Search

The stereo-winds method follows trackable atmospheric cloud features from multiple viewing perspectives over multiple times, generally involving multiple satellite platforms. Multi-temporal observations provide information about the wind velocity and the observed parallax between viewing perspectives provides information about the height. The stereo-winds method requires no prior assumptions about the thermal profile of the atmosphere to assign a wind height, since the height of the tracked feature is directly determined from the viewing geometry. The method is well developed for pairs of Geostationary (GEO) satellites and a GEO paired with a Low Earth Orbiting (LEO) satellite. However, neither GEO-GEO nor GEO-LEO configurations provide coverage of the poles. In this paper, we develop the stereo-winds method for multi-LEO configurations, to extend coverage from pole to pole. The most promising multi-LEO constellation studied consists of Terra/MODIS and Sentinel-3/SLSTR. Stereo-wind products are validated using clear-sky terrain measurements, spaceborne LiDAR, and reanalysis winds for winter and summer over both poles. Applications of multi-LEO polar stereo winds range from polar atmospheric circulation to nighttime cloud identification. Low cloud detection during polar nighttime is extremely challenging for satellite remote sensing. The stereo-winds method can improve polar cloud observations in otherwise challenging conditions. [ABSTRACT FROM AUTHOR]

Stereo tracking of clouds from multiple satellites permits the simultaneous retrieval of an atmospheric motion vector ("wind") and its height in the atmosphere. The direct measurement of height is a major advantage of stereo methods over observations made from a single satellite where the height must be inferred from infrared brightness temperatures. A pair of operational geostationary satellites over the Americas provides stereo coverage where their two fields of view intersect. Stereo coverage can be extended to nearly a full hemisphere with a third satellite. We demonstrate this configuration with the operational GOES-R constellation of GOES-16 (east) and GOES-17 (west) augmented by GOES-18 in its central test slot and use the 500-m resolution Advanced Baseline Imager Band 2. We examine the consistency of the pairwise products created from GOES-18 and -16 versus GOES-18 and -17 and create a fused triple-GOES product that spans nearly the full hemisphere seen from GOES-18. We also examine the retrieval of ground points observed under clear skies and compare their retrievals to zero speed and known terrain heights. The results are compatible with a wind accuracy about 0.1 m/s with height assignment uncertainty of 175 m. [ABSTRACT FROM AUTHOR]

Geostationary satellites, Kalpana-1 (74 ° E) and Meteosat-7 (57.7 ° E) have overlapping spatial coverage over the Indian region. In this study, the atmospheric motion vectors ( AMVs) derived from the above two satellites were compared separately with respect to in situ radiosonde ( RS) winds and short-range numerical weather prediction ( NWP) forecasts from the National Centre for Medium Range Weather Forecasting's ( NCMRWF) T574L64 Global modelling system in terms of statistical parameters vis., speed bias and root mean square vector difference ( RMSVD) during the 2011 monsoon. Kalpana-1 AMVs showed high RMSVD with respect to the in situ RS winds and short range NWP forecasts. However, the monsoon features, the low level jet ( LLJ) and the tropical easterly jet ( TEJ) were clearly depicted in the mean observed AMVs from both the satellites. The high error associated with Kalpana-1 winds compared to that of Meteosat-7 winds could be due to the difference in the spatial resolution of different channels and the algorithm used for deriving the winds. [ABSTRACT FROM AUTHOR]

Height assignment is an important problem for satellite measurements of atmospheric motion vectors (AMVs) that are interpreted as winds by forecast and assimilation systems. Stereo methods assign heights to AMVs from the parallax observed between observations from different vantage points in orbit while tracking cloud or moisture features. In this paper, we fully develop the stereo method to jointly retrieve wind vectors with their geometric heights from geostationary satellite pairs. Synchronization of observations between observing systems is not required. NASA and NOAA stereo-winds codes have implemented this method and we processed large datasets from GOES-16, -17, and Himawari-8. Our retrievals are validated against rawinsonde observations and demonstrate the potential to improve the forecast skill. Stereo winds also offer an important mitigation for the loop heat pipe anomaly on GOES-17 during times when warm focal plane temperatures cause infrared channels that are needed for operational height assignments to fail. We also examine several application areas, including deep convection in tropical cyclones, planetary boundary layer dynamics, and fire smoke plumes, where stereo methods provide insights into atmospheric processes. The stereo method is broadly applicable across the geostationary ring where systems offering similar image navigation and registration (INR) performance as GOES-R are deployed. [ABSTRACT FROM AUTHOR]

