Search

The cost benefits of herd genotyping and the benefits of using sexed semen have been affected by recent improvements in sexing technologies, incorporation of direct health traits in the German total merit index for Holstein cattle, deteriorating prices for purebred heifer calves and bull calves, and introduction of herd genotyping programs. Inseminating genetically superior dams with female-sexed Holstein semen increases the mean breeding value of heifer calves and can produce more Holstein heifer calves than are needed for replacement. This provides an opportunity to increase the selection response in health and production traits at the farm level. A deterministic model is introduced that predicts the increase or decrease in net profit when a farmer takes part in a herd genotyping program and follows a certain insemination strategy. The types of semen allocated to cows and heifers may be sexed or unsexed and Holstein or beef breed. Genetically superior heifers and cows are inseminated with female-sexed Holstein semen, intermediate dams with unsexed Holstein semen, and genetically inferior dams with unsexed or male-sexed beef breed semen. In general, participating in a herd genotyping program is beneficial for German Holstein breeders. The optimum proportions of cows and heifers that should be inseminated with a certain type of semen are sensitive to farm-specific peculiarities. A small price difference between crossbred bull calves and crossbred heifer calves often makes the use of male-sexed beef breed semen uneconomic. Under the conditions considered, it was found to be advantageous to inseminate approximately 50% of heifers and 10% of cows with the highest genetic merit with female-sexed Holstein semen. The optimum proportion of cows that should be inseminated with unsexed beef breed semen was found to be approximately 40%. In a herd with a low replacement rate, the selected heifers can exhibit their genetic superiority over a longer period of time, and a larger proportion of cows can be inseminated with beef breed semen. Participation in a herd genotyping program is, therefore, particularly beneficial for herds with low replacement rates. [ABSTRACT FROM AUTHOR]

It is well known that mammals and avian gut microbiota compositions are shaped by the host genomes and affect quantitative traits. The microbial architecture describes the impact of the microbiota composition on quantitative trait variation and the number and effect distribution of microbiota features. In the present study the gut microbial architecture of feed-related traits phosphorus and calcium utilization, daily gain, feed intake and feed per gain ratio in the domestic poultry model species Japanese quail were assessed by mixed linear models. The ileum microbiota composition was characterized by 16S rRNA amplicon sequencing techniques of growing individuals. The microbiability of the traits was on a similar level as the narrow sense heritability and was highly significant except for calcium utilization. The animal microbial correlation of the traits was substantial. Microbiome-wide association analyses revealed several traits associated and highly significant microbiota features, both on the bacteria genera as well as on the operational taxonomic unit level. Most features were significant for more than one trait, which explained the high microbial correlations. It can be concluded that the traits are polymicrobial determined with some microbiota features with larger effects and many with small effects. The results are important for the development of hologenomic selection schemes for feed-related traits in avian breeding programs that are targeting the host genome and the metagenome simultaneously. [ABSTRACT FROM AUTHOR]

Most traits in animal breeding, including feed efficiency traits in pigs, are affected by many genes with small effect and have a moderately high heritability between 0.1 and 0.5, which enables efficient selection. Since the microbiota composition in the gastrointestinal tract is also partly heritable and was shown to have a substantial effect on feed efficiency, the host genes affect the phenotype not only directly by altering metabolic pathways, but also indirectly by changing the microbiota composition. The effect mi of the microbiota composition on the breeding value gi of an animal i is the conditional expectation of its breeding value, given the vector φi with microbiota frequencies, that is mi=Egi|φi. The breeding value gi of an animal can therefore be decomposed into a heritable contribution mi that arises from an altered microbiota composition and a heritable contribution pi that arises from altered metabolic pathways within the animal, so gi=mi+pi. Instead of selecting for breeding value g^i, an index comprising the two components m^i and p^i with appropriate weights, that is Ii=λ1m^i+λ2p^i, can be used. The present study shows how this breeding strategy can be applied in pig genomic selection breeding scheme for two feed efficiency traits and daily gain. [ABSTRACT FROM AUTHOR]

