Search

Pancreatic ductal adenocarcinoma (PDAC) has a high recurrence rate even after radical resection because of subclinical tumors. To manage them, a reliable biomarker that can indicate the presence of subclinical tumors and predict their chemosensitivity is required. This study aimed to identify a miRNA as a biomarker that can be used to individualize postoperative adjuvant chemotherapy using postoperative peripheral blood samples. Integrating miRNA microarray data from the blood of 18 patients with PDAC and the in vitro results regarding the phenotypes of chemoresistant PDAC cells, a candidate miRNA was identified. The relationships between candidate miRNA expression and chemosensitivity were examined in vitro and in clinical samples from other cohorts of 33 patients with recurrence. Comprehensive analyses of blood samples detected 5 candidate miRNAs. Of these, miR-26a-5p was considered a candidate biomarker of chemosensitive phenotypes. In validation experiments, chemosensitivity was inversely correlated with miR-26a-5p expression in vitro. Moreover, the ability of miR-26a-5p to predict chemosensitivity was clinically evaluated using blood samples. Patients with high miR-26a-5p expression in the blood after radical resection exhibited a significantly longer survival time after recurrence. Thus, we concluded that miR-26a-5p is a potentially useful biomarker for managing patients with PDAC, especially those undergoing adjuvant chemotherapy. [ABSTRACT FROM AUTHOR]

Background. Metal hypersensitivity is a rare complication after total hip arthroplasty (THA), and no reliable diagnostic method for metal hypersensitivity to orthopedic metal implants has yet been established. Case report. A 57-year-old woman underwent hemiarthroplasty using a metal implant despite a skin allergy to metal jewelry. Two years after surgery, the patient developed early hemiarthroplasty failure and refractory erythema. Although the patient was clinically suspected to have a hypersensitivity to metal, the preoperative screening test was negative, and patient underwent revision surgery with cemented THA. Postoperatively, the erythema as well as her hip pain disappeared completely. Conclusion. Patients with clinically suspected metal hypersensitivity should undergo primary and revision total hip arthroplasty using hypoallergenic implants regardless of preoperative screening results. [ABSTRACT FROM AUTHOR]

Purpose: The purpose of the present study was to investigate the results of total hip arthroplasty (THA) using the Bicontact D stem with a minimum 10 year follow-up that focused on patients with developmental dysplasia of the hip (DDH). Methods: One hundred five patients with osteoarthritis due to DDH who underwent primary THA were included in this study. The mean final follow-up period was 12.7 ± 1.2 years (range 10–15 years). All cases were evaluated both clinically and radiographically, and Kaplan–Meier survivorship was determined as stem revision for any reason as the end point. Results: Modified Harris hip score averaged 89.0 ± 1.1 (range 60–98) at the final follow-up. The survivorship was 99.0% (95% confidence interval 93.4–99.9%) at 15.0 years, and only one hip with a well-fixed stem required stem revision due to recurrent dislocations. Cortical hypertrophy (CH) was observed in 40 of 105 hips (38.1%), and stress shielding (SS) progressed to grade 3 or 4 in six hips (6 of 105 hips: 5.7%) during the study period. Among the six hips with progressed SS, Dorr type C proximal femoral geometry was seen in five hips. Conclusion: This study of 105 THAs using the Bicontact D stem that focused on DDH patients with a minimum 10 year follow-up period achieved satisfactory clinical and radiological outcomes. Dorr type C proximal femoral geometry could be considered a risk factor for progressed SS. [ABSTRACT FROM AUTHOR]

Case. A 20-year-old woman with severe subluxation of the hip displayed a leg length discrepancy of approximately 20 mm. The proposed treatment was a spherical periacetabular osteotomy (SPO) for joint preservation and postoperative leg length maintenance. SPO is a novel periacetabular osteotomy procedure. At her 3-year follow-up, the patient had functional, pain-free motion and high satisfaction. In this case, the SPO technique was able to achieve satisfactory clinical results without further exacerbating the leg length discrepancy after surgery. [ABSTRACT FROM AUTHOR]

