Search

Gold colloids are the object of many studies as they are reported to have potential biological sensing, imaging and drug delivery applications. In the presence of certain amino acids the aggregation of the gold nanoparticles into linear structures is observed, as highlighted by the appearance of a second plasmon band in the UV–Vis spectra of the colloid. The mechanism behind this phenomenon is still under debate. In order to help elucidate this issue, the interaction between gold colloids and different amino acids, modified amino acids and molecules mimicking their side-chain was monitored by UV–Vis absorption, DLS and TEM. The results show that phenomenon can be rationalized in terms of the Diffusion Limited Colloid Aggregation (DLCA) model which gives rise to the fractal aggregation colloids. The global charge of the compound, which influences the ionic strength of the solution, and the ease with which the compound can interact with the GNPs and affect their surface potential, are, the two parameters which control the DLCA regime. Calculations based on the Derjaguin, Landau, Verwey and Overbeek (DLVO) theory confirm all the experimental observations. [ABSTRACT FROM AUTHOR]

Abstract: Traditionally most pharmaceutical excipients used for peroral dosage forms have been considered to be inert, although they have been known to play an important role in governing the release of the active pharmaceutical ingredient (API) required for the desired therapeutic effect. Of considerable interest is the emerging data demonstrating that many of these “inert” excipients may produce subtle changes that could directly or indirectly alter the activity of membrane-spanning proteins such as transporters. In this way, excipients could be altering the overall ADMET properties of an incorporated drug thereby affecting its intended therapeutic efficacy and/or enhancing adverse side effects. Therefore, given this recent evidence, it seems necessary to review what has been reported in the literature on interactions of excipients with human physiological entities, particularly transporters. As of today, safety/toxicity evaluations are typically based on the appearance of gross morphological changes rather than the effects on a cellular level, the ability of excipients in modifying the pharmacological activity of an active drug could lead to toxicity evaluation in routine for each additive used in oral formulations. Further knowledge on this subject will enable formulators to make more rational decisions in dosage form design and will help answer the question of whether certain excipients should be considered active pharmaceutical components of formulations. [Copyright &y& Elsevier]

Abstract: Tobramycin dry powder formulations were evaluated by gamma scintigraphy and pharmacokinetic methods. In an open single-dose, three-treatment, three-period, cross-over study, nine cystic fibrosis patients received both the two test products and the reference product Tobi® (nebulizer solution) in order to assess lung deposition and systemic comparative bioavailability of the two investigational inhaled products versus the marketed inhaled comparator product. The percentage of dose (mean±SD) in the whole lung was 53.0±10.0% for the tobramycin Form 1, 34.1±12.4% for the tobramycin Form 2 and 7.6±2.7% for the comparator product Tobi®. Lung deposition expressed as a percentage of the nominal dose was thus estimated to be 7.0 and 4.5 times higher for the Tobra Form 1 and Tobra Form 2 than for the Tobi®, respectively. Furthermore, the systemic bioavailability (adjusted to correspond to the same drug dose as that of the comparator product deposited in the lung) was found to be 1.6 times higher for the comparator product Tobi® than for the two DPI formulations. The principal advantages of the DPI formulations include reduced systemic availability and thus, side effects, and higher dose levels of the drug at the site of drug action. [Copyright &y& Elsevier]

Nose-to-brain delivery is a promising way to improve the treatment of central nervous system disorders, as it allows the bypassing of the blood–brain barrier. However, it is still largely unknown how the anatomy of the nose can influence the treatment outcome. In this work, we used 3D printing to produce nasal replicas based on 11 different CT scans presenting various anatomical features. Then, for each anatomy and using the Design of Experiments methodology, we characterised the amount of a powder deposited in the olfactory region of the replica as a function of multiple parameters (choice of the nostril, device, orientation angle, and the presence or not of a concomitant inspiration flow). We found that, for each anatomy, the maximum amount of powder that can be deposited in the olfactory region is directly proportional to the total area of this region. More precisely, the results show that, whatever the instillation strategy, if the total area of the olfactory region is below 1500 mm2, no more than 25% of an instilled powder can reach this region. On the other hand, if the total area of the olfactory region is above 3000 mm2, the deposition efficiency reaches 50% with the optimal choice of parameters, whatever the other anatomical characteristics of the nasal cavity. Finally, if the relative difference between the areas of the two sides of the internal nasal valve is larger than 20%, it becomes important to carefully choose the side of instillation. This work, by predicting the amount of powder reaching the olfactory region, provides a tool to evaluate the adequacy of nose-to-brain treatment for a given patient. While the conclusions should be confirmed via in vivo studies, it is a first step towards personalised treatment of neurological pathologies. [ABSTRACT FROM AUTHOR]

