Search

Framed within the Copernicus Climate Change Service (C3S) of the European Commission, the European Centre for Medium-Range Weather Forecasts (ECMWF) is producing an enhanced global dataset for the land component of the fifth generation of European ReAnalysis (ERA5), hereafter referred to as ERA5-Land. Once completed, the period covered will span from 1950 to the present, with continuous updates to support land monitoring applications. ERA5-Land describes the evolution of the water and energy cycles over land in a consistent manner over the production period, which, among others, could be used to analyse trends and anomalies. This is achieved through global high-resolution numerical integrations of the ECMWF land surface model driven by the downscaled meteorological forcing from the ERA5 climate reanalysis, including an elevation correction for the thermodynamic near-surface state. ERA5-Land shares with ERA5 most of the parameterizations that guarantees the use of the state-of-the-art land surface modelling applied to numerical weather prediction (NWP) models. A main advantage of ERA5-Land compared to ERA5 and the older ERA-Interim is the horizontal resolution, which is enhanced globally to 9 km compared to 31 km (ERA5) or 80 km (ERA-Interim), whereas the temporal resolution is hourly as in ERA5. Evaluation against independent in situ observations and global model or satellite-based reference datasets shows the added value of ERA5-Land in the description of the hydrological cycle, in particular with enhanced soil moisture and lake description, and an overall better agreement of river discharge estimations with available observations. However, ERA5-Land snow depth fields present a mixed performance when compared to those of ERA5, depending on geographical location and altitude. The description of the energy cycle shows comparable results with ERA5. Nevertheless, ERA5-Land reduces the global averaged root mean square error of the skin temperature, taking as reference MODIS data, mainly due to the contribution of coastal points where spatial resolution is important. Since January 2020, the ERA5-Land period available has extended from January 1981 to the near present, with a 2- to 3-month delay with respect to real time. The segment prior to 1981 is in production, aiming for a release of the whole dataset in summer/autumn 2021. The high spatial and temporal resolution of ERA5-Land, its extended period, and the consistency of the fields produced makes it a valuable dataset to support hydrological studies, to initialize NWP and climate models, and to support diverse applications dealing with water resource, land, and environmental management. The full ERA5-Land hourly and monthly averaged datasets presented in this paper are available through the C3S Climate Data Store at https://doi.org/10.24381/cds.e2161bac and https://doi.org/10.24381/cds.68d2bb30 , respectively. [ABSTRACT FROM AUTHOR]

Framed within the Copernicus Climate Change Service (C3S) of the European Commission, the European Centre for Medium-Range Weather Forecasts (ECMWF) is producing an enhanced global dataset for the land component of the 5 th generation of European ReAnalysis (ERA5), hereafter named as ERA5-Land. Once completed, the period covered will span from 1950 to present, with continuous updates to support land monitoring applications. ERA5-Land describes the evolution of the water and energy cycles over land in a consistent manner over the production period, enabling the characterisation of trends and anomalies. This is achieved through global high resolution numerical integrations of the ECMWF land surface model driven by the downscaled meteorological forcing from the ERA5 climate reanalysis, including an elevation correction for the thermodynamic near-surface state. ERA5-Land shares with ERA5 most of the parametrizations that guarantees the use of the state-of-the-art land surface modeling applied to Numerical Weather Prediction (NWP) models. A main advantage of ERA5-Land compared to ERA5 and the older ERA-Interim is the horizontal resolution, which is enhanced globally to 9 km compared to 31 km (ERA5) or 80 km (ERA-Interim), whereas the temporal resolution is hourly as in ERA5. Evaluation against independent in situ observations and global model or satellite-based reference datasets shows the added value of ERA5-Land in the description of the hydrological cycle, in particular with enhanced soil moisture and lake description, and an overall better agreement of river discharge estimations with available observations. However, ERA5-Land snow depth fields present a mixed performance when compared to those of ERA5, depending on geographical location and altitude. The description of the energy cycle shows comparable results with ERA5. Nevertheless, ERA5-Land reduces the global averaged root mean square error of the skin temperature, taking as reference MODIS data, mainly due to the contribution of coastal points where spatial resolution is important. Since January 2020, the ERA5-Land period available extends from January 1981 to near present, with 2 to 3 months delay with respect to real-time. The segment prior to 1981 is in production, aiming to a release of the whole dataset in summer 2021. The high spatial and temporal resolution of ERA5-Land, its extended period, and the consistency of the fields produced makes it a valuable dataset to support hydrological studies, to initialise NWP and climate models, and to support diverse applications dealing with water resource, land and environmental management. The full ERA5-Land hourly (Muñoz-Sabater, J., 2019a) and monthly (Muñoz-Sabater, J., 2019b) averaged datasets presented in this paper are available through the C3S Climate Data Store at https://doi.org/10.24381/cds.e2161bac and https://doi.org/10.24381/cds.68d2bb30, respectively. [ABSTRACT FROM AUTHOR]