Purpose: Chronic progressive external ophthalmoplegia (CPEO) is a mitochondrial disease characterized by slowly progressive ptosis and limitations in ocular motility. Although exophthalmos is not considered to be a common feature of CPEO, this study focused on the incidence of exophthalmos in patients with CPEO. Study design: Retrospective observational case series Methods: We reviewed the clinical charts of patients who received a diagnosis of CPEO sometime during the period between January 2010 and December 2018. CPEO was diagnosed on the basis of detection of a deletion of mitochondrial DNA (mtDNA) from saliva, buccal mucosa, or extraocular muscle specimens obtained during strabismus surgery. Horizontal MRI/CT images or Hertel ophthalmometry was used in determining exophthalmos. Results: Seven patients (4 males) were identified. The mean age at diagnosis was 32.6 years (range 13–53 years). mtDNA deletion mutations were detected in the buccal mucous membrane DNA in 5 patients and in the saliva and extraocular muscle DNA in 2 patients. MRI/CT was recorded in 6 patients, four of whom showed exophthalmos (cases 1–4), and case 5 was determined as exophthalmos on the basis of a Hertel ophthalmometer reading. Exophthalmos was bilateral in 4 of the patients (cases 1, 2, 4, and 5) and unilateral in 1 patient (case 3). Exophthalmos was the chief concern of 2 of the patients; however, it was not clinically significant in the other patients. Conclusions: Although exophthalmos may not be recognized by either the patient or the clinician, it may be one of the common features of CPEO. A large multiethnic study should be performed. [ABSTRACT FROM AUTHOR]

Xanthogranulomatous cholecystitis (XGC) is a rare inflammatory disease of the gallbladder with distinct histopathological characteristics. Laparoscopic cholecystectomy (LC) is currently the standard treatment for gallbladder disease. However, the outcomes of LC for XGC have not been completely investigated, due to the rarity of XGC. The present study aimed to assess the surgical outcomes of LC for XGC. Among 3,037 patients undergoing cholecystectomy between 2005 and 2017 at our institution, 58 patients (1.9%) were diagnosed with XGC based on histopathology. Of the patients, LC was performed in 38 (65.5%), and they were enrolled in the present study. The outcome of LC for XGC in the cases was assessed, and was compared with outcomes of LC for other diseases. The average operation time was 109±36 min, and average intraoperative blood loss was 58±85 ml. LC was converted to open cholecystectomy in 6 (15.8%) of the 38 cases. No operative mortality occurred. One patient developed postoperative complications greater than grade II in the Clavien-Dindo classification, and the mean postoperative hospital stay was 6.1±5.8 days. Based on previous reports and the nature of XGC itself, the outcomes reported herein of LC for XGC seemed acceptable. It should be also noted that LC for XGC exhibited a higher conversion rate compared with LC than other benign gallbladder diseases, implying that LC for XGC remains challenging. [ABSTRACT FROM AUTHOR]

This study provides a parallel algorithm for meshfree analysis based on the radial point interpolation method. This algorithm is designed to suit graphics hardware that support compute unified device architecture, NVIDIA's software development environment on graphics processing units (GPUs). The radial point interpolation method is a meshfree method that enables strict imposition of Dirichlet boundary conditions, and it mainly consists of two steps: the process for assembly of the discrete linear system and the process for solving the linear system. This paper shows that both the processes can be performed effectively on the GPU by applying our parallel algorithm and at the same time, the costs for data transfer to and from the GPU can be reduced, because the processes related to the discrete linear system are performed independently on the GPU. Our numerical tests confirm that the algorithm performed on the GPU accelerates the computations by a factor of maximum 15. [ABSTRACT FROM PUBLISHER]