Background: Selecting animals for breeding in the optimum way plays an essential role for the management of genetic resources and in selective breeding of livestock species. It requires to compute the optimum genetic contribution of each selection candidate to the next generation. Current software packages for optimum contribution selection (OCS) are not able to handle the main conflicting objectives of animal breeding programs simultaneously, which includes to increase genetic gain, to increase or to maintain genetic diversity, to recover the original genetic background of endangered breeds with historic introgression, and to maintain or increase genetic diversity at native alleles. Results: The free R package optiSel offers functions for estimating the above mentioned parameters from pedigree and marker data, and for solving OCS problems. One parameter can be optimized, whereas the remaining ones can be constrained. The results reveal the optimum numbers of offspring of all selection candidates, and can subsequently be used for mate allocation. Different solvers can be used. Solver slsqp was superior when the genetic diversity at native alleles was to be maximized, whereas solvers cccp and cccp2 were superior for all other OCS problems. Conclusion: Optimum contribution selection applied to local breeds requires special attention due to the conflicting objectives of their breeding programs. The free R package optiSel is an easy-to-use software taking these conflicting objectives into account. [ABSTRACT FROM AUTHOR]

Many local dairy cattle breeds are facing genetic extinction due to a large proportion of foreign genes, which have been introgressed in the past. In addition, the performance gap to popular high‐yielding breeds is increasing, resulting in a risk of numeric extinction. In the present simulation study, a genomic rotational crossbreeding scheme with the high‐yielding German Holstein breed and the numerically small German Angler breed was analysed with the aim to utilize heterosis effects in the crossbred animals. Simultaneously inbreeding was controlled, and the amount of Holstein introgression observed in the Angler breed was reduced. Different scenarios of implementing OCS methods for Angler individuals were evaluated, which differed in their restrictions regarding kinship, native kinship, as well as the amount of genetic contributions from German Holstein. The results showed that rotational crossbreeding can result in superior crossbred offspring compared to the purebred parental lines, whereby OCS methods can simultaneously restrict the increase in inbreeding and keep the Holstein contributions at their current level. However, reducing the amount of migrant contributions while restricting the increase in the native kinship in Angler turned out to be a costly restriction. The reason was that Angler with low genetic contributions from Holsteins tended to have similar Angler ancestors. Consequently, reducing Holstein contributions would considerably increase the native kinship in Angler if it were not constrained. The constraint on the native kinship made a constraint on the conventional kinship superfluous and caused it to increase at a much lower rate than envisaged. This led to both, a high genetic diversity and a low genetic gain. The high genetic diversity in Angler also resulted in lower and oscillating heterosis effects in the crossbred animals. Thus, the reduction of migrant contribution did not increase heterosis effects in the crossbred offspring, and did not result in superior crossbred offspring in general. [ABSTRACT FROM AUTHOR]

Genomic selection refers to the use of dense, genome-wide markers for the prediction of breeding values (BV) and subsequent selection of breeding individuals. It has become a standard tool in livestock and plant breeding for accelerating genetic gain. The core of genomic selection is the prediction of a large number of marker effects from a limited number of observations. Various Bayesian methods that successfully cope with this challenge are known. Until now, the main research emphasis has been on additive genetic effects. Dominance coefficients of quantitative trait loci (QTLs), however, can also be large, even if dominance variance and inbreeding depression are relatively small. Considering dominance might contribute to the accuracy of genomic selection and serve as a guide for choosing mating pairs with good combining abilities. A general hierarchical Bayesian model for genomic selection that can realistically account for dominance is introduced. Several submodels are proposed and compared with respect to their ability to predict genomic BV, dominance deviations and genotypic values (GV) by stochastic simulation. These submodels differ in the way the dependency between additive and dominance effects is modelled. Depending on the marker panel, the inclusion of dominance effects increased the accuracy of GV by about 17% and the accuracy of genomic BV by 2% in the offspring. Furthermore, it slowed down the decrease of the accuracies in subsequent generations. It was possible to obtain accurate estimates of GV, which enables mate selection programmes. [ABSTRACT FROM PUBLISHER]