Graphical abstract Abstract Nasal delivery offers many benefits over other conventional routes of delivery (e.g. oral or intravenous administration). Benefits include, among others, a fast onset of action, non-invasiveness and direct access to the central nervous system. The nasal cavity is not only limited to local application (e.g. rhinosinusitis) but can also provide direct access to other sites in the body (e.g. the central nervous system or systemic circulation). However, both the anatomy and the physiology of the nose impose their own limitations, such as a small volume for delivery or rapid mucociliary clearance. To meet nasal-specific criteria, the formulator has to complete a plethora of tests, in vitro and ex vivo , to assess the efficacy and tolerance of a new drug-delivery system. Moreover, depending on the desired therapeutic effect, the delivery of the drug should target a specific pathway that could potentially be achieved through a modified release of this drug. Therefore, this review focuses on specific techniques that should be performed when a nasal formulation is developed. The review covers both the tests recommended by regulatory agencies (e.g. the Food and Drug Administration) and other complementary experiments frequently performed in the field. [ABSTRACT FROM AUTHOR]

Phage therapy is recognized to be a promising alternative to fight antibiotic-resistant infections. In the quest for oral dosage forms containing bacteriophages, the utilization of colonic-release Eudragit® derivatives has shown potential in shielding bacteriophages from the challenges encountered within the gastrointestinal tract, such as fluctuating pH levels and the presence of digestive enzymes. Consequently, this study aimed to develop targeted oral delivery systems for bacteriophages, specifically focusing on colon delivery and employing Eudragit® FS30D as the excipient. The bacteriophage model used was LUZ19. An optimized formulation was established to not only preserve the activity of LUZ19 during the manufacturing process but also ensure its protection from highly acidic conditions. Flowability assessments were conducted for both capsule filling and tableting processes. Furthermore, the viability of the bacteriophages remained unaffected by the tableting process. Additionally, the release of LUZ19 from the developed system was evaluated using the Simulator of the Human Intestinal Microbial Ecosystem (SHIME®) model. Finally, stability studies demonstrated that the powder remained stable for at least 6 months when stored at +5 °C. [ABSTRACT FROM AUTHOR]

Furosemide is a diuretic frequently used in the therapeutic management of edema associated with cardiac, renal, and hepatic failure and hypertension. However, there are a very low number of pharmaceutical dosage forms containing furosemide that are suitable for children under 6- years old. Therefore, there is a real need to develop hospital preparations, especially in the hospital. Four oral pediatric solutions of furosemide (2 mg/Ml) were formulated. Two of those solutions did not contain ethanol. For each formulation, 12 batches of 1600.0 Ml were prepared and packaged in 250.0 Ml brown glass bottles with polypropylene screw caps. The physicochemical properties (visual appearance, pH, osmolarity, drug content) and microbiological quality of the finished product were determined on the freshly prepared solutions and after 90 days of storage at 30°C/65% RH. The physicochemical and microbiological characteristics of the freshly prepared solutions were within the prescribed specifications. After 90 days of storage at 30°C/65% RH, the solutions containing sucrose and those without ethanol showed a slight decrease in pH and furosemide content of about 2.5%–4.5% (w/w). Despite this slight decrease, the characteristics remained within the prescribed specifications. Based on the stability profile of the ethanol-free solution containing sorbitol, it could be implemented in hospitals for the care of pediatric patients. [ABSTRACT FROM AUTHOR]