Abstract: One of the most important points in structural design of containerships is the strength of hatch corners. Formerly, hatch corners used to be assessed by combining the component induced by hull girder vertical bending and the component induced by hull girder torsion. In the design of new generation containerships without deck girders, the effect of cross deck fore-aft deflection has also become prominent. Another point is the impact of structural displacement on the deck fittings. About new generation ships, large fore-aft deflection of cross decks raised the new problem of interference of hatch covers, lashing bridges and other deck fittings. To cope with such problems, comprehensive analysis has been carried out during the design stage of a Post-Panamax containership. In parallel with this analysis, on-board measurement had been conducted for 3 years after delivery, in order to confirm wide varieties of structural reaction of a large container ship in seaways. Procedure to derive components of stress and deformations from selected measurement points was developed, and actual values were calculated based on actual measurement. From long-term prediction of each component, it was found that design assumption was in general appropriate. However, regarding the fore-aft deflection of cross deck strip, actual stack load is generally much smaller than the design value, and the resulting predicted extreme value was much smaller than design assumption. This factor should be taken into account in the design stage. Regarding the correlation between hull girder vertical bending and fore-aft deflection of cross deck strip, design assumption of full combination is too conservative. From the measurement, no explicit correlation was observed. Regarding the correlation between hull girder vertical bending and wave induced torsion, design assumption of no correlation was appropriate. From these results, new formulae to combine these three deflection modes were proposed. Whipping was observed in the measured data, indicating that more careful attention should be paid to avoid large stress concentration in deck area to enhance fatigue strength. [Copyright &y& Elsevier]

One-carbon (1C) metabolism plays a key role in biological functions linked to the folate cycle. These include nucleotide synthesis; the methylation of DNA, RNA, and proteins in the methionine cycle; and transsulfuration to maintain the redox condition of cancer stem cells in the tumor microenvironment. Recent studies have indicated that small therapeutic compounds affect the mitochondrial folate cycle, epitranscriptome (RNA methylation), and reactive oxygen species reactions in cancer cells. The epitranscriptome controls cellular biochemical reactions, but is also a platform for cell-to-cell interaction and cell transformation. We present an update of recent advances in the study of 1C metabolism related to cancer and demonstrate the areas where further research is needed. We also discuss approaches to therapeutic drug discovery using animal models and propose further steps toward developing precision cancer medicine. [ABSTRACT FROM AUTHOR]

Exosomes (EXs), a type of extracellular vesicles secreted from various cells and especially cancer cells, mesenchymal cells, macrophages and other cells in the tumor microenvironment (TME), are involved in biologically malignant behaviors of cancers. Recent studies have revealed that EXs contain microRNAs on their inside and express proteins and glycolipids on their outsides, every component of which plays a role in the transmission of genetic and/or epigenetic information in cell-to-cell communications. It is also known that miRNAs are involved in the signal transduction. Thus, EXs may be useful for monitoring the TME of tumor tissues and the invasion and metastasis, processes that are associated with patient survival. Because several solid tumors secrete immune checkpoint proteins, including programmed cell death-ligand 1, the EX-mediated mechanisms are suggested to be potent targets for monitoring patients. Therefore, a companion therapeutic approach against cancer metastasis to distant organs is proposed when surgical removal of the primary tumor is performed. However, EXs and immune checkpoint mechanisms in pancreatic cancer are not fully understood, we provide an update on the recent advances in this field and evidence that EXs will be useful for maximizing patient benefit in precision medicine. [ABSTRACT FROM AUTHOR]

