Search

Harnessing solar energy by photocatalytically converting oxygen and water into high-value-added H2O2 is a promising way of alleviating both environmental and energy issues. It is worth noting that suppressing detrimental side reactions, such as the generation of •O2−, is a critical approach to enhancing H2O2 production. Herein, a 2-fold interpenetrating 3D uranium-organic framework (YTU-W-1) was developed and introduced for photocatalytic H2O2 production. The material demonstrates a different photocatalytic mechanism when employing uranyl as an initiator, as compared with the conventional semiconductor photocatalytic pathway involving photo-generated charge carriers. Benefiting from the strong hydrogen abstraction effect of the U≡O• and the direct one-step oxygen reduction pathway, YTU-W-1 exhibits enhanced photocatalytic performance for H2O2 production with yield efficiency of 221 µmol h−1 g−1. Furthermore, YTU-W-1 displays a high H2O2 selectivity of 68%, confirmed by rotating ring-disk electrode (RRDE) measurement. DFT calculations were used to elucidate the critical role of uranyl in the photocatalytic oxygen reduction reaction for H2O2 production. This research introduces an innovative approach to photo driven H2O2 production, underscoring the potential for heterogeneous catalysts to engage in photocatalytic reactions independently of photo-generated charge carriers. [ABSTRACT FROM AUTHOR]

Metal‐organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post‐synthetic strategies. However, several reported post‐synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation‐induced post‐synthesis, highlighting the merits of convenience, ambient conditions, large‐scale production, and notable time and energy saving. Specifically, a new HKUST‐1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST‐1 with gamma ray under ambient conditions. The copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST‐1, without the use of any additional copper reagents. Significantly, the resulting HKUST‐1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST‐1. [ABSTRACT FROM AUTHOR]

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3−) through ion exchange or hard acid‐hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox‐active cationic polymer network (SCU‐CPN‐6, [C9H10O2N5 ⋅ Cl]n) by merging guanidino groups with ion‐exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU‐CPN‐6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3−. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1+1>2" effect of the two mechanisms. Besides, SCU‐CPN‐6 shows excellent uptake selectivity for IO3− in the presence of high concentrations of SO42−, Cl−, and NO3−. Meanwhile, a high distribution coefficient indicates its exemplary deep‐removal performance for low IO3− concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3− but also establishes a promising avenue for the design of advanced adsorbents for diverse applications. [ABSTRACT FROM AUTHOR]

Metal‐organic framework (MOF) based heterostructures, which exhibit enhanced or unexpected functionality and properties due to synergistic effects, are typically synthesized using post‐synthetic strategies. However, several reported post‐synthetic strategies remain unsatisfactory, considering issues such as damage to the crystallinity of MOFs, presence of impure phases, and high time and energy consumption. In this work, we demonstrate for the first time a novel route for constructing MOF based heterostructures using radiation‐induced post‐synthesis, highlighting the merits of convenience, ambient conditions, large‐scale production, and notable time and energy saving. Specifically, a new HKUST‐1@Cu2O heterostructure was successfully synthesized by simply irradiating a methanol solution dispersed of HKUST‐1 with gamma ray under ambient conditions. The copper source of Cu2O was directly derived from in situ radiation etching and reduction of the parent HKUST‐1, without the use of any additional copper reagents. Significantly, the resulting HKUST‐1@Cu2O heterostructure exhibits remarkable catalytic performance, with a catalytic rate constant nearly two orders of magnitude higher than that of the parent HKUST‐1. [ABSTRACT FROM AUTHOR]

As a critical radioactive anionic contaminant, traditional adsorbents primarily remove iodate (IO3−) through ion exchange or hard acid‐hard base interactions, but suffer from limited affinity and capacity. Herein, employing the synergistic effect of ion exchange and redox, we successfully synthesized a redox‐active cationic polymer network (SCU‐CPN‐6, [C9H10O2N5 ⋅ Cl]n) by merging guanidino groups with ion‐exchange capability and phenolic groups with redox ability via a Schiff base reaction. SCU‐CPN‐6 exhibits a groundbreaking adsorption capacity of 896 mg/g for IO3−. The inferior adsorption capacities of polymeric networks containing only redox (~0 mg/g) or ion exchange (232 mg/g) fragments underscore the synergistic "1+1>2" effect of the two mechanisms. Besides, SCU‐CPN‐6 shows excellent uptake selectivity for IO3− in the presence of high concentrations of SO42−, Cl−, and NO3−. Meanwhile, a high distribution coefficient indicates its exemplary deep‐removal performance for low IO3− concentration. The synergic strategy not only presents a breakthrough solution for the efficient removal of IO3− but also establishes a promising avenue for the design of advanced adsorbents for diverse applications. [ABSTRACT FROM AUTHOR]

In conjunction with theoretical calculations, the in vitro and in vivo uranyl binding capabilities of a bidentate picolinate (Pic) ligand and its pentadentate derivative (H2dpa) are investigated. The planar N3O2-donor configuration of H2dpa matches the typical pentagonal-bipyramid coordination geometry of uranyl, demonstrating a remarkable removal preference for uranyl in the kidneys. [ABSTRACT FROM AUTHOR]

