Search

To meet the demands of the manufacturing industry, a more robust approach is needed for current manufacturing processes. Machining of very hard materials with excellent dimensional accuracy and surface integrity is a challenging task, Currently, the electrical discharge machining (EDM) process is the optimal solution for machining such materials. Electrical discharge drilling machines find applications in various sectors such as aerospace, automobile and medicine. In this research, two different brass electrode geometries are considered: tubular electrode tool (TET) and double D tubular electrode tool (DDTET) on an SS202 work-piece. The input parameters of peak current (PI), pulse time ON (PONT), and pulse time OFF (POFFT) were varied. The output response measured and compared were material removal rate (MRR) and over cut (OC). The Taguchi technique was used to design the l16 orthogonal array (OA) experiment, and analysis of variance (ANOVA) was employed for result analysis using Minitab20 statistical software package. The results showed that the DDTET method produced significantly better MRR and OC improvements of 21.66 % and 2.28 % respectively. Additionally, a study was conducted on the formation of the recast layer (RL) and the heat affected zone (HAZ). [ABSTRACT FROM AUTHOR]

This work aims to optimize the machining parameters and study the effect of powder-mixed dielectric fluid on the electrical discharge machining (EDM) process. The TOPSIS method of optimization is adopted to identify the optimal machining parameters. HCHCr die steel is preferred as a machining material. Due to their hard and ductile nature, Ni, Zr, and Ni+Zr were selected as powder inclusion in dielectric fluid. An L9 array Taguchi DOE is preferred to perform the experiments with parameters like peak off time, pulse off time, and pulse current. TOPSIS study revealed that the third level of powder dielectric fluid (Ni+Zr), 7A peak current, 9 µs pulse on time, and 2 µs pulse off time were specified as the optimal condition. Pulse on time (Ton) significantly impacted metal removal rate and surface roughness while machining operation on HCHCr die steel. SEM analysis was done to find the effect of powder-mixed dielectric fluid, while EDAX analysis was done to ensure the presence of powder inclusion. [ABSTRACT FROM AUTHOR]