Search

The acceleration of electron beams with multiple transverse structures in wakefields driven by Laguerre-Gaussian pulses has been studied through three-dimensional (3D) particle-in-cell simulations. Under different laser-plasma conditions, the wakefield shows different transverse structures. In general cases, the wakefield shows a donut-like structure and it accelerates the ring-shaped hollow electron beam. When a lower plasma density or a smaller laser spot size is used, besides the donut-like wakefield, a central bell-like wakefield can also be excited. The wake sets in the center of the donut-like wake. In this case, both a central on-axis electron beam and a ring-shaped electron beam are simultaneously accelerated. Further, reducing the plasma density or laser spot size leads to an on-axis electron beam acceleration only. The research is beneficial for some potential applications requiring special pulse beam structures, such as positron acceleration and collimation. [ABSTRACT FROM AUTHOR]

We show that a ring-shaped hollow electron beam can be injected and accelerated by using a Laguerre-Gaussian laser pulse and ionization-induced injection in a laser wakefield accelerator. The acceleration and evolution of such a hollow, relativistic electron beam are investigated through three-dimensional particle-in-cell simulations. We find that both the ring size and the beam thickness oscillate during the acceleration. The beam azimuthal shape is angularly dependent and evolves during the acceleration. The beam ellipticity changes resulting from the electron angular momenta obtained from the drive laser pulse and the focusing forces from the wakefield. The dependence of beam ring radius on the laser-plasma parameters (e.g., laser intensity, focal size, and plasma density) is studied. Such a hollow electron beam may have potential applications for accelerating and collimating positively charged particles. [ABSTRACT FROM AUTHOR]

A scheme for enhancing the electron injection charge in a laser-driven bubble acceleration is proposed. In this scheme, a thin foil target is placed in front of a gas target. Upon interaction with an ultra-intense laser pulse, the foil emits electrons with large longitudinal momenta, allowing them to be trapped into the transmitted shaped laser-excited bubble in the gaseous plasma target. Twodimensional particle-in-cell simulation is used to demonstrate this scheme, and an electron beam with a total electron number of 4.21 × 108 μm-1 can be produced, which is twice the number of electrons produced without the foil. Such scheme may be widely used for applications that require high electron yields such as positron and gamma ray generation from relativistic electron beams interacting with solid targets. [ABSTRACT FROM AUTHOR]

Ionization-induced electron injection in a chirped laser pulse driven wakefield acceleration is investigated through particle-in-cell simulations. We find that negative (positive) chirp can longitudinally stretch (compress) laser pulse, and the wakefield amplitude can be enhanced regardless of the chirp sign. On the other hand, the rapid compression of a positively chirped pulse leads to the decrease of the wakefield potential difference, which breaks the ionization injection condition and consequent injection truncation occurs. The effective injection only lasts for a few hundred micrometers and the detailed injection length is determined by the chirp parameter. As a result, a highly tunable quasi-monoenergetic electron beam with narrow energy spread, hundreds of MeV central energy and tens of pC charge can be stably produced by this scheme. [ABSTRACT FROM AUTHOR]

We study a laser wakefield acceleration driven by mid-infrared (mid-IR) laser pulses through two-dimensional particle-in-cell simulations. Since a mid-IR laser pulse can deliver a larger ponderomotive force as compared with the usual 0.8 μm wavelength laser pulse, it is found that electron self-injection into the wake wave occurs at an earlier time, the plasma density threshold for injection becomes lower, and the electron beam charge is substantially enhanced. Meanwhile, our study also shows that quasimonoenergetic electron beams with a narrow energy-spread can be generated by using mid-IR laser pulses. Such a mid-IR laser pulse can provide a feasible method for obtaining a high quality and high charge electron beam. Therefore, the current efforts on constructing mid-IR terawatt laser systems can greatly benefit the laser wakefield acceleration research. [ABSTRACT FROM AUTHOR]

By using three-dimensional particle-in-cell simulations, externally injected electron beam acceleration and radiation in donut-like wake fields driven by a Laguerre–Gaussian pulse are investigated. Studies show that in the acceleration process the total charge and azimuthal momenta of electrons can be stably maintained at a distance of a few hundreds of micrometers. Electrons experience low-frequency spiral rotation and high-frequency betatron oscillation, which leads to a synchrotron-like radiation. The radiation spectrum is mainly determined by the betatron motion of electrons. The far field distribution of radiation intensity shows axial symmetry due to the uniform transverse injection and spiral rotation of electrons. Our studies suggest a new way to simultaneously generate hollow electron beam and radiation source from a compact laser plasma accelerator. [ABSTRACT FROM AUTHOR]

