Search

Objective: Lipotoxicity and ectopic fat deposition reduce insulin signaling. It is not clear whether excess fat deposition in nonadipose tissue arises from excessive fatty acid delivery from adipose tissue or from impaired adipose tissue storage of ingested fat.Research Design and Methods: To investigate this we used a whole-body integrative physiological approach with multiple and simultaneous stable-isotope fatty acid tracers to assess delivery and transport of endogenous and exogenous fatty acid in adipose tissue over a diurnal cycle in lean (n = 9) and abdominally obese men (n = 10).Results: Abdominally obese men had substantially (2.5-fold) greater adipose tissue mass than lean control subjects, but the rates of delivery of nonesterified fatty acids (NEFA) were downregulated, resulting in normal systemic NEFA concentrations over a 24-h period. However, adipose tissue fat storage after meals was substantially depressed in the obese men. This was especially so for chylomicron-derived fatty acids, representing the direct storage pathway for dietary fat. Adipose tissue from the obese men showed a transcriptional signature consistent with this impaired fat storage function.Conclusions: Enlargement of adipose tissue mass leads to an appropriate downregulation of systemic NEFA delivery with maintained plasma NEFA concentrations. However the implicit reduction in adipose tissue fatty acid uptake goes beyond this and shows a maladaptive response with a severely impaired pathway for direct dietary fat storage. This adipose tissue response to obesity may provide the pathophysiological basis for ectopic fat deposition and lipotoxicity. [ABSTRACT FROM AUTHOR]

We tested whether lowering of blood pressure (BP) on the dietary approaches to stop hypertension (DASH) diet was associated with changes in peripheral vascular function: endothelial function, assessed by flow-mediated vasodilatation (FMD) of the brachial artery, and subcutaneous adipose tissue blood flow (ATBF). We also assessed effects on heart rate variability (HRV) as a measure of autonomic control of the heart. We allocated 27 men and women to DASH diet and control groups. We measured FMD, ATBF and HRV on fasting and after ingestion of 75 g glucose, before and after 30 days on dietary intervention, aiming for weight maintenance. The control group did not change their diet. The DASH-diet group complied with the diet as shown by significant reductions in systolic (P<0.001) and diastolic (P=0.005) BP, and in plasma C-reactive protein (P<0.01), LDL-cholesterol (P<0.01) and apolipoprotein B (P=0.001), a novel finding. Body weight changed by <1 kg. There were no changes in the control group. We found no changes in FMD, or in ATBF, in the DASH-diet group, although heart rate fell (P<0.05). Glucose and insulin concentrations did not change. In this small-scale study, the DASH diet lowered BP independently of peripheral mechanisms. [ABSTRACT FROM AUTHOR]

The National Institute for Occupational Safety and Health (NIOSH) conducted field studies at 12 sites using the Nanoparticle Emission Assessment Technique (NEAT) to characterize emissions during processes where engineered nanomaterials were produced or used. A description of the NEAT appears in Part A of this issue. Field studies were conducted in research and development laboratories, pilot plants, and manufacturing facilities handling carbon nanotubes (single-walled and multiwalled), carbon nanofibers, fullerenes, carbon nanopearls, metal oxides, electrospun nylon, and quantum dots. The results demonstrated that theNEATwas useful in evaluating emissions and that readily available engineering controls can be applied to minimize nanomaterial emissions. [ABSTRACT FROM AUTHOR]

The National Institute for Occupational Safety and Health (NIOSH) conducted field studies at 12 sites using the Nanoparticle Emission Assessment Technique (NEAT) to characterize emissions during processes where engineered nanomaterials were produced or used. A description of the NEAT appears in Part A of this issue. Field studies were conducted in research and development laboratories, pilot plants, and manufacturing facilities handling carbon nanotubes (single-walled and multiwalled), carbon nanofibers, fullerenes, carbon nanopearls, metal oxides, electrospun nylon, and quantum dots. The results demonstrated that the NEAT was useful in evaluating emissions and that readily available engineering controls can be applied to minimize nanomaterial emissions. [ABSTRACT FROM AUTHOR]

There are currently no exposure limits specific to engineered nanomaterial nor any national or international consensus standards on measurement techniques for nanomaterials in the workplace. However, facilities engaged in the production and use of engineered nanomaterials have expressed an interest in learning whether the potential for worker exposure exists. To assist with answering this question, the National Institute for Occupational Safety and Health established a nanotechnology field research team whose primary goal was to visit facilities and evaluate the potential for release of nanomaterials and worker exposure. The team identified numerous techniques to measure airborne nanomaterials with respect to particle size, mass, surface area, number concentration, and composition. However, some of these techniques lack specificity and field portability and are difficult to use and expensive when applied to routine exposure assessment. This article describes the nanoparticle emission assessment technique (NEAT) that uses a combination of measurement techniques and instruments to assess potential inhalation exposures in facilities that handle or produce engineered nanomaterials. The NEAT utilizes portable direct-reading instrumentation supplemented by a pair of filter-based air samples (source-specific and personal breathing zone). The use of the filter-based samples are crucial for identification purposes because particle counters are generally insensitive to particle source or composition and make it difficult to differentiate between incidental and process-related nanomaterials using number concentration alone. Results from using the NEAT at 12 facilities are presented in the companion article (Part B) in this issue. [ABSTRACT FROM AUTHOR]