In this study, the possibility of producing highly antibody-loaded microparticles with sustained-release properties was evaluated. Polyclonal immunoglobulin G (IgG) was used as a model of antibody and its encapsulation into poly(lactide-co-glycolide) acid (PLGA) microparticles was performed by spray-drying a water-in-oil (w/o) emulsion. It was demonstrated that the use of the Resomer® RG505 PLGA allowed an IgG loading of 20% w/w with an encapsulation efficiency higher than 85%. The produced microparticles were characterized by a mean diameter lower than 10 µm. The burst effect was shown to reach a maximal value of 40%. IgG stability after encapsulation was also assessed. The use of this single PLGA provided a lag time of 3 months which dramatically slowed down the release rate after the initial release of the encapsulated IgG. Using blends of PLGA characterized by different inherent viscosities allowed decreasing the lag time and modulating the dissolution profile of the IgG from the spray-dried microparticles. Therefore, spray-drying a water-in-oil emulsion appeared to be a promising strategy to produce highly antibody-loaded microparticles characterized by sustained-release properties. [ABSTRACT FROM AUTHOR]

The nose-to-brain delivery of ghrelin loaded in liposomes is a promising approach for the management of cachexia. It could limit the plasmatic degradation of ghrelin and provide direct access to the brain, where ghrelin’s specific receptors are located. Anionic liposomes coated with chitosan in either a liquid or a dry-powder formulation were compared. The powder formulation showed stronger adhesion to mucins (89 ± 4% vs 61 ± 4%), higher ghrelin entrapment efficiency (64 ± 2% vs 55 ± 4%), higher enzymatic protection against trypsin (26 ± 2% vs 20 ± 3%) and lower ghrelin storage degradation at 25 °C (2.67 ± 1.1% vs 95.64 ± 0.85% after 4 weeks). The powder formulation was also placed in unit-dose system devices that were able to generate an appropriate aerosol characterized by a Dv50 of 38 ± 6 µm, a limited percentage of particles smaller than 10 µm of 4 ± 1% and a reproducible mass delivery (CV: 1.49%). In addition, the device was able to deposit a large amount of powder (52.04% w/w) in the olfactory zone of a 3D-printed nasal cast. The evaluated combination of the powder formulation and the device could provide a promising treatment for cachexia. [ABSTRACT FROM AUTHOR]

Hybrid lipid bilayers are a particular case of supported lipid bilayers with the two monolayer leaflets composed by different types of molecules. These nanostructures can be produced in a well-controlled array fashion and are suitable for the study of biomembrane-related phenomena via electrochemical or plasmonic sensing. Understanding how the underlying solid surface affects the supported membrane formation and organization is necessary for the potential use of these hybrid platforms in applications for which surfaces are not flat and topographically complex. Here we assess the role of lipid phase, substrate surface energy and topography on the formation and stability of hybrid supported membranes from vesicle precursors using complementary surface-sensitive techniques, namely quartz crystal microbalance with dissipation and atomic force microscopy. The stability of hybrid bilayers against thermal and osmotic changes is evaluated and compared to standard supported lipid bilayers formed onto hydrophilic SiO 2. Force spectroscopy measurements reveal an overall weaker lateral organization of hybrid membranes as a result of the underlying self-assembled monolayer being not optimally organized. Hybrid bilayers display a decoupled behavior between the two leaflets when vertically compressed at constant speed. On microcontact printed Au surfaces, hybrid bilayers were formed over printed patches, while surprisingly, supported lipid bilayers were observed on non-patterned Au regions suggesting a non-trivial self-assembled monolayer reorganization when in aqueous environment. [Display omitted] • Polar component of the substrate surface energy modulates effective formation of supported lipid bilayers. • Gel phase or gel domains preclude global lipid vesicle rupture. • Hybrid lipid bilayers exhibit decoupled nanomechanical responses. • Spatially controlled hybrid and pure lipid bilayers coexist on micropatterned Au surfaces. [ABSTRACT FROM AUTHOR]

