Search

Fault Management System (FMS) is one of the main functions in Distribution Automation System (DAS); however, the conventional FMS cannot be used in distribution systems with Distributed Generators (DGs) due to the lack of directional function. The directional fault detection device is expensive due to the expensive directional module used. In a wide-ranging distribution system, the investment cost will be very high if the fault detecting devices are expensive. Therefore, the design and implementation of a cost-effective FMS for distribution system with DGs is necessary. A Multi-Level Fault-Current Indicator (MLFCI) having a plurality of reed switches used to detect different current levels is proposed in this paper. The hardware prototype is designed and implemented. An algorithm used to locate fault based on the different fault current levels is derived. A MLFCI-based FMS for distribution systems with DGs is then realized. Experimental results demonstrate the feasibility of the proposed MLFCI. Simulation results are then used to demonstrate the validity of the proposed MLFCI-based FMS for distribution systems with DGs. [ABSTRACT FROM AUTHOR]

Utilizing battery storage systems (BSSs) can reduce the intermittent output of PV generation systems (PVGSs) and make them dispatchable. The aim of this paper is to design an optimal charging/discharging scheduling for BSSs such that the line loss of distribution systems interconnected with sizeable PVGSs can be minimized. A mathematical model for BSSs which can be used to simulate the charging procedures such as the commonly-used constant current to constant voltage (CC-CV) charging method, the discharging procedures and the state of charge (SOC) is proposed first. The minimum line loss problem considering the intermittent output of PVGSs and the scheduling of BSSs is then formulated based on the BSS mathematical model. The optimal charging/discharging scheduling of BSSs can then be obtained by a genetic algorithm (GA) based method. Test results demonstrate the validity of the proposed mathematical model and optimal charging/discharging scheduling for BSSs. [ABSTRACT FROM PUBLISHER]

Fault indicating devices such as fault indicators (FIs) have been widely used in distribution systems to improve reliability and reduce outage duration. Recently, FIs with communication interfaces are integrated into distribution automation (DA) to further reduce fault-finding time by reporting FIs' statuses back to control center. When faults occur, a lot of alarms and fault information are received from Outage Management System (OMS), Trouble Call System (TCS) and Customer Information System (CIS) and are shown to system operators. As a result, the identification of faulted line sections in a wide-ranging distribution system from FIs' statuses is not an easy task, especially when multiple faults occur simultaneously and/or distributed generators (DGs) are connected. An automatic and fast faulted line-section location method for distribution systems based on FIs is proposed in this paper. The line sections between adjacent FIs can be treated as a possible fault location (PFL) and the fault current detected by the FI can be considered as line current (LC) flowing between the adjacent PFLs. A relationship matrix between PFLs and LCs is then derived and used to design the proposed automatic and fast faulted line-section location method. The faulted line sections can then be located effectively and efficiently by the proposed method. Test results for an actual distribution system demonstrate the validity of the proposed faulted line-section location method. [ABSTRACT FROM PUBLISHER]

Fault Current Indicators (FCIs) with communication interfaces have been widely used in distribution systems to reduce fault-finding time. The effectiveness of a Fault Management System (FMS) composed of FCIs greatly depends on the performance of the communication network deployed by the FCIs and the failure rates of distribution systems. The conventional techniques only focus on the issues of optimal number and location of FCIs or communication network deployment individually; therefore, the effectiveness of an FMS cannot be assessed realistically. A systematic effectiveness assessment methodology for FMS considering the performance of the communication network deployed by the FCIs and the failure rates of distribution systems is vital and is investigated in this paper. A communication evaluation platform is designed in this paper and used to acquire the field measurements of communication parameters. The communication parameters, especially the Packet Success Rate (PSR), between two adjacent FCIs are measured, and the Probability Density Function (PDF) of the PSR can be built accordingly. The effectiveness of the FMS is then assessed by stochastic analysis considering the failure rates of the distribution system and PSR PDFs between two adjacent FCIs. Due to the characteristics of easy installation, maintenance, longer battery life, lower cost, and so on of ZigBee, the ZigBee-based FCI is mainly discussed in this paper. In order to efficiently find the communication route when a fault occurs, a fast communication route tracking method is also proposed in this paper and its feasibility is demonstrated in an actual distribution system. Experimental and simulation results demonstrate the validity of the proposed systematic effectiveness assessment methodology for an FMS composed of FCIs. The proposed assessment methodology can more realistically react to the actual conditions of the FMS and therefore save on installation time and costs. [ABSTRACT FROM AUTHOR]

In order to solve the problems caused by the pulsating current ripple of switching-mode power converters, a passive pulsating ripple canceling circuit (PPRCC) is proposed in this paper. The features of the proposed PPRCC include simple, modular structure, and high degree of design flexibility. By integrating the proposed PPRCC, an input current ripple-free flyback-type converter is adopted and analyzed as an example because of its comprehensive utilization in small power rating commercial products. In addition, the switch voltage spike of flyback converter can be suppressed by integrating the proposed PPRCC without using snubbers, it turns out that the efficiency can be further improved. The corresponding operating principle, steady-state analysis, and zero ripple design criteria of the proposed PPRCC are provided. Finally, a 100 W laboratory prototype is constructed to verify the effectiveness of the proposed principle. Experimental results show that the resulting peak-to-peak input current ripple is reduced by 96% and nearly 0.5% and 1.7% improvement in efficiency can be achieved by the proposed PPRCC, at 80 W and 100 W load conditions, respectively. [ABSTRACT FROM PUBLISHER]