Search

Background: Several studies have reported an increased tendency towards anger in patients with panic disorder (PD). If this propensity for anger arises from the pathological process of PD, it may be associated with the duration of the illness. The present study therefore examined the relationship between duration of PD and the personality tendency to experience anger in PD patients. Methods: Participants were 413 patients (132 men and 281 women; age = 38.7 years) with PD. Diagnoses were confirmed using the Mini-International Neuropsychiatric Interview. Illness duration ranged from less than a year to 51 years. After participants completed the Revised NEO Personality Inventory, we examined the association between illness duration and the Angry Hostility and Impulsiveness subscale scores. In the analysis, participants were divided into two groups by duration of illness (long group, n = 186 and short group, n = 200) using the median value (9 years) as a cut-off because of the skewed distribution of the duration. Patients with an illness duration of 9 years (n = 27) were excluded from the comparison. Results: The duration of illness was significantly correlated with the Angry Hostility score (p = 0.002) after controlling for age. Scores were significantly higher in the long group than in the short group (p = 0.04). No significant association was observed between Impulsiveness scores and duration of illness. Conclusion: The present study suggests that longer PD duration is related to a stronger tendency to experience anger. [ABSTRACT FROM AUTHOR]

The article reports on research and development activities undertaken by system integration company NTT DATA regarding software reuse techniques. Topics discussed include failures attributed to the inherent difficulty of reutilizing software and the emerging trends in big data. The use of software repository mining and the development of methods for applying this bug module prediction technique to quality management in the system development stages are also mentioned.

The article discusses Nippon Telegraph and Telephone (NTT) DATA's research and development activities on reusing software assets. Topics covered include how successful methods reuse target components of the software infrastructure such as small common libraries and frameworks for routine processing and the transformation of reuse technologies with big data of software development assets.

A depth of interaction detector is developed for the next generation of positron emission tomography (PET) scanners. The detector unit consists of 8 × 8 crystal blocks with four layers of 2 × 2 Gd2 SiO5:Ce arrays coupled to a 52 mm square position sensitive photomultiplier tube (PS-PMT). Each scintillation event is mapped in a two-dimensional (2-D) position histogram through the relative ratio of the output signals of the PS-PMT. To facilitate high spatial resolution imaging, accurate crystal identification is needed. A statistical model based on the approach of a Gaussian mixture model (GMM) is introduced for crystal identification. In the GMM, a cluster center and range attributed to individual peaks in the 2-D position histogram are defined. GMM can simultaneously estimate overlapping regions projected each crystal element. After block separation of 8 × 8 on the 2-D distribution, the crystal element regions are identified by the GMM in each block. The GMM method is applied two times, once for the cluster centers and once for determination of the range. These results are used to generate a look-up-table (LUT). This method successfully identified all crystal elements in the clustering area. By Monte Carlo simulation, we also proved that GMM method could choose LUT patterns to high resolution or high sensitivity with one parameter. [ABSTRACT FROM AUTHOR]

A strong demand is expected for high-sensitivity, high-resolution and low-cost brain positron emission tomography (PET) imaging for early diagnosis of dementia, as well as for general neuroscience studies. Therefore, we have proposed novel geometries of a hemisphere detector arrangement for high-sensitivity brain imaging, in which an add-on detector at the chin position or neck position helps in sensitivity uniformity improvement. In this study, we developed the first prototype system for proof-of-concept using four-layer depth-of-interaction detectors, each of which consisted of 16  ×  16  ×  4 Zr-doped GSO crystals with dimensions of 2.8  ×  2.8  ×  7.5 mm3 and a high-sensitivity 64-channel flat-panel photomultiplier tube. We used 47 detectors to form a hemisphere detector with a hemisphere shape of 25 cm inner diameter and 50 cm outer diameter, and we used seven detectors for each of the add-on detectors. The total detector number of 54 was about one-fourth that of a typical whole-body PET scanner. The hemisphere detector for the prototype system was realized by multiple rings having different numbers of detectors and a cross-shaped top detector unit covering the top. Performance evaluation showed uniform spatial resolutions of 3–4 mm by the filtered back-projection method. Imaging tests of a hot-rod phantom done with an iterative method were able to resolve 2.2 mm rods. Peak sensitivity was measured as more than 10% at a region near the top of the head, which was achieved with the help of the top detector unit. In addition, using the prototype system, we performed the first FDG clinical test with a healthy volunteer. The results showed that the proposed geometries had high potential for realizing high-sensitivity, high-resolution, and low-cost brain PET imaging. As for the add-on detector position, it was shown that the neck position resulted in higher sensitivity and wider field of view (FOV) than the chin position because the add-on detector at the neck position can be placed continuously to the hemisphere detector and close to the FOV. [ABSTRACT FROM AUTHOR]