Validating numerical models against experimental models of nasal spray deposition is challenging since many aspects must be considered. That being said, it is a critical step in the product development process of nasal spray devices. This work presents the validation process of a nasal deposition model, which demonstrates a high degree of consistency of the numerical model with experimental data when the nasal cavity is segmented into two regions but not into three. Furthermore, by modelling the flow as stationary, the computational cost is drastically reduced while maintaining quality of particle deposition results. Thanks to this reduction, a sensitivity analysis of the numerical model could be performed, consisting of 96 simulations. The objective was to quantify the impact of four inputs: the spray half cone angle, mean spray exit velocity, breakup length from the nozzle exit and the diameter of the nozzle spray device, on the three quantities of interest: the percentage of the accumulated number of particles deposited on the anterior, middle and posterior sections of the nasal cavity. The results of the sensitivity analysis demonstrated that the deposition on anterior and middle sections are sensitive to injection angle and breakup length, and the deposition on posterior section is only, but highly, sensitive to the injection velocity. [Display omitted] [ABSTRACT FROM AUTHOR]

Validating numerical models against experimental models of nasal spray deposition is challenging since many aspects must be considered. That being said, it is a critical step in the product development process of nasal spray devices. This work presents the validation process of a nasal deposition model, which demonstrates a high degree of consistency of the numerical model with experimental data when the nasal cavity is segmented into two regions but not into three. Furthermore, by modelling the flow as stationary, the computational cost is drastically reduced while maintaining quality of particle deposition results. Thanks to this reduction, a sensitivity analysis of the numerical model could be performed, consisting of 96 simulations. The objective was to quantify the impact of four inputs: the spray half cone angle, mean spray exit velocity, breakup length from the nozzle exit and the diameter of the nozzle spray device, on the three quantities of interest: the percentage of the accumulated number of particles deposited on the anterior, middle and posterior sections of the nasal cavity. The results of the sensitivity analysis demonstrated that the deposition on anterior and middle sections are sensitive to injection angle and breakup length, and the deposition on posterior section is only, but highly, sensitive to the injection velocity. [Display omitted] [ABSTRACT FROM AUTHOR]

This study aimed to evaluate glycerol monooleate (GMO) as a carrier to develop viscoelastic and injectable sustained-release drug delivery systems. The potential pro- and antioxidant activity of the developed hydrolipidic gels were evaluated by measuring the production of ROS by polymorphonuclear leukocytes (PMNs). In addition, the biocompatibility and effectiveness of two selected gel candidates were evaluated in vivo by evaluating the benefit of a single intraarticular injection of these new treatments in a model of osteoarthritis in rabbits. The in vitro study demonstrated that the carrier F1 did not have a pro-oxidative effect and even protected PMNs against natural auto-activation, regardless of the incorporation of either clonidine chlorhydrate or betamethasone dipropionate. The in vivo study demonstrated that F1 and F1-BDP induced a loss of cartilage quality in comparison to the control and reference groups but that the lesions of cartilage observed were generally mild, with not much full-depth erosion. Moreover, no exacerbating inflammation was observed when considering the synovial membranes and the PGE2 and CRP levels. These results seemed to demonstrate that the sustained-release formulation based on GMO could be well-tolerated after intraarticular injection. Moreover, it could have the potential to prevent inflammatory conditions while sustaining drug activity locally over weeks. [ABSTRACT FROM AUTHOR]

[Display omitted] Insomnia is a chronic disorder with a mean prevalence ranged from 6% to 15% worldwide. The usual pharmacologic treatment for insomnia has been benzodiazepines and barbiturates. More recently, z-drugs were introduced in the therapeutic arsenal to maximize benefits and minimize treatment damage. Zolpidem tartrate, whose primary indication is for sleep initiation problems, is conventionally used at a recommended dose of 5 mg for women as well as elderly patients (<65 years-old) and 10 mg for non-elderly men. However, it was demonstrated that the dose of zolpidem should be adjusted according to the gender, age, condition of the patient and the presence of polypharmacy to decrease the occurrence of adverse events. Faced with the therapeutic limitations inherent to marketed products, magistral preparations offer medical and legal alternatives to mass treatment. The use of a semi-automatic technique, with standardized protocol, such as 3D printing should be advantageously implemented as an alternative to standard compounding procedures. In this work, the pressure-assisted microsyringes method was selected as it allows the tridimensional printing, and so the customization of the dose, by easily extruding a viscous semi-liquid material, called "slurry", through a syringe at room temperature. It has been demonstrated that this methodology allows obtaining printlets that responded to the zolpidem-containing tablets monograph of the US pharmacopoeia Edition 42. The compounding preparations proposed in this work therefore have the same criteria of requirements as a commercial form. [ABSTRACT FROM AUTHOR]

