Search

The European Community is striving for a sustainable society as suggested by the UN's 2015 sustainability goals. The circular economy in the paper and packaging industry is of particular importance here because it consumes many resources. The paper industry in Germany with a fiber recycling rate of 85% in 2022 is already a pioneer and role model for other industries. All materials should be recyclable. Fiber-based composites/laminates are currently becoming increasingly important. Essential questions are: which collection systems and recycling paths should be used for fiber-based composites/laminates, and where are there currently challenges with recycling? To answer these questions, 58 questionnaires answered by German experts and practitioners in the German paper industry were evaluated. Wet-strength papers, adhesives, plastic coatings and wax dispersions were perceived as a problem by 70% of all respondents, and packaging residues by almost 40%. Additionally, 90% stated that the composition of paper for recycling changes regularly due to legislation, trends and innovations, while 60% attributed this to recent changes in legislation. For at least 80%, virgin fibers from packaging are valuable for paper recycling, but only 15% of respondents stated that virgin fibers compensate for the disadvantages of rejects. Almost 90% expected challenges with fiber-based composites/laminates in the existing paper for recycling processes. Overall, the collection and recycling of fiber-based composites/laminates in conventional paper for recycling collection and the recycling system is not desirable. An integrated collection, sorting and recycling system should be considered, especially because a further increase in fiber-based composites is to be expected. In the end, the design for recycling and following recycling guidelines are the key to the recycling industry in the future. Good recyclability of fiber-based composites/laminates would improve their acceptance by paper recyclers. Their virgin fibers are particularly valuable. The results of our study are relevant to the recycling and fiber industry, standard-setting bodies, regulatory authorities and research. The limitation of this study is that experts from the paper industry were interviewed, but the recyclability of the fiber materials was not analyzed by measurement, and the machine technology of the interviewees could not be examined and evaluated. [ABSTRACT FROM AUTHOR]

The environmental performance of tissue paper varies greatly based on factors such as the type of fibre used as the raw material, the production process and the fuels used to meet the energy requirements. One possible strategy to decrease greenhouse gas emissions in tissue production is the integration of pulp and paper mills and their energy systems at the same site. However, the environmental trade-offs associated with this strategy are still unclear. Therefore, this study aimed (i) to assess for the first time the environmental impacts of tissue paper produced at a typical industrial site in Portugal using slush and market pulp as the main raw material, and (ii) to assess the environmental effects of the integration of bioenergy produced in the pulp mill in tissue production. A life cycle assessment was conducted from cradle to gate using real data from the production of eucalyptus wood, eucalyptus pulp and tissue paper. The results showed that energy consumption in tissue paper production is the main hotspot for most impact categories. When bioenergy is used in tissue production, the environmental impacts decrease by up to 20% for categories other than marine eutrophication and mineral resource scarcity. These results are relevant to support decision making concerning sustainable practices not only for the pulp and paper industry but also for the authorities in charge of defining environmental policies, incentives and tax regulations. [ABSTRACT FROM AUTHOR]

Cellulose and paper produce significant waste such as ash, activated sludge, and sludge from the pulp and paper industry. Depending on the raw material, legislation, and subprocesses, these sludges contain around 30–50% organic matter, mainly composed of less than 0.02 mm cellulose fibers and hemicellulose and lignin. This work used sludge from the pulp and paper industry as a substrate for manufacturing mycelium-based biomaterials using the white rot fungus Trametes versicolor. Chemical and surface analyses revealed the formation of new materials. Acoustic impedance analyses revealed that these materials have a noise reduction coefficient and sound absorption average comparable to extruded polystyrene and polyurethane. In addition, the material's thermal conductivity was near that of sheep wool. Therefore, the biomaterials fabricated using sludge and Trametes versicolor have the potential to be a game-changer in the industry as promising thermoacoustic insulators. [ABSTRACT FROM AUTHOR]

Paper producers are increasingly challenged to meet customer demands for high-quality sanitary papers amidst rising price pressures and diminishing quality of recycled fibers. One promising avenue for enhancing paper quality involves augmenting wet strength. For this purpose, synthetic wet strength resins are used, among other things. This study explores the efficacy of utilizing a polyamide-epichlorohydrin resin-based agent for the internal sizing of white wastepaper. Such chemicals, when added to cellulosic fibers in proper amounts before the paper is made, can not only improve water resistance and air permeability of the finished product but also significantly affect both the dry and wet strength paper, which is a crucial aspect for sanitary papers. This study shows that the appropriate addition of resin allows the wetted recycled paper to retain even more than 30% of its dry strength, while in the dry state, the breaking strength of the paper is improved by approximately 46%. As the demand for more sustainable and resistant paper products continues to grow, the use of wet strength agents is expected to increase in the coming years, as well as the need for research in this field. This research therefore undoubtedly contributes to advancing sustainable practices within the paper industry, aligning with the principles of circular economy by optimizing the utility of recycled fibers while maintaining product quality. [ABSTRACT FROM AUTHOR]

Mineral oil has been used for many years in various electrical equipment, including transformers, as a cooling and insulation medium. However, its low biodegradability and poor performance in terms of fire protection have prompted the search for fluids to replace it, with vegetable oils being prominently considered. In this study, the dielectric, chemical, and physical properties of four vegetable oils obtained from different seeds (sunflower, rapeseed, soybean, and palm) and a biodegradable synthetic fluid are analysed throughout their lifespan in transformers. Their performances are compared with a traditional mineral oil to assess which one is more suitable for use in transformers employing this type of paper. To achieve this, the fluids were subjected to thermal ageing in combination with copper and a thermally upgraded kraft (TUK) paper, with its degradation controlled by measuring the degree of polymerisation. The results demonstrate that the origin of the vegetable oils affects their properties and degradation rates. It was found that most of the alternative fluids are suitable for use in transformers with the TUK paper and that they can increase their lifespan. [ABSTRACT FROM AUTHOR]

In order to obtain solutions to the coal mining region demand in southern Brazil for high-performance and low-cost technosols within a concept of mineral circularity and sustainable development of the coal sector, this study aims to evaluate the functional feasibility of the combined use of a residual fraction of coal tailing, waste from the rice and poultry agro-industry, as well as the cellulose industry, as raw materials for technosol development. Characterizations (XRF, LOI, ICP-OES, pH, XRD, and sulfur forms) were performed to adjust the waste proportions used in the constructed soil, as defined based on the clay content of the coal tailing, the organic carbon content of the poultry litter, and technical recommendations for the use of synthetic gypsum in agricultural soils. Based on the characterizations of the residues, a greenhouse experiment was designed, consisting of four technosol formulations (T1–T4). Initially, an ecotoxicity test was conducted with the treatments in contact with Allium cepa L. (onion) to determine the degree of technosol toxicity. Field tests were then carried out, which were replicated three times in a completely randomized block design, with the germination and growth of Lactuca sativa L. (crisp lettuce) as a bioindicator. The fertility of the treatments was analyzed eight weeks after the establishment of the experiment and compared to standard values for agricultural soils. The characterization performed with the individual wastes demonstrated the potential for application in technosols according to current regulations. The ecotoxicity tests showed that the soil was not toxic to the plant in any of the treatments studied. The field experiment demonstrated no difference in germination between the treatments. However, the development of lettuce seedlings occurred only in technosol formulations T2 and T3, highlighting the potential of the studied residues for the construction of technosols. [ABSTRACT FROM AUTHOR]