Depth of interaction (DOI) information is indispensable to improving the sensitivity and spatial resolution of positron emission tomography (PET) systems, especially for small field-of-view PET such as small animal PET and human brain PET. We have already developed a series of X’tal cube detectors for isotropic spatial resolution and we obtained the best isotropic resolution of 0.77 mm for detectors with six-sided readout. However, it is still challenging to apply the detector for PET systems due to the high cost of six-sided readout electronics and carrying out segmentation of a monolithic cubic scintillator in three dimensions using the subsurface laser engraving (SSLE) technique. In this work, we propose a more practical X’tal cube with a two-sided readout detector, which is made of crystal bars segmented in the height direction only by using the SSLE technique. We developed two types of prototype detectors with a 3 mm cubic segment and a 1.5 mm cubic segment by using 3  ×  3  ×  20 mm3 and 1.5  ×  1.5  ×  20 mm3 crystal bars segmented into 7 and 13 DOI segments, respectively, using the SSLE technique. First, the performance of the detector, composed of one crystal bar with different DOI segments and two thorough silicon via (TSV) multi-pixel photon counters (MPPCs) as readout at both ends of the crystal bar, were evaluated in order to demonstrate the capability of the segmented crystal bars as a DOI detector. Then, performance evaluation was carried out for a 4  ×  4 crystal array of 3  ×  3  ×  20 mm3 with 7 DOI segments and an 8  ×  8 crystal array of 1.5  ×  1.5  ×  20 mm3 with 13 DOI segments. Each readout included a 4  ×  4 channel of the 3  ×  3 mm2 active area of the TSV MPPCs. The three-dimensional position maps of the detectors were obtained by the Anger-type calculation. All the segments in the 4  ×  4 array were identified very clearly when there was air between the crystal bars, as each crystal bar was coupled to one channel of the MPPCs; however, it was necessary to optimize optical conditions between crystal bars for the 8  ×  8 array because of light sharing between crystal bars coupled to one channel of the MPPCs. The optimization was performed for the 8  ×  8 array by inserting reflectors fully or partially between the crystal bars and the best crystal identification performance was obtained with the partial reflectors between the crystal bars. The mean energy resolutions at the 511 keV photo peak for the 4  ×  4 array with air between the crystal bars and for the 8  ×  8 array with partial reflectors between the crystal bars were 10.1%  ±  0.3% and 10.8%  ±  0.8%, respectively. Timing resolutions of 783  ±  36 ps and 1.14  ±  0.22 ns were obtained for the detectors composed of the 4  ×  4 array and the 8  ×  8 array with partial reflectors, respectively. These values correspond to single photon timing resolutions. Practical X’tal cubes with 3 mm and 1.5 mm DOI resolutions and two-sided readout were developed. [ABSTRACT FROM AUTHOR]

