensional structure and catalytic features, with a focus on the presence of a carbohydrate binding module (CBM). Using eucalyptus Kraft wood fibers, we produced cellulose nanofibrils (CNFs) through mild enzymatic pretreatment, followed by disc ultra-refining. Comparing the results with the control (without pretreatment), we observed that GH5 and GH12 enzymes (without CBM) reduced fibrillation energy by approximately 15 %. The most significant energy reduction, 25 and 32 %, was achieved with GH5 and GH6 linked to CBM, respectively. Notably, these CBM-linked EGs improved the rheological properties of CNF suspensions without releasing soluble products. In contrast, GH7-CBM exhibited significant hydrolytic activity, resulting in the release of soluble products, but did not contribute to a reduction in fibrillation energy. This discrepancy can be attributed to the large molecular weight and wide cleft of GH7-CBM, which led to the release of soluble sugars but had little impact on fibrillation. Our findings suggest that the improved fibrillation observed with EG pretreatment is primarily driven by efficient enzyme adsorption on the substrate and modification of the surface viscoelasticity (amorphogenesis), rather than hydrolytic activity or release of products. Energy consumption and properties of cellulose nanofibers produced after single-step, low-loading enzyme pretreatment of wood pulp. [Display omitted] [ABSTRACT FROM AUTHOR]

A recombinant β-1,4 endoglucanase, At GH9C-CBM3A-CBM3B from Acetivibrio thermocellus ATCC27405 was explored for biochemical properties and the role of its associated CBMs in catalysis. The gene expressing full-length multi-modular β-1,4-endoglucanase (At GH9C-CBM3A-CBM3B) and its truncated derivatives (At GH9C-CBM3A, At GH9C, CBM3A and CBM3B) were independently cloned and expressed in Escherichia coli BL21(DE3) cells and purified. At GH9C-CBM3A-CBM3B showed maximal activity at 55 °C and pH 7.5. At GH9C-CBM3A-CBM3B exhibited highest activity against carboxy methyl cellulose (58.8 U/mg) followed by lichenan (44.5 U/mg), β-glucan (36.2 U/mg) and hydroxy ethyl cellulose (17.9 U/mg). Catalytic module, At GH9C showed insignificant activity against the substrates, signifying the essential requirement of CBMs in catalysis. At GH9C-CBM3A-CBM3B displayed stability in pH range, 6.0–9.0 and thermostability up to 60 °C for 90 min with unfolding transition midpoint (T m) of 65 °C. The generation of cellotetraose and other higher oligosaccharides by At GH9C-CBM3A-CBM3B confirmed it as an endo -β-1,4-glucanase. At GH9C activity was partially recovered by the addition of equimolar concentration of CBM3A, CBM3B or CBM3A + CBM3B by 47 %, 13 % or 50 %, respectively. Moreover, the associated CBMs imparted thermostability to the catalytic module, At GH9C. These results showed that the physical association of At GH9C with its associated CBMs and the cross-talk between CBMs are necessary for At GH9C-CBM3A-CBM3B in effective cellulose catalysis. • At GH9C-CBM3A-CBM3B of Acetivibrio thermocellus is a new endoglucanase of GH9 family • Endoglucanase At GH9C-CBM3A-CBM3B gave maximum activity at 55 °C and pH 7.5 • At GH9C-CBM3A-CBM3B is thermostable and stable in wide range of pH. • Mg2+ ion is present in At GH9C-CBM3A-CBM3B helping in thermostability and catalysis • Physical association of At GH9C with CBMs is needed for effective glucan hydrolysis [ABSTRACT FROM AUTHOR]

Physarum polycephalum is an unusual macroscopic myxomycete expressing a large range of glycosyl hydrolases. Among them, enzymes from the GH18 family can hydrolyze chitin, an important structural component of the cell walls in fungi and in the exoskeleton of insects and crustaceans. Low stringency sequence signature search in transcriptomes was used to identify GH18 sequences related to chitinases. Identified sequences were expressed in E. coli and corresponding structures modelled. Synthetic substrates and in some cases colloidal chitin were used to characterize activities. Catalytically functional hits were sorted and their predicted structures compared. All share the TIM barrel structure of the GH18 chitinase catalytic domain, optionally fused to binding motifs, such as CBM50, CBM18, and CBM14, involved in sugar recognition. Assessment of the enzymatic activities following deletion of the C-terminal CBM14 domain of the most active clone evidenced a significant contribution of this extension to the chitinase activity. A classification based on module organization, functional and structural criteria of characterized enzymes was proposed. Physarum polycephalum sequences encompassing a chitinase like GH18 signature share a modular structure involving a structurally conserved catalytic TIM barrels decorated or not by a chitin insertion domain and optionally surrounded by additional sugar binding domains. One of them plays a clear role in enhancing activities toward natural chitin. Myxomycete enzymes are currently poorly characterized and constitute a potential source for new catalysts. Among them glycosyl hydrolases have a strong potential for valorization of industrial waste as well as in therapeutic field. [Display omitted] • Slime mold P. polycephalum expresses a large number of GH18 glycoside hydrolases. • Sequences share decorated variants of the catalytic TIM barrel fold of chitinases. • Sugar binding motifs, such as CBM50, CBM18, and CBM14 are fused to the TIM barrel. • Three of the characterized enzymes efficiently hydrolyze colloidal chitin. • Functional roles of C-and N-terminal extensions were characterized and a classification proposed. [ABSTRACT FROM AUTHOR]