By using two-dimensional particle-in-cell simulations, we demonstrate high-flux dense positrons generation by irradiating an ultra-intense laser pulse onto a tapered hollow target. By using a laser with an intensity of 4 ×1023W/cm², it is shown that the Breit-Wheeler process dominates the positron production during the laser-target interaction and a positron beam with a total number >1015 is obtained, which is increased by five orders of magnitude than in the previous work at the same laser intensity. Due to the focusing effect of the transverse electric fields formed in the hollow cone wall, the divergence angle of the positron beam effectively decreases to ~15° with an effective temperature of ~674 MeV. When the laser intensity is doubled, both the positron flux (>1016) and temperature (963 MeV) increase, while the divergence angle gets smaller (~13°). The obtained high-flux low-divergence positron beam may have diverse applications in science, medicine, and engineering. [ABSTRACT FROM AUTHOR]

We propose a compact scheme for high-density and high-energy positron generation. In the scheme, the generation, compression and acceleration of positrons are encompassed in a plasma channel irradiated by an ultra intense laser. In about 20 μm, positrons are accelerated with their energy beyond 20 GeV, and are compressed with a maximal density of 4.1nc. The obtained positron beam with a wave-like density profile is accelerated via the direct laser acceleration. [ABSTRACT FROM AUTHOR]

By using three-dimensional particle-in-cell simulations, we investigate the dynamics of ultraintense Laguerre–Gaussian (LG) laser pulses interacting with a wire target. When a relativistic LG-mode laser pulse sweeps a wire target, annular electron bunches with attosecond duration are periodically dragged out of the left tip of the wire. Due to the radial laser electric field force exerted on the electrons, the annular bunches are tightly constrained near the target surface and steadily propagate along the wire. A strong return current is thus induced to satisfy the plasma neutralization condition. Once leaving from the right tip of the target, the electron emission angle gradually decreases and each hollow electron bunch is converged into an electron disc. Under the action of the longitudinal electric field, electrons are continuously accelerated to 100s MeV. At the same time, the laser angular momentum is transferred efficiently to the beam angular momentum (BAM) of the bunches. The structure of the dense short electron bunches is stable and keeps intact for more than 300 fs. We can manipulate the quality of the bunches by changing the laser and target parameters, such as the laser handedness and intensity, beam waist radius, wire length and radius. The scheme paves the way for the generation of high-quality attosecond electron bunches with low divergence, high beam charge and large BAM, which will have wide-range applications in various domains. [ABSTRACT FROM AUTHOR]

An all-optical scheme for high-density pair plasmas generation is proposed by two laser pulses colliding in a cylinder channel. Two dimensional particle-in-cell simulations show that, when the first laser pulse propagates in the cylinder, electrons are extracted out of the cylinder inner wall and accelerated to high energies. These energetic electrons later run into the second counter-propagating laser pulse, radiating a large amount of high-energy gamma photons via the Compton back-scattering process. The emitted gamma photons then collide with the second laser pulse to initiate the Breit–Wheeler process for pairs production. Due to the strong self-generated fields in the cylinder, positrons are confined in the channel to form dense pair plasmas. Totally, the maximum density of pair plasmas can be , for lasers with an intensity of . Both the positron yield and density are tunable by changing the cylinder radius and the laser parameters. The generated dense pair plasmas can further facilitate investigations related to astrophysics and particle physics. [ABSTRACT FROM AUTHOR]

High-energy-density electron–positron pairs play an increasingly important role in many potential applications. Here, we propose a scheme for enhanced positron production by an ultra intense laser irradiating a gas-Al compound target via the multi-photon Breit–Wheeler (BW) process. The laser pulse first ionizes the gas and interacts with a near-critical-density plasma, forming an electron bubble behind the laser pulse. A great deal of electrons are trapped and accelerated in the bubble, while the laser front hole-bores the Al target and deforms its front surface. A part of the laser wave is thus reflected by the inner curved target surface and collides with the accelerated electron bunch. Finally, a large number of γ photons are emitted in the forward direction via the Compton back-scattering process and the BW process is initiated. Dense electron–positron pairs are produced with a maximum density of m−3. Simulation results show that the positron generation is greatly enhanced in the compound target, where the positron yield is two orders of magnitude greater than that in only the solid slab case. The influences of the laser intensity, gas density and length on the positron beam quality are also discussed, which demonstrates the feasibility of the scheme in practice. [ABSTRACT FROM AUTHOR]