In this paper, to further understand the bending failure mechanism of a bridge footing subjected to lateral seismic loading, the effect of pile arrangement on the bending performance of a footing is mainly investigated by parametric analysis. The pile location can considerably affect the bending failure pattern of the footing by constraining the extent of yielding of footing top bars. The piles placed at the center of the sides parallel to the loading direction can constrain the extent of yielding of the top bars in the loading direction. Similarly, the piles at the center of the sides perpendicular to the loading direction can constrain the extent of yielding of the top bars in the other direction. The center pile can constrain the extent of yielding of the top bars in two directions. Additionally, based on the analytical results of the parametric analysis, the application condition of the current beam theory-based design method expected to accurately evaluate the footing bending capacity is discussed from the aspect of pile spacing. [ABSTRACT FROM AUTHOR]

The single-ring OpenPET (SROP), for which the detector arrangement has a cylinder shape cut by two parallel planes at a slant angle to form an open space, is our original proposal for in-beam PET. In this study, we developed a small prototype of an axial-shift type SROP (AS-SROP) with a novel transformable architecture for a proof-of-concept. In the AS-SROP, detectors originally forming a cylindrical PET are axially shifted little by little. We designed the small AS-SROP prototype for 4-layer depth-of-interaction detectors arranged in a ring diameter of 250 mm. The prototype had two modes: open and closed. The open mode formed the SROP with the open space of 139 mm and the closed mode formed a conventional cylindrical PET. The detectors were simultaneously moved by a rotation handle allowing them to be transformed between the two modes. We evaluated the basic performance of the developed prototype and carried out in-beam imaging tests in the HIMAC using 11C radioactive beam irradiation. As a result, we found the open mode enabled in-beam PET imaging at a slight cost of imaging performance; the spatial resolution and sensitivity were 2.6 mm and 5.1% for the open mode and 2.1 mm and 7.3% for the closed mode. We concluded that the AS-SROP can minimize the decrease of resolution and sensitivity, for example, by transforming into the closed mode immediately after the irradiation while maintaining the open space only for the in-beam PET measurement. [ABSTRACT FROM AUTHOR]

Time-of-flight (TOF) is now a standard technology for positron emission tomography (PET), but its effective use for small diameter PET systems has not been studied well. In this paper, we simulated a brain-dedicated TOF-PET system with a hemispherical detector arrangement. We modeled a Hamamatsu TOF-PET module (C13500-4075LC-12) with 280 ps coincidence resolving time (CRT), in which a 12  ×  12 array of multi pixel photon counters (MPPCs) is connected to a lutetium fine silicate (LFS) crystal array of 4.1  ×  4.1 mm2 cross section each, based on one-to-one coupling. On the other hand, spatial resolution degradation due to the parallax error should be carefully addressed for the small diameter PET systems. The ideal PET detector would have both depth-of-interaction (DOI) and TOF capabilities, but typical DOI detectors that are based on light sharing tend to degrade TOF performance. Therefore, in this work, we investigated non-DOI detectors with an appropriate crystal length, which was a compromise between suppressed parallax error and decreased sensitivity. Using GEANT4, we compared two TOF detectors, a 20 mm long non-DOI and a 10 mm long non-DOI, with a non-TOF, 4-layer DOI detector with a total length of 20 mm (i.e. 5  ×  4 mm). We simulated a contrast phantom and evaluated the relationship between the contrast recovery coefficient (CRC) and the noise level (the coefficient of variation, COV) for reconstructed images. The 10 mm long non-DOI, which reduces the parallax error at the cost of sensitivity loss, showed better imaging quality than the 20 mm long non-DOI. For example, the CRC value of a 10 mm hot sphere at COV  =  20% was 72% for the 10 mm long non-DOI, which was 1.2 times higher than that of the 20 mm long non-DOI. The converged CRC values for the 10 mm long non-DOI were almost equivalent to those of the non-TOF 4-layer DOI, and the 10 mm long non-DOI converged faster than the non-TOF 4-layer DOI did. Based on the simulation results, we evaluated a one-pair prototype system of the TOF-PET detectors with 10 mm crystal length, which yielded the CRT of 250  ±  8 ps. In summary, we demonstrated support for feasibility of the brain-dedicated TOF-PET system with the hemispherical detector arrangement. [ABSTRACT FROM AUTHOR]

