Search

Nanostructured surfaces are effective at physically killing bacterial cells, highlighting their prospective application as biomaterials. The benefits of application of mechano‐bactericidal nanostructures as an alternative to chemical functionalisation are well documented, however, the effects of protein adsorption are not well understood. In this work, theoretical and experimental analyses are conducted by studying the adsorption of human serum proteins (HSP) to nanosheet titanium (Ti) and its subsequent effect on the mechano‐bactericidal efficacy toward Staphylococcus aureus and Pseudomonas aeruginosa cells. The nanosheet pattern exhibits enhanced antibiofouling behaviour mantaining high bactericidal efficiency toward both Gram‐negative and Gram‐positive cells in the presence of adsorbed HSP. To ascertain the immunomodulatory response, S. aureus cells are introduced to protein‐conditioned Ti nanosheet surfaces prior to introducing RAW 264.7 macrophages. On the pre‐infected nanostructured surfaces, macrophages exhibit wound healing behaviour with superior activation of M2‐like macrophage polarization and secretion of anti‐inflammatory cytokines. By contrast, macrophages attached to infected smooth surfaces activated the M1‐like polarized phenotype via the high expression of pro‐inflammatory cytokines, indicating persistent inflammation. The outcomes of this work demonstrate the suitability of Ti nanosheets as a potential biomaterial surface whereby the mechano‐bactericidal activity is not compromised by HSP adsorption and, furthermore, positively influenced an anti‐inflammatory immune response. [ABSTRACT FROM AUTHOR]

The proportion of hospital‐acquired medical device infections caused by pathogenic, multi‐drug resistant Candida species occurs in up to 10% of implantations. In this study, a unique antifungal micro‐pillared titanium surface pattern is developed, which demonstrates both fungicidal and fungistatic activity, persistently deterring biofilm formation by Candida albicans and multi‐drug resistant Candida auris fungi for up to 7 days. The Ti micropillars of 3.5 µm height are fabricated using maskless inductively coupled plasma reactive ion etching. The micro‐textured surface consistently kills ≈50% of Candida spp. irreversibly attached cells and prevent the proliferation of the remaining cells by inducing programmed cell death. Proteomic analysis reveals that Candida cells undergo extensive metabolic stress, preventing the transformation from yeast to the filamentous/hyphal cell phenotype that is essential for establishing a typical in vitro biofilm. The mechanical stress imparted following interaction with the micropillars injures attaching cells and induces apoptosis whereby the Candida cells are unable to be revived in a non‐stress environment. These findings shed new insight toward the design of durable antifungal surfaces that prevent biofilm formation by pathogenic, multi‐drug resistant yeasts. [ABSTRACT FROM AUTHOR]

The mechano-bactericidal action of nanostructured surfaces is well-documented; however, synthetic nanostructured surfaces have not yet been explored for their antifungal properties toward filamentous fungal species. In this study, we developed a biomimetic nanostructured surface inspired by dragonfly wings. A high-aspect-ratio nanopillar topography was created on silicon (nano-Si) surfaces using inductively coupled plasma reactive ion etching (ICP RIE). To mimic the superhydrophobic nature of insect wings, the nano-Si was further functionalised with trichloro(1H,1H,2H,2H-perfluorooctyl)silane (PFTS). The viability of Aspergillus brasiliensis spores, in contact with either hydrophobic or hydrophilic nano-Si surfaces, was determined using a combination of standard microbiological assays, confocal laser scanning microscopy (CLSM), and focused ion beam scanning electron microscopy (FIB-SEM). Results indicated the breakdown of the fungal spore membrane upon contact with the hydrophilic nano-Si surfaces. By contrast, hydrophobised nano-Si surfaces prevented the initial attachment of the fungal conidia. Hydrophilic nano-Si surfaces exhibited both antifungal and fungicidal properties toward attached A. brasisiensis spores via a 4-fold reduction of attached spores and approximately 9-fold reduction of viable conidia from initial solution after 24 h compared to their planar Si counterparts. Thus, we reveal, for the first time, the physical rupturing of attaching fungal spores by biomimetic hydrophilic nanostructured surfaces. [ABSTRACT FROM AUTHOR]

Gallium-based liquid metals (LMs) have emerged as novel materials for biomedical applications. Gallium (Ga) is considered significantly less toxic than other LMs, such as mercury. However, Ga droplets have not been thoroughly assessed for their cytotoxicity. Here, we report the concentration-dependent cytotoxic effects of Ga nano- and microdroplets on HaCaT cells, a human keratinocyte cell line. We found that Ga droplets demonstrated substantial cytotoxic effects at 1000 μg/mL after 24 h exposure, while lower concentrations such as 500 μg/mL indicated only a slight reduction in cell viability at longer exposure times. At higher concentrations, it was observed that the cells were unable to form confluent layers and the cytoplasmic membrane became damaged. The formation of a protein corona on the Ga droplets in cell media is also described, which will be an important consideration for future research on Ga droplets for bio-applications. Importantly, this work provides an indication of the concentration at which Ga droplets become damaging to human cells, which will be useful information for a wide range of researchers and regulatory bodies. [ABSTRACT FROM AUTHOR]