Two novel glycosyl hydrolase family 5 (GH5) β-mannanases (AoMan5A and AoMan5B) were identified from Aspergillus oryzae RIB40 by genome mining. The AoMan5A contains a predicted family 1 carbohydrate binding module (CBM-1), located at its N-terminal. The AoMan5A, AoMan5 B and truncated mutant AoMan5AΔCL (truncating the N-terminal CBM and linker of AoMan5A) were expressed retaining the N-terminus of the native protein in Pichia pastoris GS115 by pPIC9 K M . The specific enzyme activity of the purified reAoMan5A, reAoMan5 B and reAoMan5AΔCL towards locust bean gum at pH 3.6 and 40 °C for 10 min, was 8.3, 104.2 and 15.8 U/mg, respectively. The temperature properties of the reAoMan5AΔCL were improved by truncating CBM. They can degrade the pretreated konjac flour and produce prebiotics. In addition, they had excellent stability under simulative gastric fluid and simulative prilling process. All these properties make these recombinant β-mannanases potential additives for use in the food and feed industries. [ABSTRACT FROM AUTHOR]

The model 3-D structure of xylanase KRICT PX3 (JF320814) identified by DNA sequence analysis revealed a catalytic domain and CBM4-9 which functions as a xylan binding domain (XBD). To identify its role in xylan hydrolysis, six expression plasmids were constructed encoding the N-terminal CBM plus the catalytic domain or different glycosyl hydrolases, and the biochemical properties of the recombinant enzymes were compared to the original structure of PX3 xylanase. All six of the recombinant xylanases with the addition of CBM in the pIVEX-GST expression vector showed no improved PX3 hydrolytic activity. However, the absence of the CBM domain resulted in a decrement of 40% in thermostability, movement of the optimal temperature from 55 °C to 45 °C, alteration of the optimal pH range from 5–10 to 6–8, and reduction of the enzymatic activity to one-second under the same condition, respectively. The putative XBD in PX3 comprises a new N-terminal domain homologous to the catalytic thermostabilizing domains from other xylanases. Analysis of the main products released from xylan indicate that the recombinant enzymes act as endo -1,4-β-xylanases but differ in their hydrolysis of xylan from beech wood, birch wood, and oat spelt. [ABSTRACT FROM AUTHOR]

The heteropolysaccharide xyloglucan (XyG) comprises up to one-quarter of the total carbohydrate content of terrestrial plant cell walls and, as such, represents a significant reservoir in the global carbon cycle. The complex composition of XyG requires a consortium of backbone-cleaving endo-xyloglucanases and side-chain cleaving exo-glycosidases for complete saccharification. The biochemical basis for XyG utilization by the model Gram-negative soil saprophytic bacterium Cellvibrio japonicus is incompletely understood, despite the recent characterization of associated side-chain cleaving exo-glycosidases. We present a detailed functional and structural characterization of a multimodular enzyme encoded by gene locus CJA_2477. The CJA_2477 gene product comprises an N-terminal glycoside hydrolase family 74 ( GH74) endo-xyloglucanase module in train with two carbohydrate-binding modules ( CBMs) from families 10 and 2 ( CBM10 and CBM2). The GH74 catalytic domain generates Glc4-based xylogluco-oligosaccharide (Xy GO) substrates for downstream enzymes through an endo-dissociative mode of action. X-ray crystallography of the GH74 module, alone and in complex with Xy GO products spanning the entire active site, revealed a broad substrate-binding cleft specifically adapted to XyG recognition, which is composed of two seven-bladed propeller domains characteristic of the GH74 family. The appended CBM10 and CBM2 members notably did not bind XyG, nor other soluble polysaccharides, and instead were specific cellulose-binding modules. Taken together, these data shed light on the first step of xyloglucan utilization by C. japonicus and expand the repertoire of GHs and CBMs for selective biomass analysis and utilization. Database Structural data have been deposited in the RCSB protein database under the Protein Data Bank codes: , , and . [ABSTRACT FROM AUTHOR]

Background Galactose oxidase (GaO) selectively oxidizes the primary hydroxyl of galactose to a carbonyl, facilitating targeted chemical derivatization of galactose-containing polysaccharides, leading to renewable polymers with tailored physical and chemical properties. Here we investigate the impact of a family 29 glucomannan binding module on the activity and binding of GaO towards various polysaccharides. Specifically, CBM29-1-2 from Piromyces equi was separately linked to the N- and C-termini of GaO. Results Both GaO–CBM29 and CBM29–GaO were successfully expressed in Pichia pastoris , and demonstrated enhanced binding to galactomannan, galactoglucomannan and galactoxyloglucan. The position of the CBM29 fusion affected the enzyme function. Particularly, C-terminal fusion led to greatest increases in galactomannan binding and catalytic efficiency, where relative to wild-type GaO, k cat / K m values increased by 7.5 and 19.8 times on guar galactomannan and locust bean galactomannan, respectively. The fusion of CBM29 also induced oligomerization of GaO–CBM29. Major conclusions Similar to impacts of cellulose-binding modules associated with cellulolytic enzymes, increased substrate binding impeded the action of GaO fusions on more concentrated preparations of galactomannan, galactoglucomannan and galactoxyloglucan; this was especially true for GaO–CBM29. Given the N-terminal positioning of the native galactose-binding CBM32 in GaO, the varying impacts of N-terminal versus C-terminal fusion of CBM29-1-2 may reflect competing action of neighboring CBMs. General significance This study thoroughly examines and discusses the effects of CBM fusion to non-lignocellulytic enzymes on soluble polysaccharides. Herein kinetics of GaO on galactose containing polysaccharides is presented for the first time. [ABSTRACT FROM AUTHOR]