This work investigated the possibility of using the biodegradable gentamicin-monoolein-water gels as models, in order to obtain a similar sustained release of ciprofloxacin hydrochloride. Four gels containing antibiotics were prepared and were examined with regard to their physicochemical properties and in vitro drug release characteristics. Ciprofloxacin, unlike gentamicin, which was dissolved in the matrix, was in dispersed form. However, despite its insolubility, microscopic observation, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and X-ray diffraction showed that the developed gel was in the cubic liquid crystalline structure and have maintained their ability to progressively release ciprofloxacin. ciprofloxacin-monoolein-water (5:80:15% w/w), which released in vitro approximately 85% of ciprofloxacin after 16 days could possibly be considered as an alternative to a gentamicin-monoolein-water gel for the treatment of chronic osteomyelitis. [ABSTRACT FROM AUTHOR]

Abstract: Antibodies (Abs) are prone to a variety of physical and chemical degradation pathways, which require the development of stable formulations and specific delivery strategies. In this study, injectable biodegradable and biocompatible polymeric particles were employed for controlled-release dosage forms and the encapsulation of antibodies into polylactide-co-glycolide (PLGA) based microspheres was explored. In order to avoid stability issues which are commonly described when water-in-oil (w/o) emulsion is used, a solid-in-oil-in-water (s/o/w) method was developed and optimized. The solid phase was made of IgG microparticles and the s/o/w process was evaluated as an encapsulation method using a model Ab molecule (polyclonal bovine immunoglobulin G (IgG)). The methylene chloride (MC) commonly used for an encapsulation process was replaced by ethyl acetate (EtAc), which was considered as a more suitable organic solvent in terms of both environmental and human safety. The effects of several processes and formulation factors were evaluated on IgG:PLGA microsphere properties such as: particle size distribution, drug loading, IgG stability, and encapsulation efficiency (EE%). Several formulations and processing parameters were also statistically identified as critical to get reproducible process (e.g. the PLGA concentration, the volume of the external phase, the emulsification rate, and the quantity of IgG microparticles). The optimized encapsulation method has shown a drug loading of up to 6% (w/w) and an encapsulation efficiency of up to 60% (w/w) while preserving the integrity of the encapsulated antibody. The produced microspheres were characterized by a d(0.9) lower than 110μm and showed burst effect lower than 50% (w/w). [Copyright &y& Elsevier]

Context: The release of an encapsulated drug is dependent on diffusion and/or degradation/erosion processes. Objective: This work aimed to better understand the degradation mechanism of clonidine-loaded microparticles. Methods: Gel permeation chromatography was used to evaluate the degradation of the polymer. The water-uptake and the weight loss were determined gravimetrically. The swelling behaviour and the morphological changes of the formulations were observed by microscopy. The glass transition temperature and the crystallinity were also determined by differential scanning calorimetry and X-ray diffraction, respectively. The pH of the medium and inside the microspheres was assessed. Results: The microspheres captured a large amount of water, allowing a decrease in the molecular weight of the polymer. The pH of the medium decreased after release of the degradation products and the pH inside the microparticles remained constant due to the neutralization of these acidic products. Conclusion: Clonidine and buffers both had an action on the degradation. [ABSTRACT FROM AUTHOR]

[Display omitted] In the pharmaceutical field, there is a growing interest in manufacturing of drug delivery dosage forms adapted to the needs of a large variety of patients. 3D printing has proven to be a powerful tool allowing the adaptation of immediate drug delivery dosage forms. However, there are still few studies focusing on the adaptation of long-acting dosage forms for patient suffering of neurological diseases. In this study, paliperidone palmitate (PP) was chosen as a model drug in combination with different polymers adapted for fused-deposition modeling (FDM). The impact of different printing parameters on the release of PP were investigated. The layer thickness and the infill percentage were studied using a quality by design approach. Indeed, by defining the critical quality attributes (CQA), a proof of concept of a prediction system, and a quality control system were studied through designs of experiments (DoE). The first part of this study was dedicated to the release of PP from a fix geometry. In the second part, the prediction system was developed to require only surface and surface to volume ratio. From that point, it was possible to get rid of a fix geometry and predict the amount of PP released from complex architectures. [ABSTRACT FROM AUTHOR]