Integration of sustainability into industry has encouraged practices of circular economy, reusing and recycling resources. This paper studies alternative solutions to materials traditionally used for unpaved roads, with a byproduct of the pulp and paper industry (not pre-treated), and analyses its valorisation potential from a geotechnical perspective. Two approaches were adopted: (1) assessment of geotechnical properties of base materials (aggregate, local soil and byproduct) and mixtures (aggregate/local soil and byproduct, 3% or 6%); (2) design of the base layer (case study), considering different solutions for the material forming that layer, assessing its height and life cycle. The small incorporation percentages studied changed the geotechnical properties of aggregate and local soil, reducing sensitivity to water and increasing the water content for optimum compaction. The CBR of mixtures reduced with the incorporation of the byproduct. For the case study, incorporation of byproduct (6% maximum) in the local soil did not significantly affect the base layer height. Total replacement with the byproduct is mechanically possible. For the fixed height of the base layer, incorporating the byproduct in traditional materials reduced the unpaved road life cycle, reflecting CBR reductions. From a geotechnical perspective, the valorisation of this byproduct is promising, and from an industry point of view, its use (geotechnical valorisation) represents a way to promote circular economy and sustainability. [ABSTRACT FROM AUTHOR]

The textile industry of Pakistan, a major contributor to its economy, is encountering serious sustainability challenges, akin to many developing nations. The literature is replete with assertions on the importance of sustainability; however, cross-functional research is sporadic. This paper theoretically links Green HRM (GHRM) practices, Green SCM (GSCM) practices, and Triple Bottom Line (TBL) performance within this context. In scaffolding through Resource Orchestration (ROT) and Dynamic Capabilities (DCT) theories, a conceptual framework is proposed. We posit that GSCM transforms GHRM practices into tangible, eco-friendly supply chain activities resulting in enhanced sustainable performance, thereby playing a mediating role. Additionally, a unique interplay of Entrepreneurial Orientation (EO) as a moderator between GHRM and GSCM is introduced. Firms with higher levels of EO employ innovative approaches to implement GHRM practices into their supply chain strategies, leading to robust GSCM initiatives. The literature review indicates that research on the synergistic effects of GHRM and GSCM on TBL performance in developing nations is scarce. The study warrants carrying out empirical validation and provides a clear plan for future research. The exclusive emphasis on Pakistan's textile industry introduces contextual intricacies, facilitating a profound comprehension for implementing sustainable practices within the constraints and opportunities of an emerging economy. [ABSTRACT FROM AUTHOR]

The use of biodegradable paper pulp pots has been gaining traction, especially among environmentally conscious consumers and horticultural practitioners who prioritize sustainability. The choice between paper pulp and polyethylene nursery pots in horticultural practices is a complex decision, involving considerations such as environmental impact, cost-effectiveness, durability, and overall sustainability. This study aims to provide practical insights into the comparative performance of paper pulp and polyethylene pots, specifically in terms of plant health, degradation, and techno-economic considerations. The study involved the growth performance assessment of four plant species, Cannonball Tomato, Celebrity Tomato, Parris Island Lettuce, and French Marigold, in a greenhouse experiment setup. Additionally, a degradation analysis was conducted to determine the average degradation rate and pattern. Finally, a techno-economic analysis compared the value of plant health and degradation with the market price. By evaluating the quality performance aspects of paper pulp pots, this study not only provides valuable insights but also identifies potential areas of improvement for other biodegradable pots, thereby contributing to the ongoing efforts to promote sustainable horticultural practices. [ABSTRACT FROM AUTHOR]

This study aims to investigate the feasibility of using paper made from eco-friendly recycled and non-woody plants in graphic technology, particularly in offset printing. Instead of changing the composition or modifying the surface properties of the paper, the focus was on enhancing the print quality by modifying the printing ink. By modifying the printing inks, the quality of the prints on recycled and non-woody paper can be optimized, which in turn reduces the need for paper made from primary fibers. This approach can expand the use of alternative materials in graphic technology and design. The objective was to optimize the print quality on these sustainable materials. Five types of uncoated paper were used, with high-quality uncoated offset paper based on virgin fibers serving as a reference. Laboratory tests of the basic and surface properties were carried out to measure the paper quality parameters that are important for offset printing. The influence of the paper composition on its optical and colorimetric properties was also investigated. The interaction between the selected papers and offset inks was examined through measurements of adhesion parameters and ink transfer, i.e., the paper's ability to accept the ink. To enhance the applicability of the investigated papers as printing substrates in the graphic industry, SiO2 and TiO2 nanoparticles were added to the offset inks. The influence of the paper composition on the colorimetric properties of the prints was also investigated. The print uniformity, as an important quality characteristic, was determined by measuring the mottling index. The research findings indicate that incorporating SiO2 and TiO2 nanoparticles into offset inks can enhance the interaction between the paper and ink, leading to improved print quality. This study provides new perspectives on the possibilities of using recycled and non-woody plant paper in offset printing without significantly compromising the quality of the print. [ABSTRACT FROM AUTHOR]

This paper describes the process used to produce thermoplastic building materials from non-recyclable mixed plastic–paper packaging waste. A first step was dedicated to an innovative and sustainable sterilization technology for non-recyclable waste, based on exposure to microwave radiation in closed air-circulation ovens. Further, composites with different cellulose contents and with two polymer matrices, respectively, were obtained using an injection process, and the samples were subjected to mechanical and physical tests. Due to their superior features, the products based on mixed polypropylene–paper packaging waste may successfully replace the classic polyvinylchloride-based wood–plastic composites. The environmental impact of mixed plastic–paper packaging waste was analyzed, and the sustainability of the thermoplastic technology was demonstrated from an economic and environmental point of view. [ABSTRACT FROM AUTHOR]

It is important that engineers are educated to consider sustainability in their work. Thermodynamics is a fundamental course required in several engineering majors that has a natural connection to sustainability topics (e.g., energy and limits on efficiency). This work examined how sustainability was included in university-level engineering thermodynamics courses, based on 18 peer-reviewed papers that described Scholarship of Teaching and Learning studies. This review found that environmental issues were included in 15 courses, social issues in 9 courses, and economic issues in 5. There were 11 papers that included topics related to one or more of the United Nations' Sustainable Development Goals (SDGs), with 8 of the 17 SDGs represented by one or more papers. The learning outcomes from the courses provided many examples of cognitive outcomes at all six levels of Bloom's taxonomy. In contrast, affective domain outcomes were generally not explicit. Methods of integrating sustainability topics included mathematical examples, labs, projects, service-learning, application-based learning, simulation tools, and book reviews. These examples should inspire instructors to foster sociotechnical mindsets toward engineering, which are a key to educating engineers who value sustainability and who will advocate for its importance in engineering. [ABSTRACT FROM AUTHOR]

Waste management plays an important role in sustainable development. The innovative management of waste results in minimizing the adverse effects of climate change, and social and economic sustainability. The creation of Sustainable Development Goals (SDGs) by the United Nations in 2015 was an important step toward environmental sustainability, whereby the 17 goals focus on strengthening the means of implementing and revitalizing the Global Partnership for Sustainable Development. This research paper applies a systematic literature review using the PRISMA methodology to analyze different published research papers and research reports mainly focused on waste management and its relationship with the SDGs. This paper extensively discusses the context of waste management, SDGs, waste indicators in SDGs, and the relationship between SDGs and waste management. This paper also widely discusses the aspects of waste management regarding SDGs. The results are further divided into two sub-categories, including descriptive results, which elaborate the different approaches that are used to review the literature for this paper, and thematic results, which include the key results and discussions of different aspects of this paper. The analysis of different published research papers and research reports mainly focuses on waste management and its relationship with the SDGs. This study presents a discussion of (1) the detailed context of waste management about SDGs, (2) the waste indicators in SDGs and (3) the relationship between waste management and SDGs. This study suggests future possible areas of research by extending the regional boundaries, increasing the number of papers, focusing on more specific SDG goals and targets and studying case studies based on the specific targets and indicators. [ABSTRACT FROM AUTHOR]