There are currently no exposure limits specific to engineered nanomaterial nor any national or international consensus standards on measurement techniques for nanomaterials in the workplace. However, facilities engaged in the production and use of engineered nanomaterials have expressed an interest in learning whether the potential for worker exposure exists. To assist with answering this question, the National Institute for Occupational Safety and Health established a nanotechnology field research team whose primary goal was to visit facilities and evaluate the potential for release of nanomaterials and worker exposure. The team identified numerous techniques to measure airborne nanomaterials with respect to particle size, mass, surface area, number concentration, and composition. However, some of these techniques lack specificity and field portability and are difficult to use and expensive when applied to routine exposure assessment. This article describes the nanoparticle emission assessment technique (NEAT) that uses a combination of measurement techniques and instruments to assess potential inhalation exposures in facilities that handle or produce engineered nanomaterials. The NEAT utilizes portable direct-reading instrumentation supplemented by a pair of filter-based air samples (source-specific and personal breathing zone). The use of the filter-based samples are crucial for identification purposes because particle counters are generally insensitive to particle source or composition and make it difficult to differentiate between incidental and process-related nanomaterials using number concentration alone. Results from using the NEAT at 12 facilities are presented in the companion article (Part B) in this issue. [ABSTRACT FROM AUTHOR]

OBJECTIVE: We aimed to determine differences in the postprandial contributions of different fatty acid sources to VLDL triglycerides (TGs) in healthy men and women with varying degrees of insulin resistance. RESEARCH DESIGN AND METHODS: Insulin-resistant (n = 11) and insulin-sensitive (n = 11) men and women (n = 6) were given an intravenous infusion of [(2)H(2)]palmitic acid to investigate systemic nonesterified fatty acid (NEFA) incorporation into VLDL TGs. Participants were also fed a mixed meal containing [U-(13)C]palmitic acid to investigate the contribution of dietary fatty acids to VLDL TG production. Blood samples were taken over the following 6 h. Separation of VLDL was performed by density gradient ultracentrifugation and immunoaffinity techniques specific to apolipoprotein B-100. RESULTS: Insulin-resistant and insulin-sensitive men had similar postprandial chylomicron and chylomicron remnant TG concentrations, but insulin-resistant men had higher postprandial VLDL TG concentrations (median [range]; area under the curve 485 micromol/l [123-992] vs. 287 micromol/l [162-510]; P < 0.05). At 360 min, most of the difference in VLDL TGs was accounted for by an additional contribution from splanchnic fat (means +/- SE; 331 +/- 76 micromol/l vs. 89 +/- 25 micromol/l; P < 0.01). The contribution of fatty acids from endogenous systemic NEFAs was similar across the groups, as were dietary fatty acids. There was no difference in the VLDL TG concentration or the contribution of different fatty acid sources between insulin-sensitive men and women. CONCLUSIONS: In the postprandial period, the only sources of fatty acids for VLDL TG production to differ in the insulin-resistant compared with the insulin-sensitive men are those derived from splanchnic sources. [ABSTRACT FROM AUTHOR]

Examines the effects of substituting saturated fat rich foods with either n-6 polyunsaturated or monounsaturated fat rich foods in free-living adults with self-selected diets on plasma cholesterol. Characteristics of participants; Fatty acid composition of spreads and oils; Energy and nutrient composition of diets; Fatty acid composition of plasma triglyceride.

Workers, particularly outdoor workers, are among the populations most disproportionately affected by climate-related hazards. However, scientific research and control actions to comprehensively address these hazards are notably absent. To assess this absence, a seven-category framework was developed in 2009 to characterize the scientific literature published from 1988–2008. Using this framework, a second assessment examined the literature published through 2014, and the current one examines literature from 2014–2021. The objectives were to present literature that updates the framework and related topics and increases awareness of the role of climate change in occupational safety and health. In general, there is substantial literature on worker hazards related to ambient temperatures, biological hazards, and extreme weather but less on air pollution, ultraviolet radiation, industrial transitions, and the built environment. There is growing literature on mental health and health equity issues related to climate change, but much more research is needed. The socioeconomic impacts of climate change also require more research. This study illustrates that workers are experiencing increased morbidity and mortality related to climate change. In all areas of climate-related worker risk, including geoengineering, research is needed on the causality and prevalence of hazards, along with surveillance to identify, and interventions for hazard prevention and control. [ABSTRACT FROM AUTHOR]