Filter paper provides an excellent matrix for retention of proteins containing a cellulose binding domain. To use this capability for manipulating recombinant fusion proteins, binding and elution parameters were explored and procedures developed for small scale purification, modification and assay. Proteins were tagged with the cellulose binding domain from the Clostridium thermocellum CipB gene via a cleavable linker. Filter paper disks of 6 mm diameter were able to bind up to 80 μg protein although there was a substantial dependence on molecular size. Different means of introducing fusion proteins to the disks allow either binding within 20 min from microliter volumes or slower binding from milliliter volumes. Elution with protease in small volumes yielded greater than 10 μg amounts with concentrations in the 1–2 mg/ml range. To demonstrate their utility, disks were used for small scale protein purification, covalent modification of protein, immunoprecipitation, and in a binding assay. These versatile methods allow parallel processing of multiple samples and may find many uses when only small amounts of protein are needed. [Display omitted] • Rapid, high throughput, small scale purification of recombinant fusion proteins. • Binding assays on filter paper disks. • Protein modification on filter paper disks. [ABSTRACT FROM AUTHOR]

Background: Carbohydrate binding modules (CBMs) bind polysaccharides and help target glycoside hydrolases catalytic domains to their appropriate carbohydrate substrates. To better understand how CBMs can improve cellulolytic enzyme reactivity, representatives from each of the 18 families of CBM found in Ruminoclostridium thermocellum were fused to the multifunctional GH5 catalytic domain of CelE (Cthe_0797, CelEcc), which can hydrolyze numerous types of polysaccharides including cellulose, mannan, and xylan. Since CelE is a cellulosomal enzyme, none of these fusions to a CBM previously existed. Results: CelEcc_CBM fusions were assayed for their ability to hydrolyze cellulose, lichenan, xylan, and mannan. Several CelEcc_CBM fusions showed enhanced hydrolytic activity with different substrates relative to the fusion to CBM3a from the cellulosome scaffoldin, which has high affinity for binding to crystalline cellulose. Additional binding studies and quantitative catalysis studies using nanostructure-initiator mass spectrometry (NIMS) were carried out with the CBM3a, CBM6, CBM30, and CBM44 fusion enzymes. In general, and consistent with observations of others, enhanced enzyme reactivity was correlated with moderate binding affinity of the CBM. Numerical analysis of reaction time courses showed that CelEcc_CBM44, a combination of a multifunctional enzyme domain with a CBM having broad binding specificity, gave the fastest rates for hydrolysis of both the hexose and pentose fractions of ionic-liquid pretreated switchgrass. Conclusion: We have shown that fusions of different CBMs to a single multifunctional GH5 catalytic domain can increase its rate of reaction with different pure polysaccharides and with pretreated biomass. This fusion approach, incorporating domains with broad specificity for binding and catalysis, provides a new avenue to improve reactivity of simple combinations of enzymes within the complexity of plant biomass. [ABSTRACT FROM AUTHOR]

The current study investigates the potential to increase the activity of a family 1 carbohydrate esterase on cellulose acetate through fusion to a family 3 carbohydrate binding module (CBM). Specifically, Ct CBM3 from Clostridium thermocellum was fused to the carboxyl terminus of the acetyl xylan esterase (AnAXE) from Aspergillus nidulans , and active forms of both AnAXE and AnAXE– Ct CBM3 were produced in Pichia pastoris . Ct CBM3 fusion had negligible impact on the thermostability or regioselectivity of AnAXE; activities towards acetylated corncob xylan, 4-methylumbelliferyl acetate, p -nitrophenyl acetate, and cellobiose octaacetate were also unchanged. By contrast, the activity of AnAXE– Ct CBM3 on cellulose acetate increased by two to four times over 24 h, with greater differences observed at earlier time points. Binding studies using microcrystalline cellulose (Avicel) and a commercial source of cellulose acetate confirmed functional production of the Ct CBM3 domain; affinity gel electrophoresis using acetylated xylan also verified the selectivity of Ct CBM3 binding to cellulose. Notably, gains in enzyme activity on cellulose acetate appeared to exceed gains in substrate binding, suggesting that fusion to Ct CBM3 increases functional associations between the enzyme and insoluble, high molecular weight cellulosic substrates. [ABSTRACT FROM AUTHOR]

Carbohydrate-binding modules (CBMs) are found within multi-modular polysaccharide degrading enzymes [glycoside hydrolases (GHs)]. CBMs play a critical role in the recognition of plant cell-wall polysaccharides and enhance the hydrolase activity of their cognate catalytic domains by increasing enzyme substrate proximity. Mimicking their role in Nature, we, in the present study, propose that CBMs may assist in vitro glycosynthase-catalysed polymerization reactions to produce artificial polysaccharides. Glycosynthases are GHs that have been engineered to catalyse glycoside bond formation for the synthesis of oligosaccharides, glycoconjugates and glycans. The degree of polymerization (DP) of the glycans generated is limited by the solubility of the polymeric product. In the present study, we have targeted the synthesis of artificial 1,3-1,4-β-glucans with a regular sequence using the glycosynthase E134S derived from a Bacillus licheniformis lichenase. We show that the addition of CBM11, which binds mixed-linked β-glucans, either as an isolated protein or fused to the glycosynthase E134S, has an effect on the DP of the polysaccharide products that is dependent on the rate of polymerization. The mechanism by which CBM influences the DP of the synthesized glycans is discussed. [ABSTRACT FROM AUTHOR]

