Search

Supramolecular silicone elastomer is a promising material for sustainable development. Here, quadruple hydrogen bonded ureidopyrimidinone (UPy) units were grafted onto high molecular weight polydimethylsiloxanes (PDMS), providing a novel supramolecular silicone elastomer. The high molecular weight PDMS precursor was prepared through a cyclic trimeric phosphazene base catalyzed ring‐opening polymerization of Octamethylcyclotetrasiloxane (D4) and tetravinyltetramethylcyclotetrasiloxane (V4) with a well‐controlled vinyl content. Its side chains were modified by hydroxyl groups via a thiol‐ene reaction. Then UPy units were further grafted on the side chain of high molecular weight PDMS by the isocyanate‐hydroxy reaction. The mechanical and self‐healing properties of the elastomer can be controlled by adjusting the molecular weight of PDMS and the amount of UPy units. The obtained PDMS elastomers displayed excellent stretchability (elongation at break of 1513%), good self‐healing efficiency (76% at 60°C for 2 h), and high resilience (elastic recovery of 93% under 300% strain cyclic stretching). [ABSTRACT FROM AUTHOR]

Degradable polyester elastomers are highly desirable for biomedical applications. Here, highly transparent and degradable aliphatic polyester elastomers were prepared using the ring‐opening copolymerization (ROCP) of commercial monomers, followed by a photo‐crosslinking process. A series of the semi‐crystalline copolyester (PMBL‐co‐PBL‐co‐PCL) precursors with different molecular weights and pendent vinyl contents were synthesized by one‐pot ROCP of α‐methylene‐γ‐butyrolactone (MBL), ε‐caprolactone (ε‐CL) and γ‐butyrolactone (γ‐BL). Then, UV irradiation was applied to photo‐crosslink the precursors to obtain several elastomers. The obtained aliphatic polyester elastomers (CPEs) displayed excellent mechanical properties with high tensile strength (11.3 MPa), high elongation at break (1300%) and high elastic recovery (about 99% after 10 hysteresis cycles). In addition, the elastomer showed much better stability than uncrosslinked (co)polyesters, but maintained degradability in the basic aqueous solution, with ~30% of the mass loss in 1 M NaOH solution after 30 days. Through efficient ROCP, we demonstrated a strategy to prepare degradable CPEs bearing high strength, good elasticity, excellent resilience and degradation capability, which can serve as sustainable elastomers for various applications. [ABSTRACT FROM AUTHOR]

It is greatly desirable to develop degradable polymers from easily accessible chemicals. In addition to well‐known degradable aliphatic polyesters, poly(ether‐ester) prepared from 1, 4‐dioxan‐2‐one with perfectly alternative ether and ester bonds is a new type of degradable polymer. Due to the low strain of six‐membered 1, 4‐dioxan‐2‐one ring, it remains a challenge to realize the effective and controllable ring‐opening polymerization (ROP) of 1, 4‐dioxan‐2‐one derived monomers despite several catalysts have been attempted. In recent years, the combination of organobase/(thio)urea binary catalytic system has displayed great activity and versatility in the ROP of cyclic esters. Herein, we studied the ROP of 3‐methyl‐1, 4‐dioxan‐2‐one (MDO) using the combinations of various organobases and ureas as catalysts at relatively low temperature. We found that 1, 8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU)/urea pair showed great overall performance in the ROP of MDO, achieving monomer conversion up to 82% within 7 h at −40 °C. Notably, DBU/urea binary catalytic system achieved higher catalytic activity as well as better control over molecular weights and molecular weight distributions compared to previously reported catalysts. The obtained PMDO can completely depolymerize to recover MDO monomer by simple thermolysis, thus established a close‐loop life cycle. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: A series of titanium amido complexes (1‐Ti(NMe2)2 to 4‐Ti(NMe2)2) bearing NNO‐tridentate ligands was synthesized from the reactions of phenoxy‐imine‐amine ligands with one equivalent of Ti(NMe2)4. Subsequently, titanium dichloride complexes (1‐TiCl2 to 4‐TiCl2) were prepared by treatment of titanium amido complexes with excess Me3SiCl in toluene. All metal complexes were characterized by 1H and 13C NMR spectroscopy, and the molecular structures of complexes of 2‐Ti(NMe2)2, 2‐TiCl2, and 4‐TiCl2 in the solid state were determined by single‐crystal X‐ray diffraction. Upon activation with MAO, titanium dichloride complexes as single‐site catalysts were extremely active toward ethylene homopolymerization with great control on molecular weight and distribution. In particular, 3‐TiCl2/MAO exhibited an activity as high as 1.35 × 108 g(PE)·mol−1(Ti)·h−1 at 70°C and produced polyethylene with high molecular weight (41.7 × 104 g∙mol−1) and very narrow distribution (Đ = 1.23). In the presence of 1‐octene as comonomer, linear low‐density polyethylenes (LLDPEs) with ultrahigh molecular weights (Mw = 136—326 × 104 g∙mol−1) and narrow distributions (Đ = 1.20—1.50) were successfully synthesized. [ABSTRACT FROM AUTHOR]