This article, titled "Understanding the Influence of Serum Proteins Adsorption on the Mechano-Bactericidal Efficacy and Immunomodulation of Nanostructured Titanium," explores the use of antibacterial biomimetic nanostructures coated in human serum proteins to eliminate Staphylococcus aureus bacteria. The study found that these nanostructures not only effectively kill bacteria but also prompt the release of anti-inflammatory cytokines by macrophage cells, which promotes healing. The authors of the article are Karolinne Martins de Sousa, Denver P. Linklater, Vladimir A. Baulin, Chaitali Dekiwadia, Edwin Mayes, Billy J. Murdoch, Phuc H. Le, Christopher J. Fluke, Veselin Boshkovikj, Cuie Wen, Russell J. Crawford, and Elena P. Ivanova. [Extracted from the article]

Liquid metals (LMs) have emerged as novel materials for biomedical applications. Here, the interactions taking place between cells and LMs are reported, presenting a unique opportunity to explore and understand the LM‐biological interface. Several high‐resolution imaging techniques are used to characterize the interaction between droplets of gallium LM and bacterial, fungal, and mammalian cells. Adhesive interactions between cells and LM droplets are observed, causing deformation of the LM droplet surface, resulting in surface wrinkling and in some cases, breakage of the native oxide layer present on the LM droplet surface. In many instances, the cell wall deforms to intimately contact the LM droplets. Single‐cell force spectroscopy is performed to quantify the adhesion forces between cells and LM and characterize the nature of the adhesion. It is proposed that the flexible nature of the cell enables multiple adhesion sites with the LM droplets, imparting tensile forces on the LM droplet surface, which results in surface wrinkling on the LM droplets due to their liquid nature. Molecular dynamics simulations also suggest that flexible biomolecules on the cell surface can disrupt the Ga2O3 layer formed at the LM droplet surface. This study reveals a unique biointerfacial interaction and provides insights into the mechanisms involved. [ABSTRACT FROM AUTHOR]

This work presents a comprehensive analytical survey of the antibacterial and antibiofouling properties of sub-100-nanometer scale nanopatterned polymers fabricated using scalable industrial processes that are directly applicable for commercial use. Regular nanopillar arrays of 60 nm height and 60 nm pitch were fabricated on polyethylene terephthalate (PET), polypropylene (PP), acrylic, and nylon polymer films using nanoimprint lithography. Analyses of the influence of material type on antibacterial performance revealed that the nanoscale patterns produced using acrylic and nylon polymers were most suitable as anti-infective nanostructured materials. Further assessment of the influence of the nanopattern geometric parameters on the antibacterial efficacy of acrylic and nylon materials revealed the superlative pattern for inactivating and repelling both Gram-positive and Gram-negative bacteria. Acrylic nanostructured films consisting of nanopillars with a height of 60 nm and pitch of 30 nm, respectively, demonstrated distinctly superior antimicrobial and antibiofouling behavior toward both Gram-negative Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus bacterial species. [ABSTRACT FROM AUTHOR]

Deep eutectic solvents (DESs) are tuneable solvents with attractive properties for numerous applications. Their structure–property relationships are still under investigation, especially at the solid–liquid interface. Moreover, the influence of water on interfacial nanostructure must be understood for process optimization. Here, we employ a combination of atomic force microscopy and molecular dynamics simulations to determine the lateral and surface-normal nanostructure of the DES choline chloride:glycerol at the mica interface with different concentrations of water. For the neat DES system, the lateral nanostructure is driven by polar interactions. The surface adsorbed layer forms a distinct rhomboidal symmetry, with a repeat spacing of ~0.9 nm, comprising all DES species. The adsorbed nanostructure remains largely unchanged in 75 mol-% DES compared with pure DES, but at 50 mol-%, the structure is broken and there is a compromise between the native DES and pure water structure. By 25 mol-% DES, the water species dominates the adsorbed liquid layer, leaving very few DES species aggregates at the interface. In contrast, the near-surface surface-normal nanostructure, over a depth of ~3 nm from the surface, remains relatively unchanged down to 25 mol-% DES where the liquid arrangement changed. These results demonstrate not only the significant influence that water has on liquid nanostructure, but also show that there is an asymmetric effect whereby water disrupts the nanostructure to a greater degree closer to the surface. This work provides insight into the complex interactions between DES and water and may enhance their optimization for surface-based applications. The deep eutectic solvent interface is nanostructured, both laterally across and normal to the surface. Combined atomic force microscopy, computational, and theoretical investigations show that the presence of water can modulate this structure. [ABSTRACT FROM AUTHOR]

