Search

Abstract  A series of the mixed transition metal compounds, Li[(Ni1/3Co1/3Mn1/3)1–x-y Al x B y ]O2-z F z (x = 0, 0.02, y = 0, 0.02, z = 0, 0.02), were synthesized via coprecipitation followed by a high-temperature heat-treatment. XRD patterns revealed that this material has a typical α-NaFeO2 type layered structure with R3- m space group. Rietveld refinement explained that cation mixing within the Li(Ni1/3Co1/3Mn1/3)O2 could be absolutely diminished by Al-doping. Al, B and F doped compounds showed both improved physical and electrochemical properties, high tap-density, and delivered a reversible capacity of 190 mAh/g with excellent capacity retention even when the electrodes were cycled between 3.0 and 4.7 V. [ABSTRACT FROM AUTHOR]

Direct use of metals as battery anodes could significantly boost the energy density, but suffers from limited cycling. To make the batteries more sustainable, one strategy is mitigating the propensity for metals to form random morphology during plating through orientation regulation, e.g., hexagonal Zn platelets locked horizontally by epitaxial electrodeposition or vertically aligned through Zn/electrolyte interface modulation. Current strategies center around obtaining (002) faceted deposition due to its minimum surface energy. Here, benefiting from the capability of preparing a library of faceted monocrystalline Zn anodes and controlling the orientation of Zn platelet deposits, we challenge this conventional belief. We show that while monocrystalline (002) faceted Zn electrode with horizontal epitaxy indeed promises the highest critical current density, the (100) faceted electrode with vertically aligned deposits is the most important one in suppressing Zn metal corrosion and promising the best reversibility. Such uniqueness results from the lowest electrochemical surface area of (100) faceted electrode, which intrinsically builds upon the surface atom diffusion barrier and the orientation of the pallets. These new findings based on monocrystalline anodes advance the fundamental understanding of electrodeposition process for sustainable metal batteries and provide a paradigm to explore the processing-structure-property relationships of metal electrodes. [ABSTRACT FROM AUTHOR]

The article presents a study on the stabilization of garnet/Li interphase by diluting the electronic conductor which helps in solid-state Li batteries (SSLBs). It discusses the effect of interphase nature on interfacial resistance and Li dendrite suppression which provide guidelines for designing high-performance SSLBs.

Daniell cell (i.e. Zn-Cu battery) is widely used in chemistry curricula to illustrate how batteries work, although it has been supplanted in the late 19th century by more modern battery designs because of Cu2+-crossover-induced self-discharge and un-rechargeable characteristic. Herein, it is re-built by using a ceramic Li-ion exchange film to separate Cu and Zn electrodes for preventing Cu2+-crossover between two electrodes. The re-built Zn-Cu battery can be cycled for 150 times without capacity attenuation and self-discharge, and displays a theoretical energy density of 68.3 Wh kg-1. It is more important that both electrodes of the battery are renewable, reusable, low toxicity and environmentally friendly. Owing to these advantages mentioned above, the re-built Daniell cell can be considered as a promising and green stationary power source for large-scale energy storage. [ABSTRACT FROM AUTHOR]

Highly ordered mesoporous platinum@graphitic carbon (Pt@GC) composites with well-graphitized carbon frameworks and uniformly dispersed Pt nanoparticles embedded within the carbon pore walls have been rationally designed and synthesized. In this facile method, ordered mesoporous silica impregnated with a variable amount of Pt precursor is adopted as the hard template, followed by carbon deposition through a chemical vapor deposition (CVD) process with methane as a carbon precursor. During the CVD process, in situ reduction of Pt precursor, deposition of carbon, and graphitization can be integrated into a single step. The mesostructure, porosity and Pt content in the final mesoporous Pt@GC composites can be conveniently adjusted over a wide range by controlling the initial loading amount of Pt precursor and the CVD temperature and duration. The integration of high surface area, regular mesopores, graphitic nature of the carbon walls as well as highly dispersed and spatially embedded Pt nanoparticles in the mesoporous Pt@GC composites make them excellent as highly active, extremely stable, and methanol-tolerant electrocatalysts toward the oxygen reduction reaction (ORR). A systematic study by comparing the ORR performance among several carbon supported Pt electrocatalysts suggests the overwhelmingly better performance of the mesoporous Pt@GC composites. The structural, textural, and framework properties of the mesoporous Pt@GC composites are extensively studied and strongly related to their excellent ORR performance. These materials are highly promising for fuel cell applications and the synthesis method is quite applicable for constructing mesoporous graphitized carbon materials with various embedded nanophases. [ABSTRACT FROM AUTHOR]

Among various energy-storage devices, electrochemical capacitors (ECs) are prominent power provision but show relatively low energy density. One way to increase the energy density of ECs is to move from carbon-based electric double-layer capacitors to pseudocapacitors, which manifest much higher capacitance. However, compared with carbon materials, the pseudocapacitive electrodes suffer from high resistance for electron and/or ion transfer, significantly restricting their capacity, rate capability and cyclability. Rational design of electrode materials offers opportunities to optimize their electrochemical performance, leading to devices with high energy density while maintaining high power density.This paper reviews the different approaches of electrodes striving to advance the energy and power density of ECs. [ABSTRACT FROM AUTHOR]