In this study we derive the environmental lapse rate (ELR) from vertical profiles of temperature in the lower troposphere, applying it to downscale air temperature of the new European Centre For Medium‐Range Weather Forecasts (ECMWF) reanalysis ERA5, which replaces ERA‐Interim (ERAI). We focus over the western U.S. region, a data‐rich area with observations of daily maximum and minimum temperature (Global Historical Climatology Network) and snow depth and soil temperature. Observations indicate an ELR of −4.5 K·km−1 in the region, lower than the commonly used −6.5 K·km−1. ERA5 ELR agrees with the observational estimates, with some overestimation in winter and limitations in the diurnal variability. The elevation correction of ERA5 temperature using different ELR showed the benefits of deriving ELR fields from ERA5 vertical profiles, when compared with a constant ELR. Simulations with the ECMWF land surface model, at 9‐km resolution, driven by ERA5 using different ELR corrections showed the added value of the methodology, but the impact of different ELR corrections is limited. However, the validity of the downscaling method in reducing temperature to station altitude suggests that there is sufficient generality for application at kilometer and subkilometer resolutions. By comparing the estimated representativity errors of observations with reanalysis, the improvements from ERAI to ERA5 are mainly visible in the random component of the error. Large systematic biases remain, which require further attention from the modeling and data assimilation, and limit the potential benefits of ELR corrections. Key Points: Environmental lapse rate derived from atmospheric reanalysis vertical profiles agrees with observational estimatesSurface downscaling outperforms ERA5, but the impact of different ELR corrections to the driving data is reducedSystematic biases in ERA5 near‐surface temperature require further efforts from modeling and data assimilation [ABSTRACT FROM AUTHOR]

For more than a decade, the European Centre for Medium-Range Weather Forecasts (ECMWF) has used in-situ observations of 2 m temperature and 2 m relative humidity to operationally constrain the temporal evolution of model soil moisture. These observations are not available everywhere and they are indirectly linked to the state of the surface, so under various circumstances, such as weak radiative forcing or strong advection, they cannot be used as a proxy for soil moisture reinitialization in numerical weather prediction. Recently, the ECMWF soil moisture analysis has been updated to be able to account for the information provided by microwave brightness temperatures from the Soil Moisture and Ocean Salinity (SMOS) mission of the European Space Agency (ESA). This is the first time that ECMWF uses direct information of the soil emission from passive microwave data to globally adjust the estimation of soil moisture by a land-surface model. This paper presents a novel version of the ECMWF Extended Kalman Filter soil moisture analysis to account for remotely sensed passive microwave data. It also discusses the advantages of assimilating direct satellite radiances compared to current soil moisture products, with a view to an operational implementation. A simple assimilation case study at global scale highlights the potential benefits and obstacles of using this new type of information in a global coupled land-atmospheric model. [ABSTRACT FROM AUTHOR]