Polymer matrix composite materials have the capacity to aid the indirect transmission of viral diseases. Published research shows that respiratory viruses, including severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2 or COVID‐19), can attach to polymer substrata as a result of being contacted by airborne droplets resulting from infected people sneezing or coughing in close proximity. Polymer matrix composites are used to produce a wide range of products that are "high‐touch" surfaces, such as sporting goods, laptop computers and household fittings, and these surfaces can be readily contaminated by pathogens. This article reviews published research on the retention of SARS‐CoV‐2 and other virus types on plastics. The factors controlling the viral retention time on plastic surfaces are examined and the implications for viral retention on polymer composite materials are discussed. Potential strategies that can be used to impart antiviral properties to polymer composite surfaces are evaluated. These strategies include modification of the surface composition with biocidal agents (e.g., antiviral polymers and nanoparticles) and surface nanotexturing. The potential application of these surface modification strategies in the creation of antiviral polymer composite surfaces is discussed, which opens up an exciting new field of research for composite materials. [ABSTRACT FROM AUTHOR]

A major health concern of the 21st century is the rise of multi-drug resistant pathogenic microbial species. Recent technological advancements have led to considerable opportunities for low-dimensional materials (LDMs) as potential next-generation antimicrobials. LDMs have demonstrated antimicrobial behaviour towards a variety of pathogenic bacterial and fungal cells, due to their unique physicochemical properties. This review provides a critical assessment of current LDMs that have exhibited antimicrobial behaviour and their mechanism of action. Future design considerations and constraints in deploying LDMs for antimicrobial applications are discussed. It is envisioned that this review will guide future design parameters for LDM-based antimicrobial applications. [ABSTRACT FROM AUTHOR]

The formation and proliferation of bacterial biofilms on surfaces, particularly those on biomedical devices, is a significant issue that results in substantial economic losses, presenting severe health risks to patients. Furthermore, heterogeneous biofilms consisting of different bacterial species can induce the increase in pathogenicity, and the resistance to antimicrobial agents due to the synergistic interactions between the different species. Heterogeneous bacterial biofilms are notoriously difficult to treat due to the presence of extracellular polymeric substances (EPS) and, in conjunction with the rapid rise of multi-drug resistant pathogens, this means that new solutions for anti-biofilm treatment are required. In this study, we investigate the application of magneto-responsive gallium-based liquid metal (GLM-Fe) nanomaterials against a broad range of Gram-positive and Gram-negative bacterial mono-species and multi-species biofilms. The GLM-Fe particles exhibit a magneto-responsive characteristic, causing spherical particles to undergo a shape transformation to high-aspect-ratio nanoparticles with sharp asperities in the presence of a rotating magnetic field. These shape-transformed particles are capable of physically removing bacterial biofilms and rupturing individual cells. Following treatment, both mono-species and multi-species biofilms demonstrated significant reductions in their biomass and overall cell viability, demonstrating the broad-spectrum application of this antibacterial technology. Furthermore, the loss of integrity of the bacterial cell wall and membranes was visualized using a range of microscopy techniques, and the leakage of intracellular components (such as nucleic acids and protein) was observed. Insights gained from this study will impact the design of future liquid metal-based biofilm treatments, particularly those that rely on magneto-responsive properties. [ABSTRACT FROM AUTHOR]

The mechano-bactericidal activity of nanostructured surfaces has become the focus of intensive research toward the development of a new generation of antibacterial surfaces, particularly in the current era of emerging antibiotic resistance. This work demonstrates the effects of an incremental increase of nanopillar height on nanostructure-induced bacterial cell death. We propose that the mechanical lysis of bacterial cells can be influenced by the degree of elasticity and clustering of highly ordered silicon nanopillar arrays. Herein, silicon nanopillar arrays with diameter 35 nm, periodicity 90 nm and increasing heights of 220, 360, and 420 nm were fabricated using deep UV immersion lithography. Nanoarrays of 360-nm-height pillars exhibited the highest degree of bactericidal activity toward both Gram stain-negative Pseudomonas aeruginosa and Gram stain-positive Staphylococcus aureus bacteria, inducing 95 ± 5% and 83 ± 12% cell death, respectively. At heights of 360 nm, increased nanopillar elasticity contributes to the onset of pillar deformation in response to bacterial adhesion to the surface. Theoretical analyses of pillar elasticity confirm that deflection, deformation force, and mechanical energies are more significant for the substrata possessing more flexible pillars. Increased storage and release of mechanical energy may explain the enhanced bactericidal action of these nanopillar arrays toward bacterial cells contacting the surface; however, with further increase of nanopillar height (420 nm), the forces (and tensions) can be partially compensated by irreversible interpillar adhesion that reduces their bactericidal effect. These findings can be used to inform the design of next-generation mechano-responsive surfaces with tuneable bactericidal characteristics for antimicrobial surface technologies. [ABSTRACT FROM AUTHOR]

