Search

The interaction of carbon-based nanomaterials and ionic liquids (ILs) has been thoroughly exploited for diverse electroanalytical solutions since the first report in 2003. This combination, either through covalent or non-covalent functionalization, takes advantage of the unique characteristics inherent to each material, resulting in synergistic effects that are conferred to the electrochemical (bio)sensing system. From one side, carbon nanomaterials offer miniaturization capacity with enhanced electron transfer rates at a reduced cost, whereas from the other side, ILs contribute as ecological dispersing media for the nanostructures, improving conductivity and biocompatibility. The present review focuses on the use of this interesting type of nanocomposites for the development of (bio)sensors specifically for pharmaceutical detection, with emphasis on the analytical (bio)sensing features. The literature search displayed the conjugation of more than 20 different ILs and several carbon nanomaterials (MWCNT, SWCNT, graphene, carbon nanofibers, fullerene, and carbon quantum dots, among others) that were applied for a large set (about 60) of pharmaceutical compounds. This great variability causes a straightforward comparison between sensors to be a challenging task. Undoubtedly, electrochemical sensors based on the conjugation of carbon nanomaterials with ILs can potentially be established as sustainable analytical tools and viable alternatives to more traditional methods, especially concerning in situ environmental analysis. [ABSTRACT FROM AUTHOR]

The water influence on electrochemical behaviour of Ag+ ions in urea and choline chloride mixture was investigated by cyclic voltammetry technique, while the molecular insights about the investigated systems were obtained from molecular dynamic (MD) simulation. The water content was variated from 0 up to 10% (v/v). Cyclic voltammetry technique showed that the peak potential for Ag+/Ag redox couples shifted in direction to more positive potentials with the gradual increase of water content in solution, indicating that the addition of water electrocatalyses the kinetics of the reduction of Ag+ ions. The MD simulations demonstrated that water molecules do not interact strongly with Ag+ ions but induce a small reduction in the number of urea molecules around of the ion and that the water molecules adjust to free spaces in the mixture. [ABSTRACT FROM AUTHOR]

Boron‐doped diamond (BDD) electrodes possess outstanding physical, chemical, and electronic properties and have been successfully, yet in a limited way, explored in the electroanalysis of substances with therapeutic action (analgesics, antipyretics, antibiotics, anti‐inflammatories, antihypertensives, antidepressants, vitamins, and others) in diverse milieus (pharmaceutical formulations, urine, serum, whole blood, surface waters, seawaters, groundwater, wastewaters, etc.). Therefore, in this Review, a broad overview of the available scientific information on recent progress and achievements of the application of bare or modified BDD electrodes to the bioanalytical and environmental detection of pharmaceutical compounds is presented. The main parameters, for example boron concentration, applied operational conditions during pretreatment, chemical and physical structure, and other influential factors on the electroanalytical BDD electrodes performance, are discussed. [ABSTRACT FROM AUTHOR]

A novel platform for carbamate-based pesticide quantification using a chitosan/magnetic iron oxide (Chit-Fe3O4) nanocomposite as a glassy carbon electrode (GCE) modifier is shown for an analytical methodology for determination of bendiocarb (BND). The BND oxidation signal using GCE/Chit-Fe3O4 compared with bare GCE was catalyzed, showing a 37.5% of current increase with the peak potential towards less positive values, showing method’s increased sensitivity and selectivity. Using square-wave voltammetry (SWV), calibration curves for BND determination were obtained (n = 3), and calculated detection and quantification limits values were 2.09 × 10−6 mol L−1 (466.99 ppb) and 6.97 × 10−6 mol L−1 (1555.91 ppb), respectively. The proposed electroanalytical methodology was successfully applied for BND quantification in natural raw waters without any sample pretreatment, proving that the GCE/Chit-Fe3O4 modified electrode showed great potential for BND determination in complex samples.ᅟGraphical abstract [ABSTRACT FROM AUTHOR]

This work describes the electroanalytical determination of Chlorpyriphos pesticide in natural waters using hanging mercury drop electrode allied to square wave adsorptive cathodic stripping voltammetry. The best responses were obtained in Britton‒Robinson buffer solutions at pH 2.0, using a frequency of 100 s-1, a scan increment of 5 mV, a square wave amplitude of 25 mV and an accumulation potential of-0.4 V during 60 s. Therefore, voltammetric responses showed the presence of one well-defined and irreversible reduction peak, at-1.08 V vs. Ag/AgCl/KCl 1.0 M, which involves two electrons in the reduction of carbon‒nitrogen bond in the N-heterocyclic system with the participation of protonation equilibrium preceding the electron transfer reaction. Analytical curves were constructed and compared to similar curves performed by gas chromatograph coupled to a selective nitrogen‒phosphorus detector, which demonstrates that the proposed methodology is suitable for determining contamination by Chlorpyriphos in complex samples. [ABSTRACT FROM AUTHOR]