The development of adsorbent materials for effective capture of radioactive iodomethane (CH3I) from the off-gas of used nuclear fuel reprocessing, remains a significant and challenging line of research because currently state-of-art adsorbents still suffer from low binding affinity with CH3I. Here, we proposed a brand-new adsorption topological structure by developing a 2D interdigitated layered framework, named SCU-20, featuring slide-like channel with multiple active sites for CH3I capture. The responsive rotating-adaptive aperture of SCU-20 enables the optimal utilization of all active sites within the pore for highly selective recognition and capture of CH3I. A record-breaking CH3I uptake capacity of 1.84 g/g was achieved under static sorption conditions with saturated CH3I vapor. Both experimental and theoretical findings demonstrated that the exceptional uptake of SCU-20 towards CH3I can be attributed to the confined physical electrostatic adsorption of F sites, coupled with the chemical nitrogen methylation reaction with uncoordinated N atoms of pyrazine. Moreover, dynamic CH3I uptake capacity potentially allows for the capture of CH3I in simulated real-world off gas reprocessing conditions. This study highlights the potential of SCU-20 as a promising candidate for efficient capture of iodine species and contributes to the development of effective solutions for radioactive iodine remediation. [ABSTRACT FROM AUTHOR]

Efficient adsorption of palladium ions from acid nuclear waste solution is crucial for ensuring the safety of vitrification process for radioactive waste. However, the limited stability and selectivity of most current adsorbents hinder their practical applications under strong acid and intense radiation conditions. Herein, to address these limitations, we designed and synthesized an aryl‐ether‐linked covalent organic framework (COF‐316‐DM) grafted dimethylthiocarbamoyl groups on the pore walls. This unique structure endows COF‐316‐DM with high stability and exceptional palladium capture capacity. The robust polyarylether linkage enables COF‐316‐DM to withstand irradiation doses of 200 or 400 kGy of β/γ ray. Furthermore, COF‐316‐DM demonstrates fast adsorption kinetics, high adsorption capacity (147 mg g−1), and excellent reusability in 4 M nitric acid. Moreover, COF‐316‐DM exhibits remarkable selectivity for palladium ions in the presence of 17 interference ions, simulating high level liquid waste scenario. The superior adsorption performance can be attributed to the strong binding affinity between the thioamide groups and Pd2+ ions, as confirmed by the comprehensive analysis of FT‐IR and XPS spectra. Our findings highlight the potential of COFs with robust linkers and tailored functional groups for efficient and selective capture of metal ions, even in harsh environmental conditions. [ABSTRACT FROM AUTHOR]

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X‐ray detection and imaging owing to its high quantum efficiency, short decay time, superior X‐ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X‐ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X‐ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X‐ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator. [ABSTRACT FROM AUTHOR]

Halide perovskites (HPs) recently have emerged as one class of competitive scintillators for X‐ray detection and imaging owing to its high quantum efficiency, short decay time, superior X‐ray absorption capacity, low cost, and ease of crystal growth. The tunable structure and versatile chemical compositions of halide perovskites provide distinguishable advantages over traditional inorganic scintillators for optimizing scintillation performance. Since the first observation of the scintillation phenomenon in HPs, substantial efforts have been devoted to expanding the inventory of HP scintillators and regulating material properties. Understanding the relationship between the structure and scintillation properties of HP scintillators is essential for developing materials with improved X‐ray detection and imaging capacities. This review summarizes strategies for improving the light yield of HP scintillators and provides a roadmap for improving the X‐ray imaging performance. Additionally, methods for controlling the light propagation direction in HP scintillators are highlighted for improving X‐ray imaging resolution. Finally, we highlight the current challenge in HP scintillators and provide a perspective on the future development of this emerging scintillator. [ABSTRACT FROM AUTHOR]

The development of high‐performance X‐ray detectors requires scintillators with fast decay time, high light yield, stability, and X‐ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS4 : 1 % Ce3+ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS4 : 1 % Ce3+ demonstrates a remarkably low detection limit of 43.13 nGyair s−1 and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS4 : 1 % Ce3+ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide‐based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X‐ray imaging capacity of LaCsSiS4 : 1 % Ce3+, we fabricated a flexible X‐ray detector that achieved a high spatial resolution of 8.2 lp mm−1. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high‐performance scintillators. [ABSTRACT FROM AUTHOR]

The development of high‐performance X‐ray detectors requires scintillators with fast decay time, high light yield, stability, and X‐ray absorption capacity, which are difficult to achieve in a single material. Here, we present the first example of a lanthanide chalcogenide of LaCsSiS4 : 1 % Ce3+ that simultaneously integrates multiple desirable properties for an ideal scintillator. LaCsSiS4 : 1 % Ce3+ demonstrates a remarkably low detection limit of 43.13 nGyair s−1 and a high photoluminescence quantum yield of 98.24 %, resulting in a high light yield of 50480±1441 photons/MeV. Notably, LaCsSiS4 : 1 % Ce3+ exhibits a fast decay time of only 29.35±0.16 ns, making it one of the fastest scintillators among all lanthanide‐based inorganic scintillators. Furthermore, this material shows robust radiation and moisture resistance, endowing it with suitability for chemical processing under solution conditions. To demonstrate the X‐ray imaging capacity of LaCsSiS4 : 1 % Ce3+, we fabricated a flexible X‐ray detector that achieved a high spatial resolution of 8.2 lp mm−1. This work highlights the potential of lanthanide chalcogenide as a promising candidate for high‐performance scintillators. [ABSTRACT FROM AUTHOR]

Periodically arranging coordination‐distinct actinides into one crystalline architecture is intriguing but of great synthetic challenge. We report a rare example of a heterobimetallic actinide metal–organic framework (An‐MOF) by a unique reaction‐induced preorganization strategy. A thorium MOF (SCU‐16) with the largest unit cell among all Th‐MOFs was prepared as the precursor, then the uranyl was precisely embedded into the MOF precursor under oxidation condition. Single crystal of the resulting thorium‐uranium MOF (SCU‐16‐U) shows that a uranyl‐specific site was in situ induced by the formate‐to‐carbonate oxidation reaction. The heterobimetallic SCU‐16‐U exhibits multifunction catalysis properties derived from two distinct actinides. The strategy proposed here offers a new avenue to create mixed‐actinide functional material with unique architecture and versatile functionality. [ABSTRACT FROM AUTHOR]

