Search

We investigated the impact of calcium and magnesium ions on the deposition kinetics of flagellated and nonflagellated Pseudomonas aeruginosaonto an alginate conditioning film in a radial stagnation point flow system. The bacterial deposition/adhesion behavior was related to structural changes of the alginate film in the presence of the divalent cations. Our results showed that adhesion of nonmotile bacteria was governed by cation bridging interactions between high-affinity sites at the bacterial surface and either clean or alginate-conditioned substrate surfaces. For motile bacteria, the adhesion onto clean quartz was governed by electrostatic interactions while adhesion onto alginate-conditioned quartz was dependent on the structure and viscoelastic properties of the alginate film in the presence of calcium or magnesium. We demonstrate that bacterial adhesion behavior is governed both by the effects of divalent cations on the surface properties of the bacteria and the substrate and by the type of specific interactions occurring between these two surfaces. [ABSTRACT FROM AUTHOR]

A quartz crystal microbalance with dissipation (QCM-D) has been used to determine the adsorption rate of ampicillin-resistant linear and supercoiled plasmid DNA onto a silica surface coated with natural organic matter (NOM). The structure of the resulting adsorbed DNA layer was determined by analyzing the viscoelastic properties of the adsorbed DNA layers as they formed and were then exposed to solutions of different ionic composition. The QCM-D data were complemented by dynamic light scattering measurements of diffusion coefficients of the DNA molecules as a function of solution ionic composition. The obtained results suggest that electrostatic interactions control the adsorption and structural changes of the adsorbed plasmid DNA on the NOM-coated silica surface. The adsorption of DNA molecules to the NOM layer took place at moderately high monovalent (sodium) electrolyte concentrations. A sharp decrease in solution ionic strength did not result in the release of the adsorbed DNA, indicating that DNA adsorption on the NOM-coated silica surface is irreversible under the studied solution conditions. However, the decrease in electrolyte concentration influenced the structure of the adsorbed layer, causing the adsorbed DNA to adopt a less compact conformation. The linear and supercoiled DNA had similar adsorption rates, but the linear DNA formed a thicker and less compact adsorbed layer than the supercoiled DNA. [ABSTRACT FROM AUTHOR]

A quartz crystal microbalance with dissipation (QCM-D) is used to determine the adsorption rate of a supercoiled plasmid DNA onto a quartz surface and the structure of the resulting adsorbed DNA layer. To better understand the DNA adsorption mechanisms and the adsorbed layer physicochemical properties, the QCM-D data are complemented by dynamic light scattering measurements of diffusion coefficients of the DNA molecules as a function of solution ionic composition. The data from simultaneous monitoring of variations in frequency and dissipation energy with the QCM-D suggest that the adsorbed DNA layer is more rigid in the presence of divalent (calcium) cations compared to monovalent (sodium) cations. Adsorption rates are significantly higher in the presence of calcium, attaining a transport-limited rate at about 1 mM Ca2. Results further suggest that in low ionic strength solutions containing 1 mM Ca2and in moderately high ionic strength solutions containing 300 mM NaCl, plasmid DNA adsorption to negatively charged mineral surfaces is irreversible. [ABSTRACT FROM AUTHOR]

Understanding the adsorption properties of polysaccharides in terms of substrate affinity, kinetics, and layer structure is of paramount importance in numerous industrial and natural systems. The structural growth of the layers of two model polysaccharidessodium alginate and polygalacturonic acid (PGA)was characterized by quartz crystal microbalance with dissipation and atomic force microscopy. Monitoring the variations in frequency and dissipation energy provides insights into both the average adsorbed mass and the viscoelastic properties of the adsorbed layer of polyelectrolytes along with the associated ions and water molecules. Both polysaccharides had similar adsorption patterns with increasing ionic strengths and showed significant complexation of calcium ions. In the presence of calcium, the alginate gel layer exhibited significant swelling with an increasing concentration of monovalent salt that the PGA gel layer did not manifest. Basing our discussion on the “egg-box model”, we interpreted these different swelling behaviors as resulting from differences in the complexation modes of the two polysaccharides. The dimerization of the polymers by cross-linking and the weaker dimer−dimer associations play major roles in the sensitivity of the polysaccharide gel matrix to high salt concentration environments. [ABSTRACT FROM AUTHOR]

A quartz crystal microbalance with dissipation monitoring is used to study the adsorption of linear plasmid DNA on silica surfaces and silica surfaces coated with poly-l-lysine (PLL) in solutions containing either alkaline earth (calcium and magnesium) or transition (cobalt, copper, and zinc) metals. Our results show that electrostatic attraction alone does not fully explain the significantly higher adsorption rate of DNA on the positively charged PLL layer in Cu2늉溶⨧ compared to solutions containing Ca2, Mg2, Co2, or Zn2. Diffusion coefficients measured by dynamic light scattering reveal that the compactness of plasmid DNA molecules is greater in solutions containing Cu2犉ꥪ랝 to that of DNA in other divalent electrolyte solutions. When the adsorption rate of plasmid DNA on silica is normalized to the corresponding adsorption rate on PLL-coated surfaces at the same solution condition, the attachment (adsorption) efficiencies are about 0.01 for Ca2 Mg2, but close to unity for Co2, Cu2, or Zn2. Results from viscoelastic modeling of adsorbed DNA layers suggest that the DNA layer formed in Cu2늉溶⨧ is thicker and more viscous compared to that formed in Co2늉溶⨧. This study demonstrates that plasmid DNA has a strong affinity to Cu2, which results in a more compact conformation of DNA molecules compared to the case with the other divalent cations investigated. [ABSTRACT FROM AUTHOR]