This article introduces the concept of ecological costs associated with the waste paper recycling system. The costs associated with this process include resource consumption, waste emissions, ecological damage, and production processes. To analyze the ecological costs of deviations from the baseline material flow in a waste paper recycling system, a benchmark material flow diagram is constructed using the material flow analysis method. The diagram illustrates a fully closed one-way material flow of the recycling system, which is highly abstracted and simplified. The study analyzed the ecological costs of the benchmark material flow and the impact of deviations from it. The results suggest that the circulation of materials within and between processes increases the ecological cost of the waste paper recycling system. Furthermore, the release of materials from a process into the environment also contributes to its ecological impact. However, the introduction of external materials into the recycling system can reduce its ecological impact, particularly if these materials are recycled resources. The study emphasizes the significance of considering ecological costs in waste paper recycling systems to minimize their environmental impact. [ABSTRACT FROM AUTHOR]

Faculty mobility is one of the most important research issues in the field of higher education. Reasonable faculty mobility can actively promote the fair, coordinated, balanced, healthy, and sustainable development of higher education. Scientific impact is the best proof of faculty members' research abilities and is often represented by the quality of their articles. In particular, the gradual increase in citations of high-quality papers is undoubtedly an important reflection of healthy development in the academic field. This paper aims to explore the influence of faculty mobility on scientific impact, while comparative analysis is used to investigate whether there are disciplinary differences in the relationship between faculty mobility and scientific impact. Four major disciplines—sociology, mathematics, mechanical engineering, and philosophy—are selected as the scope of this study. Articles in these four major disciplines from 2000 to 2020 are obtained from the Web of Science, and Spearman's rank correlation coefficient and the Wilcoxon signed-rank test are used to analyze the collected data. The results indicate the following: (1) faculty mobility has increased, with differences across disciplines; (2) mobility leads to a decrease in the number of citations, which decreases significantly with increased mobility frequency; and (3) the impact of mobility has disciplinary differences, with a relatively obvious decrease in mechanical engineering. [ABSTRACT FROM AUTHOR]

This paper explores the research trends in the literature about supply chain disruptions published over the last 20 years through a comprehensive review and keyword-based analysis. A sample of 4239 papers retrieved from Scopus was analyzed to identify the key themes covered and the shifts in time of those themes. The results highlight a significant rise in the number of publications on supply chain disruptions since 2021, reflecting the dynamic nature of supply chains and the need to adapt them to increasingly complex scenarios. The findings point out the importance of resilience and risk management but also the progressive shift toward technological innovations and digital tools, as a means to enhance supply chain robustness and sustainability in response to recent global disruptions (e.g., the COVID-19 pandemic, the Russia–Ukraine conflict, and the climate change). From the analyses carried out, interesting opportunities for future research directions are delineated. This study represents a unicum in the scientific literature in terms of the number of articles analyzed, the timespan, as well as the scientometric approach adopted. Finally, the paper highlights the main trends in the field of supply chain disruptions, providing valuable insights for future research activities. [ABSTRACT FROM AUTHOR]

Labels are a crucial component of products, offering informational content and attractive visuals; therefore, the durability of the print is an important quality requirement. On the other hand, in accordance with eco-design, the recyclability of printed labels is vital. In our research, the focus was on the assessment of the durability, recyclability, and deinkability of printed label paper equipped with printed RFID tags. The determined color fastness of electrophotographic prints affected by various environmental factors showed good resistance to dry rubbing and, in most cases, light and moist–heat treatment, confirming the applicability of digital printing on self-adhesive biodegradable paper labels. In the second part of this study, recyclability was assessed, and a comparison between the deinkability of the offset and digital prints and two conductive functional inks was conducted. Good deinkability was observed for the printed RFID antennas on both the offset and electrographic prints, with only a small deterioration in optical properties, especially when nano-silver conductive ink was used. The study highlights the importance of the selection of materials and printing techniques when considering the environmental impact of printed electronics. The results showed that INGEDE 11 is a suitable deinking method for printed RFID antennas on offset and electrographic prints. [ABSTRACT FROM AUTHOR]

Packaging waste correct sorting hugely impacts fiber-based packaging circularity. Currently, this is more crucial than ever, also due to the increased market share of fiber-based packaging. This study evaluated the relationship between the aesthetic properties and user material sorting actions of lightweight dispersion-coated and uncoated paper substrates. Unlike previous literature, no labeling or graphics were involved in this study, focusing on the physical and aesthetic properties of both coatings and substrates. Untrained panelists participated in a multi-phase (descriptive and hedonic) analysis involving a questionnaire and antonym scales about samples' visual and tactile properties, which were also characterized. The results highlight a remarkable panelist's ability to assess the relative gloss and roughness. Perceived roughness and mattness statistically significantly correlated to cellulosic material identification. Moreover, material sorting into the paper recycling stream was statistically significantly regulated by sample mattness, followed by sample roughness. This work suggests that, without any graphic or textual information, the combination of substrate characteristics and coating formulation strongly impacts the packaging aesthetics, hence packaging perception as paper-based material. Consequently, the correct material identification and sorting can be encouraged by proper packaging materials selection and coating development. [ABSTRACT FROM AUTHOR]

The conservation of the immense archival heritage of a country like Italy presents scholars with the enormous challenge of finding techniques and procedures that enable rapid and large-scale interventions, especially in cases of biodeterioration. The volume of material to be preserved and often the inadequacy of the storage conditions constitute crucial factors that promote microbial growth on substrates such as paper, leather, and parchment. These materials serve as primary sources of sustenance for fungi and bacteria which can infect the collections, and so it is frequently necessary to adopt chemical mass-disinfection treatments. These treatments are often expensive, polluting, and hazardous to the assets, the operators, and the environment. The use of ionizing radiation can provide an environmentally sustainable alternative to the traditional mass disinfection treatments of library and archive materials, which currently involve chemical agents (such as ethylene oxide) that impact the environment and human health. The use of such chemicals is increasingly subject to stringent restrictions. In this work, we report and discuss the advantages and disadvantages of physical disinfection methods, focusing on the use of radiation for disinfection treatments and their effects. [ABSTRACT FROM AUTHOR]

Achieving significant breakthroughs in both the fundamental theories and technological applications of artificial intelligence is essential for fostering its long-term development. Under the guidance of Professor Qian Xuesen's theory of technological science, exploring the internal mechanisms of knowledge evolution in artificial intelligence holds profound theoretical and practical significance for promoting sustainable technological advancement. This study draws on literature from the Web of Science (WOS) database and employs methods such as knowledge mapping, natural language processing, clustering analysis, and citation analysis to outline the knowledge structure of the field, clarify the trajectory of sustainable development, and trace the technological genealogy of VR/AR technologies.This study divides the knowledge structure within the field of technological science into "basic theoretical knowledge—applied basic knowledge—applied knowledge", enriching Qian's theory of technological science from within and providing strong intellectual support and technological pathways for sustainable technological development in practice. Artificial intelligence encompasses 10 distinct knowledge domains, among which machine learning and deep learning constitute the basic theoretical knowledge, data intelligence, computer vision, and swarm intelligence are the applied basic knowledge, and image processing and human-computer intelligence are the applied knowledge. The development of VR/AR technology has formed two main sustainable development paths: "machine learning—data intelligence—intelligent systems—human computer intelligence", and "deep learning—computer vision—image processing". [ABSTRACT FROM AUTHOR]