The development of antimicrobial drug resistance among pathogenic bacteria and fungi is one of the most significant health issues of the 21st century. Recently, advances in nanotechnology have led to the development of nanomaterials, particularly metals that exhibit antimicrobial properties. These metal nanomaterials have emerged as promising alternatives to traditional antimicrobial therapies. In this review, a broad overview of metal nanomaterials, their synthesis, properties, and interactions with pathogenic micro‐organisms is first provided. Secondly, the range of nanomaterials that demonstrate passive antimicrobial properties are outlined and in‐depth analysis and comparison of stimuli‐responsive antimicrobial nanomaterials are provided, which represent the next generation of microbiocidal nanomaterials. The stimulus applied to activate such nanomaterials includes light (including photocatalytic and photothermal) and magnetic fields, which can induce magnetic hyperthermia and kinetically driven magnetic activation. Broadly, this review aims to summarize the currently available research and provide future scope for the development of metal nanomaterial‐based antimicrobial technologies, particularly those that can be activated through externally applied stimuli. [ABSTRACT FROM AUTHOR]

The colonisation of biomaterial surfaces by pathogenic bacteria is a significant issue of concern, particularly in light of the rapid rise of antibiotic resistance. Current strategies are proving ineffective as multi-drug resistant pathogenic bacteria emerge. Recently, it was discovered that surfaces with nanoscale features are capable of physically rupturing bacteria and hence displaying mechano-bactericidal activity. In this study, we investigated the interactions between methicillin- and gentamicin-susceptible and -resistant Staphylococcus aureus strains and nanostructured titanium surfaces, fabricated using a hydrothermal etching process. The nanostructured titanium surfaces proved to be equally effective and highly bactericidal against both the susceptible and resistant S. aureus strains, with killing efficiencies of 80.7% ± 12.0 and 86.8% ± 11.6, respectively. The mechano-bactericidal activity of these nanostructured titanium surfaces offers an innovative solution to establish medical device surfaces with antimicrobial activity in the context of increasing antibiotic resistance. [ABSTRACT FROM AUTHOR]

Cellular attachment plays a vital role in the differentiation of pheochromocytoma (PC12) cells. PC12 cells are noradrenergic clonal cells isolated from the adrenal medulla of Rattus norvegicus and studied extensively as they have the ability to differentiate into sympathetic neuron-like cells. The effect of several experimental parameters including (i) the concentration of nerve growth factor (NGF); (ii) substratum coatings, such as poly-L-lysine (PLL), fibronectin (Fn), and laminin (Lam); and (iii) double coatings composed of PLL/Lam and PLL/Fn on the differentiation process of PC12 cells were studied. Cell morphology was visualised using brightfield phase contrast microscopy, cellular metabolism and proliferation were quantified using a 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay, and the neurite outgrowth and axonal generation of the PC12 cells were evaluated using wide field fluorescence microscopy. It was found that double coatings of PLL/Lam and PLL/Fn supported robust adhesion and a two-fold enhanced neurite outgrowth of PC12 cells when treated with 100 ng/mL of NGF while exhibiting stable metabolic activity, leading to the accelerated generation of axons. [ABSTRACT FROM AUTHOR]

Surface modification of polymers and paints is a popular and effective way to enhance the properties of these materials. This can be achieved by introducing a thin coating that preserves the bulk properties of the material, while protecting it from environmental exposure. Suitable materials for such coating technologies are inorganic oxides, such as alumina, titania and silica; however, the fate of these materials during long-term environmental exposure is an open question. In this study, polymer coatings that had been enhanced with the addition of silica nanoparticles (SiO2NPs) and subsequently subjected to environmental exposure, were characterized both before and after the exposure to determine any structural changes resulting from the exposure. High-resolution synchrotron macro ATR-FTIR microspectroscopy and surface topographic techniques, including optical profilometry and atomic force microscopy (AFM), were used to determine the long-term effect of the environment on these dual protection layers after 3 years of exposure to tropical and sub-tropical climates in Singapore and Queensland (Australia). Principal component analysis (PCA) based on the synchrotron macro ATR-FTIR spectral data revealed that, for the 9% (w/w) SiO2NP/polymer coating, a clear discrimination was observed between the control group (no environmental exposure) and those samples subjected to three years of environmental exposure in both Singapore and Queensland. The PCA loading plots indicated that, over the three year exposure period, a major change occurred in the triazine ring vibration in the melamine resins. This can be attributed to the triazine ring being very sensitive to hydrolysis under the high humidity conditions in tropical/sub-tropical environments. This work provides the first direct molecular evidence, acquired using a high-resolution mapping technique, of the climate-induced chemical evolution of a polyester coating. The observed changes in the surface topography of the coating are consistent with the changes in chemical composition. [ABSTRACT FROM AUTHOR]