The 2-D interferometric radiometer on board the Soil Moisture and Ocean Salinity (SMOS) satellite has been providing a continuous data set of brightness temperatures, at different viewing geometries, containing information of the Earth's surface microwave emission. This data set is affected by several sources of noise, which are a combination of the noise associated with the radiometer itself and the different views under which a heterogeneous target, such as continental surfaces, is observed. As a result, the SMOS data set is affected by a significant amount of noise. For many applications, such as soil moisture retrieval, reducing noise from the observations while keeping the signal is necessary, and the accuracy of the retrievals depends on the quality of the observed data set. This paper investigates the averaging of SMOS brightness temperatures in angular bins of different sizes as a simple method to reduce noise. All the observations belonging to a single pixel and satellite overpass were fitted to a polynomial regression model, with the objective of characterizing and evaluating the associated noise. Then, the observations were averaged in angular bins of different sizes, and the potential benefit of this process to reduce noise from the data was quantified. It was found that, if a 2° angular bin is used to average the data, the noise is reduced by up to 3 K. Furthermore, this method complements necessary data thinning approaches when a large volume of data is used in data assimilation systems. [ABSTRACT FROM PUBLISHER]

This paper presents the forward modelling aspects of the SMOS (Soil Moisture and Ocean Salinity) activities at ECMWF (European Centre for Medium-Range Weather Forecasts). Several parameterizations of the Community Microwave Emission Modelling Platform (CMEM) are used to simulate L-band Brightness Temperatures (TBs) and compared to the SMOS TBs for 2010–2011. We show that simulated TBs are primarily sensitive, by order of importance, to the soil roughness model, the vegetation opacity and the soil dielectric model. In particular, best CMEM results are obtained with the simple Wigneron soil roughness model and the Wigneron model for the vegetation opacity. For the soil dielectric model, performances of the Wang and Schmugge and the Mironov models are shown to be similar and better than the Dobson model. The Wang and Schmugge model is then used in the next steps of this paper combined with the Wigneron roughness and vegetation models. The paper describes a multi-angular multi-polarised bias correction method based on a linear rescaling (mean and variance) computed at the monthly scale using SMOS observations and ECMWF-CMEM re-analysed TBs for a four year period (2010–2013). Results show that for 2010–2013 the seasonal multi-angular multi-polarisation bias correction approach reduces global RMSE to 7.91 K, compared to 16.7 K before bias correction, whereas the mean absolute bias is reduced to 1.39 K, compared to 11.04 K before bias correction. The consistency between the seasonality of simulated and the observed TBs is also improved by using a monthly bias correction, leading to correlation values improvement to 0.62 after bias correction compared to 0.56 before. The 2010–2013 bias correction applied to the 2014–2016 period at 40° incidence reduces the global RMSE from 15.56 K to 8.19 K, and the mean absolute bias from 10.16 K to 2.51 K, with no impact on the correlation values that remain at 0.61 in both cases. Long term monitoring of SMOS TB is presented covering a 7-year period (2010–2016) at both polarisations, at 40° incidence angle. Results show that the consistency between SMOS and ECMWF reanalysis-based TBs progressively improved between 2010 and 2016, pointing out improvements of level 1 SMOS TB products quality through the SMOS lifetime. • A forward operator is used to simulate L-band brightness temperatures. • Bias correction corrects differences between observations and model. • Multi-angular and seasonal matching of cumulative distribution function is developed. • Reanalysis of simulated forward brightness temperature used for SMOS monitoring. • Long term monitoring of SMOS brightness temperatures shows improved SMOS data quality. [ABSTRACT FROM AUTHOR]

Climate observations inform about the past and present state of the climate system. They underpin climate science, feed into policies for adaptation and mitigation, and increase awareness of the impacts of climate change. The Global Climate Observing System (GCOS), a body of the World Meteorological Organization (WMO), assesses the maturity of the required observing system and gives guidance for its development. The Essential Climate Variables (ECVs) are central to GCOS, and the global community must monitor them with the highest standards in the form of Climate Data Records (CDR). Today, a single ECV--the sea ice ECV--encapsulates all aspects of the sea ice environment. In the early 1990s it was a single variable (sea ice concentration) but is today an umbrella for four variables (adding thickness, edge/extent, and drift). In this contribution, we argue that GCOS should from now on consider a set of seven ECVs (sea ice concentration, thickness, snow depth, surface temperature, surface albedo, age, and drift). These seven ECVs are critical and cost effective to monitor with existing satellite Earth observation capability. We advise against placing these new variables under the umbrella of the single sea ice ECV. To start a set of distinct ECVs is indeed critical to avoid adding to the suboptimal situation we experience today and to reconcile the sea ice variables with the practice in other ECV domains. [ABSTRACT FROM AUTHOR]