The focus of this paper is on the generation of food waste by small and micro restaurants, specifically on the perceptions of representatives of these restaurants. Do they perceive this generation of food waste as problematic, and do they perceive that they have enough knowledge about how to minimize this generated food waste? With data from a sample of 200 Dutch restaurants, which were collected through surveys and analyzed with regression analysis, we came to two key findings. The first key finding is that our respondents hardly perceive the food waste that is generated in their own restaurant as problematic. The second key finding is that they perceive they have limited knowledge about how to minimize the food waste that is generated in their own restaurant. The main influencing factor for both perceptions appeared to be the actual level of food waste generated in their own restaurant. This paper continues with a number of recommendations for future research, to apply other research techniques and to study other sectors as well. The paper ends with practical recommendations for the representatives of the small and micro restaurants, as the findings of this paper suggest a need for targeted educational and training programs to enhance food waste management in their restaurants, contributing to broader sustainability goals. [ABSTRACT FROM AUTHOR]

Cardboard packaging is a good example of sustainable material use, yet even more sustainable solutions are available, such as replacing wood fibers with those from alternative sources like agricultural waste. In our research, we produced paperboard from fibers obtained from waste tomato stems using a pilot paper machine, and its basic, surface, and mechanical properties were then determined. Additionally, we produced corrugated cardboard from the tomato fiber-based paperboard and analyzed its performance under different environmental conditions. A comparative analysis was made with commercial corrugated cardboard to determine the differences in mechanical properties and the quality of the prints made using the flexographic printing technique. The results indicated that the properties of tomato fiber-based paperboard and corrugated cardboard are sufficient for many packaging applications. Analyses showed that the mechanical properties of both commercial and corrugated cardboard produced from tomato stems were affected by the environmental conditions, while the change in print quality was minor. Exposure to high humidity had a much greater effect than exposure to low temperature. High humidity lowered the tensile and bursting strength and resistance to compression, resulting in decreased strength and stiffness, while low temperature had a less severe effect. Nevertheless, corrugated cardboard made from tomato-based paperboard can be used for storage of fresh produce locally, as well as for transport packaging, provided the transport box is designed to address its poor stacking strength. The print quality of this cardboard is also suitable for transport packaging, and the readability of the UHF RFID tags remains satisfactory. The findings of this study have significant implications for the development of sustainable materials. The successful use of tomato stems, a waste product from agriculture, in the production of corrugated cardboard supports the circular economy by turning waste into a valuable resource. [ABSTRACT FROM AUTHOR]

Stormwater management ponds (SWMPs) are an important tool for sustainable urban stormwater management, controlling the quantity and quality of stormwater runoff in cities. Beyond their engineering purpose, SWMPs may hold ecological value that is often overlooked. This is especially the case for the array of geochemical, physical, and biological processes (i.e., ecosystem functions) in SWMPs. Here, we performed a scoping review of ecosystem function in SWMPs to summarize current knowledge and identify research needs. We searched peer-reviewed papers using the Web of Science database. Papers that did not report specifically on SWMPs, did not discuss ecosystem function, or were solely based on ecotoxicological tests were excluded from further assessment. For the remaining papers, information on year of publication, scope, and key findings was extracted. We found that a total of 55 papers on ecosystem function in SWMPs have been published since 1996. Our review identified important areas for advancing knowledge about nutrient dynamics, contaminants processing, sedimentation, temperature, habitat provisioning, and biodiversity in SWMPs. Overall, we identified a need to further understand how factors related to pond design and landscape and management practices influence ecosystem function. There is also a need to understand the effect of climate change on ecosystem function and to examine the interactions between ecosystem function and humans. Such information will not only provide opportunities for researchers to better understand ecological value, but also facilitate more effective sustainable management of SWMPs. [ABSTRACT FROM AUTHOR]

The development trends and research layout of agricultural resources and the environment (ARE) are the focus of global attention. In this study, we compiled a data set of SCI papers published in the ARE field since the 13th Five-Year Plan. Thereafter, the topic extraction model of Latent Dirichlet Allocation (LDA) was used to mine the text content so as to explore the research layout of global ARE. The results show that, between 2016 and the time of this study, 31,559 articles were published in the ARE field, exhibiting an overall upward trend. During this time, China and the United States were the main forces in paper publishing. The Chinese Academy of Sciences (CAS), Northwest Agriculture and Forestry University, and the US Department of Agriculture were the top three publishing institutions. Research institutes in China, the United States, Russia, Sweden, the Netherlands, Brazil, and Australia cooperated closely, and the CAS was at the center of the cooperation network. The clustering results of text topics based on the LDA model show that three topics—namely, the interaction mechanisms of plants, the rhizosphere, and microorganisms; the mechanisms and predictive evaluation of soil landslides or erosion; and the decomposition and interaction response of organic matter in agroforestry ecosystems—have been the hot research areas in this field since 2016. The management and efficient utilization of farmland nutrients, and the technology and mechanisms of agricultural waste resource utilization have become key research directions since 2019. The research layouts of China and the United States in this field were analyzed, and the similarities and differences were compared. In addition, suggestions for the future development of ARE are proposed. This study is of great significance for the overall development trend of ARE, the timely tracking of scientific research hotspots, outlining key research and development directions, and promoting scientific and technological innovation. [ABSTRACT FROM AUTHOR]

The pulp and paper industry (PPI) is a major contributor to the global economy, but it also poses a challenge for waste disposal, as it generates large amounts of several waste streams. Among these, paper rejects are generated during the papermaking process and could account for up to 25% of the produced paper. Moreover, hundreds of millions of tons of paper are produced annually that end up in landfills if not burnt or recycled. Furthermore, the PPI significantly contributes to climate change and global warming in the form of deforestation and water and air pollution. Therefore, the impact of this industry on the sustainability of natural resources and its adverse environmental health effects requires special attention. This review focuses on discussing the sustainable routes to utilize paper waste and rejects from the PPI towards a circular economy. At first, it discusses the industry itself and its environmental impact, followed by the possible sustainable approaches that can be implemented to improve papermaking processes as well as waste management systems, including paper recycling. The literature indicates that paper recycling is crucial because, if appropriately designed, it significantly lowers greenhouse gas emissions, water and resources consumption, and manufacturing costs. However, several concerns have surfaced about the different chemicals that are used to improve recycling efficiency and recycled paper quality. Furthermore, paper recycling is limited to up to seven times. This review, therefore, goes on to highlight several sustainable waste management routes for paper waste utilization other than recycling by emphasizing the concept of converting paper waste and rejects into energy and high-value materials, including biofuels, biohydrogen, biomethane, heat, nanocellulose, hydrochar, construction materials, and soil amendments. Both the benefits and shortcomings of these waste management routes and their applications are discussed. It becomes clear from this review that sustainable management solutions for paper waste and rejects are implementable, but further research and development are still needed. [ABSTRACT FROM AUTHOR]