Periodically arranging coordination‐distinct actinides into one crystalline architecture is intriguing but of great synthetic challenge. We report a rare example of a heterobimetallic actinide metal–organic framework (An‐MOF) by a unique reaction‐induced preorganization strategy. A thorium MOF (SCU‐16) with the largest unit cell among all Th‐MOFs was prepared as the precursor, then the uranyl was precisely embedded into the MOF precursor under oxidation condition. Single crystal of the resulting thorium‐uranium MOF (SCU‐16‐U) shows that a uranyl‐specific site was in situ induced by the formate‐to‐carbonate oxidation reaction. The heterobimetallic SCU‐16‐U exhibits multifunction catalysis properties derived from two distinct actinides. The strategy proposed here offers a new avenue to create mixed‐actinide functional material with unique architecture and versatile functionality. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: The second example of tetravalent plutonium carboxyl‐based organic framework, 242Pu(OH)[PO[(C6H4)COO]3]·H2O, termed as PuTPO (TPO = tris(4‐carboxylphenyl)‐phosphineoxide), was reported in this work. A series of characterizations of PuTPO, such as X‐ray crystallography and solid‐state UV‐Vis‐NIR spectroscopy, were carried out to expatiate its structure and physicochemical properties. PuTPO is constructed by dimers of the plutonium‐oxygen subunit of [Pu2O16]. Characteristic peaks located at approximately 1100 nm can be considered to be the fingerprint peaks of tetravalent plutonium. While PuTPO can maintain high crystallinity within several months after synthesis, it exhibits a radiation‐induced swelling effect probed by the expansion of cell parameter of b axis after self‐irradiation from α‐decay of 242Pu. This result enriches the inventory of tetravalent plutonium compounds and provides an insight into the irradiation resistance of metal‐organic frameworks. [ABSTRACT FROM AUTHOR]

Post-synthetic functionalization of covalent organic frameworks (COFs) is an alternative way to enhance and broaden their properties and potential applications. However, the chemical functionalization of COFs is a great challenge because traditional procedures are often time- and energy-consuming, while the crystallinity of COFs can be damaged under harsh conditions. Here we report the in-situ introduction of functional graft chains onto the skeleton of COFs during the synthesis process through the combination of radiation-induced synthesis and graft polymerization techniques under 60Co gamma-ray radiation. The synthesis and functionalization of COFs are simultaneously accomplished in a chemical system under ambient conditions yielding a large number of different functionalized COFs. The obtained carboxyl-functionalized COFs exhibit excellent radioactive uranium removal capabilities from aqueous solution with fast uptake dynamics, high adsorption capacity, and excellent selectivity over other competing metal ions. [ABSTRACT FROM AUTHOR]

Although examples of multiple bonds between actinide elements and main‐group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis‐[M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine‐bridged heterometallic complexes [{U{N(CH3)(CH2CH2NPiPr2)2}(Cl)2[(μ‐Cl)M(COD)]2}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M double dative bonds in these complexes. This study not only enriches the U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements. [ABSTRACT FROM AUTHOR]

Although examples of multiple bonds between actinide elements and main‐group elements are quite common, studies of the multiple bonds between actinide elements and transition metals are extremely rare owing to difficulties associated with their synthesis. Here we report the first example of molecular uranium complexes featuring a cis‐[M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M] core (M=Rh, Ir), which exhibits an unprecedented arrangement of two M→→ ${{\rm{ \mathbin{{\stackrel{\textstyle\rightarrow} { {\smash{\rightarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ U double dative bond linkages to a single U center. These complexes were prepared by the reactions of chlorine‐bridged heterometallic complexes [{U{N(CH3)(CH2CH2NPiPr2)2}(Cl)2[(μ‐Cl)M(COD)]2}] (M=Rh, Ir) with MeMgBr or MeLi, a new method for the construction of species with U−M multiple bonds. Theoretical calculations including dispersion confirmed the presence of two U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M double dative bonds in these complexes. This study not only enriches the U←← ${{\rm{ \mathbin{{\stackrel{\textstyle\leftarrow} { {\smash{\leftarrow}\vphantom{_{\vbox to.5ex{\vss}}}} } }} }}}$ M multiple bond chemistry, but also provides a new opportunity to explore the bonding of actinide elements. [ABSTRACT FROM AUTHOR]

Partitioning of americium from lanthanides (Ln) present in used nuclear fuel plays a key role in the sustainable development of nuclear energy1–3. This task is extremely challenging because thermodynamically stable Am(III) and Ln(III) ions have nearly identical ionic radii and coordination chemistry. Oxidization of Am(III) to Am(VI) produces AmO22+ ions distinct with Ln(III) ions, which has the potential to facilitate separations in principle. However, the rapid reduction of Am(VI) back to Am(III) by radiolysis products and organic reagents required for the traditional separation protocols including solvent and solid extractions hampers practical redox-based separations. Herein, we report a nanoscale polyoxometalate (POM) cluster with a vacancy site compatible with the selective coordination of hexavalent actinides (238U, 237Np, 242Pu and 243Am) over trivalent lanthanides in nitric acid media. To our knowledge, this cluster is the most stable Am(VI) species in aqueous media observed so far. Ultrafiltration-based separation of nanoscale Am(VI)-POM clusters from hydrated lanthanide ions by commercially available, fine-pored membranes enables the development of a once-through americium/lanthanide separation strategy that is highly efficient and rapid, does not involve any organic components and requires minimal energy input.A new strategy to separate radioactive americium from lanthanides based on complexation with polyoxometalates and ultrafiltration technique is highly efficient and rapid, does not involve any organic components and requires minimal energy input. [ABSTRACT FROM AUTHOR]

