Search

Applying atmospherically plasma-sprayed (APS) Mn1.0Co1.9Fe0.1O4 (MCF) protective coatings on interconnector steels minimized the chromium-related degradation within solid oxide fuel cell stack-tests successfully. Post-test characterization of the coatings disclosed a severe microstructural and phase evolution. A self-healing of micro-cracks, the formation and agglomeration of small pores, the occurrence of a dense spinel layer at the surface and a strong elemental de-mixing were reported in ex situ experiments. In the present publication, we prove for the first time these mechanisms by tracking the microstructure in situ at a single APS coating using synchrotron X-ray nano-tomography at the European Synchrotron Radiation Facility. Therefore, a 100-µm-long cylindrical sample with a diameter of 123 µm was cut from an APS-MCF free-standing layer and measured within a high-temperature furnace. All microstructural changes mentioned above could be verified. Porosity measurements reveal a decrease in the porosity from 9 to 3% during the annealing, which is in good accordance with the literature. Additionally, a partial detachment of an approximately 5-µm-thick layer at the sample surface is observed. The layer is dense and does not exhibit any cracks which are penetrating the layer. This kind of shell is assumed to be gastight and thus protecting the bulk from further oxidation. [ABSTRACT FROM AUTHOR]

Abstract Dense protective layers are needed to reduce chromium-related degradation in SOFC stacks. In particular, atmospheric plasma sprayed (APS) Mn 1.0 Co 1.9 Fe 0.1 O 4 (MCF) coatings demonstrated low degradation rates in stack tests. We show that short-term annealing in air induces crack healing within these coatings. Parallel to this effect, a phase transformation is observed originating from oxidation that proceeds by solid state-diffusion. The present contribution reveals the basic mechanisms of the microstructural and phase changes of coatings in long-term annealing tests of up to 10,000 h at 700 °C. The layer develops differently at the air-facing surface and in the bulk. Due to cation deficiency, oxidation is dominated by cation outward diffusion, leading to a Co-enriched surface layer. The bulk displays a fine distribution of the initial (rock salt) and the final (spinel) phases. Understanding the mechanisms leading to these irreversible changes enables predictions to be made concerning durable protectivecoatings in SOFCs. [ABSTRACT FROM AUTHOR]

Dense coatings on metallic interconnectors are necessary to suppress chromium poisoning of SOFC cathodes. Atmospherically plasma sprayed (APS) Mn 1.0 Co 1.9 Fe 0.1 O 4 (MCF) protective layers demonstrated reduced chromium related degradation in laboratory and stack tests. Previous analyses revealed strong microstructural changes comparing the coating's as-sprayed and operated condition. This work concentrates on the layer-densification and crack-healing observed by annealing APS-MCF in air, which simulates the cathode operation conditions. The effect is described by a volume expansion induced by a phase transformation. Reducing conditions during the spray process lead to a deposition of the MCF in a metastable rock salt configuration. Annealing in air activates diffusion processes for a phase transformation to the low temperature stable spinel phase (T < 1050 °C). This transformation is connected to an oxygen incorporation which occurs at regions facing high oxygen partial pressures, as there are the sample surface, cracks and pore surfaces. Calculations reveal a volume expansion induced by the oxygen uptake which seals the cracks and densifies the coating. The process decelerates when the cracks are closed, as the gas route is blocked and further oxidation continues over solid state diffusion. The self-healing abilities of metastable APS coatings could be interesting for other applications. [ABSTRACT FROM AUTHOR]