Uniform oxide deposition on graphene to form a sandwich-like configuration is a well-known challenge mainly due to their large lattice mismatches and poor affinities. Herein, we report a general strategy to synthesize uniform mesoporous TiO2/graphene/mesoporous TiO2 sandwich-like nanosheets (denoted as G@mTiO2), which cannot be achieved by conventional one-pot synthetic methods. We show that by rational control of hydrolysis and condensation of Ti precursors in a slow way, GO sheets can be conformably coated by amorphous TiO2 shells, which then can be facilely transformed into the well-defined G@mTiO2 nanosheets by annealing. This amorphous-to-crystalline strategy conveniently allows bypassing strain fields that would inevitably arise if direct growth of mesoporous anatase shells on graphene. As distinct from the most common structures of graphene-based composites (mixed, wrapped, or anchored models), the resultant materials display a uniform sandwich-like configuration: few-layer graphene conformably encapsulated by mesoporous TiO2 shells. This new G@mTiO2 nanosheet exhibits ultrathin nature (~34 nm), small size and high crystalline nanocrystals (~6 nm), high surface areas (~252 m²/g) and uniform mesopores (~3.4 nm). We further show that the thickness of mesoporous TiO2 shells can be facilely adjusted as desired by controlling the ammonia content, and this facile strategy can be easily extended to design other oxide/graphene/oxide sandwich-like materials. More importantly, we showcase the benefits of the resultant G@mTiO2 nanosheets as anodes in lithium ion batteries: they deliver an extra high capacity, an excellent high-rate capability, and long cycle life. [ABSTRACT FROM AUTHOR]

The rational design and controllable synthesis of strongly coupled inorganic/graphene hybrids represents a long-standing challenge for developing advanced catalysts and energy-storage materials. Here, we report a simple sol-gel method toward creating ultradispersed TiO⩽sub>2⩽/sub> nanoparticles on graphene with an unprecedented degree of control based on the precise separation and manipulation of nanoparticles nucleated, grown, anchored, and crystallized and the reduction of graphene oxide (GO). The hybrid materials show ultradispersed anatase nanoparticles (∼5 nm), ultrathin thickness (⩽3 layers), and a high surface area of ∼229 m2 / g and exhibit a high specific capacity of ∼94 mA h g-1 at ∼59 C, which is twice as that of mechanically mixed composites (∼41 mA h g-1 ), demonstrating the potential of strongly synergistic coupling effects for advanced functional systems [ABSTRACT FROM AUTHOR]

We report for the first time the synthesis of free-standing mesoporous carbon films with highly ordered pore architecture by a simple coating-etching approach, which have an intact morphology with variable sizes as large as several square centimeters and a controllable thickness of 90 nm to ∼3 μm. The mesoporous carbon films were first synthesized by coating a resol precursors/Pluronic copolymer solution on a preoxidized silicon wafer and forming highly ordered polymeric mesostructures based on organic-organic self-assembly, followed by carbonizing at 600 °C and finally etching of the native oxide layer between the carbon film and the silicon substrate. The mesostructure of this free-standing carbon film is confirmed to be an ordered face-centered orthorhombic Fmmm structure, distorted from the (110) oriented body-centered cubic Im3¯m symmetry. The mesoporosity of the carbon films has been evaluated by nitrogen sorption, which shows a high specific BET surface area of 700 m2/g and large uniform mesopores of ∼4.3 nm. Both mesostructures and pore sizes can be tuned by changing the block copolymer templates or the ratio of resol to template. These free-standing mesoporous carbon films with cracking-free uniform morphology can be transferred or bent on different surfaces, especially with the aid of the soft polymer layer transfer technique, thus allowing for a variety of potential applications in electrochemistry and biomolecule separation. As a proof of concept, an electrochemical supercapacitor device directly made by the mesoporous carbon thin films shows a capacitance of 136 F/g at 0.5 A/g. Moreover, a nanofilter based on the carbon films has shown an excellent size-selective filtration of cytochrome c and bovine serum albumin. [ABSTRACT FROM AUTHOR]

A lithiated Al-carbon composite electrode with a uniform SEI film was prepared by an electrochemical method, and was then coupled with an O2 catalytic electrode to form a rechargeable Li-O2 (or air) battery with a LixAl-C anode. [ABSTRACT FROM AUTHOR]

A facile approach is demonstrated for the preparation of mesoporous carbon nanowires in nanotubes, mesoporous carbon nanotubes and mesoporous carbon nanothorn microspheres by combining surfactant-templating self-assembly of organic resols with different MnO2 hard templates, and they deliver excellent capacitive performance for supercapacitor applications. [ABSTRACT FROM AUTHOR]