For more than 15 years, polar winds from the Moderate Resolution Imaging Spectroradiometer (MODIS) imagery have been generated by the National Oceanic and Atmospheric Administration (NOAA) and the Cooperative Institute for Meteorological Satellite Studies (CIMSS). These datasets are a NOAA National Environmental Satellite, Data, and Information Service (NESDIS) operational satellite product that is used at more than 10 major numerical weather prediction (NWP) centers worldwide. The MODIS polar winds product is composed of both infrared window (IR-W) and water vapor (WV) tracked features. The WV atmospheric motion vectors (AMV) yield a better spatial distribution than the IR-W since both cloud and clear-sky features can be tracked in the WV images. As the new generation polar satellite-era begins with the Suomi National Polar-orbiting Partnership (S-NPP), there is currently no WV channel on the Visible/Infrared Imager/Radiometer Suite (VIIRS), resulting in a data gap with only IR-W derived AMVs possible. This scenario presents itself as an opportunity to evaluate hyperspectral infrared moisture retrievals from consecutive overlapping satellite polar passes to extract atmospheric motion from clear-sky regions on constant (and known) pressure surfaces, i.e., estimating winds in retrieval space rather than radiance space. Perhaps most significantly, this method has the potential to provide vertical wind profiles, as opposed to the current MODIS-derived single-level AMVs. In this study, the winds technique is applied to Atmospheric Infrared Sounder (AIRS) moisture retrievals from NASA's Aqua satellite. The resulting winds are assimilated into the Goddard Earth Observing System Model, Version 5 (GEOS-5). The results are encouraging, as the AIRS retrieval polar AMVs have a similar quality as the MODIS AMVs and exhibit a positive impact in the hemispheric Day 4.5 to 6.5 forecasts for a one-month experiment in July 2012. [ABSTRACT FROM AUTHOR]

Atmospheric Motion Vectors (AMVs) calculated by six different institutions (Brazil Center for Weather Prediction and Climate Studies/CPTEC/INPE, European Organization for the Exploitation of Meteorological Satellites/EUMETSAT, Japan Meteorological Agency/JMA, Korea Meteorological Administration/KMA, Unites States National Oceanic and Atmospheric Administration/NOAA, and the Satellite Application Facility on Support to Nowcasting and Very short range forecasting/NWCSAF) with JMA's Himawari-8 satellite data and other common input data are here compared. The comparison is based on two different AMV input datasets, calculated with two different image triplets for 21 July 2016, and the use of a prescribed and a specific configuration. The main results of the study are summarized as follows: (1) the differences in the AMV datasets depend very much on the 'AMV height assignment' used and much less on the use of a prescribed or specific configuration; (2) the use of the 'Common Quality Indicator (CQI)' has a quantified skill in filtering collocated AMVs for an improved statistical agreement between centers; (3) Among the six AMV operational algorithms verified by this AMV Intercomparison, JMA AMV algorithm has the best overall performance considering all validation metrics, mainly due to its new height assignment method: 'Optimal estimation method considering the observed infrared radiances, the vertical profile of the Numerical Weather Prediction wind, and the estimated brightness temperature using a radiative transfer model'. [ABSTRACT FROM AUTHOR]

EUMETSAT, the European Organization for the Exploitation of Meteorological Satellites, is one of the key contributors to global atmospheric motion vector (AMV) production around the world. Its current contribution includes geostationary satellites at 0.0 and 41.5 degrees east, and several products extracted from the Metop low-orbit satellites. These last ones mainly cover high-latitude regions completing the observations from the geostationary ring. In the upcoming years, EUMETSAT will launch a new generation of geostationary and low-orbit satellites. The imager instruments Flexible Combined Imager (FCI) and METImage will take over the nominal AMV production at EUMETSAT around 2022 and 2024. The enhanced characteristics of these new-generation instruments are expected to increase AMV production and to improve the quality of the products. This paper presents an overview of the current EUMETSAT AMV operational production, together with a roadmap of the preparation activities for the new generation of satellites. The characteristics of the upcoming AMV products are described and compared to the current operational AMV products. This paper also presents a recent investigation into AMV extraction using the Sentinel-3 Sea and Land Surface Temperature Radiometer (SLSTR) instrument, as well as the retrieval of wind profiles from infrared sounders. [ABSTRACT FROM AUTHOR]