The abundant polymer chitin can be degraded by chitinases (EC 3.2.1.14) and β-N-acetyl-hexosaminidases (EC 3.2.1.52) to oligosaccharides and N-acetyl-glucosamine (GlcNAc) monomers. Kinetic characterization of these enzymes requires product quantification by an assay method with a low detection limit, preferably compatible with the use of native, non-labeled substrates. Here we report a quantitative HPAEC-PAD method that allows fast separation of chitin oligosaccharides (COS) ranging from (GlcNac) 1–6 at detection limits of 1–3 pmol and a linear range of 5–250 pmol. Quantification under intra- and interday precision conditions was performed with 2.1–5.4% relative standard deviation (RSD) and 1.2–10.3% RSD, respectively. This method was successfully used for the determination of the kinetic parameters of the Aspergillus niger chitinase CfcI with native COS. CfcI was recently shown to release GlcNAc from the reducing end of COS, a new activity for fungal chitinases. A Carbohydrate Binding Module of family 18 (CBM18) is inserted in the CfcI catalytic domain. Site directed mutagenesis was used to assess the functionality of this CfcI-CBM18: four of its key amino acids were replaced by glycine residues, yielding CfcI SYNF . Comparison of the kinetic parameters of CfcI and CfcI SYNF confirmed that this CBM18 is functionally involved in catalysis. [ABSTRACT FROM AUTHOR]

In this study, a gene fragment coding carbohydrate-binding module 20 (CBM20) in the amylopullulanase (APU) gene was cloned from the hyperthermophilic bacteria Thermoanaerobacter pseudoethanolicus 39E and expressed in Escherichia coli. The protein, hereafter Tp39E, possesses very low sequence similarity with the CBM20s previously reported and has no starch binding site 2. Tp39E did not demonstrate thermal denaturation at 50 °C; however, thermal unfolding of the protein was observed at 59.5 °C. A binding assay with Tp39E was conducted using various soluble and insoluble substrates, and starch was the best binding polysaccharide. Intriguingly, Tp39E bound, to a lesser extent, to soluble and insoluble xylan as well. The dissociation constant ( K) and the maximum specific binding ( B) of Tp39E to corn starch granules were 0.537 μM and 5.79 μM/g, respectively, at pH 5.5 and 20 °C. APU with a Tp39E domain exhibited 2.2-fold greater activity than a CBM20-truncation mutant when starch granules were the substrate. Tp39E was an independently thermostable CBM and had a considerable effect on APU activity in the hydrolysis of insoluble substrates. [ABSTRACT FROM AUTHOR]

Covalent cross-links between chitin and glucan at the yeast cell wall are created by the transglycosylase activity of redundant proteins Crh1 and Crh2, with cleavage of β-1,4 linkages of the chitin backbone and transfer of the generated molecule containing newly created reducing end onto the glucan acceptor. A three-dimensional structure of Crh1 was generated by homology modeling based on the crystal structure of bacterial 1,3-1,4-β- D-glucanase, followed by site-directed mutagenesis to obtain molecular insights into how these enzymes achieve catalysis. The residues of both proteins that are involved in their catalytic and binding activities have been characterized by measuring the ability of yeast cells expressing different versions of these proteins to transglycosylate oligosaccharides derived from b-1,3-glucan, b-1,6-glucan and chitin to the chitin at the cell wall. Within the catalytic site, residues E134 and E138 of Crh1, as well as E166 and E170 of Crh2, corresponding to the nucleophile and general acid/base, and also the auxiliary D136 and D168 of Crh1 and Crh2, respectively, are shown to be essential for catalysis. Mutations of aromatic residues F152, Y160 and W219, located within the carbohydrate-binding cleft of the Crh1 model, also affect the transglycosylase activity. Unlike Crh1, Crh2 contains a putative carbohydrate-binding module (CBM18) of unknown function. Modeling and functional analysis of site-directed mutant residues of this CBM identified essential amino acids for protein folding and stability, as well as residues that tune the catalytic activity of Crh2. [ABSTRACT FROM AUTHOR]

Carrageenan is a generic name for a family of polysaccharides obtained from certain species of red algae. New methods to produce useful cost-efficiently materials from red algae are needed to convert enzymatic processes into fermentable sugars. In this study, we constructed chimeric genes cCgkA and cCglA containing the catalytic domain of κ-carrageenase CgkA and λ-carrageenase CglA from Pseudoalteromonas carrageenovora fused with a dockerin domain. Recombinant strains expressing the chimeric carrageenase resulted in a halo formation on the carrageenan plate by alcian blue staining. The recombinant cCgkA and cCglA were assembled with scaffoldin miniCbpA via cohesin and dockerin interaction. Carbohydrate binding module (CBM) in scaffoldin was used as a tag for cellulose affinity purification using cellulose as a support. The hydrolysis process was monitored by the amount of reducing sugar released from carrageenan. Interestingly, these results indicated that miniCbpA, cCgkA and cCglA assembled into a complex and that the dockerin-fused enzymes on the scaffoldin had synergistic activity in the degradation of carrageenan. The observed enhancement of activity by carrageenolytic complex was 3.1-fold-higher compared with the corresponding enzymes alone. Thus, the assemblies of advancement of active enzyme complexes will facilitate the commercial production of useful products from red algae biomass which represents inexpensive and sustainable feed-stocks. [ABSTRACT FROM AUTHOR]