The valorization of black liquor, a by-product produced in considerable quantities from the paper manufacturing processes, has demonstrated the effectiveness of thermal reconversion into pyrolysis gas, bio-oil, and bio-char, a sustainable approach placing the feedstock into a circular economy concept. The present study focused on developing disposal solutions through energy recovery via pyrolysis at 300 °C and 450 °C when lignite and nanomaterials (such as Cu-Zn-MCM-41, Ni-SBA-3, or Ni-SBA16) were used as catalysts. The results were compared to those of non-catalytic pyrolysis. The use of the Cu-Zn-MCM-41 catalyst proved to be efficient for pyrolysis gas production, reaching 55.22 vol% CH4. The increase in the calorific value of the pyrolysis gas was associated with the use of the Cu-Zn-MCM-41, showing a value of 42.23 MJ/m3 compared to that of the non-catalytic process, which yielded 39.56 MJ/m3. The bio-oil resulting from the pyrolysis with Cu-Zn-MCM-41 showed the highest energy value at 6457 kcal/kg compared to that obtained with the other two nanocatalysts, Ni-SBA-3 and Ni-SBA-16, as well as that of the raw material, which had a value of 3769 kcal/kg. The analysis of bio-char revealed no statistically significant differences when comparing the outcomes from using the various nanocatalysts, suggesting their minimal impact on the energy content. [ABSTRACT FROM AUTHOR]

The interest of the research community in happiness and its associated issues has been steadily growing over the years, including during the period marked by the COVID-19 pandemic. The pandemic has brought about significant changes in various aspects of people's lives. In this study, the objective is to analyze the themes and the most significant trends in papers dedicated to happiness in the context of COVID-19 during the period following the onset of the pandemic. To achieve this, the authors have compiled a dataset of papers sourced from Clarivate Analytics' Web of Science Core Collection database, which were extracted using keywords related to both happiness and COVID-19. This database comprises 1932 articles. The researchers have conducted a comprehensive bibliometric analysis of this dataset, providing insights into the most prolific authors in this field, the most frequently cited documents, and the preferred journals for publishing this research. The authors also explore details related to collaboration networks and author clusters. An n-gram analysis is performed on titles, abstracts, keywords, and keywords plus, offering a deeper understanding of the primary research themes. Furthermore, the contributors present a review of the top 10 most cited papers, which completes the analysis and underscores the research trends related to happiness in the context of COVID-19. [ABSTRACT FROM AUTHOR]

To reduce the pollution caused by paper sludge in the environment and overcome issues of poor water resistance and brittleness in Magnesium Oxychloride Cement (MOC), the MOC was modified by adding different dosages of paper sludge. The mechanical properties and damage modes of composite MOC materials containing paper sludge were studied by uniaxial compression tests. Under cyclic loading conditions, the damage progression of MOC composites was characterised using the tensile-shear conversion factor (Tsc) and by monitoring the energy parameters (elastic strain energy, plastic strain energy and dissipation energy). The results show that the average peak stress drop of MOC composites gradually increases with the increase in paper sludge dosage. Under uniaxial compression conditions, the Tsc of the MOC composites decreases from 0.99 to 0.44, and the damage mode is transitioned from brittle tensile damage to tensile-shear damage, X-shaped conjugate surface shear damage and finally to pure shear damage with an increase in doping. During cyclic loading conditions, the brittleness of MOC composites gradually decreases with an increase in paper sludge doping, which verifies the effect of paper sludge on the mechanical properties of MOC materials and the change in damage modes from the perspective of energy dissipation. [ABSTRACT FROM AUTHOR]

Sustainability issues constitute a distinct subdiscipline of librarianship and information science, with its own areas of study, methods, and areas of application. Despite being nearly 30 years old, there are still divergent opinions on its current phase of development and its links to other scientific disciplines. The authors aim to clarify and summarize the ongoing discussion through citation analysis, shedding light on the lifecycle of research papers in sustainability-oriented library and information science, the current research subjects of focus, the influence of subdomains within the discipline on other scientific areas, and the overall quantitative and qualitative landscape of the discipline. A detailed elucidation of the inquiry's results is intended to outline the discipline's cognitive structure and its impact on sustainability science. The lifecycle of disciplinary papers indicates the dynamic development of the field. Sustainability-oriented library and information science is well-established, and its research focus has already been consolidated. The optimal citation window for measuring the impact strength in this discipline is a period of 3 to 4 years. "Culture" and "Education" have been identified as the most forward-looking subdisciplines, whereas "Buildings" and "Collections" exhibit less dynamic growth. The social sustainability pillar is the dominant one, while the environmental pillar is slightly less prominent. The economic pillar is the least represented. Although the majority of information exchange occurs within the discipline, it maintains strong and numerous links with several other fields, including both technical and social sciences, as well as the humanities. [ABSTRACT FROM AUTHOR]

The article explores the impact of tourism and commercialization on intangible cultural heritage, using the Boloye dance in Côte d'Ivoire as a case study. The dance, originally a secretive ritual performed by the Pɔrɔ society in the Sénoufo community, has transformed into a public cultural performance. The study explores how this cultural practice has been adapted to engage broader audiences without compromising its ritualistic and cultural integrity. This is carried out through fieldwork conducted in Korhogo, including participant observations, interviews with performers, and the analysis of social media content. The paper argues that the Boloye dance's resilience and continued vitality are due to its dynamic adaptation within cultural boundaries, allowing it to serve both as a community resource and a public spectacle. This is enabled through the Sénoufo flexible cultural framework, which allows for the negotiation of changes within spiritually sanctioned boundaries. The article concludes that tourism and the commercialization of cultural practices, in this case, do not compromise the authenticity of the practices or the cultural integrity of the people who perform them. The case study challenges a commonly expressed view in previous research that tourism necessarily erodes cultural authenticity, showing instead that cultural practices can evolve while retaining their significance. The paper contributes to a scholarly and public debate on the sustainability of intangible cultural heritage in the context of global tourism and economic development and change. [ABSTRACT FROM AUTHOR]

Nonprofit Organizations (NPOs) are adopting technology to improve their quality of services, scale up, or reduce operation costs. However, due to the heterogeneity of systems they use, NPOs face system-integration challenges when collaborating with other organizations. Middleware is an intermediary software that assists dissimilar systems in working together. This paper explores middleware applications, opportunities, and challenges within the sector. It extensively reviewed the current state of research on middleware usage in the nonprofit sector for all papers published in Scopus and Web of Science (WoS) until 2023. Out of 127 papers returned, only 31 remained after removing duplicates, invalid entries, and out-of-scope publications. Then, we synthesized insights from a thorough survey of these selected papers. In light of the survey results, we observed that NPOs primarily use middleware in a few of the Sustainable Development Goals (SDGs), namely, health (SDG 3), NPO operations (SDG 8 and 9), NPO collaborations (SDG 17), development of sustainable cities (SDG 11), security and disaster management (SDG 16), and education (SDG 4). We also identified several challenges related to using middleware in the nonprofit sector, which include privacy, security, system development and performance, data processing and transfer, and volunteer attrition. [ABSTRACT FROM AUTHOR]

Accurate detection and classification of traffic signs play a vital role in ensuring driver safety and supporting advancements in autonomous driving technology. This paper introduces a novel approach for traffic sign detection and recognition by integrating the Faster RCNN and YOLOX-Tiny models using a stacking ensemble technique. The innovative ensemble methodology creatively merges the strengths of both models, surpassing the limitations of individual algorithms and achieving superior performance in challenging real-world scenarios. The proposed model was evaluated on the CCTSDB dataset and the MTSD dataset, demonstrating competitive performance compared to traditional algorithms. All experiments were conducted using Python 3.8 on the same system equipped with an NVIDIA GTX 3060 12G graphics card. Our results show improved accuracy and efficiency in recognizing traffic signs in various real-world scenarios, including distant, close, complex, moderate, and simple settings, achieving a 4.78% increase in mean Average Precision (mAP) compared to Faster RCNN and improving Frames Per Second (FPS) by 8.1% and mAP by 6.18% compared to YOLOX-Tiny. Moreover, the proposed model exhibited notable precision in challenging scenarios such as ultra-long-distance detections, shadow occlusions, motion blur, and complex environments with diverse sign categories. These findings not only showcase the model's robustness but also serve as a cornerstone in propelling the evolution of autonomous driving technology and sustainable development of future transportation. The results presented in this paper could potentially be integrated into advanced driver-assistance systems and autonomous vehicles, offering a significant step forward in enhancing road safety and traffic management. [ABSTRACT FROM AUTHOR]