The extension of the ERA5 reanalysis back to 1950 supplements the previously published segment covering 1979 to the present. It features the assimilation of additional conventional observations, as well as improved use of early satellite data. The number of observations assimilated increases from 53,000 per day in early 1950 to 570,000 per day by the end of 1978. Accordingly, the quality of the reanalysis improves throughout the period, generally joining seamlessly with the segment covering 1979 to the present. The fidelity of the extension is illustrated by the accurate depiction of the North Sea storm of 1953, and the events leading to the first discovery of sudden stratospheric warmings in 1952. Time series of ERA5 global surface temperature anomalies show temperatures to be relatively stable from 1950 until the late 1970s, in agreement with the other contemporary full-input reanalysis covering this period and with independent data sets, although there are significant differences in the accuracy of representing specific regions, Europe being well represented in the early period but Australia less so. The variability of ERA5 precipitation from month to month agrees well with observations for all continents, with correlations above 90% for most of Europe and generally in excess of 70% for North America, Asia and Australia. The evolution of upper air temperatures, humidities and winds shows smoothly varying behaviour, including tropospheric warming and stratospheric cooling, modulated by volcanic eruptions. The Quasi-Biennial Oscillation is well represented throughout. Aspects to be improved upon in future reanalyses include the assimilation of tropical cyclone data, the spin-up of soil moisture and stratospheric humidity, and the representation of surface temperatures over Australia. [ABSTRACT FROM AUTHOR]

Climate reanalyses provide a plethora of global atmospheric and surface parameters in a consistent manner over multi-decadal timescales. Hence, they are widely used in many fields, and an in-depth evaluation of the different variables provided by reanalyses is a necessary means to provide feedback on the quality to their users and the operational centres producing these data sets, and to help guide their development. Recently, the European Centre for Medium-Range Weather Forecasts (ECMWF) released the new state-of-the-art climate reanalysis ERA5, following up on its popular predecessor ERA-Interim. Different sets of variables from ERA5 were already evaluated in a handful of studies, but so far, the quality of land-surface energy partitioning has not been assessed. Here, we evaluate the surface energy partitioning over land in ERA5 and concentrate on the appraisal of the surface latent heat flux, surface sensible heat flux, and Bowen ratio against different reference data sets and using different modelling tools. Most of our analyses point towards a better quality of surface energy partitioning in ERA5 than in ERA-Interim, which may be attributed to a better representation of land-surface processes in ERA5 and certainly to the better quality of near-surface meteorological variables. One of the key shortcomings of the reanalyses identified in our study is the overestimation of the surface latent heat flux over land, which – although substantially lower than in ERA-Interim – still remains in ERA5. Overall, our results indicate the high quality of the surface turbulent fluxes from ERA5 and the general improvement upon ERA-Interim, thereby endorsing the efforts of ECMWF to improve their climate reanalysis and to provide useful data to many scientific and operational fields. [ABSTRACT FROM AUTHOR]