Efficient removal of iodide (I−) and iodate (IO3−) from aqueous solution is highly desirable for waste disposal and remediation of radioiodine contamination. We report here a bifunctional anion exchange resin Purolite A530E for the effective I−/IO3− adsorption, which shows a priority anion-exchange affinity for I− (99%) over IO3− (9.7%). The maximum adsorption capacity for I− is 275.16 mg·g−1 fitted by the Langmuir isotherm model, much higher than most adsorbents. Furthermore, Purolite A530E exhibits great selectivity for I− over competing anions, which endows the resin with promising I− remediation that over 99% I− can be removed from simulated Hanford groundwater (HGW). [ABSTRACT FROM AUTHOR]

Platinum recovery from waste electrical and electronic equipment (WEEE) in highly acidic solutions is significant to the electronics industry and environmental remediation. However, the lack of ingenious design and synergetic coordination gives rise to unsatisfied PtCl42− extraction capacities and selectivities in most previously reported adsorbents (e.g., polymeric and inorganic materials). Herein, we proposed a synergistic strategy that realizes highly selective PtCl42− uptake through first- and second-sphere coordinations. The proof-of-concept imine-linked covalent organic framework (SCU-COF-3) was found to chelate PtCl42−via the direct N⋯Pt coordination and the synergistically interlaminar N—H⋯Cl hydrogen bonds, which was disclosed by the comprehensive analysis of extended X-ray adsorption fine structure (EXAFS) characterizations and density functional theory (DFT) calculations. The unique adsorption mechanism imparts a superior adsorption capacity (168.4 mg g−1) and extraordinary Pt(II) selectivity to SCU-COF-3 under static conditions. In addition, SCU-COF-3 exhibits an upgraded distribution coefficient of 1.62 × 105 mL g−1, one order of magnitude higher than those of reported natural adsorbents. Specifically, SCU-COF-3 can extract PtCl42− quantitatively from a simulated acidic waste solution coexisting with other 12 competitive ions, suggesting its promising application in practical scenarios. [ABSTRACT FROM AUTHOR]

The exceptional photophysical properties of 3D organic–inorganic lead halide hybrids (OILHs) endow their significant potential for usage in optoelectronics, which has sparked intense research on novel 3D OILHs and associated applications. However, constructing new 3D OILHs based on large organic cations suffers from tough challenges due to the limitation of the Goldschmidt tolerance factor rule, let alone further explorations of their practical applications. Herein, a brand‐new 3D lead chloride hybrid, (1MPZ)Pb4Cl10·H2O (1, 1MPZ = 1‐methylpiperazine) is reported, featuring a dense 3D lead chloride framework made of the corner‐, edge‐, and face‐shared lead chloride polyhedra. 1 presents a broadband white light emission with a large Stokes shift and a nanosecond photoluminescence lifetime, which originates from radiative recombination of self‐trapped excitons (STEs) induced by the highly distorted structure. Such a reabsorption‐free and fast‐decayed STEs emission coupling with the dense 3D architecture further enables 1 with effective X‐ray scintillation with good sensitivity. Impressively, 1 also shows superior environmental and radiation stability. This study provides a new 3D OILH with appealing luminescence, not only expanding the 3D OILH family but also inspiring the exploitation of their optoelectronic applications. [ABSTRACT FROM AUTHOR]

The Haber–Bosch process produces ammonia (NH3) from dinitrogen (N2) and dihydrogen (H2), but requires high temperature and pressure. Before iron-based catalysts were exploited in the current industrial Haber–Bosch process, uranium-based materials served as effective catalysts for production of NH3 from N2. Although some molecular uranium complexes are known to be capable of combining with N2, further hydrogenation with H2 forming NH3 has not been reported to date. Here, we describe the first example of N2 cleavage and hydrogenation with H2 to NH3 with a molecular uranium complex. The N2 cleavage product contains three uranium centers that are bridged by three imido μ 2-NH ligands and one nitrido μ 3-N ligand. Labeling experiments with 15N demonstrate that the nitrido ligand in the product originates from N2. Reaction of the N2-cleaved complex with H2 or H+ forms NH3 under mild conditions. A synthetic cycle has been established by the reaction of the N2-cleaved complex with trimethylsilyl chloride. The isolation of this trinuclear imido-nitrido product implies that a multi-metallic uranium assembly plays an important role in the activation of N2. [ABSTRACT FROM AUTHOR]

In the past decade, the area of solid state chemistry of actinides has witnessed a rapid development in China, based on the significantly increased proportion of the number of actinide containing crystal structures reported by Chinese researchers from only 2% in 2010 to 36% in 2021. In this review article, we comprehensively overview the synthesis, structure, and characterizations of representative actinide solid compounds including oxo-compounds, organometallic compounds, and endohedral metallofullerenes reported by Chinese researchers. In addition, Chinese researchers pioneered several potential applications of actinide solid compounds in terms of adsorption, separation, photoelectric materials, and photo-catalysis, which are also briefly discussed. It is our hope that this contribution not only calls for further development of this area in China, but also arouses new research directions and interests in actinide chemistry and material sciences. [ABSTRACT FROM AUTHOR]

A rare case of semiconducting actinide-based metal–organic framework SCU-125 was designed and synthesized. As a result of the lack of two coordination sites in the plane of the tetrathiafulvalene tetrabenzoate (TTFTB) molecule, a defective kgd network was formed. The electrical conductivity of SCU-125 was measured to be 2.2(2) × 10−7 S cm−1 at 25 °C ± 2 °C. [ABSTRACT FROM AUTHOR]

