Search

Summary: This paper suggests a nonisolated noncoupled inductor‐based topology for direct current (DC)–DC converters for DC microgrids. The proposed configuration profits from advantages like high step‐up capability, continuous input current, simple structure, reduced normalized standing voltage (NSV) on switches/diodes, large gain per devices, common ground point between source‐load, and maximum power point tracking (MPPT) capability. Both the switches (T1, T2) are turned on/off simultaneously, which minimizes the number of operational modes and simplifies the control strategy. These properties lead to a more compact, less expensive, and lighter topology. The operational modes and steady‐state analysis as well as design considerations have been presented in detail. According to comparative analysis, the voltage conversion ratio per number of devices in suggested topology is higher than that of other similar topologies addressed in literature. The simulation results extracted from PSCAD/EMTDC software and the experimental outcomes obtained from laboratory‐scale prototype confirm the effectiveness and correct performance of proposed topology. [ABSTRACT FROM AUTHOR]

In this paper, a developed structure is proposed for high step-up nonisolated noncoupled inductor based multiport dc–dc converters. The voltage gain per number of devices of the proposed topology is higher than that of similar topologies. This means that, by using the same number of devices, the proposed topology can generate higher gains than other structures. In other words, the proposed topology utilizes less number of devices for producing the same voltage gain, which leads to less total cost, size, weight, and complexity. Despite high voltage gain, the normalized peak inverse voltage (NPIV) on switches/diodes is low. Higher number of input ports leads to higher gains and lower NPIVs on devices. The load energy can be absorbed and stored in first input unit. Modularity, simple structure, continuous input currents, and low input current ripple are the other profits of proposed topology. Low/medium power applications are suggested for the proposed structure. Proposed topology has been explained and operational modes along with steady-state analysis have been discussed. For better verification, the proposed topology has been compared with several multiport high gain converters. Comparison results confirm the advantages of the proposed topology. Finally, the proper performance of the proposed topology has been validated by experimental results. [ABSTRACT FROM AUTHOR]