Search

The investigation of upper mantle structure beneath the US has revealed a growing diversity of discontinuities within, across, and underneath the sub‐continental lithosphere. As the complexity and variability of these detected discontinuities increase—for example, velocity increase/decrease, number of layers and depth—it is hard to judge which constraints are robust and which explanatory models generalize to the largest set of constraints. Much work has been done to image discontinuities of interest using S‐waves that convert to P‐waves (or top‐side reflected SS waves). A higher resolution method using P‐to‐S scattered waves is preferred but often obscured by multiply reflected waves trapped in a shallower layer, limiting the visibility of deeper boundaries. Here, we address the interference problem and re‐evaluate upper mantle stratification using filtered P‐to‐S receiver functions (Ps‐RFs) interpreted using unsupervised machine‐learning. Robust insight into upper mantle layering is facilitated with CRISP‐RF: Clean Receiver‐Function Imaging using Sparse Radon Filters. Subsequent sequencing and clustering organizes the polarity‐filtered Ps‐RFs into distinct depth‐based clusters. We find three types of upper mantle stratification beneath the old and stable continental US: (a) intra‐lithosphere discontinuities (paired or single boundary), (b) transitional discontinuities (single boundary or with a top layer), and (c) sub‐lithosphere discontinuities. Our findings contribute a more nuanced understanding of mantle discontinuities, offering new perspectives on the nature of upper mantle layering beneath continents. Plain Language Summary: Early investigations of the mantle rocks in the US indicate intricate layering. However, uncertainties remain regarding the origins of these structures. Here, we re‐examine mantle rock stratification using a fine‐resolution approach. We use short waves that improve our ability to identify the depth of thin layers and sharp transitions in rock properties. Until now, these methods haven't been used due to interference with waves trapped in the near‐surface layers. We address this problem with machine learning and the CRISP‐RF (Clean Receiver Function Images Using Sparse Radon‐Filters) method. CRISP‐RF filters out the waves trapped in the crust and machine learning reveals spatially coherent patterns. Underneath the stable continents, we find evidence for different types of rock layering: (a) reflectors within cold stiff rocks (b) reflectors at depth ranges where the rocks become warmer and flow more readily, and (c) reflectors at depths farther down in the upper mantle. Our approach enables the test of hypotheses about the origins of upper mantle layering beneath continents. Key Points: Upper mantle stratification is constrained using Clean Receiver‐function Imaging using Sparse Radon Filters and machine learningStratification is classified into intra‐lithospheric, transitional and sub‐lithosphericHigh‐resolution constraints allow the evaluation of different causal models [ABSTRACT FROM AUTHOR]

Seismic interrogation of the upper mantle from the base of the crust to the top of the mantle transition zone has revealed discontinuities that are variable in space, depth, lateral extent, amplitude and lack a unified explanation for their origin. Improved constraints on the detectability and properties of mantle discontinuities can be obtained with P-to-S receiver function (Ps-RF) where energy scatters from P to S as seismic waves propagate across discontinuities of interest. However, due to the interference of crustal multiples, uppermost mantle discontinuities are more commonly imaged with lower resolution S-to-P receiver function (Sp-RF). In this study, a new method called CRISP-RF (Clean Receiver-function Imaging using SParse Radon Filters) is proposed, which incorporates ideas from compressive sensing and model-based image reconstruction. The central idea involves applying a sparse Radon transform to effectively decompose the Ps-RF into its underlying wavefield contributions, that is direct conversions, multiples, and noise, based on the phase moveout and coherence. A masking filter is then designed and applied to create a multiple-free and denoised Ps-RF. We demonstrate, using synthetic experiment, that our implementation of the Radon transform using a sparsity-promoting regularization outperforms the conventional least-squares methods and can effectively isolate direct Ps conversions. We further apply the CRISP-RF workflow on real data, including single station data on cratons, common-conversion-point stack at continental margins and seismic data from ocean islands. The application of CRISP-RF to global data sets will advance our understanding of the enigmatic origins of the upper mantle discontinuities like the ubiquitous mid-lithospheric discontinuity and the elusive X-discontinuity. [ABSTRACT FROM AUTHOR]