The mechanisms by which various biological effects are triggered by exposure to an electromagnetic field are not fully understood and have been the subject of debate. Here, the effects of exposing typical representatives of the major microbial taxa to an 18 GHz microwave electromagnetic field (EMF)were studied. It appeared that the EMF exposure induced cell permeabilisation in all of the bacteria and yeast studied, while the cells remained viable (94% throughout the exposure), independent of the differences in cell membrane fatty acid and phospholipid composition. The resulting cell permeabilisation was confirmed by detection of the uptake of propidium iodine and 23 nm fluorescent silica nanospheres using transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM). Upon EMF exposure, the bacterial cell membranes are believed to become permeable through quasi-endocytosis processes. The dosimetry analysis revealed that the EMF threshold level required to induce the uptake of the large (46 nm) nanopsheres was between three and six EMF doses, with a specific absorption rate (SAR) of 3 kW/kg and 5 kW/kg per exposure, respectively, depending on the bacterial taxa being studied. It is suggested that the taxonomic affiliation and lipid composition (e.g. the presence of phosphatidyl-glycerol and/or pentadecanoic fatty acid) may affect the extent of uptake of the large nanospheres (46 nm). Multiple 18 GHz EMF exposures over a one-hour period induced periodic anomalous increases in the cell growth behavior of two Staphylococcus aureus strains, namely ATCC 25923 and CIP 65.8T. [ABSTRACT FROM AUTHOR]

Damselflies Calopteryx haemorrhoidalis exhibiting black wings are found in the western Mediterranean, Algeria, France, Italy, Spain and Monaco. Wing pigmentation is caused by the presence of melanin, which is involved in physiological processes including defence reactions, wound healing and sclerotization of the insect. Despite the important physiological roles of melanin, the presence and colour variation among males and females of the C. haemorrhoidalis species and the localization of the pigment within the wing membrane remain poorly understood. In this study, infrared (IR) microspectroscopy, coupled with the highly collimated synchrotron IR beam, was employed in order to identify the distribution of the pigments in the wings at a high spatial resolution. It was found that the melanin is localized in the procuticle of the C. haemorrhoidalis damselfly wings, distributed homogeneously within this layer, and not associated with the lipids of the epicuticle. [ABSTRACT FROM AUTHOR]

Aliphatic crystallites, characteristic of the eicosane and docosane components of naturally occurring lipids, were found to form microtextures that were structured by specific interactions with ordered graphite (HOPG) used as the underlying substratum, as confirmed by scanning electron microscopy (SEM) and fast Fourier transform (FFT) analysis. Confocal scanning laser microscopy (CLSM) showed highly directed bacterial alignment for two bacterial species (spherical and rod-shaped), reflecting the preferential orientation of the crystallite–air–water interfaces to give linear and triangular bacterial patterning. The mechanisms of bacterial attachment are demonstrated in terms of the balance between effective radial adhesional forces and the capillary forces resulting from the water contact angle of the bacteria at the three-phase line (TPL) of the lipid surface. It is suggested that these microtextured surfaces, which exhibit the ability to limit bacterial adhesion to a precise patterning at the lipid TPL, could be used as a means of controlling bacterial colonization. [ABSTRACT FROM PUBLISHER]

Billions of dollars are spent annually worldwide to combat the adverse effects of bacterial attachment and biofilm formation in industries as varied as maritime, food, and health. While advances in the fabrication of antifouling surfaces have been reported recently, a number of the essential aspects responsible for the formation of biofilms remain unresolved, including the important initial stages of bacterial attachment to a substrate surface. The reduction of bacterial attachment to surfaces is a key concept in the prevention or minimization of biofilm formation. The chemical and physical characteristics of both the substrate and bacteria are important in understanding the attachment process, but substrate modification is likely the most practical route to enable the extent of bacterial attachment taking place to be effectively controlled. The microtopography and chemistry of the surface are known to influence bacterial attachment. The role of surface chemistry versus nanotopography and their interplay, however, remain unclear. Most methods used for imparting nanotopographical patterns onto a surface also induce changes in the surface chemistry and vice versa. In this study, the authors combine colloidal lithography and plasma polymerization to fabricate homogeneous, reproducible, and periodic nanotopographies with a controllable surface chemistry. The attachment of Escherichia coli bacteria onto carboxyl (plasma polymerized acrylic acid, ppAAc) and hydrocarbon (plasma polymerized octadiene, ppOct) rich plasma polymer films on either flat or colloidal array surfaces revealed that the surface chemistry plays a critical role in bacterial attachment, whereas the effect of surface nanotopography on the bacterial attachment appears to be more difficult to define. This platform represents a promising approach to allow a greater understanding of the role that surface chemistry and nanotopography play on bacterial attachment and the subsequent biofouling of the surface. [ABSTRACT FROM AUTHOR]