Metal organic frameworks (MOFs) are a distinct family of crystalline porous materials finding extensive applications. Their synthesis often requires elevated temperature and relatively long reaction time. We report here the first case of MOF synthesis activated by high‐energy (1.5 MeV) electron beam radiation from a commercially available electron‐accelerator. Using ZIF‐8 as a representative for demonstration, this type of synthesis can be accomplished under ambient conditions within minutes, leading to energy consumption about two orders of magnitude lower than that of the solvothermal condition. Interestingly, by controlling the absorbed dose in the synthesis, the electron beam not only activates the formation reaction of ZIF‐8, but also partially etches the material during the synthesis affording a hierarchical pore architecture and highly crystalline ZnO nanoparticles on the surface of ZIF‐8. This gives rise to a new strategy to obtain MOF@metal oxide heterostructures, finding utilities in photocatalytic degradation of organic dyes. [ABSTRACT FROM AUTHOR]

Metal organic frameworks (MOFs) are a distinct family of crystalline porous materials finding extensive applications. Their synthesis often requires elevated temperature and relatively long reaction time. We report here the first case of MOF synthesis activated by high‐energy (1.5 MeV) electron beam radiation from a commercially available electron‐accelerator. Using ZIF‐8 as a representative for demonstration, this type of synthesis can be accomplished under ambient conditions within minutes, leading to energy consumption about two orders of magnitude lower than that of the solvothermal condition. Interestingly, by controlling the absorbed dose in the synthesis, the electron beam not only activates the formation reaction of ZIF‐8, but also partially etches the material during the synthesis affording a hierarchical pore architecture and highly crystalline ZnO nanoparticles on the surface of ZIF‐8. This gives rise to a new strategy to obtain MOF@metal oxide heterostructures, finding utilities in photocatalytic degradation of organic dyes. [ABSTRACT FROM AUTHOR]

A three-dimensional microporous thorium-based metal–organic framework (Th-BPYDC-I) that features a suitable pore size for Xe was prepared. The pore confinement effect enables high Xe uptake (2.15 mmol g−1) and good Xe/Kr selectivity (7.49). This work highlights the critical role of the size-matching rule in noble gas separation and provides an alternative option for Xe/Kr separation. [ABSTRACT FROM AUTHOR]

A novel 3D potassium-containing zirconium fluorophosphonate K2Zr[CH2(PO3)2]F2 (SZ-8) was successfully synthesized as single crystals via a solvothermal method using a mixture of nitric acid and potassium nitrate as mineralizers. SZ-8 can adsorb 110.6 and 57 mg g−1 of Eu3+ in pH 2 and pH 1 solutions respectively, highlighting its potential remediation for radionuclides with high charges. SZ-8 not only possesses superior Eu3+ removal capacity under strongly acidic conditions, but also provides a universal synthesis strategy for crystalline zirconium phosphonates with inorganic counterions. [ABSTRACT FROM AUTHOR]

A novel polymorph of ThB2O5, denoted as β-ThB2O5, was synthesised under high-temperature high-pressure (HT/HP) conditions. Via single crystal X-ray diffraction measurements, β-ThB2O5 was found to form a three-dimensional (3D) framework structure where thorium atoms are ten-fold oxygen coordinated forming tetra-capped trigonal prisms. The only other known polymorph of ThB2O5, denoted α, synthesised herein using a known borax, B2O3–Na2B4O7, high temperature solid method, was found to transform to the β polymorph when exposed to conditions of 4 GPa and ∼900 °C. Compared to the α polymorph, β-ThB2O5 has smaller molar volume by approximately 12%. Exposing a mixture of the α and β polymorphs to HT/HP conditions ex situ further demonstrated the preferred higher-pressure phase being β, with no α phase material being observed via Rietveld refinements against laboratory X-ray powder diffraction (PXRD) measurements. In situ heating PXRD measurements on α-ThB2O5 from RT to 1030 °C indicated that α-ThB2O5 transforms to the β variant at approximately 900 °C via a 1st order mechanism. β-ThB2O5 was found to exist only over a narrow temperature range, decomposing above 1050 °C. Ab initio calculations using density functional theory (DFT) with the Hubbard U parameter indicated, consistent with experimental observations, that β is both the preferred phase at higher temperatures and high pressures. Interestingly, it was found by switching from B2O3–Na2B4O7 to H3BO3–Li2CO3 flux using consistent high temperature solid state conditions for the synthesis of the α variant, β-ThB2O5 could be generated. Comparison of their single crystal measurements showed this was identical to that obtained from HT/HP conditions. [ABSTRACT FROM AUTHOR]

With the extensive usage of gadolinium-based contrast agents (GBCAs) in magnetic resonance imaging (MRI), gadolinium deposition has been observed in the brain, kidneys, liver, etc., and this is also closely related to the development of nephrogenic systemic fibrosis (NSF) in patients with renal dysfunction. Chelation, thereby promoting the elimination of deposited Gd(III), seems to be promising for alleviating these problems. Despite many ligands suitable for chelation therapy having been studied, the decorporation of transition metals (e.g. iron, copper, lead, etc.) and actinides (e.g. uranium, plutonium, etc.) has long been a primary concern, whereas the study of Gd(III) has been extremely limited. Due to their excellent metal binding abilities in vivo and therapeutic effects toward neurodegenerative diseases, bidentate hydroxypyridinone ligands are expected to be able to remove Gd(III) from the brain, kidneys, bones, and liver. Herein, the Gd(III) decorporation efficacy of a bidentate hydroxypyridinone ligand (Me-3,2-HOPO) has been evaluated. The complexation behavior between Me-3,2-HOPO and Gd(III) in solution and solid states was characterized with the assistance of potentiometric titration and X-ray diffraction techniques, respectively. Solution-based thermodynamic studies illustrate that the dominant species of complex between Gd(III) and Me-3,2-HOPO (HL) is GdL2+ (log β120 = 11.8 (3)) at pH 7.4. The structure of the Gd–Me-3,2-HOPO crystal obtained from a room temperature reaction reveals the formation of a Gd(III) dimer that is chelated by four ligands as a result of metal ion hydration and ligand complexation. Cellular Gd(III) removal assays illustrate that Me-3,2-HOPO could effectively reduce final amounts of gadolinium by 77.6% and 66.1% from rat renal proximal tubular epithelial (NRK-52E) cells and alpha mouse liver 12 (AML-12) cells, respectively. Our current results suggest the potential of bidentate HOPO ligands as an effective approach to treat patients suffering from Gd(III) toxicity. [ABSTRACT FROM AUTHOR]

