Search

AbstractThe wet desulfurization yields slurry with a moderate temperature and stable supply and thus holds promise for waste heat utilization. However, the corrosive nature and solid particle content of desulfurization slurry from the wet desulfurization process pose potential erosion challenges in waste heat utilization heat exchangers, which is an aspect scarcely explored in the existing literature. The present study aimed to investigate the erosion characteristics in desulfurization slurry heat exchangers using numerical simulation approaches, which can offer crucial insights for practical application in low-grade energy recovery. The result identified slurry mass flow rate and composition as essential factors of erosion distribution. Higher mass flow rates enhance heat transfer efficiency. Still, paradoxically, lower flow rates lead to more pronounced erosion, with a slurry mass flow rate of 35 kg/s resulting in nearly double the erosion compared to the benchmark condition of 56 kg/s. This phenomenon is ascribed to lower fluid velocities in the heat tubes, where the influence of changed velocity diminishes, but slurry exhibits more stable flow at higher mass flow rates. Furthermore, it is also observed that both elevated solids content and particle size lead to an increase in erosion rates. The difference in erosion caused by solid particles with particle sizes in the range of 200–350 µm is marginal. The heat exchanger structure and arrangement also impact fluid flow and erosion. While the difference in fluid flow between vertically and horizontally arranged heat exchangers is negligible, the erosion was significantly reduced to 1/10 in the vertical arrangement. The no-tube-in-window heat exchangers, designed to minimize vibration, exhibit reduced heat transfer capacity alongside diminished and more uniform erosion. The augmentation of tube passes reduces overall erosion but focalizes severe erosion at the slurry inlet, which presents a potential design solution. [ABSTRACT FROM AUTHOR]

To decrease the time consumption and the labor intensity in the absolute datum transfer of traditional seafloor control network measurement, a new method, namely sailing-circle positioning method, is put forward in this paper. First, the traditional intersection positioning model is improved by considering the equivalent sound velocity profile error as an unknown parameter in the adjustment model. Second, the effect of geometric dilution of precision (GDOP) on positioning accuracy is analyzed. By seeking for the minimum of GDOP, it is concluded that the absolute datum transfer can achieve the highest accuracy in the condition of sailing along a circle relative to other sailing paths. Moreover, the optimal radius of the circle for the accurate datum transfer is also given out. Besides, the correlation between the accuracy of datum transfer and the sound velocity error in this method is analyzed. Finally, the new method was tested and verified by the experiments in Songhua lake with the water depth of 60 m and in South China sea with the water depth of 2000 m, respectively. These experiment results show that the new method can improve the accuracy and efficiency of traditional datum transfer method significantly. [ABSTRACT FROM AUTHOR]

The multi-beam echo sounder system can not only obtain high-precision seabed bathymetry data, but also obtain high-resolution seabed backscatter strength data. A number of studies have applied acoustic remote sensing method to classify seabed sediment type with multi-beam backscatter strength data, and obtained better classification results than the traditional sediment sampling method. However, these studies mainly focus on the single type sediment classification or seabed mixed sediment classification using single beam data, not multi-beam echo sounder data. Based on backscatter strength data by a high-frequency (300 kHz) Simrad EM3000 multi-beam echo sounder and seabed sediment sampling data of Jiaozhou Bay in Qingdao, China, we establish the relation model between seabed backscatter strength and sediment type characteristics after data processing and corrections. The purpose of data processing is to diminish or weaken the influence of local bottom slope and near nadir reflection on backscatter strength data. Processed backscatter strength data through corrections and compensations can better characterize the features of the seabed sediments. Applying the back propagation neural network method based on genetic algorithm, we present a fast and accurate seabed classification method in this paper which could identify not just a single type of sediment-like rock, sand but also mixed types of sediment like sand gravel, clayey silt and sand-silt-clay. [ABSTRACT FROM PUBLISHER]