Two non-pigmented, motile, Gram-negative marine bacteria designated R9SW1T and A3d10T were isolated from sea water samples collected from Chazhma Bay, Gulf of Peter the Great, Sea of Japan, Pacific Ocean, Russia and St. Kilda Beach, Port Phillip Bay, the Tasman Sea, Pacific Ocean, respectively. Both organisms were found to grow between 4°C and 40°C, between pH 6 to 9, and are moderately halophilic, tolerating up to 20% (w/v) NaCl. Both strains were found to be able to degrade Tween 40 and 80, but only strain R9SW1T was found to be able to degrade starch. The major fatty acids were characteristic for the genus Marinobacter including C16:0, C16:1ω7c, C18:1ω9c and C18:1ω7c. The G+C content of the DNA for strains R9SW1T and A3d10T were determined to be 57.1 mol% and 57.6 mol%, respectively. The two new strains share 97.6% of their 16S rRNA gene sequences, with 82.3% similarity in the average nucleotide identity (ANI), 19.8% similarity in the in silico genome-to-genome distance (GGD), 68.1% similarity in the average amino acid identity (AAI) of all conserved protein-coding genes, and 31 of the Karlin's genomic signature dissimilarity. A phylogenetic analysis showed that R9SW1T clusters with M. algicola DG893T sharing 99.40%, and A3d10T clusters with M. sediminum R65T sharing 99.53% of 16S rRNA gene sequence similarities. The results of the genomic and polyphasic taxonomic study, including genomic, genetic, phenotypic, chemotaxonomic and phylogenetic analyses based on the 16S rRNA, gyrB and rpoD gene sequence similarities, the analysis of the protein profiles generated using MALDI-TOF mass spectrometry, and DNA-DNA relatedness data, indicated that strains R9SW1T and A3d10T represent two novel species of the genus Marinobacter. The names Marinobacter salarius sp. nov., with the type strain R9SW1T ( =  LMG 27497T  =  JCM 19399T  =  CIP 110588T  =  KMM 7502T) and Marinobacter similis sp. nov., with the type strain A3d10T ( =  JCM 19398T  =  CIP 110589T  =  KMM 7501T), are proposed. [ABSTRACT FROM AUTHOR]

Insects and plants are two types of organisms that are widely separated on the evolutionary tree; for example, plants are mostly phototrophic organisms whilst insects are heterotrophic organisms. In order to cope with environmental stresses, their surfaces have developed cuticular layers that consist of highly sophisticated structures. These structures serve a number of purposes, and impart useful properties to these surfaces. These two groups of organisms are the only ones identified thus far that possess truly superhydrophobic and self-cleaning properties. These properties result from their microand nano-scale structures, comprised of three-dimensional wax formations. This review analyzes the surface topologies and surface chemistry of insects and plants in order to identify the features common to both organisms, with particular reference to their superhydrophobic and self-cleaning properties. This information will be valuable when determining the potential application of these surfaces in the design and manufacture of superhydrophobic and self-cleaning devices, including those that can be used in the manufacture of biomedical implants. [ABSTRACT FROM AUTHOR]

Microscale devices are increasingly being developed for diagnostic analysis although conventional lysis as an initial step presents limitations due to its scale or complexity. Here, we detail the physical response of erythrocytes to the surface nanoarchitecture of black Si (bSi) and foreshadow their potential in microanalysis. The physical interaction brought about by the spatial convergence of the two topologies: (a) the nanopillar array present on the bSi and (b) the erythrocyte cytoskeleton present on the red blood cells (RBCs), provides spontaneous stress-induced cell deformation, rupture and passive lysis within an elapsed time of ~3 min from immobilisation to rupture and without external chemical or mechanical intervention. The mechano-responsive bSi surface provides highly active yet autogenous RBC lysis and a prospect as a front-end platform technology in evolving micro-fluidic platforms for cellular analyses. [ABSTRACT FROM AUTHOR]

Microscale devices are increasingly being developed for diagnostic analysis although conventional lysis as an initial step presents limitations due to its scale or complexity. Here, we detail the physical response of erythrocytes to the surface nanoarchitecture of black Si (bSi) and foreshadow their potential in microanalysis. The physical interaction brought about by the spatial convergence of the two topologies: (a) the nanopillar array present on the bSi and (b) the erythrocyte cytoskeleton present on the red blood cells (RBCs), provides spontaneous stress-induced cell deformation, rupture and passive lysis within an elapsed time of ~3 min from immobilisation to rupture and without external chemical or mechanical intervention. The mechano-responsive bSi surface provides highly active yet autogenous RBC lysis and a prospect as a front-end platform technology in evolving micro-fluidic platforms for cellular analyses. [ABSTRACT FROM AUTHOR]

There has been a growing interest in understanding the ways in which bacteria interact with nano-structured surfaces. As a result, there is a need for innovative approaches to enable researchers to visualize the biological processes taking place, despite the fact that it is not possible to directly observe these processes. We present a novel approach for the three-dimensional visualization of bacterial interactions with nano-structured surfaces using the software package Autodesk Maya. Our approach comprises a semi-automated stage, where actual surface topographic parameters, obtained using an atomic force microscope, are imported into Maya via a custom Python script, followed by a 'creative stage', where the bacterial cells and their interactions with the surfaces are visualized using available experimental data. The 'Dynamics' and 'nDynamics' capabilities of the Maya software allowed the construction and visualization of plausible interaction scenarios. This capability provides a practical aid to knowledge discovery, assists in the dissemination of research results, and provides an opportunity for an improved public understanding. We validated our approach by graphically depicting the interactions between the two bacteria being used for modeling purposes, Staphylococcus aureus and Pseudomonas aeruginosa, with different titanium substrate surfaces that are routinely used in the production of biomedical devices. [ABSTRACT FROM AUTHOR]