Within the Copernicus Climate Change Service (C3S), ECMWF is producing the ERA5 reanalysis which, once completed, will embody a detailed record of the global atmosphere, land surface and ocean waves from 1950 onwards. This new reanalysis replaces the ERA‐Interim reanalysis (spanning 1979 onwards) which was started in 2006. ERA5 is based on the Integrated Forecasting System (IFS) Cy41r2 which was operational in 2016. ERA5 thus benefits from a decade of developments in model physics, core dynamics and data assimilation. In addition to a significantly enhanced horizontal resolution of 31 km, compared to 80 km for ERA‐Interim, ERA5 has hourly output throughout, and an uncertainty estimate from an ensemble (3‐hourly at half the horizontal resolution). This paper describes the general set‐up of ERA5, as well as a basic evaluation of characteristics and performance, with a focus on the dataset from 1979 onwards which is currently publicly available. Re‐forecasts from ERA5 analyses show a gain of up to one day in skill with respect to ERA‐Interim. Comparison with radiosonde and PILOT data prior to assimilation shows an improved fit for temperature, wind and humidity in the troposphere, but not the stratosphere. A comparison with independent buoy data shows a much improved fit for ocean wave height. The uncertainty estimate reflects the evolution of the observing systems used in ERA5. The enhanced temporal and spatial resolution allows for a detailed evolution of weather systems. For precipitation, global‐mean correlation with monthly‐mean GPCP data is increased from 67% to 77%. In general, low‐frequency variability is found to be well represented and from 10 hPa downwards general patterns of anomalies in temperature match those from the ERA‐Interim, MERRA‐2 and JRA‐55 reanalyses. [ABSTRACT FROM AUTHOR]

Climate reanalyses provide a plethora of global atmospheric and surface parameters in a consistent manner over multi-decadal time scales. Hence, they are widely-used in many fields, and an in-depth evaluation of the different variables provided by reanalyses is a necessary means to provide feedback on the quality to their users and the operational centers producing these data sets, and to help guiding their development. Recently, the European Centre for Medium Range Weather Forecast (ECMWF) released the new state-of-the-art climate reanalysis ERA5, following up on its popular predecessor ERA-Interim. Different sets of variables from ERA5 were already evaluated in a handful of studies, but so far, the quality of surface energy partitioning has not been assessed yet. Here, we evaluate the surface energy partitioning over land in ERA5, and concentrate on the appraisal of the surface latent heat flux, surface sensible heat flux, and Bowen ratio against different reference data sets and using different modelling tools. Most of our analyses point towards a better quality of surface energy partitioning in ERA5 than in ERA-Interim, which may be attributed to a better representation of land-surface processes in ERA5, and certainly to the better quality of near-surface meteorological variables. One of the key shortcomings of the reanalyses identified in our study is the overestimation of the surface latent heat flux, which - although substantially lower than in ERA-Interim - still remains in ERA5. Overall, our results indicate the high quality of the surface turbulent fluxes from ERA5 and the general improvement upon ERA-Interim, thereby endorsing the efforts of ECMWF to improve their climate reanalysis and to provide useful data to many scientific and operational fields. [ABSTRACT FROM AUTHOR]

The aim of Copernicus Climate Change Service (C3S) is to supply reliable climate data in support of strategies to adaptation and mitigation to climate change. The C3S provides access to high-quality climate data through its Climate Data Records (CDRs) of atmospheric, marine and land Essential Climate Variables (ECVs). Global Earth Surface Albedo (SA) satellite-based products are included in the land (biosphere) portfolio. SA is a magnitude which quantifies the fraction of solar energy reflected by the surface of the Earth. This paper details the retrieval methodology and preliminary validation results for global estimates of surface albedo based on Sentinel-3 observations for the C3S ECVs data (C3S SA v3.0). The retrieval algorithm exploits the synergistic use of the Ocean and Land Colour Instrument (OLCI) and the Sea and Land Surface Temperature Radiometer (SLSTR) on-board Sentinel-3 A and B satellites. Firstly, the atmospherically corrected reflectances are generated in the Copernicus Global Land Service framework. After that, the Bidirectional Reflectance Distribution Function (BRDF) inversion module concludes the BRDF model parameters, which are transferred to the angular integration module in order to generate spectral albedo quantities for the selected OLCI (Oa03, Oa04, Oa07, Oa17 and Oa21) and SLSTR (S1, S2, S5 and S6) bands. At the end, the spectral integration module generates broadband albedo quantities in three different standard broadband spectral regions (visible [0.4μ m − 0.7μ m ], near infrared [0.7μ m − 4μ m ] and total shortwave [0.3μ m − 4μ m ]). Preliminary validation results over 10-months demonstration period (July 2018–April 2019) show, in terms of spatial and temporal consistency, that C3S Sentinel-3 SA global estimates reached in general good agreement as compared to other satellite operational references derived from MODIS (MCD43A3 C6) and PROBA-V (C3S PROBA-V SA v1.0) acquisitions. The comparison with ground data shows similar results to the MCD43A3 C6 comparisons but opposite sign in differences (marginally positive in case of Sentinel-3), with accuracy of 0.005 (3.7%), precision of 0.016 (11.3%) and uncertainty of 0.032 (22.7%). Our results have demonstrated the feasibility to estimate global fields of SA from Sentinel-3 observations, with similar quality of existing operational products. These Sentinel-3 based SA datasets will give the continuity to the existing C3S SA CDR, introducing improvements in terms of spatial resolution (300 m) and spectral information (9 spectral albedos) in contrast to previous datasets based on Advanced Very High Resolution Radiometer (AVHRR; 4 km, 4 channels) and Vegetation instruments (VGT; 1 km, 4 channels). • Retrieval method for global surface albedo estimates from Sentinel-3 is proposed. • Algorithm is based on BRDF inversion, angular and spectral integration. • A cross-comparison with MODIS and PROBA-V satellite products is performed. • The direct validation includes comparison with spatially representative ground data. [ABSTRACT FROM AUTHOR]