[Display omitted] In this work, two technologies were used to prepare long-acting implantable dosage forms in the treatment of schizophrenia. Hot-melt extrusion (HME) as well as fused deposition modelling (FDM) were used concomitantly to create personalized 3D printed implants. Different formulations were prepared using an amorphous PLA as matrix polymer and different solid-state plasticizers. Paliperidone palmitate (PP), a heat sensitive drug prescribed in the treatment of schizophrenia was chosen as model drug. After extrusion, different formulations were characterized using DSC and XRD. Then, an in vitro dissolution test was carried out to discriminate the formulation allowing a sustained drug release of PP. The formulation showing a sustained drug release of the drug was 3D printed as an implantable dosage form. By modulating the infill, the release profile was related to the proper design of tailored dosage form and not solely to the solubility of the drug. Indeed, different release profiles were achieved over 90 days using only one formulation. In addition, a stability test was performed on the 3D printed implants for 3 months. The results showed the stability of the amorphous state of PP, independently of the temperature as well as the integrity of the matrix and the drug. [ABSTRACT FROM AUTHOR]

Objectives The plasma pharmacokinetic profile in CD-1 mice of a novel 18β-glycyrrhetinic acid ( GA) derivative, which displays in vitro anti-cancer activity, was assessed. Methods This study involved an original one-step synthesis of N-(2-{3-[3,5-bis(trifluoromethyl)phenyl]ureido}ethyl)-glycyrrhetinamide, ( 2) a compound that displays marked anti-proteasome and anti-kinase activity. The bioselectivity profile of 2 on human normal NHDF fibroblasts vs human U373 glioblastoma cells was assessed. Maximal tolerated dose ( MTD) profiling of 2 was carried out in CD1 mice, and its serum pharmacokinetics were profiled using an acute intravenous administration of 40 mg/kg body weight. Key findings Compound 2 displayed IC50 in vitro growth inhibitory concentrations of 29 and 8 μ m on NHDF fibroblasts and U373 glioblastoma cells, respectively, thus a bioselectivity index of ∼4. The intravenous pharmacokinetic parameters revealed that 2 was rapidly distributed (t1/2dist of ∼3 min) but slowly eliminated (t1/2elim = ∼77 min). Conclusions This study describes an original and reliable nanoemulsion of a GA derivative with both anti-proteasome and anti-kinase properties and that should be further tested in vivo using various human xenograft or murine syngeneic tumour models with both single and chronic intravenous administration. [ABSTRACT FROM AUTHOR]

Abstract: This work describes the encapsulation of a small, hydrophilic molecule (clonidine) into a PLGA matrix to provide sustained release over more than one month after intra-articular administration. The microparticles were prepared using a double emulsion (w1/o/w2) method followed by evaporation of the organic solvent. To optimize the efficiency of encapsulation and the mean size of the microparticles, which was targeted around 30μm, the following parameters were modulated: the viscosity and the volume of the organic phase, the molecular weight of the polymer, the volume of the internal and external aqueous phases, the drug loading, the concentration of surfactant, and the stirring parameters. Blends of polymers characterized by different molecular weights (34000–96000Da) as well as copolymers of PLGA–PEG were used to enhance the entrapment of the drug. The pH of the aqueous phases was adjusted to obtain suitable encapsulation efficiency. Characterization was made of the physico-chemical properties of the microparticles, such as their crystallinity (DSC and PXRD) and microstructure (SEM). When performing in vitro dissolution studies, controlled release for up to approximately 30days was achieved with several of the formulations developed. Diffusion was found to be the dominant drug release mechanism at early time points. [Copyright &y& Elsevier]