Some recently developed brain-dedicated positron emission tomography (PET) scanners measure subjects in a sitting position. Sitting enables PET scanning under more natural conditions for the subjects and also helps with making the scanners smaller. It is unclear, however, how much the degree of head motion when sitting differs from the supine posture commonly employed in clinical PET. In this report, we describe development of a markerless and contactless head motion tracking system and a study of healthy volunteers in several different postures to determine the optimum posture for brain PET. We used Kinect® (Microsoft) and developed software that can measure head motion with about 1 mm (translation) and less than 1° (rotation) accuracy. In the volunteer study, we measured the amount of head motion, with and without head fixation, in supine, normal sitting, and reclining postures. The results indicated that the normal sitting posture without head fixation had the largest head movement, and that the reclining and supine postures were similarly effective for minimizing head movement (average head movement of about 0.5 mm during 1 min). We also visualized the influence that head motion had on images for each pose by simulating the actual motions obtained from the volunteer study using a digital Hoffman phantom. Comparisons with the original image showed that the extent to which motion was reduced in the reclining and supine postures were quantitatively equivalent. The head motions of the volunteer studies were also reproduced using a mannequin head on a motorized stage to assess how well the proposed motion measurement system worked when used for motion correction. The results indicated that even though the system improved image quality for all postures, the reclining and supine postures could provide better image quality than the normal sitting posture. [ABSTRACT FROM AUTHOR]

There is a growing interest in developing brain PET scanners with high sensitivity and high spatial resolution for early diagnosis of neurodegenerative diseases and studies of brain functions. Sensitivity of the PET scanner can be improved by increasing the solid angle. However, conventional PET scanners are designed based on a cylindrical geometry, which may not be the most efficient design for brain imaging in terms of the balance between sensitivity and cost. We proposed a dedicated brain PET scanner based on a hemispheric shape detector and a chin detector (referred to as the helmet-chin PET), which is designed to maximize the solid angle by increasing the number of lines-of-response in the hemisphere. The parallax error, which PET scanners with a large solid angle tend to have, can be suppressed by the use of depth-of-interaction detectors. In this study, we carry out a realistic evaluation of the helmet-chin PET using Monte Carlo simulation based on the 4-layer GSO detector which consists of a 16  ×  16  ×  4 array of crystals with dimensions of 2.8  ×  2.8  ×  7.5 mm3. The purpose of this simulation is to show the gain in imaging performance of the helmet-chin PET compared with the cylindrical PET using the same number of detectors in each configuration. The sensitivity of the helmet-chin PET evaluated with a cylindrical phantom has a significant increase, especially at the top of the (field-of-view) FOV. The peak-NECR of the helmet-chin PET is 1.4 times higher compared to the cylindrical PET. The helmet-chin PET provides relatively low noise images throughout the FOV compared to the cylindrical PET which exhibits enhanced noise at the peripheral regions. The results show the helmet-chin PET can significantly improve the sensitivity and reduce the noise in the reconstructed images. [ABSTRACT FROM AUTHOR]

Simultaneous measurements of multiple physiological parameters are essential for the study of brain disease mechanisms and the development of suitable therapies to treat them. In this study, we developed a measurement system for simultaneous optical imaging and PET for awake mice. The key elements of this system are the OpenPET, optical imaging and fixation apparatus for an awake mouse. The OpenPET is our original open-type PET geometry, which can be used in combination with another device because of the easily accessible open space of the former. A small prototype of the axial shift single-ring OpenPET was used. The objective lens for optical imaging with a mounted charge-coupled device camera was placed inside the open space of the AS-SROP. Our original fixation apparatus to hold an awake mouse was also applied. As a first application of this system, simultaneous measurements of cerebral blood flow (CBF) by laser speckle imaging (LSI) and [11C]raclopride-PET were performed under control and 5% CO2 inhalation (hypercapnia) conditions. Our system successfully obtained the CBF and [11C]raclopride radioactivity concentration simultaneously. Accumulation of [11C]raclopride was observed in the striatum where the density of dopamine D2 receptors is high. LSI measurements could be stably performed for more than 60 minutes. Increased CBF induced by hypercapnia was observed while CBF under the control condition was stable. We concluded that our imaging system should be useful for investigating the mechanisms of brain diseases in awake animal models. [ABSTRACT FROM AUTHOR]