Background: A critical aspect of plant infection by the majority of pathogens is penetration of the plant cell wall. This process requires the production and secretion of a broad spectrum of pathogen enzymes that target and degrade the many complex polysaccharides in the plant cell wall. As a necessary framework for a study of the expression of cell wall degrading enzymes (CWDEs) produced by the broad host range phytopathogen, Phytophthora parasitica, we have conducted an in-depth bioinformatics analysis of the entire complement of genes encoding CWDEs in this pathogen’s genome. Results: Our bioinformatic analysis indicates that 431 (2%) of the 20,825 predicted proteins encoded by the P. parasitica genome, are carbohydrate-active enzymes (CAZymes) involved in the degradation of cell wall polysaccharides. Of the 431 proteins, 337 contain classical N-terminal secretion signals and 67 are predicted to be targeted to the non-classical secretion pathway. Identification of CAZyme catalytic activity based on primary protein sequence is difficult, nevertheless, detailed comparisons with previously characterized enzymes has allowed us to determine likely enzyme activities and targeted substrates for many of the P. parasitica CWDEs. Some proteins (12%) contain more than one CAZyme module but, in most cases, multiple modules are from the same CAZyme family. Only 12 P. parasitica CWDEs contain both catalytically-active (glycosyl hydrolase) and non-catalytic (carbohydrate binding) modules, a situation that contrasts with that in fungal phytopathogens. Other striking differences between the complements of CWDEs in P. parasitica and fungal phytopathogens are seen in the CAZyme families that target cellulose, pectins or β-1,3-glucans (e.g. callose). About 25% of P. parasitica CAZymes are solely directed towards pectin degradation, with the majority coming from pectin lyase or carbohydrate esterase families. Fungal phytopathogens typically contain less than half the numbers of these CAZymes. The P. parasitica genome, like that of other Oomycetes, is rich in CAZymes that target β-1,3-glucans. Conclusions: This detailed analysis of the full complement of P. parasitica cell wall degrading enzymes provides a framework for an in-depth study of patterns of expression of these pathogen genes during plant infection and the induction or repression of expression by selected substrates. [ABSTRACT FROM AUTHOR]

Linear polysaccharides are typically composed of repeating mono- or disaccharide units and are ubiquitous among living organisms. Polysaccharide diversity arises from chain-length variation, branching, and additional modifications. Structural diversity is associated with various physiological functions, which are often regulated by cognate polysaccharide-binding proteins. Proteins that interact with linear polysaccharides have been identified or developed, such as galectins and polysaccharide-specific antibodies, respectively. Currently, data is accumulating on the three-dimensional structure of polysaccharide-binding proteins. These proteins are classified into two types: exo-type and endo-type. The former group specifically interacts with the terminal units of polysaccharides, whereas the latter with internal units. In this review, we describe the structural aspects of exo-type and endo-type protein-polysaccharide interactions. Further, we discuss the structural basis for affinity and specificity enhancement in the face of inherently weak binding interactions. [ABSTRACT FROM AUTHOR]

Highlights: [•] Variants of xynlanase Z of Clostridium thermocellum in combination with CBM6 and CBM22 were expressed in E. coli. [•] The construct with CBM22 showed 5-fold higher activity as compared to the one containing CBM6. [•] Location of the binding site inside a tunnel like structure of the CBM6 construct seemed to restrict the substrate binding. [•] The construct with CBM22 produced a more open structure, facilitating substrate binding and release of the product. [ABSTRACT FROM AUTHOR]

Abstract: The cellulosome is one of nature's most elegant and elaborate nanomachines and a key biological and biotechnological macromolecule that can be used as a multi-functional protein complex tool. Each protein module in the cellulosome system is potentially useful in an advanced biotechnology application. The high-affinity interactions between the cohesin and dockerin domains can be used in protein-based biosensors to improve both sensitivity and selectivity. The scaffolding protein includes a carbohydrate-binding module (CBM) that attaches strongly to cellulose substrates and facilitates the purification of proteins fused with the dockerin module through a one-step CBM purification method. Although the surface layer homology (SLH) domain of CbpA is not present in other strains, replacement of the cell surface anchoring domain allows a foreign protein to be displayed on the surface of other strains. The development of a hydrolysis enzyme complex is a useful strategy for consolidated bioprocessing (CBP), enabling microorganisms with biomass hydrolysis activity. Thus, the development of various configurations of multi-functional protein complexes for use as tools in whole-cell biocatalyst systems has drawn considerable attention as an attractive strategy for bioprocess applications. This review provides a detailed summary of the current achievements in Clostridium-derived multi-functional complex development and the impact of these complexes in various areas of biotechnology. [Copyright &y& Elsevier]

Highlights: [•] Intrafamily differences are found for C1 GH11 endo-xylanases. [•] GH11 endo-xylanases are influenced by solubility and molecular structure of xylan. [•] Valine instead of tyrosine at position 163 causes GH10-like degradation products. [•] GH11 xylanases release many small degradation products from self-associated xylans. [Copyright &y& Elsevier]

Highlights: [•] The wild-type and mutated CBMs were systematically studied by docking analysis. [•] A mutation affected the binding affinities of the CBMs to the cellulose surface. [•] A mutation also affected the directional preferences with respect to cellulose. [•] The affinities predicted for some of the CBMs were qualitatively in agreement with the observed adsorption behaviors of the CBMs. [•] The CBM mutants changed the interior hydrogen bond as well as those with cellulose. [Copyright &y& Elsevier]

Abstract: Cryptococcus sp. S-2 carboxymethyl cellulase (CSCMCase) is active in the acidic pH and lacks a binding domain. The absence of the binding domain makes the enzyme inefficient against insoluble cellulosic substrates. To enhance its binding affinity and its cellulolytic activity to insoluble cellulosic substrates, cellulose binding domain (CBD) of cellobiohydrolase I (CBHI) from Trichoderma reesei belonging to carbohydrate binding module (CBM) family 1 was fused at the C-terminus of CSCMCase. The constructed fusion enzymes (CSCMCase-CBD and CSCMCase-2CBD) were expressed in a newly recombinant expression system of Cryptococcus sp. S-2, purified to homogeneity, and then subject to detailed characterization. The recombinant fusion enzymes displayed optimal pH similar to those of the native enzyme. Compared with rCSCMCase, the recombinant fusion enzymes had acquired an increased binding affinity to insoluble cellulose and the cellulolytic activity toward insoluble cellulosic substrates (SIGMACELL® and Avicel) was higher than that of native enzyme, confirming the presence of CBDs improve the binding and the cellulolytic activity of CSCMCase on insoluble substrates. This attribute should make CSCMCase an attractive applicant for various application. [Copyright &y& Elsevier]