The Earth, in large portions, is covered in oceans, sediments, and glaciers. High‐resolution body wave imaging in such environments often suffers from severe reverberations, that is, repeating echoes of the incoming scattered wavefield trapped in the reverberant layer, making interpretation of lithospheric layering difficult. In this study, we propose a systematic data‐driven approach, using autocorrelation and homomorphic analysis, to solve the twin problem of detection and elimination of reverberations without a priori knowledge of the elastic structure of the reverberant layers. We demonstrate, using synthetic experiments and data examples, that our approach can effectively identify the signature of reverberations even in cases where the recording seismic array is deployed in complex settings, for example, using data from (a) a land station sitting on Songliao basin, (b) an ocean bottom station in the fore‐arc setting of the Alaska amphibious community seismic experiment, and (c) a station deployed on ice‐sediment strata in the glaciers of Antarctica. The elimination of the reverberation is implemented by a frequency domain filter whose parameters are automatically tuned using seismic data alone. On glaciers where the reverberating sediment layer is sandwiched between the lithosphere and an overlying ice layer, homomorphic analysis is preferable in detecting the signature of reverberation. We expect that our technique will see wide application for high‐resolution body wave imaging across a wide variety of conditions. Plain Language Summary: The Earth, in large portions, is covered in oceans, sediments, and glaciers. Because of the large differences in rock properties between these layers and the solid Earth underneath, waves get trapped in them which hampers the successful investigation of deeper layers. This is often referred to as "reverberation," waves that "echo" or "sing" again and again. In this study, we propose a systematic approach to detect and eliminate this "singing" effect using only observed data, without any knowledge of the local geological structure. Our approach extends the autocorrelation analysis, a widely used method to detect repeating patterns in time series, and also takes advantage of the homomorphic analysis, a popular technique in speech and audio processing. We demonstrate the effectiveness of our approach using both human‐generated and real seismic data, collected from complex geosettings around the world, including in the oceans to the south of the Alaska Peninsula, sedimentary basin in northeast China, and Antarctica. On glaciers where the reverberation comes from the complicated coupled effect of ice and sediment, homomorphic analysis is preferable in detecting the signature of reverberation. We expect that our technique will greatly improve the imaging of deep Earth structure across a wide variety of conditions. Key Points: A data‐driven approach using autocorrelation and homomorphic analysis is proposed to detect the signature of reverberations in seismic dataThe proposed approach can be applied to various geological settings where reverberations are present; that is, sediments, oceans, and glaciersSignal enhancement using either approach is best in single‐layer systems, while homomorphic analysis is preferred for ice‐sediment systems [ABSTRACT FROM AUTHOR]

While the receiver function technique has been successfully applied to high‐resolution imaging of sharp discontinuities within and across the lithosphere, it suffers from severe limitations when applied to seafloor seismic recordings. This is because the water and sediment layer could strongly influence the receiver function traces, making detection and interpretation of crust and mantle layering difficult. This effect is often referred to as the singing phenomena in marine environments. We demonstrate, using analytical and synthetic modeling, that this singing effect can be reversed using a selective dereverberation filter tuned to match the elastic property of each layer. We apply the dereverberation filter to high‐quality earthquake records collected from the NoMelt seismic array deployed on normal, mature Pacific seafloor. An appropriate filter designed using the elastic properties of the underlying sediments, obtained from prior studies, greatly improves the detection of Ps conversions from the Moho (∼8.6 km) and from a sharp discontinuity (<∼5 km) across the lithosphere asthenosphere transition (∼72 km). Sensitivity tests show that the dereverberation filter is mostly sensitive to the two‐way travel time of the shear wave in sediment and is robust to seismic noise and small errors in the sediment properties. Our analysis suggests that selectively filtering out the sediment reverberations from ocean seismic data could make inferences on subsurface structure more robust. We expect that this study will enable high‐resolution receiver function imaging of the oceanic plate across the growing ocean bottom seismic arrays being deployed in the global oceans. Key Points: A dereverberation filter is proposed to eliminate the sediment reverberation effects on receiver functions of ocean bottom seismological dataThe proposed filter is proven effective and robust to small errors in sediment properties using synthetic modelingA Moho of 8.6 km depth and a sharp discontinuity of the lithosphere asthenosphere transition of 72 km depth is observed [ABSTRACT FROM AUTHOR]