Land surface processes and their initialisation are of crucial importance for Numerical Weather Prediction (NWP). Current land data assimilation systems used to initialise NWP models include snow depth analysis, soil moisture analysis, soil temperature and snow temperature analysis. This paper gives a review of different approaches used in NWP to initialise land surface variables. It discusses the observation availability and quality, and it addresses the combined use of conventional observations and satellite data. Based on results from the European Centre for Medium-Range Weather Forecasts (ECMWF), results from different soil moisture and snow depth data assimilation schemes are shown. Both surface fields and low-level atmospheric variables are highly sensitive to the soil moisture and snow initialisation methods. Recent developments of ECMWF in soil moisture and snow data assimilation improved surface and atmospheric forecast performance. [ABSTRACT FROM AUTHOR]

The Copernicus Climate Change Service (C3S) includes estimates of Essential Climate Variables (ECVs) as a series of Climate Data Records (CDRs) derived from satellite data. The C3S Surface Albedo (SA) v1.0 CDR is composed of observations from National Oceanic and Atmospheric Administration (NOAA) Very High Resolution Radiometers (AVHRR) (1981–2005), and VEGETATION sensors onboard Satellites for the Observation of the Earth (SPOT/VGT) (1998–2014) and Project for Onboard Autonomy satellite (PROBA-V) (2014–2020), and will continue with Sentinel-3 (from 2020 onwards). The goal of this study is to assess the uncertainties associated with the C3S PROBA-V SA v1.0 product, with a focus on the transition from SPOT/VGT to PROBA-V. The methodology followed the good practices recommended by the Land Product Validation sub-group (LPV) of the Working Group on Calibration and Validation (WGCV) of the Committee on Earth Observing Satellites (CEOS) for the validation of satellite-derived global albedo products. Several performance criteria were evaluated, including an intercomparison with National Aeronautics and Space Agency (NASA) MCD43A3 C6 products. C3S PROBA-V SA v1.0 and MCD43A3 C6 showed similar completeness but had higher fractions of missing data than C3S SPOT/VGT SA v1.0. C3S PROBA-V SA v1.0 showed similar precision (~1%) to MCD43A3 C6, improving the results of SPOT/VGT SA v1.0 (2–3%), but C3S PROBA-V SA v1.0 provided residual noise in the near-infrared (NIR). Good spatio-temporal continuity between C3S PROBA-V and SPOT/VGT SA v1.0 products was found with a mean bias between ±2%. The comparison with MCD43A3 C6 showed positive mean biases (5%, 8%, and 12% for visible, NIR and total shortwave, respectively). The accuracy assessment with ground measurements showed a median error of 18.4% with systematic overestimation (positive bias of 11.5%). The percentage of PROBA-V retrievals complying with the C3S target requirements was 28.6%. [ABSTRACT FROM AUTHOR]