Scintillators display radioluminescent properties when irradiated by high‐energy photons and therefore play an essential role in radiation detection. The current inventory of scintillators is overwhelmingly represented by achiral structures, where the radioluminescence propagates isotropically after generation. Herein, we demonstrate that chiral perovskites of (R‐3AP)PbBr3Cl⋅H2O (R‐3APP) and (S‐3AP)PbBr3Cl⋅H2O (S‐3APP) emerge as a new type of scintillator displaying a distinct property of circularly polarized radioluminescence (CPRL). A high quantum yield of 27.6 %, high luminescence dissymmetric factors (glum) of 4×10−2, and high X‐ray absorption coefficients were observed for these compounds. As proof of concept, we fabricated a polarized scintillator pair by assembling chiral scintillator crystals, which provides a new strategy to attenuate optical crosstalk between the scintillators by precisely controlling the radioluminescence propagation and improves the X‐ray imaging quality at the boundary region. [ABSTRACT FROM AUTHOR]

Scintillators display radioluminescent properties when irradiated by high‐energy photons and therefore play an essential role in radiation detection. The current inventory of scintillators is overwhelmingly represented by achiral structures, where the radioluminescence propagates isotropically after generation. Herein, we demonstrate that chiral perovskites of (R‐3AP)PbBr3Cl⋅H2O (R‐3APP) and (S‐3AP)PbBr3Cl⋅H2O (S‐3APP) emerge as a new type of scintillator displaying a distinct property of circularly polarized radioluminescence (CPRL). A high quantum yield of 27.6 %, high luminescence dissymmetric factors (glum) of 4×10−2, and high X‐ray absorption coefficients were observed for these compounds. As proof of concept, we fabricated a polarized scintillator pair by assembling chiral scintillator crystals, which provides a new strategy to attenuate optical crosstalk between the scintillators by precisely controlling the radioluminescence propagation and improves the X‐ray imaging quality at the boundary region. [ABSTRACT FROM AUTHOR]

Multi‐level memory can greatly improve information density, so it has been widely studied. In this study, a carbazole‐based donor–acceptor polymer poly[2,7‐9‐(heptadecan‐9‐yl)‐9H‐carbazole‐alt‐7H‐benzimidazo[2,1‐a]benz[de]isoquinolin‐7‐one] (PCz‐BB) is synthesized, which exhibits flash‐type ternary memory behavior. Further, CdS nanoparticles (NPs) are embedded into the prepared polymer to enhance the storage performance. The current–voltage (I–V) characteristics of memory devices based on PCz‐BB:CdS composites and the effect of the embedding ratio of CdS NPs on the memory devices are studied. It is verified that the ON2/ON1/OFF current ratios of the devices at low CdS embedding concentrations are improved, and the threshold voltages are also reduced. The memory device based on the optimal embedding concentration (3 wt% CdS) exhibits a high ON2/ON1/OFF current ratio of 18631:72:1, a low threshold voltage of −0.40/−1.20 V, and excellent stability. The mechanism of resistive switching is explained by the theory of charge traps and conductive filaments. This work provides a new avenue for high‐performance multi‐level organic electrical storage materials. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: The environmental contamination of uranium will occur in scenarios such as nuclear accidents and leakage from nuclear waste storage sites, which eventually leads to the internal uranium exposure of people, causing consequential injuries of renal failure, osteosarcoma, etc. The development of uranyl specific chelating agents that could sequester uranium in vivo is in urgent need and is important for the safe and efficient development of nuclear industry. Metal organic frameworks (MOFs) already serve as efficient uranium depletion materials in solutions of a wide range of pH and ionic strength for nuclear fuel recycling, uranium extraction from seawater, as well as environmental decontamination. Herein, a chromium‐based nano‐metal organic framework (nano‐MOF) functionalized interiorly with 3,2‐HOPO ligands, MIL‐101‐HOPO, is rationally synthesized. In vitro adsorption experiments show that MIL‐101‐HOPO exhibits high adsorption selectivity and fast adsorption kinetics for uranyl. The results of in vivo uranyl decorporation assays reveal that MIL‐101‐HOPO with the decoration of HOPO ligands on the interior wall exhibits significantly increased uranyl removal ratio in kidneys comparing to the pristine nMOFs, and is more effective than the clinically used ZnNa3‐DTPA. All those results corroborate the interior functionalization of MOFs as an efficient strategy to develop promising uranyl decorporation agents. [ABSTRACT FROM AUTHOR]

Radiation protective materials are widely applied to avoid occupational hazards from either particle emissions or high-energy electromagnetic waves. Herein, we present a boron imidazolate framework (BIF) as a novel neutron shielding additive with high neutron capture cross-section elements B/Li and H. The BIF1-based epoxy resin matrix (Ep-BIF1) possesses high thermal stability and excellent resistance capacity. The neutron radiation shielding property was characterized using an Am–Be source, in which the thermal neutron shielding efficiency of Ep-BIF1 is notably higher than that of Ep-B4C with equal boron concentration, showing potential applications as an advanced efficient neutron radiation shielding composite. [ABSTRACT FROM AUTHOR]