Abstract: The aim of this study was to evaluate the ability of the Penn-Century Dry Powder Insufflator for mice (DP-4M®) to reproducibly, uniformly, and deeply deliver dry powders for inhalation in the mouse lung. Itraconazole-based dry powder formulations produced by spray-drying were different in terms of composition (different ratios of drug and mannitol, with or without phospholipids), but relatively similar in terms of particle size and mass median aerodynamic diameter. The ability of the dry powder insufflator to disaggregate each formulation was the same, indicated by the absence of a statistically significant difference between the particle size distribution parameters, as measured by laser scattering. The emitted fraction varied in vivo compared to the in vitro condition. Fluorescent particle distribution in the lungs was uniform and reached the alveolar spaces, as visualized by fluorescent microscopy. In terms of drug recovery in lung tissue, a minimum administered powder mass (in this case ∼1mg) was necessary to recover at least 30% of the emitted dose in the lung and to obtain reproducible pulmonary concentrations. To reduce the dose administered in the lung, it was preferable to dilute the active ingredient within the carrier instead of reducing the dry powder mass inserted in the sampling chamber. Dry powder insufflators are devices usable in dose-dependent preclinical trials but have critical parameters to efficiently deliver reproducible doses depending on the type of formulation. [Copyright &y& Elsevier]

In the present study, we evaluated the effect of spray-drying formulations and operating parameters of a laboratory-scale spray-dryer on the characteristics of spray-dried powders containing two Pseudomonas aeruginosa bacteriophages exhibiting different morphotypes: a podovirus (LUZ19) and a myovirus (14-1). We optimized the production process for bacteriophage-loaded powders, with an emphasis on long-term storage under ICH (international conference on harmonization) conditions. D-trehalose-/L-isoleucine-containing bacteriophage mixtures were spray-dried from aqueous solutions using a Büchi Mini Spray-dryer B-290 (Flawil, Switzerland). A response surface methodology was used for the optimization of the spray-drying process, with the following as-evaluated parameters: Inlet temperature, spray gas flow rate, and the D-trehalose/L-isoleucine ratio. The dried powders were characterized in terms of yield, residual moisture content, and bacteriophage lytic activity. L-isoleucine has demonstrated a positive impact on the activity of LUZ19, but a negative impact on 14-1. We observed a negligible impact of the inlet temperature and a positive correlation of the spray gas flow rate with bacteriophage activity. After optimization, we were able to obtain dry powder preparations of both bacteriophages, which were stable for a minimum of one year under different ICH storage conditions (up to and including 40 °C and 75% relative humidity). [ABSTRACT FROM AUTHOR]

[Display omitted] • A framework to develop nose-to-brain drugs combining pharmaceutics and engineering. • The importance of the pre-formulation for safe, stable and efficient formulation. • The selection of the administration device to target the olfactory zone. • The 3D-printing of nasal casts to check the suitability of formulation properties. This review aims to cement three hot topics in drug delivery: (a) the pre-formulation of new products intended for nose-to-brain delivery; (b) the development of nasal casts for studying the efficacy of potential new nose-to-brain delivery systems at the early of their development (pre-formulation); (c) the use of 3D printing based on a wide variety of materials (transparent, biocompatible, flexible) providing an unprecedented fabrication tool towards personalized medicine by printing nasal cast on-demand based on CT scans of patients. This review intends to show the links between these three subjects. Indeed, the pathway selected to administrate the drug to the brain not only influence the formulation strategies to implement but also the design of the cast, to get the most convincing measures from it. Moreover, the design of the cast himself influences the choice of the 3D-printing technology, which, in its turn, bring more constraints to the nasal replica design. Consequently, the formulation of the drug, the cast preparation and its realisation should be thought of as a whole and not separately. [ABSTRACT FROM AUTHOR]

[Display omitted] In this work, the versatility of pressure extrusion-based printing (PEBP) was used as 3D printing process to create long-acting implantable dosage forms. Different release profiles were achieved based on the drug concentration, the way of preparation and the design of the final implants. Polycaprolactone (PCL) was used as the polymer to sustain the release of the loaded drug. Paliperidone palmitate (PP), a BCS Class II drug, used in the treatment of schizophrenia, was used as the model drug. Two PP concentrations (e.g. 5 and 10% w/w) as well as two methods of preparation before the 3D printing process, mortar and pestle and cryogenic milling, were evaluated. The amorphous state of PP was obtained by using cryogenic milling and it was maintained after printing. Two designs were printed by PEBP, a ring and a disk, to evaluate their impact on the release profile of PP. During the in vitro dissolution tests, the implant design, the amount of PP, as well as the crystalline or amorphous state of PP have shown to influence the drug release profile. During the successive steps of preparation of the long-acting implants, blends and raw materials were characterized by DSC and XRD. [ABSTRACT FROM AUTHOR]