Keywords: biointerface; cell interactions; cells; gallium; liquid metal EN biointerface cell interactions cells gallium liquid metal 1 1 1 03/03/22 20220301 NES 220301 B Liquid Metal Droplet-Cell Interactions b In article number 2102113, Samuel Cheeseman, Aaron Elbourne, James Chapman, Vi Khanh Truong, and co-workers use high-resolution imaging techniques to characterize the interactions between liquid metal droplets and bacterial, fungal, and mammalian cells. Understanding the cell-liquid metal interface is important as liquid metals are increasingly utilized for biomedical applications. Biointerface, cell interactions, cells, gallium, liquid metal. [Extracted from the article]

The molecular organization of the epicuticle (the outermost layer) of insect wings is vital in the formation of the nanoscale surface patterns that are responsible for bestowing remarkable functional properties. Using a combination of spectroscopic and chromatographic techniques, including Synchrotron-sourced Fourier-transform infrared microspectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS) depth profiling and gas chromatography-mass spectrometry (GCMS), we have identified the chemical components that constitute the nanoscale structures on the surface of the wings of the dragonfly, Hemianax papuensis. The major components were identified to be fatty acids, predominantly hexadecanoic acid and octadecanoic acid, and n-alkanes with even numbered carbon chains ranging from C14 to C30. The data obtained from XPS depth profiling, in conjunction with that obtained from GCMS analyses, enabled the location of particular classes of compounds to different regions within the epicuticle. Hexadecanoic acid was found to be a major component of the outer region of the epicuticle, which forms the surface nanostructures, and was also detected in deeper layers along with octadecanoic acid. Aliphatic compounds were detected throughout the epicuticle, and these appeared to form a third discrete layer that was separate from both the inner and outer epicuticles, which has never previously been reported. [ABSTRACT FROM AUTHOR]

The wings of some insects, such as cicadae, have been reported to possess a number of interesting and unusual qualities such as superhydrophobicity, anisotropic wetting and antibacterial properties. Here, the chemical composition of the wings of the Clanger cicada ( Psaltoda claripennis) were characterized using infrared (IR) microspectroscopy. In addition, the data generated from two separate synchrotron IR facilities, the Australian Synchrotron Infrared Microspectroscopy beamline (AS-IRM) and the Synchrotron Radiation Center (SRC), University of Wisconsin-Madison, IRENI beamline, were analysed and compared. Characteristic peaks in the IR spectra of the wings were assigned primarily to aliphatic hydrocarbon and amide functionalities, which were considered to be an indication of the presence of waxy and proteinaceous components, respectively, in good agreement with the literature. Chemical distribution maps showed that, while the protein component was homogeneously distributed, a significant degree of heterogeneity was observed in the distribution of the waxy component, which may contribute to the self-cleaning and aerodynamic properties of the cicada wing. When comparing the data generated from the two beamlines, it was determined that the SRC IRENI beamline was capable of producing higher-spatial-resolution distribution images in a shorter time than was achievable at the AS-IRM beamline, but that spectral noise levels per pixel were considerably lower on the AS-IRM beamline, resulting in more favourable data where the detection of weak absorbances is required. The data generated by the two complementary synchrotron IR methods on the chemical composition of cicada wings will be immensely useful in understanding their unusual properties with a view to reproducing their characteristics in, for example, industry applications. [ABSTRACT FROM AUTHOR]

With increasing global consumption and their natural resistance to degradation, plastic materials and their accumulation in the environment is of increasing concern. This review aims to present a general overview of the current state of knowledge in areas that relate to biodegradation of polymers, especially poly(ethylene terephthalate) (PET). This includes an outline of the problems associated with plastic pollution in the marine environment, a description of the properties, commercial manufacturing and degradability of PET, an overview of the potential for biodegradation of conventional polymers and biodegradable polymers already in production. [ABSTRACT FROM AUTHOR]

Biomaterials play a fundamental role in disease management and the improvement of health care. In recent years, there has been a significant growth in the diversity, function, and number of biomaterials used worldwide. Yet, attachment of pathogenic microorganisms onto biomaterial surfaces remains a significant challenge that substantially undermines their clinical applicability, limiting the advancement of these systems. The emergence and escalating pervasiveness of antibiotic-resistant bacterial strains makes the management of biomaterial-associated nosocomial infections increasingly difficult. The conventional post-operative treatment of implant-caused infections using systemic antibiotics is often marginally effective, further accelerating the extent of antimicrobial resistance. Methods by which the initial stages of bacterial attachment and biofilm formation can be restricted or prevented are therefore sought. The surface modification of biomaterials has the potential to alleviate pathogenic biofouling, therefore preventing the need for conventional antibiotics to be applied. [ABSTRACT FROM AUTHOR]