Abstract: The effect of lignin as an inhibitory biopolymer for the enzymatic hydrolysis of lignocellulosic biomass was studied; specially addressing the role of lignin in non-productive enzyme adsorption. Botanical origin and biomass pre-treatment give rise to differences in lignin structure and the effect of these differences on enzyme binding and inhibition were elucidated. Lignin was isolated from steam explosion (SE) pre-treated and non-treated spruce and wheat straw and used for the preparation of ultrathin films for enzyme binding studies. Binding of Trichoderma reesei Cel7A (CBHI) and the corresponding Cel7A-core, lacking the linker and the cellulose-binding domain, to the lignin films was monitored using a quartz crystal microbalance (QCM). SE pre-treatment altered the lignin structure, leading to increased enzyme adsorption. Thus, the positive effect of SE pre-treatment, opening the cell wall matrix to make polysaccharides more accessible, may be compromised by the structural changes of lignin that increase non-productive enzyme adsorption. [Copyright &y& Elsevier]

Background: The enzymatic hydrolysis step converting lignocellulosic materials into fermentable sugars is recognized as one of the major limiting steps in biomass-to-ethanol process due to the low efficiency of enzymes and their cost. Xylanases have been found to be important in the improvement of the hydrolysis of cellulose due to the close interaction of cellulose and xylan. In this work, the effects of carbohydrate-binding module (CBM family II) of the xylanase 11 from Nonomuraea flexuosa (Nf Xyn11) on the adsorption and hydrolytic efficiency toward isolated xylan and lignocellulosic materials were investigated. Results: The intact family 11 xylanase of N. flexuosa clearly adsorbed on wheat straw and lignin, following the Langmuir-type isotherm. The presence of the CBM in the xylanase increased the adsorption and hydrolytic efficiency on insoluble oat spelt xylan. But the presence of the CBM did not increase adsorption on pretreated wheat straw or isolated lignin. On the contrary, the CBM decreased the adsorption of the core protein to lignin containing substrates, indicating that the CBM of N. flexuosa xylanase did not contribute to the non-productive adsorption. Conclusion: The CBM of the N. flexuosa xylanase was shown to be a xylan-binding module, which had low affinity on cellulose. The CBM of the N. flexuosa xylanase reduced the non-specific adsorption of the core protein to lignin and showed potential for improving the hydrolysis of lignocellulosic materials to platform sugars. [ABSTRACT FROM AUTHOR]

Abstract: Various whole genome-sequencing projects in the nematode phylum have revealed the widespread occurrence of horizontal gene transfer from different sources. Pristionchus pacificus was the first non-plant parasitic nematode that was found to contain cellulase genes in its genome and to have cellulolytic activity when grown in a monoxenic culture on Escherichia coli. The P. pacificus reference strain PS312 has seven cellulase genes, all of which were acquired by horizontal gene transfer. Previous phylogenomic studies indicated that the acquisition occurred at the base of the genus Pristionchus and was followed by rapid gene duplications and gene turnover. However, little was known about the protein domain architecture, gene expression and the functionality of individual proteins. Here, we analyzed the protein domain architecture, studied the expression at various developmentally stages and tried to induce cellulase gene expression by feeding nematodes with different polysaccharides. Only two of the encoded proteins, Ppa-CEL-2 and Ppa-CEL-3, have a carbohydrate-binding module. Interestingly, these were also the ones with developmental gene expression regulation. Ppa-cel-2 shows high expression in larval and adult stages but is only low expressed in eggs, while Ppa-cel-3 is highly upregulated in adult worms but hardly detectable in any other stage. Ppa-CEL-1, has a catalytic domain similar to Ppa-CEL-2 and Ppa-CEL-3, but lacks a carbohydrate-binding module. The other four cellulases have a very low transcriptional expression correlating with putative incompleteness of their catalytic domain. While, the expression of none of the genes is inducible by polysaccharides, zymographic studies and mass spectrometry indicate that Ppa-CEL-2 and Ppa-CEL-3 are the only two cellulases contributing to cellulase activity in carboxymethylcellulose. Thus, the cellulases of P. pacificus differ in their protein domain architecture, gene expression and functionality. These results indicate that horizontal gene transfer-acquired genes undergo rapid evolutionary changes that affect all aspects of their molecular biology. [Copyright &y& Elsevier]

Abstract: Xylanases are mostly classified as belonging to glycoside hydrolase (GH) family 10 and 11, which differ in catalytic properties and structures. However, within one family, differences may also be present. The influence of solubility and molecular structure of substrates towards the efficiency of two GH10 xylanases from Myceliophthora thermophila C1 was investigated. The xylanases differed in degradation of high and low substituted substrate and the substitution pattern was an important factor influencing their efficiency. Alkali-labile interactions, as well as the presence of cellulose within the complex cell wall structure hindered efficient hydrolysis for both xylanases. The presence of a carbohydrate binding module did not enhance the degradation of the substrates. The differences in degradation could be related to the protein structure of the two xylanases. The study shows that the classification of enzymes does not predict their performance towards various substrates. [Copyright &y& Elsevier]