Main observation and conclusion: Substantial progresses have been made toward the development of metal‐free catalysts for stereoselective ring‐opening polymerization (ROP) of rac‐lactide. Yet the discovery of organic catalysts effective at ambient temperature remains a major challenge. Here, the bifunctional H‐bonding catalyst SQ‐1 containing a basic tertiary amine and squaramide motif proved to be good candidate for the stereoselective ROP of rac‐lactide at room temperature, yielding stereoregular polylactide with controlled molecular weights (up to 21.1 kg/mol) and high tacticity (PiESC up to 0.88). Furthermore, binary H‐bonding catalytic system consisting of squaramides (SQ‐2 to SQ‐6) and 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) could efficiently promote the ROP of rac‐lactide at room temperature within short reaction time. Among them, the most bulky squaramide SQ‐2 exhibited the best steroselectivity towards the ROP of rac‐lactide without transesterification side reactions during the polymerization process. The resulting polylactides were proved to have controlled molecular weights as high as 22.2 kg/mol and narrow distributions (1.10—1.24). [ABSTRACT FROM AUTHOR]

A new superbase, the cyclic trimeric phosphazene base (CTPB), was prepared with high yield and purity. In the presence of alcohol, the CTPB serves as a highly efficient organocatalyst for ring-opening polymerization of the 'non-polymerizable' γ-butyrolactone to offer well-defined poly(γ-butyrolactone) with high conversions (up to 98 %) at −60 °C. The produced polymers have high molecular weights (up to 22.9 kg mol−1) and low polydispersity distributions (1.27-1.50). NMR analysis of initiation process and the structural analysis of resulting polymers by MALDI-TOF suggest a mechanism involving an activating initiator which leads only to linear polymers with BnO/H chain ends. [ABSTRACT FROM AUTHOR]

We investigated the ring opening polymerization (ROP) of di- and tri-ethylene glycol monomethyl ether functionalized L-glutamate N-carboxyanhydrides (NCAs) using hexamethyldisilazane (HMDS) as primary initiator and 1,5,7-triazabicyclo-[4.4.0]dec-5-ene (TBD) as co-initiator. The binary initiator system afforded a living ROP for these pegylated NCAs, and a series of homopolypeptides with controlled molecular weight (MW) and low polydispersity were obtained. We then systematically studied the helical content and clouding point (CP) dependence on polypeptide MW using circular dichroism (CD) spectroscopy and turbidity measurements, respectively. We found that the helical content of both homopolypeptides increased with MW, but the triethylene glycol functionalized poly-L-glutamate (poly-L-EGGlu) intended to form more stable α-helical structure than diethylene glycol functionalized counterpart (poly-L-EGGlu) at similar MW. Accordingly, the CP of poly-L-EGGlu with known end group has strong dependence on its helical content, which is essentially determined by MW. Our results suggested that the thermal responsive properties of these unique pegylated poly-L-glutamates not only rely on their chemical structure but also on their secondary structures, which is different from conventional thermal responsive polymers. [ABSTRACT FROM AUTHOR]

Ultrahigh molecular weight polyethylene (UHMWPE) is a class of high-performance engineering plastics, exhibiting a unique set of properties and applications. Although many advances have been achieved in recent years, the synthesis of UHMWPE is still a great challenge. In this contribution, a series of zirconium and hafnium complexes, [2,6-(R1)2-4-R2-C6H2-N-C(camphyl)=C(camphyl)-N-2,6-(R1)2-4-R2-C6H2]MMe2(THF) (1-Zr: R1 = Me, R2 = H, M = Zr; 2-Zr: R1 = Me, R2 = Me, M = Zr; 1-Hf: R1 = Me, R2 = H, M = Hf; 2-Hf: R1 = Me, R2 = Me, M = Hf), bearing bidentate NN ligands with the bulky camphyl backbone were synthesized by the stoichiometric reactions of α-diimine ligands with MMe4 (M = Hf or Zr). All Zr and Hf metal complexes were analyzed using 1H and 13C NMR spectroscopy, and the molecular structures of complexes 1-Zr and 1-Hf were determined by single-crystal X-ray diffraction, revealing that the original α-diimine ligand was selectively reduced into the ene-diamido form and generated an 1,3-diaza-2-metallocyclopentene ring in the metal complexes. Zr complexes 1-Zr and 2-Zr showed moderate activity (up to 388 kg(PE)·mol−1(M)·h−1), poor copolymerization ability, but unprecedented molecular weight capability toward ethylene/1-octene copolymerization. Therefore, copolymers with ultrahigh molecular weights (>600 or 337 × 104 g∙mol−1) were successfully synthesized by 1-Zr or 2-Zr, respectively, with the borate cocatalyst [Ph3C][B(C6F5)4]. Surprisingly, Hf complexes 1-Hf and 2-Hf showed negligible activity under otherwise identical conditions, revealing the great influence of metal centers on catalytic performances. [ABSTRACT FROM AUTHOR]