In dose verification techniques of particle therapies based on in-beam positron emission tomography (PET), the causes of washout of positron emitters by physiological effects should be clarified to correct washout for accurate verification. As well, the quantitative washout rate has a potential usefulness as a diagnostic index which should be explored. Therefore, we measured washout rates of rat brain after vasodilator acetazolamide loading to investigate the possible effects of blood flow on washout. Six rat brains were irradiated by a radioisotope 11C beam and time activity curves on the whole brains were obtained with a small single-ring OpenPET prototype. Then, washout rates were calculated with the Mizuno model, where two washout rates (k2m and k2s) were assumed, and a two-compartment model including efflux from tissue to blood (k2) and influx (k3) and efflux (k4) between the two tissue compartments. Before the irradiations, we used laser-Doppler flowmetry to confirm that acetazolamide increased cerebral blood flow (CBF) of a rat. We compared means of k2m, k2s and k2, k3 and k4 without acetazolamide loading (Rest) and with acetazolamide loading (ACZ). For all k values, ACZ values were lower than Rest values. In other words, though CBF increased, washout rates were decreased. This may be attributed to the implanted 11C reacting to form 11CO2. Because acetazolamide increased the concentration of CO2 in brain, suppressed diffusion of 11CO2 and decomposition of 11CO2 into ions were prevented. [ABSTRACT FROM AUTHOR]

Insertion sequences (ISs) are the simplest transposable elements and are widely distributed in bacteria; however, they also play important roles in genome evolution. We recently identified a protein called IS excision enhancer (IEE) in enterohemorrhagic Escherichia coli (EHEC) O157. IEE promotes the excision of IS elements belonging to the IS3 family, such as IS629, as well as several other families. IEE-mediated IS excision generates various genomic deletions that lead to the diversification of the bacterial genome. IEE has been found in a broad range of bacterial species; however, among sequenced E. coli strains, IEE is primarily found in EHEC isolates. In this study, we investigated non-EHEC pathogenic E. coli strains isolated from domestic animals and found that IEE is distributed in specific lineages of enterotoxigenic E. coli (ETEC) strains of serotypes O139 or O149 isolated from swine. The iee gene is located within integrative elements that are similar to SpLE1 of EHEC O157. All iee-positive ETEC lineages also contained multiple copies of IS629, a preferred substrate of IEE, and their genomic locations varied significantly between strains, as observed in O157. These data suggest that IEE may have been transferred among EHEC and ETEC in swine via SpLE1 or SpLE1-like integrative elements. In addition, IS629 is actively moving in the ETEC O139 and O149 genomes and, as in EHEC O157, is promoting the diversification of these genomes in combination with IEE. [ABSTRACT FROM AUTHOR]

