Search

This paper focuses on determining the effects of short-circuit current values on the operation of high-voltage substations. The analyses performed focused on the dynamic and thermal effects on the short-circuit current for different input data configurations. The analyses of the dynamic effects of short-circuit current were performed in two ways. First, calculations were executed using the procedures contained in "IEC 60865-1:2012 Short-circuit currents, calculations of the effects of short-circuit currents. Part 1: Definitions and calculation methods". Analytic calculations were accomplished for different values of the initial three-phase short-circuit current, the type of short circuit, the static tension force of the conductors, the stiffness of the structure and the methods of attaching the lashing chains. Secondly, the same analysis was performed using PRIMTECH 3D software. The connections were modeled in computer software, for which the calculations were implemented according to normative recommendations. After obtaining the results, an analysis was performed using the model based on the input data. Performing the analysis in two ways made it possible to compare the results with each other and develop conclusions. An analysis of the thermal effects of the short-circuit current was also provided. The results of the calculations showed that the choice of conductor cross sections according to the value of the initial short-circuit current was correct. Particular attention has been paid to rigid conductors and flexible conductors, which are directly affected by the short circuit and have an impact on the selection of the complete equipment for the high-voltage switchgear. [ABSTRACT FROM AUTHOR]

This work aimed to develop a parameterized, two-dimensional field model of a switched reluctance motor (SRM). The main task of the developed model was to calculate the value of the electromagnetic torque for various positions of the rotor. Based on these calculations, the characteristics of the electromagnetic torque were determined depending on the position of the rotor angle φ for the current function I (T = f (φ, I)). Using the model, it was possible to additionally observe the phenomena occurring in the motor winding, e.g., distributions, isolines of magnetic potential, induction, and to calculate the values of the temperature. The parameterized structural elements that made up the entire model can be freely changed and, thus, the results for various structures can be obtained. Thanks to this, it was possible to evaluate and compare motor of different designs. To validate the model, measurements were conducted on real-scale reluctance motors, and families of electromagnetic torque characteristics were obtained for various design cases. The results received from the tested motors were juxtaposed with simulation results procured via the model. Based on this comparison, it was possible to determine the accuracy of the model's operation. [ABSTRACT FROM AUTHOR]

The aim of this work was to develop a parameterized analytical and FEM (Finite Element Method) model of a switched reluctance motor. The developed analytical model was used to assess the performance of these types of motors, and is determined to be a tool for comparing and evaluating switched reluctance motors of various designs. The aim of the work was also the systematization of knowledge related to the operation, structure and methods of determining the static electromagnetic torque generated by switched reluctance motors. The FEM model (ANSYS) was, also, made in order to verify physical phenomena occurring during operation of these motors. Four laboratory tests were executed as part of the work prototypes of switched reluctance motors built at Warsaw University of Technology. A parameterized analytical model was developed and implemented in MATLAB. The model operation tests were conducted and as a result, the characteristics describing the dependence of the electromagnetic torque as a function of the current and the position of the rotor were obtained. The model was validated by confronting the analytical calculations supported by FEM simulation results with the measurement results. The usefulness of the results obtained with the use of the procured models was assessed. [ABSTRACT FROM AUTHOR]