Atmospheric motion vectors (AMVs), derived by tracking patterns, represent the winds in a layer characteristic of the pattern. AMV height (or pressure), important for applications in atmospheric research and operational meteorology, is usually assigned using observed IR brightness temperatures with a modeled atmosphere and can be inaccurate. Stereoscopic tracking provides a direct geometric height measurement of the pattern that an AMV represents. We extend our previous work with multi-angle imaging spectro–radiometer (MISR) and GOES to moderate resolution imaging spectroradiometer (MODIS) and the GOES-R series advanced baseline imager (ABI). MISR is a unique satellite instrument for stereoscopy with nine angular views along track, but its images have a narrow (380 km) swath and no thermal IR channels. MODIS provides a much wider (2330 km) swath and eight thermal IR channels that pair well with all but two ABI channels, offering a rich set of potential applications. Given the similarities between MODIS and VIIRS, our methods should also yield similar performance with VIIRS. Our methods, as enabled by advanced sensors like MODIS and ABI, require high-accuracy geographic registration in both systems but no synchronization of observations. AMVs are retrieved jointly with their heights from the disparities between triplets of ABI scenes and the paired MODIS granule. We validate our retrievals against MISR-GOES retrievals, operational GOES wind products, and by tracking clear-sky terrain. We demonstrate that the 3D-wind algorithm can produce high-quality AMV and height measurements for applications from the planetary boundary layer (PBL) to the upper troposphere, including cold-air outbreaks, wildfire smoke plumes, and hurricanes. [ABSTRACT FROM AUTHOR]

The High Resolution Winds (NWC/GEO-HRW) software is developed by the EUMETSAT Satellite Application Facility on Support to Nowcasting and Very Short Range Forecasting (NWCSAF). It is part of a stand-alone software package for the calculation of meteorological products with geostationary satellite data (NWC/GEO). NWCSAF High Resolution Winds provides a detailed calculation of Atmospheric Motion Vectors (AMVs) and Trajectories, locally and in near real time, using as input geostationary satellite image data, NWP model data, and OSTIA sea surface temperature data. The whole NWC/GEO software package can be obtained after registration at the NWCSAF Helpdesk, www.nwcsaf.org , where users also find support and help for its use. NWC/GEO v2018.1 software version, available since autumn 2019, is able to process MSG, Himawari-8/9, GOES-N, and GOES-R satellite series images, so that AMVs and trajectories can be calculated all throughout the planet Earth with the same algorithm and quality. Considering other equivalent meteorological products, in the '2014 and 2018 AMV Intercomparison Studies' NWCSAF High Resolution Winds compared very positively with six other AMV algorithms for both MSG and Himawari-8/9 satellites. Finally, the Coordination Group for Meteorological Satellites (CGMS) recognized in its '2012 Meeting Report': (1) NWCSAF High Resolution Winds fulfills the requirements to be a portable stand-alone AMV calculation software due to its easy installation and usability. (2) It has been successfully adopted by some CGMS members and serves as an important tool for development. It is modular, well documented, and well suited as stand-alone AMV software. (3) Although alternatives exist as portable stand-alone AMV calculation software, they are not as advanced in terms of documentation and do not have an existing Helpdesk. [ABSTRACT FROM AUTHOR]

Global wind observations are fundamental for studying weather and climate dynamics and for operational forecasting. Most wind measurements come from atmospheric motion vectors (AMVs) by tracking the displacement of cloud or water vapor features. These AMVs generally rely on thermal infrared (IR) techniques for their height assignments, which are subject to large uncertainties in the presence of weak or reversed vertical temperature gradients near the planetary boundary layer (PBL) and tropopause folds. Stereo imaging can overcome the height assignment problem using geometric parallax for feature height determination. In this study we develop a stereo 3D-Wind algorithm to simultaneously retrieve AMV and height from geostationary (GEO) and low Earth orbit (LEO) satellite imagery and apply it to collocated Geostationary Operational Environmental Satellite (GOES) and Multi-angle Imaging SpectroRadiometer (MISR) imagery. The new algorithm improves AMV and height relative to products from GOES or MISR alone, with an estimated accuracy of <0.5 m/s in AMV and <200 m in height with 2.2 km sampling. The algorithm can be generalized to other LEO-GEO or LEO-LEO combinations for greater spatiotemporal coverage. The technique demonstrated with MISR and GOES has important implications for future high-quality AMV observations, for which a low-cost constellation of CubeSats can play a vital role. [ABSTRACT FROM AUTHOR]