We are developing a novel, general purpose isotropic-3D PET detector X'tal cube which has high spatial resolution in all three dimensions. The research challenge for this detector is implementing effective detection of scintillation photons by covering six faces of a segmented crystal block with silicon photomultipliers (SiPMs). In this paper, we developed the second prototype of the X'tal cube for a proof-of-concept. We aimed at realizing an ultimate detector with 1.0 mm3 cubic crystals, in contrast to our previous development using 3.0 mm3 cubic crystals. The crystal block was composed of a 16 x 16 x 16 array of lutetium gadolinium oxyorthosilicate (LGSO) crystals 0.993 x 0.993 x 0.993 mm3 in size. The crystals were optically glued together without inserting any reflector inside and 96 multi-pixel photon counters (MPPCs, S10931-50P, i.e. six faces each with a 4 x 4 array of MPPCs), each having a sensitive area of 3.0 x 3.0 mm2, were optically coupled to the surfaces of the crystal block. Almost all 4096 crystals were identified through Anger-type calculation due to the finely adjusted reflector sheets inserted between the crystal block and light guides. The reflector sheets, which formed a belt of 0.5 mm width, were placed to cover half of the crystals of the second rows from the edges in order to improve identification performance of the crystals near the edges. Energy resolution of 12.7% was obtained at 511 keV with almost uniform light output for all crystal segments thanks to the effective detection of the scintillation photons. [ABSTRACT FROM AUTHOR]

The distribution of fragmentation products predicted by Monte Carlo simulations of heavy ion therapy depend on the hadronic physics model chosen in the simulation. This work aims to evaluate three alternative hadronic inelastic fragmentation physics options available in the Geant4 Monte Carlo radiation physics simulation framework to determine which model most accurately predicts the production of positron-emitting fragmentation products observable using in-beam PET imaging. Fragment distributions obtained with the BIC, QMD, and INCL + + physics models in Geant4 version 10.2.p03 are compared to experimental data obtained at the HIMAC heavy-ion treatment facility at NIRS in Chiba, Japan. For both simulations and experiments, monoenergetic beams are applied to three different block phantoms composed of gelatin, poly(methyl methacrylate) and polyethylene. The yields of the positron-emitting nuclei 11C, 10C and 15O obtained from simulations conducted with each model are compared to the experimental yields estimated by fitting a multi-exponential radioactive decay model to dynamic PET images using the normalised mean square error metric in the entrance, build up/Bragg peak and tail regions. Significant differences in positron-emitting fragment yield are observed among the three physics models with the best overall fit to experimental 12C and 16O beam measurements obtained with the BIC physics model. [ABSTRACT FROM AUTHOR]

In advanced ion therapy, the visualization of the range of incident ions in a patient’s body is important for exploiting the advantages of this type of therapy. It is ideal to use radioactive ion beams for in-beam positron emission tomography (PET) imaging in particle therapy due to the high quality of PET images caused by the high signal-to-noise ratio. We have shown the feasibility of this idea through an in-beam PET study for 11C and 15O ion beams using the dedicated OpenPET system. In this work, we investigate the potential difference between the Bragg peak position and the position of the maximum detected positron-emitting fragments by a PET system for the radioactive beams of 11C and 15O. For this purpose, we measured the depth dose in a water phantom and performed PET scans of an irradiated PMMA phantom for the available beams of 11C and 15O at the Heavy Ion Medical Accelerator in Chiba (HIMAC). Then, we simulated the depth dose profiles in the water phantom and the yield of the positron-emitting fragments in a PMMA phantom for both available beams using the Monte Carlo code PHITS. The positions of the Bragg peak and maximum positron-emitting fragments from the measurements were well reproduced by simulation. The effect of beam energy broadening on the positional differences between two peaks was studied by simulating an irradiated PMMA phantom. The differences in position between the Bragg peak and the maximum positron-emitting fragments increased when the beam energy spread was broadened, although the differences were zero for the ideal mono-energetic beams. Greater differences were observed for 11C ion beams compared to 15O ion beams, although both beams had the same range in water, and the higher energy corresponded to a larger difference. For the known energy spread of the beams, the predicted differences between two peaks from the simulation were consistent with the measured data within submillimetre agreement. [ABSTRACT FROM AUTHOR]