Knowledge of the genetic architecture of a quantitative trait is useful to adjust methods for the prediction of genomic breeding values and to discover the extent to which common assumptions in quantitative trait locus (QTL) mapping experiments and breeding value estimation are violated. It also affects our ability to predict the long-term response of selection. In this paper, we focus on additive and dominance effects of QTL. We derive formulae that can be used to estimate the number of QTLs that affect a quantitative trait and parameters of the distribution of their additive and dominance effects from variance components, inbreeding depression and results from QTL mapping experiments. It is shown that a lower bound for the number of QTLs depends on the ratio of squared inbreeding depression to dominance variance. That is, high inbreeding depression must be due to a sufficient number of QTLs because otherwise the dominance variance would exceed the true value. Moreover, the second moment of the dominance coefficient depends only on the ratio of dominance variance to additive variance and on the dependency between additive effects and dominance coefficients. This has implications on the relative frequency of overdominant alleles. It is also demonstrated how the expected number of large QTLs determines the shape of the distribution of additive effects. The formulae are applied to milk yield and productive life in Holstein cattle. Possible sources for a potential bias of the results are discussed. [ABSTRACT FROM AUTHOR]

Abstract: Global depth, tangent depth and simplicial depths for classical and orthogonal regression are compared in examples, and properties that are useful for calculations are derived. The robustness of the maximum simplicial depth estimates is shown in examples. Algorithms for the calculation of depths for orthogonal regression are proposed, and tests for multiple regression are transferred to orthogonal regression. These tests are distribution free in the case of bivariate observations. For a particular test problem, the powers of tests that are based on simplicial depth and tangent depth are compared by simulations. [ABSTRACT FROM AUTHOR]

Abstract: A general approach for developing distribution free tests for general linear models based on simplicial depth is applied to multiple regression. The tests are based on the asymptotic distribution of the simplicial regression depth, which depends only on the distribution law of the vector product of regressor variables. Based on this formula, the spectral decomposition and thus the asymptotic distribution is derived for multiple regression through the origin and multiple regression with Cauchy distributed explanatory variables. The errors may be heteroscedastic and the concrete form of the error distribution does not need to be known. Moreover, the asymptotic distribution for multiple regression with intercept does not depend on the location and scale of the explanatory variables. A simulation study suggests that the tests can be applied also to normal distributed explanatory variables. An application on multiple regression for shape analysis of fishes demonstrates the applicability of the new tests and in particular their outlier robustness. [Copyright &y& Elsevier]

Abstract: A general approach for developing distribution-free tests for general linear models based on simplicial depth is presented. In most relevant cases, the test statistic is a degenerated U-statistic so that the spectral decomposition of the conditional expectation of the kernel function is needed to derive the asymptotic distribution. A general formula for this conditional expectation is derived. Then it is shown how this general formula can be specified for polynomial regression. Based on the specified form, the spectral decomposition and thus the asymptotic distribution is derived for polynomial regression of arbitrary degree. The power of the new test is compared via simulation with other tests. An application on cubic regression demonstrates the applicability of the new tests and in particular their outlier robustness. [Copyright &y& Elsevier]

Simple Summary: Feather pecking is a behavior frequently occurring in commercial layer flocks. It often leads to skin injuries and cannibalism. Besides economic losses, severe animal welfare problems cannot be ignored. Previous research has shown that the trait is heritable. Thus breeding against feather pecking is possible, but phenotyping in a commercial environment is economically unfeasible at the moment because of the lack of proper techniques. Therefore, understanding the genetic background of the trait is mandatory to establish a genomic breeding program. This would require genotypic information of the hens, which is feasible under practical conditions. In the present study, we used different methods to identify regions in the genome that influence feather pecking and extreme feather pecking. We found one trait associated with the genomic region. The use of genotypic information from this region in terms of selection against the undesired behavior may help to improve animal welfare in layer flocks. Feather pecking (FP) is a longstanding serious problem in commercial flocks of laying hens. It is a highly polygenic trait and the genetic background is still not completely understood. In order to find genomic regions influencing FP, selection signatures between laying hen lines divergently selected for high and low feather pecking were mapped using the intra-population iHS and the inter-population FST approach. In addition, the existence of an extreme subgroup of FP hens (EFP) across both selected lines has been demonstrated by fitting a mixture of negative binomial distributions to the data and calculating the posterior probability of belonging to the extreme subgroup (pEFP) for each hen. A genomewide association study (GWAS) was performed for the traits pEFP and FP delivered (FPD) with a subsequent post GWAS analysis. Mapping of selection signatures revealed no clear regions under selection. GWAS revealed a region on Chromosome 1, where the existence of a QTL influencing FP is likely. The candidate genes found in this region are a part of the GABAergic system, which has already been linked to FP in previous studies. Despite the polygenic nature of FP, selection on these candidate genes may reduce FP. [ABSTRACT FROM AUTHOR]