The interest in nano-sized lipid vesicles in nano-biotechnology relies on their use as mimics for endosomes, exosomes, and nanocarriers for drug delivery. The interactions between nanoscale size lipid vesicles and cell membranes involve spontaneous interbilayer lipid transfer by several mechanisms, such as monomer transfer or hemifusion. Experimental approaches toward monitoring lipid transfer between nanoscale-sized vesicles typically consist of transfer assays by fluorescence microscopy requiring the use of labels or calorimetric measurements, which in turn require a large amount of sample. Here, the capability of a label-free surface-sensitive method, quartz crystal microbalance with dissipation monitoring (QCM-D), was used to monitor lipid transfer kinetics at minimal concentrations and to elucidate how lipid physicochemical properties influence the nature of the transfer mechanism and dictate its dynamics. By studying time-dependent phase transitions obtained from nanoviscosity measurements, the transfer rates (unidirectional or bidirectional) between two vesicle populations consisting of lipids with the same head group and differing alkyl chain length can be estimated. Lipid transfer is asymmetric and unidirectional from shorter-chain lipid donor vesicles to longer-chain lipid acceptor vesicles. The transfer is dramatically reduced when the vesicle populations are incubated at temperatures below the melting of one of the vesicle populations. [ABSTRACT FROM AUTHOR]

The purpose of this work was to investigate the feasibility to manufacture enteric capsules, which could be used in compounding pharmacies, by fused-deposition modeling. It is well-known that conventional enteric dip coating of capsules in community pharmacies or hospitals is a time-consuming process which is characterized by an erratic efficacy. Fused-deposition modeling was selected as a potential 3D printing method due its ease and low-cost implementation. Before starting to print the capsules, an effective sealing system was designed via a computer-aided design program. Hot melt extrusion was used to make printable enteric filaments. They were made of the enteric polymer, a plasticizer and a thermoplastic polymer, namely Eudragit® L100-55, polyethylene glycol 400 and polylactic acid, respectively. Riboflavine-5′-phosphate was selected as a coloured drug model to compare the efficacy of the 3D printed capsules to that of enteric dip coated capsules as they are currently produced in community pharmacies and hospitals. Different parameters of fabrication which could influence the dissolution profile of the model drug, such as the layer thickness or post-processing step, were studied. It was demonstrated that our 3D printed enteric capsules did not release the drug for 2 h in acid medium (pH 1.2). However, they completely dissolved within 45 min at pH 6.8 which allowed the release of a minimal amount of 85% w/w of drug as it was recommended by the European Pharmacopoeia 9th Edition for enteric products. [ABSTRACT FROM AUTHOR]

Modified-release oral dosage forms are commonly used in pharmaceutics to delay or sustain the release of drugs. Nowadays, they are only marketed as solid dosage forms such as capsules or tablets. Therefore, the development of a liquid oral dosage form with modified-release properties has been keenly awaited to increase the compliance of patients with a swallowing impairment, such as paediatric, older or critically ill patients. In this study, a new technology has been developed that consists of multi-layered particles suspended extemporaneously in a syrup, using omeprazole as a model drug. The coating procedure was optimized to obtain a yield of minimum 90% w/w and a mean diameter below 500 µm. Eudragit® E100 and Eudragit® L100-55 were used to prevent the early release of omeprazole in the syrup and in the acidic environment of the stomach, respectively. These polymers allowed the stability of the coated particles to be ensured when dispersed in a liquid and the enteric release of the drug to be targeted. It was demonstrated that our new system presented similar release performances to existing marketed enteric dosage forms. It is able to protect omeprazole for 2 h in acidic medium at pH 1.2, while omeprazole was entirely released at pH 6.8 within 45 min. Once the final suspension is prepared extemporaneously, it presents sufficient stability to guarantee the administration of multiple doses filled into a syrup bottle and kept for a limited storage time at room temperature (e.g. up to 10 doses to be administered within 10 days). [ABSTRACT FROM AUTHOR]

Graphical abstract [ABSTRACT FROM AUTHOR]