Citrus fruits are among the most produced and traded agricultural products worldwide, with significant economic and social importance. Despite their importance in the European Union, Middle East, and Africa, the existing literature is limited. Several studies have reviewed different aspects of general agri-food supply chains, but a product-based literature review on citrus supply chains has not been conducted. This paper provides a comprehensive review of the citrus supply chain in these regions, identifying the key research topics, methodologies, and supply chain echelons addressed in the literature. The study employed a systematic review, real-world case studies, and supply chain stakeholders' interviews. This multi-faceted approach allows researchers to highlight research gaps, map a complete citrus supply chain, and provide a detailed material flow and sustainability-oriented overview of potential inputs and outputs at different stages. By incorporating real-world case studies and stakeholder interviews, this paper offers a nuanced and practical perspective on the operational and sustainability challenges unique to the citrus supply chain. This study serves as a guide for future research and enables practitioners to pinpoint areas and strategies for operational improvement across the supply chain. [ABSTRACT FROM AUTHOR]

In recent years neural networks have been used to achieve all 17 SDGs. This paper is directly related to SDG 9. In particular, the application of neural networks in statistics indicates the creation and development of a scientific research infrastructure (including encouraging innovation, SDG 9.5). Also, this paper shows the possibility of the mass practical application of neural networks for statistics in the context of sustainable development (with the possibilit of increasing the number of researchers, SDG 9.5). The paper aims to test the following two hypotheses in the context of SDG 9.5: (1) The rapid growth of scientific interest in neural networks will lead to a decrease in the number of scientific publications in statistics. (2) It is possible to use neural networks for calculating statistical indicators. Bibliometric analysis, mathematical modeling, the calculation of statistical indicators using the new prompt and Excel table z-statistics were used. The scientific novelty lies in the new knowledge obtained by the author for the first time. This study integrates advanced technologies (neural networks) and a traditional field (statistics), which is a significant contribution to innovation and infrastructure development (Indicator 9.5.1). The practical value lies in the ease of the mass use of neural networks for statistical data processing of more than 100,000 units, which is related to Indicator 9.5.2. Thus, this paper represents an important contribution to the stimulation of innovation, thereby building up technological potential and leading to a significant increase in the number of researchers (SDG 9.5). [ABSTRACT FROM AUTHOR]

This paper proposed a novel demountable fabricated joint in frame, which is connected by the prestressed and mortise–tenon connection. The prefabricated components of the demountable structures are designed to be reused, and the joint presented in this paper will promote the sustainable application of prefabricated components in future. The damage process and damage pattern of the internal joints under the horizontal load were analyzed using the refined numerical analysis model based on ABAQUS 6.14. Parametric analyses were conducted simultaneously for five parameters: axial compression ratio, the area and effective initial stress of unbonded prestressed strands (UPSs), the local reinforcement ratio in the core zone of the demountable joint, and the friction coefficient between the interface of concrete. The results showed that the demountable joint exhibits excellent energy dissipation potential under horizontal loads, but the damage was concentrated in the core zone. The deformation of the joint mainly consisted of the self-deformation of the prefabricated components, including bending, bearing and shear, as well as the relative slip deformation between the prefabricated components. The axial compression ratio has a more significant effect on the hysteresis performance compared to the areas of the UPSs and the reinforcement ratio. The initial effective stress of the UPS and the friction coefficient have relatively minor influence on the hysteretic performance of the joint. Finally, this paper recommends the design parameter values (axial compression ratio should not exceed 0.4, area of unbonded prestressed reinforcement should be not lower than Asn=0.02 and not higher than Asn=0.1, the initial stress of the UPS takes the value of 0.75fpu) and outlines optimization measures. [ABSTRACT FROM AUTHOR]

This document is an editorial from the journal "Sustainability" discussing the intersection of emerging technologies, sustainable engineering, and cybersecurity in the digital age. It highlights the rapid pace of technological change and the impact of AI applications in various industries and society. The editorial presents a collection of papers that cover topics such as the detection of ancient artifacts using AI, the evaluation of emerging technologies using bibliometrics, and the taxonomy of blockchain cybersecurity threats. It also explores the integration of blockchain, Big Data, and AI in areas like smart grids and supply chain management. The editorial acknowledges the potential benefits of these technologies but also raises concerns about privacy, security, bias, and regulatory compliance. It emphasizes the importance of robust security measures, ethical considerations, and corporate digital responsibility in managing the implications of digitalization. [Extracted from the article]

As one of the world's largest economies and the biggest emitter of greenhouse gases, China plays a critical role in global environmental management. As China emphasizes new quality productive forces, understanding how green finance can enable green innovation quality (GIQ) is essential for projecting China's influence in the sustainable development of the global ecological environment. This paper sets up a quasi-natural experiment using the Green Credit Policy (GCP) to examine the impact of green financial credit allocation on the enterprises' GIQ. The findings demonstrate that the GCP has the potential to improve the GIQ of the green credit-restricted industries, compared to non-green credit-restricted ones. It is worth noting that as China speeds up its industrial digital transformation and productivity improvement, green financial credit allocation can elevate the digitization level and total factor productivity of green credit-restricted industries, leading to a higher GIQ by curbing corporate shadow banking. Further research shows that fintech and financial regulation can strengthen the positive influence of the GCP on GIQ. Moreover, regional intellectual property protection has a beneficial synergistic effect in combination with the policy. [ABSTRACT FROM AUTHOR]

Innovation in the circular economy (CE) and the deployment of effective circular business models (CBM) have attracted significant attention in times of growing natural resource scarcity. Despite this widespread interest, significant challenges remain between theoretical innovations and effective CBM implementation in any industrial sector where companies pursue cost-saving opportunities through waste valorisation strategies. Since current methods mislead in terms of the real limitations to designing feasible novel products and services under a circular economy, this study proposes exploring determinants underpinning the organisational resilience of CBMs under a resource efficiency strategy through three case studies. As a result of a co-creation process, the implementation of a CBM framework was built upon empirical data and, thence, a phase-based implementation guide was laid out to assist companies in designing and implementing innovative CBM dealing with the complexity of innovative waste valorisation strategies between the PPI and construction sectors. Relevant findings on managerial and policy recommendations encountered along the demo stage are provided in this paper favouring an effective implementation of CE strategies: the role of technological and non-technological aspects within the CBM, the perspective of the ecosystem and its value proposition, and specific guidelines for the different phases of CBM life cycle. [ABSTRACT FROM AUTHOR]