The effect of water on the physicochemical properties of an ethylene glycol and choline chloride mixture containing Cu2+ ions was investigated by electrochemical techniques and molecular dynamics simulation. The experiments and computational calculations were carried out by increasing the water content from 0 up to 10% (v/v). The cyclic voltammetry and chronopotentiometry techniques showed that the diffusion coefficient of Cu2+ ions increased and that the peak potentials for both the Cu2+/Cu+ and Cu+/Cu redox couples shifted towards more positive potentials with the increase in the water content in the solution. The molecular dynamics simulation indicated that the water molecules replaced the ethylene glycol molecules that were coordinated with Cu2+ ions, while the interactions between Cu2+ and Cl− ions were not influenced by the presence of water. [ABSTRACT FROM AUTHOR]

The low toxicity and environmentally compatible ionic liquids (ILs) are alternatives to the toxic and harmful cyanide-based baths used in industrial silver electrodeposition. Here, we report the successful galvanostatic electrodeposition of silver films using the air and water stable ILs 1-ethyl-3-methylimidazolium trifluoromethylsulfonate ([EMIM]TfO) and 1-H-3-methylimidazolium hydrogen sulphate ([HMIM+][HSO4−]) as solvents and AgTfO as the source of silver. The electrochemical deposition parameters were thoughtfully studied by cyclic voltammetry before deposition. The electrodeposits were characterized by scanning electron microscopy coupled with X-ray energy dispersive spectroscopy and X-ray diffraction. Molecular dynamics (MD) simulations were used to investigate the structural dynamic and energetic properties of AgTfO in both ILs. Cyclic voltammetry experiments revealed that the reduction of silver is a diffusion-controlled process. The morphology of the silver coatings obtained in [EMIM]TfO is independent of the applied current density, resulting in nodular electrodeposits grouped as crystalline clusters. However, the current density significantly influences the morphology of silver electrodeposits obtained in [HMIM+][HSO4−], thus evolving from dendrites at 15 mA cm−2 to the coexistence of dendrites and columnar shapes at 30 mA cm−2. These differences are probably due to the greater interaction of Ag+ with [HSO4−] than with TfO−, as indicated by the MD simulations. The morphology of Ag deposits is independent of the electrodeposition temperature for both ILs, but higher values of temperature promoted increased cluster sizes. Pure face-centred cubic polycrystalline Ag was deposited on the films with crystallite sizes on the nanometre scale. The morphological dependence of Ag electrodeposits obtained in the [HMIM+][HSO4−] IL on the current density applied opens up the opportunity to produce different and predetermined Ag deposits. [ABSTRACT FROM AUTHOR]

This study examined the influence of citrate and tartrate as complexing agents on the electrodeposition and surface morphology of Cu-Ni layers. The alloys obtained in the tartaric acid and sulphate baths were nobler than those obtained in the citric acid/citrate and citric acid/citrate/tartaric acid media. The results indicated that the complexing medium influences the nobility and the type of mass transport of the alloy formed. The morphology of the electrodeposited Cu-Ni layers changed from a rather porous appearance in the absence of the complexing agents to nodular, cracked mud and cauliflower appearances for the citric acid/sodium citrate/sodium sulphate medium, tartaric acid/sodium sulphate medium and citric acid/sodium citrate/tartaric acid/sodium sulphate medium, respectively. The chemical composition of the Cu-Ni layers revealed the preferential deposition of copper. The ultraviolet-visible spectrophotometry measurements indicated the occurrence of the d-d type transition, regardless of the complexing medium employed. [ABSTRACT FROM AUTHOR]

Pharmaceuticals, as a contaminant of emergent concern, are being released uncontrollably into the environment potentially causing hazardous effects to aquatic ecosystems and consequently to human health. In the absence of well-established monitoring programs, one can only imagine the full extent of this problem and so there is an urgent need for the development of extremely sensitive, portable, and low-cost devices to perform analysis. Carbon-based nanomaterials are the most used nanostructures in (bio)sensors construction attributed to their facile and well-characterized production methods, commercial availability, reduced cost, high chemical stability, and low toxicity. However, most importantly, their relatively good conductivity enabling appropriate electron transfer rates—as well as their high surface area yielding attachment and extraordinary loading capacity for biomolecules—have been relevant and desirable features, justifying the key role that they have been playing, and will continue to play, in electrochemical (bio)sensor development. The present review outlines the contribution of carbon nanomaterials (carbon nanotubes, graphene, fullerene, carbon nanofibers, carbon black, carbon nanopowder, biochar nanoparticles, and graphite oxide), used alone or combined with other (nano)materials, to the field of environmental (bio)sensing, and more specifically, to pharmaceutical pollutants analysis in waters and aquatic species. The main trends of this field of research are also addressed. [ABSTRACT FROM AUTHOR]