Uranium nitrides play important roles in dinitrogen activation and functionalization and in chemistry for nuclear fuels, but the synthesis and isolation of the highly reactive uranium(VI) nitrides remains challenging. Here, we report an example of transition metal (TM) stabilized U(VI) nitride complexes, which are generated by the photolysis of azide-bridged U(IV)-TM (TM = Rh, Ir) precursors. The U(V) nitride intermediates with bridged azide ligands are isolated successfully by careful control of the irradiation time, suggesting that the photolysis of azide-bridged U(IV)-TM precursors is a stepwise process. The presence of two U(VI) nitrides stabilized by three TMs is clearly demonstrated by an X-ray crystallographic study. These TM stabilized U(V) nitride intermediates and U(VI) nitride products exhibit excellent stability both in the solid-state and in THF solution under ambient light. Density functional theory calculations show that the photolysis necessary to break the N-N bond of the azide ligands implies excitation from uranium f-orbital to the lowest unoccupied molecular orbital (LUMO), as suggested by the strong antibonding N-(N2) character present in the latter. The synthesis and isolation of uranium(VI) nitride complexes remains challenging. Here, the authors report an example of transition metal (TM) stabilized U(VI) nitride complexes, generated via photolysis of azide-bridged U(IV)-TM precursors. [ABSTRACT FROM AUTHOR]

A highly crystalline one-dimensional zirconium phosphate, (NH4)2[ZrF(PO4)(HPO4)] (ZrP-3), was facilely synthesized by the ionothermal method. The robust structure and rich hydrogen-bonded network make ZrP-3 an excellent proton conductor by having a proton conductivity higher than 10−2 S cm−1 at 90 °C and 95% RH. The remarkable stability makes ZrP-3 a promising solid electrolyte material for proton exchange membrane fuel cells. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: We reported the synthesis, single crystal structure, and solid‐state UV‐Vis‐NIR spectroscopy of a new transplutonium metal‐organic framework (MOFs), Am(H2O)[PO[(C6H4)COO]3], denoted as AmTPO (TPO = tris(4‐carboxylphenyl)‐phosphineoxide). AmTPO forms a three‐dimensional metal−organic framework structure with americium dimers as the secondary building unit. Clear 5f → 5f transitions attributed to trivalent americium was observed in the absorption spectrum of AmTPO ranging from 300 to 1200 nm. Notably, AmTPO can maintain the crystallinity with no observable structural degradation within several months after being synthesized, revealing a long‐term radiation resistance of this structure and the potential application of MOFs as a platform for nuclear waste disposal. [ABSTRACT FROM AUTHOR]

Open metal site (OMS) seated in a luminescent lanthanide (Ln) metal center offers an opportunity for rationally tuning the spectroscopic behavior of lanthanide-organic frameworks aiming for a wide range of sensing applications. However, given the spherical nature of common coordination geometries of trivalent lanthanides and the generally strong Ln-O bonds, the lanthanide based OMS is rarely reported and difficult to be functionalized. We report here a unique europium-organic framework containing abundant quasi-OMS that is protected by an abnormal weak Eu-O bond. These quasi-OMSs offer reversible direct binding sites for water molecules probed by X-ray crystallography, leading to sensitive, visible, and ratiometric luminescent sensing toward humidity and water content in organic solvents. The specific recognition of water based on quasi-luminescent-OMSs gives rise to a superior water detection limit down to 0.0003% v/v, which is one order of magnitude lower than that of Karl Fischer method. [ABSTRACT FROM AUTHOR]

Luminescent covalent organic frameworks (COFs) find promising applications in chemical sensing, photocatalysis, and optoelectronic devices, however, the majority of COFs are non or weakly emissive owing to the aggregation‐caused quenching (ACQ) or the molecular thermal motion‐based energy dissipation. Here, we report a previously unperceived approach to improve luminescence performance of COFs by introducing isotope effect, which is achieved through substitution of hydrogen from high‐frequency oscillators X‐H (X=O, N, C) by heavier isotope deuterium. Combining the "bottom‐up" and in situ deuteration methods generates the first deuterated COF, which exhibits an impressively 19‐fold enhancement in quantum yield over that of the non‐deuterated counterpart. These results are interpreted by theoretical calculations as the consequence of slower C/N‐D and OD⋅⋅⋅O vibrations that impede the nonradiative deactivation process. The proposed strategy is proved applicable to many other types of emissive COFs. [ABSTRACT FROM AUTHOR]

Luminescent covalent organic frameworks (COFs) find promising applications in chemical sensing, photocatalysis, and optoelectronic devices, however, the majority of COFs are non or weakly emissive owing to the aggregation‐caused quenching (ACQ) or the molecular thermal motion‐based energy dissipation. Here, we report a previously unperceived approach to improve luminescence performance of COFs by introducing isotope effect, which is achieved through substitution of hydrogen from high‐frequency oscillators X‐H (X=O, N, C) by heavier isotope deuterium. Combining the "bottom‐up" and in situ deuteration methods generates the first deuterated COF, which exhibits an impressively 19‐fold enhancement in quantum yield over that of the non‐deuterated counterpart. These results are interpreted by theoretical calculations as the consequence of slower C/N‐D and OD⋅⋅⋅O vibrations that impede the nonradiative deactivation process. The proposed strategy is proved applicable to many other types of emissive COFs. [ABSTRACT FROM AUTHOR]