Purpose: In the combined anteversion (CA) technique for total hip arthroplasty (THA) with a cementless stem, cup anteversion is strongly influenced by the native femoral anteversion. It is hypothesized that in cases with large native femoral anteversion, cup anteversion can be decreased, and anterior cup protrusion from the anterior edge of the acetabulum could occur due to the achievement of optimal CA. In this study, the accuracy of CA in THA with the CA technique using imageless navigation and the relationship between the protrusion of the anterior edge of cup and optimum CA was retrospectively evaluated. Methods: Ninety-seven patients (104 hips) who underwent primary THA by the CA technique using image-free navigation were enrolled in the study. The femoral stem was placed following the individual femoral anteversion so that the target cup anteversion could be determined following a mathematical formula (37 = femoral stem anteversion × 0.7 + cup anteversion). Results The resulting CA values effectively achieved accurate CA with 39.49 ± 5.03° postoperatively. On the other hand, anterior cup protrusion was measured by computed tomography image. A cup protrusion length of more than 3 mm was indicated for 60 cases (57.7%). All included patients were divided into two groups: Group 1 as protrusion positive and Group 2 as protrusion negative. In Group 1, preoperative femoral anteversion and postoperative stem anteversion were significantly higher, while postoperative cup anteversion was significantly lower. However, the postoperative CA value indicated no significant difference between the groups. Conclusions: The CA (stem-first) technique with image-free navigated THA could effectively achieve accurate CA. On the other hand, a large number of cases revealed anterior cup protrusion due to the low cup anteversion. [ABSTRACT FROM AUTHOR]

Background: The number of hemodialysis patients has been progressively increasing in our country. On the other hand, chronic hip arthropathy associated with long-term hemodialysis is a devastating problems affecting patients' quality of life. In our previous study, we proposed a classification system for radiological abnormalities seen in hemodialysis-related hip lesions. The purpose of the study was to propose the surgical strategy for hip disorders caused by long-term hemodialysis.Methods: Patients with a history of hemodialysis for more than 10 years, 191 hip lesions in 165 consecutive patients who visited our institute due to hip symptoms. Various abnormalities were identified in 116 out of 191 hips. A retrospective assessment of the patient record and radiographs was performed for the included subjects examining the natural course of the disease process as well as the results of surgical treatment.Results: Seventy-six hip lesions (69.0%) were conservatively managed at the time of the initial visit. Surgeries were performed for 75 hips (64.7%) during the study period. Among those, surgical treatment was indicated for 40 hips at the time of the initial visit. On the other hand, surgeries were performed for 35 hips during the subsequent follow-up period due to progression of the disease process.Conclusions: Based on the analysis of our surgical experiences by the retrospective chart review, we have established a flowchart of the treatment strategy for chronic hip arthropathy in long-term hemodialysis patients.Study Design: This study is retrospective clinical study. [ABSTRACT FROM AUTHOR]

Background: Patients with chronic obstructive pulmonary disease (COPD) have difficulties inhaling as the diaphragm becomes flattened and weakened due to lung hyperinflation. This weakened respiratory function is compensated for by the increased activity of the accessory respiratory muscles, such as the sternocleidomastoid muscle (SCM). Objectives: This study aimed to evaluate the difference in the SCM thickening fraction (SCM TF) of each respiratory phase (end-expiration, resting inspiration, and end-inspiration), as measured using ultrasonography (US), between patients with COPD and control subjects. We also evaluate the correlation between the SCM TF of each respiratory phase and exercise tolerance in patients with COPD. Methods: Patients with COPD (n = 44) and age-matched controls (n = 20) underwent US for determination of the SCM TF. Ventilation parameters, including the peak oxygen uptake (peak VO2) and the change in the inspiratory capacity, were measured during cardiopulmonary exercise testing. The SCM thickness and TF was measured during end-expiration, resting breathing, and end-inspiration. Results: The SCM was significantly thinner in patients with COPD than in controls at end-expiration. The increase in the SCM TF from end-expiration to end-inspiration in patients with COPD did not differ significantly from that in control subjects. In contrast, the SCM TF from end-expiration to resting inspiration was significantly greater in patients with COPD than in control subjects. The peak VO2 was strongly positively correlated with the SCM TF from end-expiration to end-inspiration in patients with COPD (r = 0.71, p < 0.01). Conclusions: The SCM may be thinner in patients with COPD than in controls. The SCM TF may also be associated with exercise tolerance. [ABSTRACT FROM AUTHOR]