Background: During the last two decades, many QTL (quantitative trait locus) mapping experiments in pigs have been conducted using F2 crosses established from two outbred founder breeds. The founder breeds were frequently chosen from the Asian and European type breeds. A combination of next-generation sequencing, SNP (single nucleotide polymorphism) genotyping technology using SNP-chips, and genotype imputation techniques, can be used to infer the sequence information of all F2 individuals in a cost-effective way. The aim of the present simulation study was to analyze the power and precision of genome-wide association studies (GWASs) with whole-genome sequence data in several types of F2 crosses, including pooled crosses. Methods: Based on a common historical population, three breeds representing two European type breeds (EU1 and EU2) and one Asian type breed (AS) were simulated. Two F2 designs of 500 individuals each were simulated. The cross EU1xEU2 (ASxEU2) was simulated using the phylogenetically closely related breeds EU1 and EU2 (or distantly related breeds AS and EU2) as the founder breeds. The simulated genomes comprised ten chromosomes, each with a length of 1 Morgan and whole-genome sequence information. A polygenic trait with a heritability of 0.5, which was affected by approximately 20 QTL per Morgan, was simulated. GWASs were conducted using single marker mixed linear models, either within the crosses or in their pooled datasets. Additionally, the studies were conducted in the breed EU2, which was a founder breed in both simulated crosses. Results: The power to map QTL was high (low) in the ASxEU2 (EU1xEU2) cross and was highest when the data of both crosses were analyzed jointly. By contrast, the mapping precision was the highest in the EU1xEU2 cross. Pooling data led to a precision that was in between the precision of the EU1xEU2 cross and the ASxEU2 cross. A higher mapping precision was observed for QTL segregating within a founder breed. Conclusions: These results suggest that the existing F2 crosses are promising databases for QTL mapping when the founder breeds are closely related or several crosses can be pooled. This conclusion is particularly applicable for QTL that segregate in a founder breed. [ABSTRACT FROM AUTHOR]

Recovering the native genetic background of a breed and increasing the founder genome equivalent (FGE) that is contributed by a breed to the gene pool of the species can increase its value for conservation. The suitability of several strategies was compared, whereby a hypothetical multi‐breed population, the core set, was used to approximate the genetic diversity of the species. Twenty‐five generations of management were simulated based on genotypes of German Angler cattle. The scenarios were compared when the kinship reached 0.10. The native contribution (NC) increased in a population with 400 births per generation from 0.317 to 0.706, whereas 1,000 births enabled to reach 0.894. This scenario maximized the NC, constrained the native kinship, and the kinship of the core set so that its genetic diversity could not decrease. It increased the proportions of mainstream breeds because their genes were removed from the target breed. A substantial increase of the FGE was achieved in some other scenarios, which arose from reduced genetic overlap and from increased diversity within the breed. The latter factor is especially important for breeds with high contributions to the core set. [ABSTRACT FROM AUTHOR]

Genomic analyses commonly explore the additive genetic variance of traits. The non‐additive variance, however, is usually small but often significant in dairy cattle. This study aimed at dissecting the genetic variance of eight health traits that recently entered the total merit index in Germany and the somatic cell score (SCS), as well as four milk production traits by analysing additive and dominance variance components. The heritabilities were low for all health traits (between 0.033 for mastitis and 0.099 for SCS), and moderate for the milk production traits (between 0.261 for milk energy yield and 0.351 for milk yield). For all traits, the contribution of dominance variance to the phenotypic variance was low, varying between 0.018 for ovarian cysts and 0.078 for milk yield. Inbreeding depression, inferred from the SNP‐based observed homozygosity, was significant only for the milk production traits. The contribution of dominance variance to the genetic variance was larger for the health traits, ranging from 0.233 for ovarian cysts to 0.551 for mastitis, encouraging further studies that aim at discovering QTLs based on their additive and dominance effects. [ABSTRACT FROM AUTHOR]