Abstract: In the cell walls of higher plants, cellulose chains are present in crystalline microfibril, with an amorphous part at the surface, or present as amorphous material. To assess the distribution and relative occurrence of the two forms of cellulose in the inflorescence stem of Arabidopsis, we used two carbohydrate-binding modules, CBM3a and CBM28, specific for crystalline and amorphous cellulose, respectively, with immunogold detection in TEM. The binding of the two CBMs displayed specific patterns suggesting that the synthesis of cellulose leads to variable nanodomains of cellulose structures according to cell type. In developing cell walls, only CBM3a bound significantly to the incipient primary walls, indicating that at the onset of its deposition cellulose is in a crystalline structure. As the secondary wall develops, the labeling with both CBMs becomes more intense. The variation of the labeling pattern by CBM3a between transverse and longitudinal sections appeared related to microfibril orientation and differed between fibers and vessels. Although the two CBMs do not allow the description of the complete status of cellulose microstructures, they revealed the dynamics of the deposition of crystalline and amorphous forms of cellulose during wall formation and between cell types adapting cellulose microstructures to the cell function. [Copyright &y& Elsevier]

The glycosyl hydrolase family 11, which is responsible for carbohydrate metabolism, was identified in the open reading frame (ORF) 6 of a xylanase positive clone from a fosmid library of rumen microbiota of Hu sheep. A BLASTP search of GenBank revealed that ORF6 encoded a 355-amino acid putative endoxylanase, having 61% similarity (e−73) to endo-1,4-β-xylanase of Fibrobacter succinogenes S85 (YP_003250510.1). Predicted with the SWISS-MODEL, there were two separate β-sandwich clusters linked with a high serine containing linker in ORF6. The N-terminal β-sandwich is a novel endoxylanase of the glycosyl hydrolase family 11 with a specific activity of 1150.00 U/mg. The optimal pH and temperature for this enzyme were shown to be pH 5.0 and 50°C, respectively. The C-terminal helped increase the stability of the xylanase but decreased the activity to some degree. The C-terminal β-sandwich could bind avicel, but no conserved domain could be found. It may be a novel carbohydrate-binding module. [ABSTRACT FROM PUBLISHER]

Starch exists typically as semicrystalline granules of varying size. Granule size plays an important role for many industrial starch applications. Microbial non-catalytic starch binding domains (SBD) exhibit an affinity for starch granules on their own. Three different constructs were introduced in the amylose-free potato cultivar (Solanum tuberosum L. cv. amf) to investigate whether it is possible to produce smaller starch granules by an engineered, high-affinity, tandem-repeats of a family 20 starch-binding domain (SBD3, SBD4 and SBD5). A significant reduction in the size of starch granule was achieved in transgenic potato plants. Furthermore, it was shown that the SBDn expression can affect physical processes underlying granule assembly and the poorly understood granule formation. Expression of multiple linked SBDs resulted in amalgamated starch granules that consisted of many smaller granules. No significant alterations were observed with regard to rheological properties of starch granules. [ABSTRACT FROM AUTHOR]

Abstract: The celB gene of Caldicellulosiruptor saccharolyticus was cloned and expressed in Escherichia coli to create a recombinant biocatalyst for hydrolyzing lignocellulosic biomass at high temperature. The GH5 domain of CelB hydrolyzed 4-nitrophenyl-β-d-cellobioside and carboxymethyl cellulose with optimum activity at pH 4.7–5.5 and 80°C. The recombinant GH5 and CBM3-GH5 constructs were both stable at 80°C with half-lives of 23h and 39h, respectively, and retained >94% activity after 48h at 70°C. Enzymatic hydrolysis of corn stover and cellulose pretreated with the ionic liquid 1-ethyl-3-methylimidazolium acetate showed that GH5 and CBM3-GH5 primarily produce cellobiose, with product yields for CBM3-GH5 being 1.2- to 2-fold higher than those for GH5. Confocal microscopy of bound protein on cellulose confirmed tighter binding of CBM3-GH5 to cellulose than GH5, indicating that the enhancement of enzymatic activity on solid substrates may be due to the substrate binding activity of CBM3 domain. [Copyright &y& Elsevier]

Abstract: Laforin is a unique human dual-specificity phosphatase as it contains an amino terminal carbohydrate binding module (CBM). Laforin gene mutations lead to Lafora disease, a progressive myoclonus epilepsy with an early fatal issue. Previous attempts to produce recombinant laforin faced various difficulties, namely the appearance of protein inclusion bodies, the contamination with bacterial proteins and a high tendency of the protein to aggregate, despite the use of fusion tags to improve solubility and ease the purification process. In this work, we have expressed human laforin in Escherichia coli in the form of inclusion bodies devoid of any fusion tags. After a rapid dilution refolding step, the protein was purified by two chromatographic steps, yielding 5–7mg of purified protein per liter of bacterial culture. The purified protein was shown to have the kinetic characteristics of a dual-specificity phosphatase, and a functional carbohydrate binding module. With this protocol, we were able for the first time, to produce and purify laforin without fusion tags in the amounts traditionally needed for the crystallographic structural studies paving the way to the understanding of the molecular mechanisms of laforin activity and to the development of novel therapies for Lafora disease. [Copyright &y& Elsevier]

Abstract: Saccharophagus degradans belongs to a recently discovered group of marine bacteria equipped with an arsenal of sugar cleaving enzymes coupled to carbohydrate-binding domains to degrade various insoluble complex polysaccharides. The modular Sde-1182 protein consists of a family 2 carbohydrate binding module linked to a X158 domain of unknown function. The 1.9Å and 1.55Å resolution crystal structures of the isolated X158 domain bound to the two related polyisoprenoid molecules, ubiquinone and octaprenyl pyrophosphate, unveil a β-barrel architecture reminiscent of the YceI-like superfamily that resembles the architecture of the lipocalin fold. This unprecedented association coupling oxidoreduction and carbohydrate recognition events may have implications for effective nutrient uptake in the marine environment. [Copyright &y& Elsevier]