Background: In patients with chronic obstructive pulmonary disease (COPD), the maximum level of diaphragm excursion (DEmax) is correlated with dynamic lung hyperinflation and exercise tolerance. This study aimed to elucidate the utility of DEmax to predict the improvement in exercise tolerance after pulmonary rehabilitation (PR) in patients with COPD.Methods: This was a prospective cohort study. Of the 62 patients with stable COPD who participated in the outpatient PR programme from April 2018 to February 2021, 50 completed the programme. Six-minute walk distance (6MWD) was performed to evaluate exercise tolerance, and ultrasonography was performed to measure DEmax. Responders to PR in exercise capacity were defined as patients who demonstrated an increase of > 30 m in 6MWD. The receiver operating characteristic (ROC) curve was used to determine the cut-off point of DEmax to predict responses to PR.Results: Baseline levels of forced expiratory volume in 1 s, 6MWD, maximum inspiratory pressure, DEmax and quadriceps muscle strength were significantly higher, and peak dyspnoea of modified Borg (mBorg) scale score was lower in responders (n = 30) than in non-responders (n = 20) to PR (p < 0.01). In multivariate analysis, DEmax was significantly correlated with an increase of > 30 m in 6MWD. The area under the ROC curve of DEmax to predict responders was 0.915, with a sensitivity and specificity of 83% and 95%, respectively, at a cut-off value of 44.9 mm of DEmax.Conclusion: DEmax could adequately predict the improvement in exercise tolerance after PR in patients with COPD. [ABSTRACT FROM AUTHOR]

Purpose: Combined anteversion (CA) technique (stem-first procedure) has become generally accepted as an ideal means to achieve optimal CA value in THA. However, we hypothesized that CA technique for patients with various native femoral anteversions could pose a risk of anterior or posterior cup protrusion. In the present study, we examined whether it is possible to use the taper wedge stem to change the stem version to achieve optimal CA while avoiding cup protrusions with the cup-first procedure through minimally invasive (MIS) antero-lateral approach. Methods: Eighty-one patients underwent cup-first THA with a taper wedge stem. The acetabular cup was placed following the preoperative planning of the cup alignment to avoid anterior cup protrusions using CT-based navigation. Following the CA theory, anteversion of the taper wedge stem was changed to the target anteversion from the patient's native femoral anteversion. The native femoral anteversion, the change in version angle of the stem, postoperative CA and the length of anterior cup protrusions were evaluated in postoperative CT measurements. Results: The native femoral anteversion averaged 25.7° ± 8.9° (range 8°–45°). Cases with increased and decreased stem anteversion were observed in 42 hips (51.8%) and 33 hips (40.7%), respectively. The amount of increased and decreased version angles averaged 7.7° ± 4.8° (range 2°–21°) and 7.8° ± 5.1° (range 2°–20°), respectively. Postoperative CA values averaged 36.7° ± 3.4° (range 29.4°–44.2°) and anterior cup protrusion length averaged 2.0 mm ± 2.6 mm (0 ~ 8.8 mm) in axial view and 0.4 mm ± 1.0 mm (0 ~ 3.6 mm) in sagittal view. Anterior cup protrusion of more than 10 mm was not observed in any hips. Conclusion: This procedure can be considered as an option to achieve optimal CA anteversion while avoiding anterior cup protrusion in THA. [ABSTRACT FROM AUTHOR]