The nanoarchitecture and surface roughness of metallic thin films prepared by magnetron sputtering were analyzed to determine the topographical statistics that give the optimum description of their nanoarchitechture. Nanoscale topographical profiles were generated by performing atomic force microscopy (AFM) scans of 1 μm × 1 μm areas of titanium and silver films of three different thicknesses (3 nm, 12 nm, and 150 nm). Of the titanium films, the 150-nm film had the highest average roughness ( Ra = 2.63 nm), more than four times that of the 3-nm and 12-nm titanium films. When silver films were coated on top of 150-nm titanium films, the average roughness increased further; the 3-nm ( Ra = 4.96 nm) and 150-nm ( Ra = 4.65 nm) silver films average roughnesses were approximately twice that of the 150-nm titanium film. For topographical analysis, seven statistical parameters were calculated. These parameters included commonly used roughness measurements, as well as some less commonly used measurements, in order to determine which combination of parameters gave the best overall description of the nanoarchitecture of the films presented. Skewness ( Rskw), surface area increase ( Rsa), and peak counts ( Rpc) provided the best description of horizontal surface dimensions, and in conjunction with vertical descriptors Ra and Rq gave the best characterization of surface architecture. The five roughness parameters Ra, Rq, Rskw, Rsa, and Rpc are proposed as a new standard for describing surface nanoarchitecture. SCANNING 34: 257-263, 2012. © 2012 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Marine microorganisms have evolved for millions of years to survive in the environments characterized by one or more extreme physical or chemical parameters, e.g., high pressure, low temperature or high salinity. Marine bacteria have the ability to produce a range of biologically active molecules, such as antibiotics, toxins and antitoxins, antitumor and antimicrobial agents, and as a result, they have been a topic of research interest for many years. Among these biologically active molecules, the carbohydrate antigens, lipopolysaccharides (LPSs, O-antigens) found in cell walls of Gram-negative marine bacteria, show great potential as candidates in the development of drugs to prevent septic shock due to their low virulence. The structural diversity of LPSs is thought to be a reflection of the ability for these bacteria to adapt to an array of habitats, protecting the cell from being compromised by exposure to harsh environmental stress factors. Over the last few years, the variety of structures of core oligosaccharides and O-specific polysaccharides from LPSs of marine microrganisms has been discovered. In this review, we discuss the most recently encountered structures that have been identified from bacteria belonging to the genera Aeromonas, Alteromonas, Idiomarina, Microbulbifer, Pseudoalteromonas, Plesiomonas and Shewanella of the Gammaproteobacteria phylum; Sulfitobacter and Loktanella of the Alphaproteobactera phylum and to the genera Arenibacter, Cellulophaga, Chryseobacterium, Flavobacterium, Flexibacter of the Cytophaga-Flavobacterium-Bacteroides phylum. Particular attention is paid to the particular chemical features of the LPSs, such as the monosaccharide type, non-sugar substituents and phosphate groups, together with some of the typifying traits of LPSs obtained from marine bacteria. A possible correlation is then made between such features and the environmental adaptations undertaken by marine bacteria. [ABSTRACT FROM AUTHOR]

The physicochemical and bactericidal properties of thin silver films have been analysed. Silver films of 3 and 150 nm thicknesses were fabricated using a magnetron sputtering thin-film deposition system. X-ray photoelectron and energy dispersive X-ray spectroscopy and atomic force microscopy analyses confirmed that the resulting surfaces were homogeneous, and that silver was the most abundant element present on both surfaces, being 45 and 53 at.% on the 3- and 150-nm films, respectively. Inductively coupled plasma time of flight mass spectroscopy (ICP-TOF-MS) was used to measure the concentration of silver ions released from these films. Concentrations of 0.9 and 5.2 ppb were detected for the 3- and 150-nm films, respectively. The surface wettability of the films remained nearly identical for both film thicknesses, displaying a static water contact angle of 95°, while the surface free energy of the 150-nm film was found to be slightly greater than that of the 3-nm film, being 28.8 and 23.9 mN m, respectively. The two silver film thicknesses exhibited statistically significant differences in surface topographic profiles on the nanoscopic scale, with R, R and R values of 1.4, 1.8 and 15.4 nm for the 3-nm film and 0.8, 1.2 and 10.7 nm for the 150-nm film over a 5 × 5 μm scanning area. Confocal scanning laser microscopy and scanning electron microscopy revealed that the bactericidal activity of the 3-nm silver film was not significant, whereas the nanoscopically smoother 150-nm silver film exhibited appreciable bactericidal activity towards Pseudomonas aeruginosa ATCC 9027 cells and Staphylococcus aureus CIP 65.8 cells, obtaining up to 75% and 27% sterilisation effect, respectively. [ABSTRACT FROM AUTHOR]