At the European Centre for Medium-Range Weather Forecasts (ECMWF), reanalysis is a key contribution to the Copernicus Climate Change Service (C3S) that is implemented at ECMWF on behalf of the European Commission.The role of reanalyses in climate monitoring applications is now widely recognized. ECMWF's reanalysis ERA-Interim is periodically used, together with other datasets, as input to the World Meteorological Organization (WMO) annual assessment of the State of the Climate, routinely presented at the Conference of the Parties of the United Nations Framework Convention on Climate Change (UNFCCC). ERA-Interim is also a resource for the production of Essential Climate Variables (ECVs) and Climate Indicators recommended by the Global Climate Observing System (GCOS). By optimally combining observations and models, reanalyses indeed provide consistent "maps without gaps" of ECVs and strive to ensure integrity and coherence in the representation of the main Earth system cycles (e.g. water, energy).This presentation focuses on the new ECMWF reanalysis ERA5, providing global estimates of the atmosphere, ocean waves and land surface quantities. It is produced at considerably higher resolution than ERA-Interim: hourly products are available at a horizontal resolution of 31 km on 137 levels in the vertical. ERA5 is publicly available from 1979 via the C3S Climate Data Store. A pre-extension back to 1950 is currently in production.Vast numbers of observations are assimilated using 4D-Var, both in situ and from satellites, that, jointly, are sensitive to a wide range of geophysical quantities throughout the atmosphere. ERA5 follows the evolution of greenhouse gases, volcanic eruptions, ozone and aerosols, as recommended by CMIP5. It uses a consistent reconstruction for sea-surface temperature and sea ice. ERA5 data products also include information about uncertainties, which is provided by a lower-resolution 10-member 4D-Var ensemble.The assimilation method includes a variational method for estimating observation biases that respects the heterogeneity within the observing system. This on one hand provides ERA5 products that are less sensitive to inhomogeneities and biases in its input data. On the other hand, the resulting bias estimates also provide a path towards more homogeneous long-term observational records.Updates are produced close to real time, which allow for an accurate and up-to-date climate monitoring, and provide information on climate variability, trends and extremes. As such, C3S publishes monthly-updated climate bulletins (https://climate.copernicus.eu/climate-bulletins), incorporating a global and European monitoring report covering surface air temperature, sea-ice and hydrological climate variables. [ABSTRACT FROM AUTHOR]

Land surface models (LSMs) have traditionally been designed to focus on providing lower boundary conditions to the atmosphere with less focus on hydrological processes. State of the art application of LSMs include land data assimilation system (LDAS) which incorporates available land surface observations to provide an improved realism of initial surface conditions. While improved representations of the surface variables (such as soil moisture and snow depth) make LDAS an essential component of any Numerical Weather Prediction (NWP) system, the related increments remove or add water, potentially having a negative impact on the simulated hydrological cycle by opening the water budget.This work focuses on evaluating how well NWP configurations are able to support hydrological applications, such as the Global Flood Awareness System, in addition to the traditional weather forecasting. River discharge simulations from two climatological reanalyses, based on ECMWF's new ERA5 dataset, were compared: one 'online' set which includes land-atmosphere coupling and LDAS with an open water budget, and also an 'offline' set with a closed water budget and no LDAS. From these two datasets, a range of hydrological and atmospheric variables were analysed globally.It was found that while the online version of the model with land-atmosphere coupling and LDAS largely improves temperature and snow depth conditions, it causes significant discharge biases in certain areas and poorer representation of peak river flow, particularly in snowmelt-dominated areas in the high latitudes. For example, the systematic negative increments in snow covered areas seem to correct for a significant weakness of the current ECMWF LSM snow scheme, which melts the snow too slowly. Without addressing such issues there will never be confidence in using LSMs for hydrological forecasting applications across the globe. This type of analysis should be used to diagnose where improvements need to be made; considering the whole Earth System in the data assimilation and coupling developments is critical for moving towards the goal of holistic Earth System approaches. [ABSTRACT FROM AUTHOR]