Parallax error caused by the detector crystal thickness degrades spatial resolution at the peripheral regions of the field-of-view (FOV) of a scanner. To resolve this issue, depth-of-interaction (DOI) measurement is a promising solution to improve the spatial resolution and its uniformity over the entire FOV. Even though DOI detectors have been used in dedicated systems with a small ring diameter such as for the human brain, breast and small animals, the use of DOI detectors for a large bore whole-body PET system has not been demonstrated yet. We have developed a four-layered DOI detector, and its potential for a brain dedicated system has been proven in our previous development. In the present work, we investigated the use of the four-layer DOI detector for a large bore PET system by developing the world’s first whole-body prototype. We evaluated its performance characteristics in accordance with the NEMA NU 2 standard. Furthermore, the impact of incorporating DOI information was evaluated with the NEMA NU 4 image quality phantom. Point source images were reconstructed with a filtered back projection (FBP), and an average spatial resolution of 5.2  ±  0.7 mm was obtained. For the FBP image, the four-layer DOI information improved the radial spatial resolution by 48% at the 20 cm offset position. The peak noise-equivalent count rate (NECR) was 22.9 kcps at 7.4 kBq ml−1 and the scatter fraction was 44%. The system sensitivity was 5.9 kcps MBq−1. For the NEMA NU 2 image quality phantom, the 10 mm sphere was clearly visualized without any artifacts. For the NEMA NU 4 image quality phantom, we measured the phantom at 0, 10 and 20 cm offset positions. As a result, we found the image with four-layer DOI could visualize the 2 mm-diameter hot cylinder although it could not be recognized on the image without DOI. The average improvements in the recovery coefficients for the five hot rods (1–5 mm) were 0.3%, 4.4% and 26.3% at the 0, 10 and 20 cm offset positions, respectively (except for the 1 mm-diameter rod at the 20 cm offset position). Although several practical issues (such as adding end-shields) remain to be addressed before the scanner is ready for clinical use, we showed that the four-layer DOI technology provided higher and more uniform spatial resolution over the FOV and improved contrast for small uptake regions located at the peripheral FOV, which could improve detectability of small and distal lesions such as nodal metastases, especially in obese patients. [ABSTRACT FROM AUTHOR]

The accumulation of induced radioactivity within in-beam PET scanner scintillators is of concern for its long-term clinical usage in particle therapy. To estimate the effects on OpenPET which we are developing for in-beam PET based on GSOZ (Zi doped Gd2SiO5), we measured the induced radioactivity of GSO activated by secondary fragments in a water phantom irradiation by a 12C beam with an energy of 290 MeV u−1. Radioisotopes of Na, Ce, Eu, Gd, Nd, Pm and Tb including positron emitters were observed in the gamma ray spectra of the activated GSO with a high purity Ge detector and their absolute radioactivities were calculated. We used the Monte Carlo simulation platform, Geant4 in which the observed radioactivity was assigned to the scintillators of a precisely reproduced OpenPET and the single and coincidence rates immediately after one treatment and after one-year usage were estimated for the most severe conditions. Comparing the highest coincidence rate originating from the activated scintillators (background) and the expected coincidence rate from an imaging object (signal), we determined the expected signal-to-noise ratio to be more than 7 within 3 min and more than 10 within 1 min from the scan start time. We concluded the effects of scintillator activation and their accumulation on the OpenPET imaging were small and clinical long-term usage of the OpenPET was feasible. [ABSTRACT FROM AUTHOR]

Positron annihilation spectroscopy (PAS) spectra of biological tissue in 11C irradiation are reported and spatial resolution coefficient of positron emission tomography (PET) obtained from the PAS spectrum is discussed for 11C irradiation. A PAS spectrum of the biological tissue with water is the same as that of the water pool phantom in 11C irradiation. However, a PAS spectrum of the biological tissue with less water differs from that of the water pool phantom. The PET spatial resolution coefficient depends on the kind of biological tissue. However, the PET spatial resolution coefficient, 0.00243  ±  0.00014, can be used as a common value of maximum limit. [ABSTRACT FROM AUTHOR]