Abstract: Scanty information is available regarding the chemical basis for structural alterations of the carbohydrate-binding modules (CBMs). The N-terminal starch binding domain (SBD) of Rhizopus oryzae glucoamylase (GA) forms fibrils under thermal stress, presenting an unusual conformational change from immunoglobulin-like to β-sheet-rich structure. Site-directed mutagenesis revealed that the C-terminal Lys of SBD played a crucial role in the fibril formation. The synthetic peptide (DNNNSANYQVSTSK) representing the C-terminal 14 amino acid residues of SBD was further demonstrated to act as a fibril-forming segment, in which terminal charges and an internal NNNxxNYQ motif were key fibril-forming determinants. The formation of fibril structure in a fungal SBD, caused by its chemical and biophysical requirements, was demonstrated for the first time. [Copyright &y& Elsevier]

A novel gene ( Ba- ega) of Bacillus sp. AC-1, encoding an endoglucanase ( Ba-EGA), was cloned and expressed in Escherichia coli. Ba- ega, containing a 1,980-bp open reading frame (ORF), encoded a protein of 659 amino acids and had a molecular mass of 74.87 kDa. Ba-EGA was a modular enzyme composed of a family-9 glycosyl hydrolase catalytic module (CM9) and a family-3 carbohydrate-binding module (CBM3). To investigate the functions of the CBM3 and CM9, a number of truncated derivatives of Ba-EGA were constructed, and all were active. The catalytic module (rCM9) alone was less stable at high temperature than the recombinant Ba-EGA (r Ba-EGA). The temperature stability for the complex of rCM9 and rCBM3 was still lower than r Ba-EGA, but higher than rCM9 alone. These observations indicated the existence of a non-covalent interaction between CM9 and CBM3 that might strengthen the stability of CM9. However, this interaction is not strong enough to mimic the protective effect of the CBM in the wild-type enzyme. [ABSTRACT FROM AUTHOR]

Abstract: Glycoside hydrolases (GHs) are diverse enzymes of biotechnological and medical importance. Bioinformatics contributes to our understanding of GH structure and function in various ways, including dissection of their typically modular structures and detection of the distant evolutionary relationships between families that often allow for prediction of catalytic sites. Here these twin strands are applied to the recently described GH98 family, the founder member of which is a blood group glycotope-cleaving endo-β-galactosidase of potential medical importance from Clostridium perfringens. Three domains can be discerned including a central catalytic TIM barrel domain in which putative catalytic residues can be assigned. Distant homologies and domain contexts suggest that the N-terminal domain is a novel carbohydrate binding module. [Copyright &y& Elsevier]

A gene encoding for xylanase activity in the rumen hemicellulolytic bacterium Eubacterium ruminantium was cloned into pBR322 in Escherichia coli ( E. coli ). The primary clone had a 5.7 kb insert produced by Eco RI partial digestion. Subcloning followed by sequencing allowed for the discovery that this enzyme has a glycosyl-hydrolase family 10 catalytic domain with a family 9 carbohydrate binding module at C-terminus and a region partially homologous to a family 22 carbohydrate binding module at N-terminus. Cloned xylanase is specifically active against xylan and oligoxyloside to produce xylobiose and xylotriose, showing optimal pH and temperature at 7.0 and 50°C, respectively. Molecular size of the xylanase (91 kDa) was confirmed by zymogram analysis of the E. coli clone, which agreed with the predicted size from the DNA sequence. Functions of the two modules at C- and N-termini were evaluated by using xylanase variants with and without the respective module and the C-terminal module was found to be functional in binding to acid-swollen cellulose and insoluble oat-spelt xylan, whereas the N-terminal module was inactive for binding them. [ABSTRACT FROM AUTHOR]

The family 10 xylanase from Streptomyces olivaceoviridis E-86 contains a (β/α)8-barrel as a catalytic domain, a family 13 carbohydrate binding module (CBM) as a xylan binding domain (XBD) and a Gly/Pro-rich linker between them. The crystal structure of this enzyme showed that XBD has three similar subdomains, as indicated by the presence of a triple-repeated sequence, forming a galactose binding lectin fold similar to that found in the ricin toxin B-chain. Comparison with the structure of ricin/lactose complex suggests three potential sugar binding sites in XBD. In order to understand how XBD binds to the xylan chain, we analyzed the sugar-complex structure by the soaking experiment method using the xylooligosaccharides and other sugars. In the catalytic cleft, bound sugars were observed in the xylobiose and xylotriose complex structures. In the XBD, bound sugars were identified in subdomains α and γ in all of the complexes with xylose, xylobiose, xylotriose, glucose, galactose and lactose. XBD binds xylose or xylooligosaccharides at the same sugar binding sites as in the case of the ricin/lactose complex but its binding manner for xylose and xylooligosaccharides is different from the galactose binding mode in ricin, even though XBD binds galactose in the same manner as in the ricin/galactose complex. These different binding modes are utilized efficiently and differently to bind the long substrate to xylanase and ricin-type lectin. XBD can bind any xylose in the xylan backbone, whereas ricin-type lectin recognizes the terminal galactose to sandwich the large sugar chain, even though the two domains have the same family 13 CBM structure. Family 13 CBM has rather loose and broad sugar specificities and is used by some kinds of proteins to bind their target sugars. In such enzyme, XBD binds xylan, and the catalytic domain may assume a flexible position with respect to the XBD/xylan complex, inasmuch as the linker region is unstructured. [Copyright &y& Elsevier]