The production process of the traditional paper making process produces a large amount of waste water, known as paper black liquor. It is needed to explore new ways of reusing this waste and replacing part of the base bitumen to reduce the consumption of non-renewable resources, such as petroleum, thus obtaining better environmental, economic, and social benefits. This paper analyses the feasibility of using paper black liquor, which contains a large amount of lignin, as a modifier for bitumen in the paper industry. Samples of modified bitumen were prepared with 15%, 30%, and 45% of the base bitumen replaced by paper black liquor, and a control group of base bitumen was prepared for testing. The samples were subjected to an 85 min short-term ageing test, FTIR scanning test, thermogravimetric test, frequency scanning test, MSCR test, and LAS test. The analysis of the FTIR and thermogravimetric tests showed that the paper black liquor was mainly composed of lignin and some cellulose, and contained a small amount of salts with Na ions; based on the results of the frequency scan, the compatibility analysis of the vGP curve showed that the modified bitumen was more compatible in the high-temperature range after short-term ageing, thus inferring that the water content of the concentrate had an influence on the compatibility, making it necessary to further investigate different optimum water contents to achieve the best performance and benefit. The incorporation of paper black liquor improved the rutting resistance and fatigue resistance of the modified bitumen, and also gave the paper-black-liquor-modified bitumen a better ageing resistance than the base bitumen. While demonstrating the feasibility of using paper black liquor as an bitumen modifier, this study also helps to provide a basis for theoretical applications of biomass materials in the field of road engineering. [ABSTRACT FROM AUTHOR]

The rapid growth of airlines over the last period has led to the development of the aviation industry, resulting in increased requirements for ancillary services. Nowadays, the demand for the use of paper-based documents is increasing day by day as airlines encourage passengers to use more ancillary products. One of the most important issues in the aviation industry is flight safety. The procedures and instructions required for all aviation operations are organized in accordance with the regulations and printed on paper in accordance with the demands. For this reason, since it is mandatory to keep all aircraft maintenance, repair, and operation records on printed paper and to keep them for a certain period of time, aircraft fly with almost their entire weight on paper. Considering the global hazards in the world, although the aviation sector is the least environmentally damaging of all transportation sectors, new solutions have been sought to make aviation operations less harmful to the environment, minimize errors and risks, allow for faster communication, and be safer and more sustainable. In order to meet the demands, studies on reducing the use of paper have been brought to the agenda. In this study, after a literature review, real data from a maintenance, repair, and overhaul organization are used to suggest digital conveniences that can save costs, increase productivity, save space, facilitate documentation and information sharing, keep personal information more secure, and help the environment through paperless living. [ABSTRACT FROM AUTHOR]

Some wastes from the paper pulp production process are still sent to a controlled waste landfill. These materials can constitute alternative resources for constructing road pavements. The study aimed to characterize and explore the sustainable application of two inorganic wastes resulting from the paper pulp process, the dregs (green liquor wastes) and the grits (slaker wastes), in the production of bituminous mixtures by the analysis of samples prepared with 5 and 10% of dregs and 5 and 10% of grits on the baseline reference bituminous mixture AC 14 surf 35/50. Some relevant mechanical properties of the blends were assessed based on Marshall compression, sensitivity to water and wheel-tracking tests. Additionally, water poured on the loose asphalt and compacted slabs' surface was analysed to determine the portion of harmful chemical compounds leached from the asphalt material. The results show that using dregs presented some technical limitations related to mechanical performance and that the incorporation of grits has an acceptable mechanical behaviour. Moreover, the study shows that the measured leachate resulting from water flow in a reference asphalt mixture and the blends with grits are insignificant. It can be concluded that using grits in asphalt mixtures is a promising technique regarding mechanical behaviour and environmental impacts that need further studies. [ABSTRACT FROM AUTHOR]

Melamine-impregnated paper waste (MIPW) is an unavoidable byproduct of the melamine-impregnated paper production process, and it must be urgently disposed. In this paper, due to its high N content, MIPW was used as a N source to co-pyrolyze with camellia oleifera shell (COS). By changing the proportion of MIPW in the raw materials, the migration path of the N was studied during the co-pyrolysis process. X-ray photoelectron spectroscopy (XPS), elemental analysis (EA), total nitrogen analysis (TN) and ultraviolet spectrophotometry were used to determine the content and the types of N-containing components in raw materials and products. The results showed that during the co-pyrolysis process, the N in MIPW and COS would be converted into different types of N-containing components, and the proportion of MIPW in raw materials directly impacts the product distribution and the N migration path. With the increase in the proportion of MIPW from 10 to 50 wt.% (daf, mass ratio), the proportion of N in raw materials that migrated into the solid phase decreased from 27.58 to 16.31 wt.%, while that which migrated to the gas and liquid phases increased from 24.92 and 47.50 wt.% to 25.97 and 57.72 wt.%, respectively. The proportions of N in the raw materials that changed into pyridinic-N, pyrrolic-N and graphitic-N in the solid phase and N2-N in the gas phase were decreased. The proportions of NH3-N and HCN-N in the gas phase and NH3-N and organic-N in the liquid phase were increased. Moreover, synergies were observed during the co-pyrolysis process, which affected the N migration path in the raw material. This study will provide policy directions and theoretical support for the comprehensive utilization of MIPW and COS. [ABSTRACT FROM AUTHOR]

Fine and ultrafine particulate matter are consequences of air pollution in industrialized nations. The use of natural materials for filters produces fewer side effects for humans and the environment, and due to their structural characteristics, they have the potential to effectively filter out fine particles. In this study, we developed an indoor, fine-dust removal filter using Hanji, a traditional Korean paper made from natural materials derived from mulberry trees. We impregnated activated carbon (AC) into the Hanji filter and conducted air permeability and efficiency experiments to determine the improvement in indoor air quality. The Hanji filter showed a removal efficiency of 80.4% within the first minute and 99.1% efficiency by the 38th minute, maintaining an efficiency of >99% thereafter. The dust removal efficiency of the AC-embedded Hanji filter proved superior. The dust adhesion was ~20 g/m2. An AC-embedded Hanji filter has the potential to remove not only fine dust but also volatile substances. The use of natural filters is both effective and sustainable. [ABSTRACT FROM AUTHOR]

Packaging appearance is important in a competitive market. Designers strive to create products that attract customers and often use laminated packaging, due to the attractive appearance and quality characteristics of the material. The circular economy in the recycling of cardboard packaging helps to reduce waste, saves natural resources and increases the quality of the environment. All of the above contributes to sustainable production, but the quality and properties of the obtained recycled paper materials should not be ignored. Recycling of laminated cardboard packaging often has a negative impact on the quality of recycled paper, due to the formation of sticky particles that can affect the optical properties of recycled paper and the efficiency of the recycling process. This article provides insight into the influence of each stage of production of packaging intended for pharmaceutical products on the properties and characteristics of recycled paper. The standard INGEDE 11 deinking method was used to remove dyes and other impurities from the pulp. The obtained optical results of the characteristics of recycled laboratory sheets obtained from laminated and non-laminated cardboard samples were compared in order to determine the impact of each stage of box production on the quality of the paper pulp. The acquired knowledge can be applied in the design phase of a more sustainable product, and laminated materials can be used in luxury products or to increase the functionality of the packaging. Designing for recycling will contribute to an increase in the quality of the obtained paper mass, which is directly related to an increase in the productivity of recycling and the sustainability of the packaging production process. [ABSTRACT FROM AUTHOR]

In order to improve the hydrophobicity of xylan hemicellulose, a simple procedure of its chemical modification with alkyl ketene dimer (AKD), a non-toxic, cost-effective, and eco-friendly chemical, was performed. For this purpose, the reaction products of beech wood xylan and different amounts of hydrophobic AKD were used for paper surface treatment. Thus, the coatings of about 4.5 g/m2 were applied on both sides of base paper in single and three successive layers. To obtain a complete reaction between AKD and xylan hemicellulose, the coated papers were thermal cured (about 110 °C) and the effects of AKD content on the barrier (water, oil, and water vapours) and mechanical properties were analysed. The structural analyses by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) of coated samples emphasized the presence of β-keto-ester compounds as a result of the reaction between xylan hemicelluloses and AKD. This is confirmed by the improving of barrier properties as the AKD content in coating dispersion is higher. The good barrier performance and improved strength properties were obtained for the coated papers with xylan hemicellulose and 1% AKD applied on paper surface in three successive layers (about 4.5 g/m2). In this case, the water vapours transmission rate (WVTR) was 35% lower than those untreated and the resistance to air passing through coated papers was over 3 times higher compared with base paper. There are no results reported on the chemical reaction of xylan hemicelluloses with AKD as well as its application in coatings for paper packaging. In this context, the obtained results in this study can contribute to expand the applications area of hemicelluloses offering a sustainable strategy for the developing of food packaging papers with appropriate barrier properties using biopolymer coating materials. [ABSTRACT FROM AUTHOR]