Knee arthroscopy is a complex minimally invasive surgery that can cause unintended injuries to femoral cartilage or postoperative complications, or both. Autonomous robotic systems using real-time volumetric ultrasound (US) imaging guidance hold potential for reducing significantly these issues and for improving patient outcomes. To enable the robotic system to navigate autonomously in the knee joint, the imaging system should provide the robot with a real-time comprehensive map of the surgical site. To this end, the first step is automatic image quality assessment, to ensure that the boundaries of the relevant knee structures are defined well enough to be detected, outlined, and then tracked. In this article, a recently developed one-class classifier deep learning algorithm was used to discriminate among the US images acquired in a simulated surgical scenario on which the femoral cartilage either could or could not be outlined. A total of 38 656 2-D US images were extracted from 151 3-D US volumes, collected from six volunteers, and were labeled as “1” or as “0” when an expert was or was not able to outline the cartilage on the image, respectively. The algorithm was evaluated using the expert labels as ground truth with a fivefold cross validation, where each fold was trained and tested on average with 15 640 and 6246 labeled images, respectively. The algorithm reached a mean accuracy of 78.4% ± 5.0, mean specificity of 72.5% ± 9.4, mean sensitivity of 82.8% ± 5.8, and mean area under the curve of 85% ± 4.4. In addition, interobserver and intraobserver tests involving two experts were performed on an image subset of 1536 2-D US images. Percent agreement values of 0.89 and 0.93 were achieved between two experts (i.e., interobserver) and by each expert (i.e., intraobserver), respectively. These results show the feasibility of the first essential step in the development of automatic US image acquisition and interpretation systems for autonomous robotic knee arthroscopy. [ABSTRACT FROM AUTHOR]

Purpose: Combined anteversion (CA) technique (stem-first procedure) is generally accepted as the optimal technique to attain an appropriate CA value in total hip arthroplasty (THA). However, cup anteversion is strongly influenced by the native femoral anteversion. Accordingly, anterior protrusion of the cup in the acetabulum might occur. The purpose of the present study is to investigate the achievement of the optimal CA while avoiding anterior cup protrusion and examine the significance of our new CA technique with cup-first procedure in hybrid THA. Methods: Seventy-nine hybrid THAs with the cup-first procedure used a CT-based navigation system for cup positioning. In the preoperative planning, cup anteversion was aimed at approximately 20°. However, in actuality, sufficient cup coverage in the original acetabulum based on individual anatomy is given priority over cup placement based on CT-based planning to ensure adequate cup coverage. The target stem anteversion was determined following Widmer's mathematical formula (37.3 = femoral stem anteversion × 0.7 + cup anteversion). Cemented stem was inserted according to the target stem anteversion angle. Results: Regarding the assessment of overall alignment, the calculated Widmer's CA values during surgery and postoperative CT evaluation were 34.1° ± 6.0° (range 20.7°–51.2°) and 35.1° ± 6.7° (range 21.6°–50.7°). There were 72 hips (91.1%) within 25°–50° of CA. Cup protrusion length averaged 2.0 mm ± 2.6 mm (0–8.8 mm) in the axial view and 0.4 mm ± 1.0 mm (0–3.6 mm) in the sagittal view. Cup protrusion length of more than 5 mm was indicated in 10 hips, and no hips observed more than 10 mm. Conclusion: Our new CA technique (cup-first procedure) with hybrid THA was able to achieve optimal CA value while avoiding anterior cup protrusion. [ABSTRACT FROM AUTHOR]

A 64-year-old woman with a spontaneous fused hip sustained a left femoral neck fracture. It was revealed that her left hip joint had a long-standing spontaneous hip fusion due to end-stage osteoarthritis. Additionally, she sustained an ipsilateral femoral intertrochanteric fracture and underwent osteosynthesis using a dynamic hip screw 8 years ago. The one-stage THA was successfully treated with no major complications and good functional recovery was obtained. The hip range of motion improved remarkably at one year after surgery. The Modified Harris Hip Score improved from an estimated 70 points before fracture to 95 points at final follow-up. [ABSTRACT FROM AUTHOR]