In this study, genetic parameters of nine growth, carcass, and meat quality (MQ) traits were estimated, and targeted association studies were conducted using mixed models. Phenotypic information was collected on 1,599 lambs, including both purebred Merinoland (ML) animals and five different F1 crosses. The F1 lambs were produced by mating rams of the meat-type breeds Charollais, Ile de France, German Blackheaded Mutton (Deutsches Schwarzköpfiges Fleischschaf), Suffolk, and Texel with ML ewes. Between four and six sires were used per sire breed. In total, 29 sires and 298 purebred ML sheep were genotyped with the Illumina OvineSNP50 BeadChip. All F1 individuals were genotyped for 289 SNPs located on the chromosomes 1, 2, 3, 18, and 21. These SNPs were used to impute SNPs on five chromosomes of the Illumina Ovine chip in the F1 individuals. Several Bonferroni-corrected significant associations were identified for shoulder width. A number of additional significant associations were found for other traits. Genetic parameters were estimated and single-marker association analyses were performed with breed-specific effects. Moderate heritability estimates were found for average daily gain (0.23), kidney fat weight (0.19), carcass length (0.15), shoulder width (0.33), subcutaneous fat thickness (0.22), and cutlet area (0.36). While heritability for cooking loss was found to be low (0.07), shear force (0.17) and dressing percentage (0.20) showed moderate heritability, and thus might be candidate traits to be included in the selection index in the population. In general, low phenotypic and low or moderate genetic correlations were detected between the traits. [ABSTRACT FROM AUTHOR]

The aim of the present study was to analyze the interplay between gastrointestinal tract (GIT) microbiota, host genetics, and complex traits in pigs using extended quantitative-genetic methods. The study design consisted of 207 pigs that were housed and slaughtered under standardized conditions, and phenotyped for daily gain, feed intake, and feed conversion rate. The pigs were genotyped with a standard 60 K SNP chip. The GIT microbiota composition was analyzed by 16S rRNA gene amplicon sequencing technology. Eight from 49 investigated bacteria genera showed a significant narrow sense host heritability, ranging from 0.32 to 0.57. Microbial mixed linear models were applied to estimate the microbiota variance for each complex trait. The fraction of phenotypic variance explained by the microbial variance was 0.28, 0.21, and 0.16 for daily gain, feed conversion, and feed intake, respectively. The SNP data and the microbiota composition were used to predict the complex traits using genomic best linear unbiased prediction (G-BLUP) and microbial best linear unbiased prediction (M-BLUP) methods, respectively. The prediction accuracies of G-BLUP were 0.35, 0.23, and 0.20 for daily gain, feed conversion, and feed intake, respectively. The corresponding prediction accuracies of M-BLUP were 0.41, 0.33, and 0.33. Thus, in addition to SNP data, microbiota abundances are an informative source of complex trait predictions. Since the pig is a well-suited animal for modeling the human digestive tract, M-BLUP, in addition to G-BLUP, might be beneficial for predicting human predispositions to some diseases, and, consequently, for preventative and personalized medicine. [ABSTRACT FROM AUTHOR]

The long-term performance of different selection strategies was evaluated via simulation using the example of a local cattle breed, German Angler cattle. Different optimum contribution selection (OCS) approaches to maximize genetic gain were compared to a reference scenario without selection and truncation selection. The kinships and migrant contribution (MC) were estimated from genomic data. Truncation selection achieved the highest genetic gain but decreased diversity considerably at native alleles. It also caused the highest increase in MCs. Traditional OCS, which only constrains kinship, achieved almost the same genetic gain but also caused a small increase of MC and remarkably reduced the diversity of native alleles. When MC was required not to increase and the increase of kinship at native alleles was restricted, the MC levels and the diversity at native alleles were well managed, and the genetic gain was only slightly reduced. However, genetic progress was substantially lower in the scenario that aimed to recover the original genetic background. Truncation selection and traditional OCS selection both reduce the genetic originality of breeds with historical introgression. The inclusion of MC and kinship at native alleles as additional constraints in OCS showed great potential for conservation. Recovery of the original genetic background is possible but requires many generations of selection and reduces the genetic progress in performance traits. Hence, constraining MCs at their current values can be recommended to avoid further reduction of genetic originality. [ABSTRACT FROM AUTHOR]