Prediction of bacterial deposition rates onto substrates in natural aquatic systems is quite challenging because of the inherent complexity of such systems. In this study, we compare experimental deposition kinetics of nonmotile bacteria (Pseudomonas aeruginosa) on an alginate-coated substrate in a radial stagnation point flow (RSPF) system to predictions based on DLVO theory. The “softness” of the surface layer of the bacteria and alginate-coated substrate was considered in the calculations of their electrokinetic surface properties, and the relevance of both the classical zeta potential and the outer surface potential as surrogates for surface potential was investigated. Independent of the used electrical potentials, we showed that significant discrepancies exist between theory and experiments. Analysis of microscopic images in the RSPF system has demonstrated, for the first time, that irreversible deposition of particles or cells entrapped in the secondary energy minimum can occur on the alginate layer, despite the hydrodynamic forces resulting from the radial flow in the RSPF system. It is suggested that polymeric structures associated with the surface of the particle/cell and the alginate-coated substrate are responsible for the transition between the secondary minimum and primary energy well. This mode of deposition is likely to be important in the deposition of microorganisms in complex aquatic systems. [ABSTRACT FROM AUTHOR]

Early-stage aggregation kinetics studies of alginate-coated hematite nanoparticles in solutions containing alkaline-earth metal cations revealed enhanced aggregation rates in the presence of Ca2, Sr2, and Ba2, but not with Mg2. Transmission electron microscopy (TEM) imaging of the aggregates provided evidence that alginate gel formation was essential for enhanced aggregation to occur. Dynamic light scattering (DLS) aggregation results clearly indicated that a much lower concentration of Ba2compared to Ca2and Sr2was required to achieve a similar degree of enhanced aggregation in each system. To elucidate the relationship between the alginate's affinities for divalent cations and the enhanced aggregation of the alginate-coated hematite nanoparticles, atomic force microscopy (AFM) was employed to probe the interaction forces between alginate-coated hematite surfaces under the solution chemistries used for the aggregation study. Maximum adhesion forces, maximum pull-off distances, and the work of adhesion were used as indicators to gauge the alginate's affinity for the divalent cations and the resulting attractive interactions between alginate-coated hematite nanoparticles. The results showed that alginate had higher affinity for Ba2than either Sr2or Ca2. This same trend was consistent with the cation concentrations required for comparable enhanced aggregation kinetics, suggesting that the rate of alginate gel formation controls the enhanced aggregation kinetics. An aggregation mechanism incorporating the gelation of alginate is proposed to explain the accelerated aggregate growth in the presence of Ca2, Sr2, and Ba2. [ABSTRACT FROM AUTHOR]

The incorporation of silver nanoparticles (AgNPs) into polymeric nanofibers has attracted a great deal of attention due to the strong antimicrobial activity that the resulting fibers exhibit. However, bactericidal efficacy of AgNP-coated electrospun fibrous mats has not yet been demonstrated. In this study, polysulfone (PSf) fibers were electrospun and surface-modified using an oxygen plasma treatment, which allowed for facile irreversible deposition of cationically charged polyethyleneimine (PEI)-AgNPs via electrostatic interactions. The PSf–AgNP mats were characterized for relative silver concentration as a function of plasma treatment time using ICP-MS and changes in contact angle. Plasma treatment of 60 s was the shortest time required for maximum loss of bacteria (Escherichia coli) viability. Time-dependent bacterial cytotoxicity studies indicate that the optimized PSf–AgNP mats exhibit a high level of inactivation against both Gram negative bacteria, Escherichia coli, and Gram positive bacteria, Bacillus anthracisand Staphylococcus aureus. [ABSTRACT FROM AUTHOR]

Despite considerable efforts toward fabricating ordered, water-permeable, mesoporous films from block copolymers, fine control over pore dimensions, structural characteristics, and mechanical behavior of graded structures remains a major challenge. To this end, we describe the fabrication and performance characteristics of graded mesoporous and hybrid films derived from the newly synthesized triblock terpolymer, poly(isoprene-b-styrene-b-4-vinylpyridine). A unique morphology, unachievable in diblock copolymer systems, with enhanced mechanical integrity is evidenced. The film structure comprises a thin selective layer containing vertically aligned and nearly monodisperse mesopores at a density of more than 1014per m2above a graded macroporous layer. Hybridization via homopolymer blending enables tuning of pore size within the range of 16 to 30 nm. Solvent flow and solute separation experiments demonstrate that the terpolymer films have permeabilities comparable to commercial membranes, are stimuli-responsive, and contain pores with a nearly monodisperse diameter. These results suggest that moving to multiblock polymers and their hybrids may open new paths to produce high-performance graded membranes for filtration, separations, nanofluidics, catalysis, and drug delivery. [ABSTRACT FROM AUTHOR]

We provide the first evidence that the size (diameter) of carbon nanotubes (CNTs) is a key factor governing their antibacterial effects and that the likely main CNT-cytotoxicity mechanism is cell membrane damage by direct contact with CNTs. Experiments with well-characterized single-walled carbon nanotubes (SWNTs) and multiwalled carbon nanotubes (MWNTs) demonstrate that SWNTs are much more toxic to bacteria than MWNTs. Gene expression data show that in the presence of both MWNTs and SWNTs, Escherichia coliexpresses high levels of stress-related gene products, with the quantity and magnitude of expression being much higher in the presence of SWNTs. [ABSTRACT FROM AUTHOR]

We provide the first direct evidence that highly purified single-walled carbon nanotubes (SWNTs) exhibit strong antimicrobial activity. By using a pristine SWNT with a narrow diameter distribution, we demonstrate that cell membrane damage resulting from direct contact with SWNT aggregates is the likely mechanism leading to bacterial cell death. This finding may be useful in the application of SWNTs as building blocks for antimicrobial materials. [ABSTRACT FROM AUTHOR]