Objective: To evaluate the impact of spinopelvic parameters and hip contracture on change in the pelvic tilt (PT) after Total hip arthroplasty (THA). Methods: One hundred patients (15 male and 85 female) who underwent THA were included in this prospective study. Radiographic data were obtained preoperatively and 1 year after THA. Radiographic parameters included sagittal anterior pelvic plane (APP), sagittal vertical axis (SVA), sacral slope (SS), pelvic inclination (PI), and lumbar lordosis angle (LL). The APP was defined as the angle between the anterior pelvic plane and the vertical plane. A positive value indicates pelvic retroversion. Postoperative changes in PT were divided into three groups: the PA group (pelvic anteversion, ΔAPP < −5°), the PR group (pelvic retroversion, ΔAPP > 5°), and the PT group (minimal change, ΔAPP ≤ ± 5°). The Kruskal–Wallis test and the Steel–Dwass test were used to compare the preoperative and postoperative spinopelvic parameters among the three groups. The Spearman's rank correlation coefficient was used to evaluate the correlation between ΔAPP and spinopelvic parameters. Results: Minimal change in pelvic tilt was observed in 59% of patients, while pelvic anteversion was observed in 16% of patients and pelvic retroversion was observed in 25% of patients. There were no significant changes in the spinopelvic parameters, including TK, LL, SVA, LL, SS, and APP after THA. The Femoral angle (FA) was significantly decreased after THA (P < 0.001). Preoperative APP was significantly more retroverted in the PA group than the PR group, and the PT group (6.8 ± 12.2, 0.2 ± 9.9, −8.3 ± 8.3, P < 0.001). Preoperative SS, PI‐LL, and PI were significantly smaller in the PA group than the PT group and the PR group. A significant negative correlation was identified between preoperative APP and ΔAPP (r = −0.418, P < 0.001). Conclusion: Approximately 60% of the patients did not have any marked change in PT after THA. Preoperative APP was the only predictive factor associated with marked anterior or posterior change in PT. [ABSTRACT FROM AUTHOR]

Purpose: In total hip arthroplasty (THA), combined anteversion (CA) is used as a parameter for assessment of overall prosthetic alignment. The purpose of this study was to comparatively examine the CA value in patients who underwent primary THA using the image-free navigation system either with a cup-first or stem-first technique.Methods: Eighty-three hips undergoing primary THA using the OrthoPilot® image-free navigation system (B. Braun-Aesculap, Tuttlingen, Germany) were included in this study. The patient population was divided into two groups depending on the procedure used: cup-first technique and stem-first technique. In the cup-first group, inclination and anteversion (AV) angles were targeted at 35-45° and 15-25°, respectively, while stem antetorsion (AT) was determined for each patient based on the amount of individual native femoral AT angle. In the stem-first group, the femur was prepared first with the target angle corresponding to the native femoral AT and the cup AV was decided considering the CA calculated with Widmer's formula (aiming at the optimal Widmer's CA of 37.3°).Results: Better consistency in Widmer's CA values was attained in the stem-first group as indicated by the smaller SD values. In the assessment of overall alignment, Widmer's CA values were within the satisfactory range (37 ± 5°) in 41.9 and 92.3 % of the subjects in the cup-first group and the stem-first group, respectively.Conclusions: The stem-first technique with image-free navigated THA could effectively achieve accurate and consistent control of the CA value and thus is expected to improve the surgical outcome. [ABSTRACT FROM AUTHOR]