Halide hybrid perovskites are attracting considerable attention as highly promising candidates for directly sensing X‐ray radiation, but it is challenging to realize passive X‐ray detection without an external power supply. However, the bulk photovoltaic effect (BPVE) in ferroelectrics promotes the independent separation of photoexcited carriers. Herein, by dimensionality reconstruction of a pure‐two‐dimensional (P‐2D) monolayered perovskite (CH3OC3H9N)2PbBr4, we obtained a quasi‐two‐dimensional (Q‐2D) ferroelectric (CH3OC3H9N)2CsPb2Br7. Converting P‐2D into Q‐2D perovskite stimulates a significant BPVE associated with robust ferroelectricity, as well as an enhanced mobility lifetime product. These features show the potential of the first passive X‐ray detector based on ferroelectrics with an impressive sensitivity up to 410 μC Gy−1 cm−2 at zero bias, which is even superior to the value of the state‐of‐the‐art α‐Se detector operated at relatively high bias. [ABSTRACT FROM AUTHOR]

Halide hybrid perovskites are attracting considerable attention as highly promising candidates for directly sensing X‐ray radiation, but it is challenging to realize passive X‐ray detection without an external power supply. However, the bulk photovoltaic effect (BPVE) in ferroelectrics promotes the independent separation of photoexcited carriers. Herein, by dimensionality reconstruction of a pure‐two‐dimensional (P‐2D) monolayered perovskite (CH3OC3H9N)2PbBr4, we obtained a quasi‐two‐dimensional (Q‐2D) ferroelectric (CH3OC3H9N)2CsPb2Br7. Converting P‐2D into Q‐2D perovskite stimulates a significant BPVE associated with robust ferroelectricity, as well as an enhanced mobility lifetime product. These features show the potential of the first passive X‐ray detector based on ferroelectrics with an impressive sensitivity up to 410 μC Gy−1 cm−2 at zero bias, which is even superior to the value of the state‐of‐the‐art α‐Se detector operated at relatively high bias. [ABSTRACT FROM AUTHOR]

Low‐valent uranium‐element multiple bond complexes remain scarce, though there is burgeoning interest regarding to their bonding and reactivity. Herein, isolation of a uranium(III)‐carbon double bond complex [(Cp*)2U(CDP)](BPh4) (1) comprising a tridentate carbodiphosphorane (CDP) was reported for the first time. Oxidation of 1 afforded the corresponding U(IV) complex [(Cp*)2U(CDP)](BPh4)2 (2). The distance between U and C in 2 is 2.481 Å, indicating the existence of a typical U=C double bond, which is further confirmed by quantum chemical calculations. Bonding analysis suggested that the CDP also serves as both σ‐ and π‐donor in complex 1, though a longer U−C bond (2.666(3) Å) is observed. It implies that 1 is the first isolable mononuclear uranium(III) carbene complex. Moreover, these results suggest that CDPs are promising ligands to establish other low‐valent f‐block metal‐carbon multiple bond complexes. [ABSTRACT FROM AUTHOR]

99Tc is a long-lived radionuclide present in large amounts as TcO4- anion in used nuclear fuel. Its removal from the waste stream is highly desirable because of its interference capability with actinide separation and its volatile nature during the nuclear waste vitrification process. Despite the progress achieved in the past few years, the design of anion-exchange materials with optimized Tc uptake property and improved stability under the extreme condition, is still a research goal beneficial for reducing the volume of secondary radioactive solid waste generated during the waste partitioning process. However, their design philosophy remains elusive, with challenges coming from charge repulsion, steric hindrance, and insufficient reactive sites within the materials. Herein, we present a design philosophy of cationic polymer network materials for TcO4- separation by systematic precursor screening and structure prediction. This affords an optimized material, SCU-CPN-2 (SCU=Soochow University), with extremely high positive charge density while maintaining high radiation resistance. SCU-CPN-2 exhibits a record high adsorption capacity (1,467 mg/g towards the surrogate ReO4-) compared to all anion-exchange materials reported up to date. In addition to ultrafast adsorption kinetics, SCU-CPN-2 has remarkable selectivity over nitrate and sulfate, and facile recyclability. [ABSTRACT FROM AUTHOR]

Zeolites are a well‐known family of microporous aluminosilicate crystals with a wide range of applications. Their industrial synthetic method under hydrothermal condition requires elevated temperature and long crystallization time and is therefore quite energy‐consuming. Herein, we utilize high‐energy electron beam irradiation generated by an industrial accelerator as a distinct type of energy source to activate the formation reaction of Na‐A zeolite. The initial efforts afford an attractive reaction process that can be achieved under ambient conditions and completed within minutes with almost quantitative yield, leading to notable energy saving of one order of magnitude compared to the hydrothermal reaction. More importantly, electron beam irradiation simultaneously exhibits an etching effect during the formation of zeolite generating a series of crystal defects and additional pore windows that can be controlled by irradiation dose. These observations give rise to significantly enhanced surface area and heavy metal removal capabilities in comparison with Na‐A zeolite synthesized hydrothermally. Finally, we show that this method can be applied to many other types of zeolites. [ABSTRACT FROM AUTHOR]

Zeolites are a well‐known family of microporous aluminosilicate crystals with a wide range of applications. Their industrial synthetic method under hydrothermal condition requires elevated temperature and long crystallization time and is therefore quite energy‐consuming. Herein, we utilize high‐energy electron beam irradiation generated by an industrial accelerator as a distinct type of energy source to activate the formation reaction of Na‐A zeolite. The initial efforts afford an attractive reaction process that can be achieved under ambient conditions and completed within minutes with almost quantitative yield, leading to notable energy saving of one order of magnitude compared to the hydrothermal reaction. More importantly, electron beam irradiation simultaneously exhibits an etching effect during the formation of zeolite generating a series of crystal defects and additional pore windows that can be controlled by irradiation dose. These observations give rise to significantly enhanced surface area and heavy metal removal capabilities in comparison with Na‐A zeolite synthesized hydrothermally. Finally, we show that this method can be applied to many other types of zeolites. [ABSTRACT FROM AUTHOR]