The stable continents have a puzzling structure. Recent seismological studies have revealed a marked drop in seismic velocity at middle-lithosphere depths, but a generally small velocity drop at the lithosphere-asthenosphere boundary. The mid-lithosphere discontinuity has previously been attributed to changes in composition and/or crystal alignment (anisotropy) caused by metasomatic alteration, as well as to partial melting and/or accretion of intruded materials that occurred after the formation of the continents. We show that these models cannot easily explain the global presence of a large seismic velocity drop in the middle lithosphere and a small velocity change at the lithosphere-asthenosphere boundary. These models are also difficult to reconcile with long-term continental stability and, in particular, observations of nearly depth-invariant ages of rocks in the continental lithosphere that do not support the notion of late alteration events. Instead, we propose an elastically accommodated grain-boundary sliding model that predicts a substantial velocity drop at the mid-lithosphere discontinuity and a weak seismic signal at the lithosphere-asthenosphere boundary, as observed, without invoking late-stage modifications to the lithosphere. In this model, the mid-lithosphere discontinuity is a general feature of the stable continents, the precise depth of which depends primarily on temperature and water content. Consequently, the depth of the mid-lithosphere discontinuity may provide clues to the evolution of continents. [ABSTRACT FROM AUTHOR]

West Africa continues to host a growing number of low and intermediate‐magnitude earthquakes (M2‐5) along its passive margins, and its continental interior. Earthquake activity in these regions raises the need to comprehend the causes and the tectonic controls of the seismicity. Unfortunately, such studies are rare. Here, we apply single‐station inversion techniques to constrain fourteen focal mechanisms, computed after compiling a set of high‐quality waveforms. We describe the connection between seismicity, the contemporary stress field, anthropogenic activity and Holocene fault scarps in the region. Our results indicate transpressive stresses acting on the inherited brittle structures in the passive margins. We also observe a compressive regime in the intracontinental failed rifts. We attribute the seismicity to the reactivation of "weak" faults in the Neoproterozoic and Mesozoic failed rifts, the passive transform structures, and the intracratonic Precambrian brittle shear zones. Plain Language Summary: Earthquakes have occurred in West Africa, in the interior and the edges of regions that host several brittle structures. The causes and the mechanisms of this seismicity have not been comprehensively investigated. Hence, the characteristics of the regional tectonics are not fully established. In this study, we resolve the properties of the source of earthquakes, and the regional stress field. Our description of the sources of earthquakes matches the geometry of inherited brittle shear zones and failed rifts. The results indicate a strong influence of transpressive stress transfers from the ocean to the passive margins of West Africa. In the continental interior, especially, the West African Belt, the stress is compressional in the E‐W direction, consistent with stress orientations in adjoining regions. An extensional earthquake is observed in Mali, within the Gourma failed rift. We find that the seismicity of West Africa and the variations of the stress can be explained by the combination of preexisting faults, plate forces, ocean‐continent stress transfer, and density heterogeneity across the geologic domains. Key Points: Improved constraints on stress regimes and stress orientations from inversion of new focal mechanisms of M < 5.5 earthquakesNew focal mechanisms obtained from classical and novel approach based on single station waveform inversionEarthquakes in West Africa are rupturing the passive margin faults, intracontinental failed rift faults, and brittle shear zones [ABSTRACT FROM AUTHOR]

Seismic imaging with converted body waves has been used to infer layering within the globallithosphere leading to observations of a globally ubiquitous boundary known as themid-Lithosphere discontinuity (MLD). Explanatory models include partial melt/chemicalstratification, anisotropy, and elastically-accommodated grain-boundary sliding; each withunique implications for the geological evolution of continents. We present a new method forinvestigating these hypotheses, using a parametric approach which involves stacking ofthree-component earthquake-source deconvolved- receiver function traces.We conduct a statistical parameter search to determine the lithospheric discontinuity depth(H), the wave-speed ratio (κ), and order,φ, of harmonic back-azimuth variations, whichcan distinguish conversions from sub-crustal layers with anisotropic media. We demonstratethe procedure with a pilot study of synthetic waveforms and long-running seismic stationslocated in the Precambrian region of the US. We target sub-crustal depths, and distinguishbetween free surface reverberations, using a suite of high-resolution crustal 1D (PREM,IASP91, AK135) and 3D models (Crust1.0, LITHO1.0, and EMC-US.2016) velocity models.The results have important implications for the origin of the MLD and the approach can beused to study other cratonic regions globally. [ABSTRACT FROM AUTHOR]