Purpose: This study aimed to assess the relationship between pancreatic fibrosis measured by the extracellular volume fraction (ECV) using contrast-enhanced computed tomography (CT) and the histologic pancreatic fibrosis fraction and investigate the relationship between pancreatic fibrosis and pancreatic cancer.Method: The study included 88 consecutive patients (48 males, 40 females; median age, 69 years; range, 17-89 years); 47 had pancreatic cancer, and 41 had other diseases. Fifty-two cases were evaluated pathologically for pancreatic fibrosis. The histologic pancreatic fibrosis fraction was quantified using image analysis software in nontumorous pancreatic tissue at the resection stump using 2-µm-thick Azan-stained slides. Two board-certified radiologists measured ECV in the pancreatic parenchyma at an estimated transection line. The correlation between histologic pancreatic fibrosis fraction and ECV was investigated, and whether the ECV value could be used as a biomarker for pancreatic cancer was investigated.Results: The histologic pancreatic fibrosis fraction was significantly correlated with the ECV (r = 0.64, P < 0.01). Pancreatic fibrosis evaluated by ECV was higher in pancreatic cancer patients than in other patients (P < 0.01). On receiver-operating characteristic curve analysis, the ECV had good diagnostic accuracy for the development of pancreatic cancer (cut-off value 32.8%; sensitivity 61.0%, specificity 85.1%). ECV was identified on multivariate analysis as an independent risk factor for pancreatic cancer (odds ratio 1.16; P < 0.01).Conclusions: Extracellular volume fraction was strongly related to the histologic pancreatic fibrosis fraction, which was independently associated with pancreatic cancer. Thus, extracellular volume fraction is an imaging biomarker that reflects the progression of pancreatic fibrosis and may potentially help predict the development of pancreatic cancer, although further investigation will be needed. [ABSTRACT FROM AUTHOR]

Background: Major vascular injury is one of the most devastating complications in total hip arthroplasty (THA). Risk for intraoperative vascular injury is increased when the normal vascular anatomy is distorted by previous surgery or dislocation with displacement. Therefore, an appreciation of the vascular anatomy in relation to the anticipated surgical field is critical to avoid this complication during preoperative assessment for a complicated THA. Methods: Preoperative three-dimensional (3D) CT angiography was performed for 24 complicated THAs when altered vascular anatomy around the acetabulum was suspected. When assessing the CT images, the presence of apparent proliferation of vessels close to the original acetabulum as well as a distance of <10 mm from the artery to the acetabulum was deemed a potential risk factor for intraoperative vascular injury. Additionally, the relationships of clinical characteristics and the presence of these risk factors were analyzed to identify the patient population at risk. Results: The incidence of proliferation of collateral vessels was higher in patient groups with proximal femoral migration of 5 cm or more and multiple previous surgeries prior to the index THA. Moreover, in three ankylosed hips, lateral deviation of the main vascular trunk with an artery-acetabulum distance of <10 mm was identified in all cases. Conclusion: Preoperative 3D-CT angiography in cases of complicated THA revealed altered vascular anatomy which may increase the risk for intraoperative vascular injuries. Patient characteristics related to the risk for this complication were marked proximal femoral migration, multiple previous surgeries, and hip ankylosis. Preoperative image examination of the vascular anatomy is thought to help reduce the risk of inadvertent vascular injury in these complicated THA cases. [ABSTRACT FROM AUTHOR]

• The femoral condyle cartilage is one of the structure most at risk during knee arthroscopy. • The first methodology to track in real-time the femoral condyle cartilage in ultrasound images. • Effective combination of a neural network architecture for medical image segmentation and the siamese framework for visual tracking. • Tracking performance comparable to two experienced surgeons. • Outperforming state-of-the-art segmentation models and trackers in the tracking of the femoral cartilage. The tracking of the knee femoral condyle cartilage during ultrasound-guided minimally invasive procedures is important to avoid damaging this structure during such interventions. In this study, we propose a new deep learning method to track, accurately and efficiently, the femoral condyle cartilage in ultrasound sequences, which were acquired under several clinical conditions, mimicking realistic surgical setups. Our solution, that we name Siam-U-Net, requires minimal user initialization and combines a deep learning segmentation method with a siamese framework for tracking the cartilage in temporal and spatio-temporal sequences of 2D ultrasound images. Through extensive performance validation given by the Dice Similarity Coefficient, we demonstrate that our algorithm is able to track the femoral condyle cartilage with an accuracy which is comparable to experienced surgeons. It is additionally shown that the proposed method outperforms state-of-the-art segmentation models and trackers in the localization of the cartilage. We claim that the proposed solution has the potential for ultrasound guidance in minimally invasive knee procedures. [ABSTRACT FROM AUTHOR]