The flourishing of the tourism market generates gigantic carbon emissions. It is imperative for tourism companies to take action to achieve decarbonization. The emergence of digital technology is gradually becoming an important strategic path for global corporations' technological evolution. Undoubtedly, digital tools provide a fresh opportunity for tourism companies to reduce their carbon footprint. Realizing the positive interaction between digitization and greenization is essential for tourism companies to achieve high-quality development. Aiming to clarify the relationship between digital transformation and company carbon intensity in tourism companies, this study analyzes the influence and mechanism of digital transformation on tourism companies' carbon intensity using data from Chinese A-share listed tourism companies over the period 2005–2020. With the help of textual analysis and high-dimensional fixed effects model, this paper builds a proxy for digital transformation and further tests the causal link between digital transformation and company carbon intensity. The findings indicate that digital transformation significantly reduces the carbon intensity of tourism companies. Alleviating managerial myopia, attracting external resources, and fostering a collaborative culture are three mechanisms through which digital transformation can exert its carbon reduction efficacy. The heterogeneity analysis reveals that this effect is more prominent among state-owned tourism companies, companies with greater board diversity, or companies situated in more favorable business environments. This paper makes three contributions. First, this paper broadens the exploration of how digital advancements affect tourism, discussing the relationship between digital transformation and the carbon intensity of tourism companies. Second, this paper looks beyond a macro perspective commonly used in tourism carbon emission research, undertaking the research at the micro level, filling the research gap in tourism companies' carbon performance. Third, from the aspect of informational effect, this paper provides the mechanism between digital transformation and tourism company carbon intensity creatively. The conclusions offer empirical insights to assist tourism companies in effectively fulfilling their environmental commitments in the digital era. Meanwhile, this paper also provides a useful decision-making basis for the government to promote tourism companies' decarbonization transformation. From the company perspective, tourism companies should take digitalization seriously, fully exploiting the environmental benefits of digital transformation. From the government perspective, local government should further improve the environment for company development, supporting tourism companies' digital transformation with unremitting efforts. [ABSTRACT FROM AUTHOR]

The growing amount of space debris in the low Earth orbit poses a danger to manned as well as uncrewed missions. Additionally, the new business model of providing internet from space is emerging among new space players, making low Earth orbit more crowded. These factors have encouraged the space community to focus on sustainability in space. Satellite manufacturers typically have the capability to perform complete life cycle analysis (LCA) on their own products based on the manufacturing data. However, there is a lack of a method for non-manufacturers such as environmentalists and the general public to predict the carbon footprint of satellite manufacturing using a subsystem-level mass budget. Hence, this paper presents a method to quantify environmental pollution caused by the production of satellite constellations. Starlink is taken as a case study in this paper, and mass budget is predicted based on space systems engineering budget estimation techniques, the parametric method, and Federal Communication Commission orbital data. With the budget table used as an input, space-specific life cycle assessment is performed based on European Space Agency's life cycle inventory database. Finally, the single score for Starlink constellation version 1 was found to be 76 kilo points. This signifies the annual environmental load. These results could be helpful in obtaining an overview of the environmental effects of the production phase of satellite constellations. Further, the results could act as a foundation for further research on implementing more circular approach practices on Earth as well as in space. [ABSTRACT FROM AUTHOR]

It is essential to conduct research on low-carbon behaviour in order to address global climate change and promote sustainable development. This study conducts a thorough examination of a bibliometric analysis of the existing literature in this field. We analysed 129 papers from the Web of Science Core Collection database to conduct a study on the concept of "low-carbon behaviour". Review articles, proceedings papers, and editorial materials were all excluded. This investigation examines a diverse array of research environment factors, including the most highly ranked publications, publication trends, significant publishers, and patterns in citations and publications over time. The primary institutional contributors in the discipline and the most influential works worldwide are also mentioned. The application of advanced visualisation techniques, such as wordcloud representations, the spatial distribution of research output, and co-occurrence and overlay networks, is employed to generate maps of keyword relationships and collaboration networks using Bibliometrix Stable Version, VOSviewer 1.6.20, and Scimago Graphica Beta 1.0.45. This multi-modal methodology enables a comprehensive investigation of significant research issues and emerging directions in low-carbon behavioural studies. This study contributes to the ongoing endeavours to promote sustainable development and mitigate climate change by conducting a comprehensive evaluation of the current state of research and establishing a robust framework for future investigations into low-carbon behavioural patterns and behaviours. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to explore the relationship between part-time farming and the nutrition and health of rural residents, test the possible effects through two potential pathways—income effect and time effect—and further analyze the family heterogeneity characteristic of downward intergenerational support. Using the ordered probit model and cross-sectional data from the China Rural Revitalization Comprehensive Survey (CRRS), which provide information on household income, health conditions, and nutritional caloric intake, this study estimates the relationship between part-time farming and the nutritional health of rural residents. The effects are decomposed into income (measured by dietary diversity scores and food consumption expenditures) and time effects (measured by excess caloric intake), with additional analysis on family heterogeneity concerning downward intergenerational support. Part-time farming positively correlates with rural residents' nutritional health through two pathways: income effect (improved dietary diversity and increased food consumption) and time effect (negative impact of excessive caloric intake). Downward intergenerational support mitigates the negative time effect. This paper highlights the often-overlooked impact of part-time farming on rural nutrition and health, emphasizing non-linear effects and the significant role of downward intergenerational support, thus filling a gap in existing research. [ABSTRACT FROM AUTHOR]

Copper production technology is a complex process consisting of many stages. The combination of pyrometallurgical and hydrometallurgical stages, on the one hand, complicates production while, on the other hand, allowing for a relatively selective separation of intermediate or waste materials that can be subjected to the process of recovery of useful components. Materials of this type are characterised by a much higher copper content relative to the ore material. On the other hand, due to the oxide form, reduction processes are used in which coke is mainly applied. Reduction of the unfavourable phenomenon of CO2 emissions, in this case, can be performed through the use of bioreducers, which are characterised by an inert carbon footprint since the generation of carbon dioxides is the same as its absorption at the stage of vegetation and growth. In this paper, the topic of determining the feasibility of using selected bioreducers, such as peanut shells, to verify their suitability in the process of reducing copper oxides as well as the impact on the working components of the laboratory reactor in which the process is carried out are discussed. In this case, raw materials with a composition similar to the that of slags produced at the copper production stage in a flash furnace were tested for reduction. The results referring to reducing lead and copper contents above 88% Pb and 98% Cu indicate the great potential of this type of bioreducer. An additional advantage is the relatively wide availability of peanut resources. The effects of the copper reduction time on the degree of decopperisation performed with a constant reducer addition at 1300 °C were studied in this paper. Following 1 h of the process, the copper content in the slag was 0.78 wt%, while the longer process duration resulted in a copper fraction of 0.19 wt%. Considering lead, its content was 0.33 wt% after the reduction process. [ABSTRACT FROM AUTHOR]