Background: The Dietary Approaches to Stop Hypertension (DASH) diet is widely promoted in the USA for the prevention and treatment of high blood pressure. It is high in fruit and vegetables, low-fat dairy and wholegrain foods and low in saturated fat and refined sugar. To our knowledge, the use of this dietary pattern has not been assessed in a free-living UK population. Methods: The DASH diet was adapted to fit UK food preferences and portion sizes. Fourteen healthy subjects followed the adapted DASH diet for 30 days in which they self-selected all food and beverages. Dietary intake was assessed by 5-day food diaries completed before and towards the end of the study. Blood pressure was measured at the beginning and end of the study to assess compliance to the DASH style diet. Results: The DASH diet was easily adapted to fit with UK food preferences. Furthermore, it was well tolerated and accepted by subjects. When on the DASH style diet, subjects reported consuming significantly ( P < 0.01) more carbohydrate and protein and less total fat (5%, 6% and 9% total energy, respectively). Sodium intakes decreased by 860 mg day−1 ( P < 0.001). Systolic and diastolic blood pressure decreased significantly ( P < 0.05) by 4.6 and 3.9 mmHg, respectively when on the DASH style diet. Conclusions: The DASH style diet was well accepted and was associated with a decrease in blood pressure in normotensive individuals and should be considered when giving dietary advice to people with elevated blood pressure in the UK. [ABSTRACT FROM AUTHOR]

Emerging and novel technologies, materials, and information integrated into increasingly automated and networked manufacturing processes or into traditional manufacturing settings are enhancing the efficiency and productivity of manufacturing. Globally, there is a move toward a new era in manufacturing that is characterized by: (1) the ability to create and deliver more complex designs of products; (2) the creation and use of materials with new properties that meet a design need; (3) the employment of new technologies, such as additive and digital techniques that improve on conventional manufacturing processes; and (4) a compression of the time from initial design concept to the creation of a final product. Globally, this movement has many names, but “advanced manufacturing” has become the shorthand for this complex integration of material and technology elements that enable new ways to manufacture existing products, as well as new products emerging from new technologies and new design methods. As the breadth of activities associated with advanced manufacturing suggests, there is no single advanced manufacturing industry. Instead, aspects of advanced manufacturing can be identified across a diverse set of business sectors that use manufacturing technologies, ranging from the semiconductors and electronics to the automotive and pharmaceutical industries. The breadth and diversity of advanced manufacturing may change the occupational and environmental risk profile, challenge the basic elements of comprehensive health and safety (material, process, worker, environment, product, and general public health and safety), and provide an opportunity for development and dissemination of occupational and environmental health and safety (OEHS) guidance and best practices. It is unknown how much the risk profile of different elements of OEHS will change, thus requiring an evolution of health and safety practices. These changes may be accomplished most effectively through multi-disciplinary, multi-sector, public-private dialogue that identifies issues and offers solutions. [ABSTRACT FROM AUTHOR]

Organizations around the world have called for the responsible development of nanotechnology. The goals of this approach are to emphasize the importance of considering and controlling the potential adverse impacts of nanotechnology in order to develop its capabilities and benefits. A primary area of concern is the potential adverse impact on workers, since they are the first people in society who are exposed to the potential hazards of nanotechnology. Occupational safety and health criteria for defining what constitutes responsible development of nanotechnology are needed. This article presents five criterion actions that should be practiced by decision-makers at the business and societal levels-if nanotechnology is to be developed responsibly. These include (1) anticipate, identify, and track potentially hazardous nanomaterials in the workplace; (2) assess workers' exposures to nanomaterials; (3) assess and communicate hazards and risks to workers; (4) manage occupational safety and health risks; and (5) foster the safe development of nanotechnology and realization of its societal and commercial benefits. All these criteria are necessary for responsible development to occur. Since it is early in the commercialization of nanotechnology, there are still many unknowns and concerns about nanomaterials. Therefore, it is prudent to treat them as potentially hazardous until sufficient toxicology, and exposure data are gathered for nanomaterial-specific hazard and risk assessments. In this emergent period, it is necessary to be clear about the extent of uncertainty and the need for prudent actions. [ABSTRACT FROM AUTHOR]

In early 2006, the National Institute for Occupational Safety and Health created a field research team whose mission is to visit a variety of facilities engaged in the production, handling, or use of engineered nanomaterials (ENMs) and to conduct initial emission and exposure assessments to identify candidate sites for further study. To conduct the assessments, the team developed the Nanoparticle Emission Assessment Technique (NEAT), which has been used at numerous facilities to sample multiple engineered nanomaterials. Data collected at four facilities, which volunteered to serve as test sites, indicate that specific tasks can release ENMs to the workplace atmosphere and that traditional controls such as ventilation can be used to limit exposure. Metrics such as particle number concentration (adjusted for background), airborne mass concentration, and qualitative transmission electron microscopy were used to determine the presence, nature, and magnitude of emissions and whether engineered nanomaterials migrated to the workers' breathing zone. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of Occupational and Environmental Hygiene for the following free supplemental resource: a PDF file containing information on facilities, a description of processes/tasks, existing controls, and sampling strategy, and a PDF file containing TEM images according to facility and task.] [ABSTRACT FROM AUTHOR]