Search

Binder jetting (BJ) sand printing is a 3D printing process in which a sand mould or sand core is produced from an STL file. A single layer of a sand matrix consisting of one or more grains in height of sand is applied to a worktable, and then a liquid resin or binder is applied to bond the grains together. This process is repeated until the final result matches the CAD model. The sand matrix is the main component of ceramic cores and moulds. The present study aims to demonstrate the influence of the matrix used on the properties of the resulting moulding sand. Three types of sand matrices were selected for the study. The first was a quartz matrix for 3D printing with binder jetting; this is characterised by a sharp geometry that allows for proper layering during printing. Ordinary quartz sand was also used for the study; this type of sand is usually used for the production of sand cores in the hotbox process, among other things. The shape of this sand is irregular. The last matrix to be tested was Cerabeads sand; this was selected because its spherical geometry clearly distinguishes it from the other two matrices. The matrices were analysed for their grain sizes. Scanning electron microscope images were also taken to compare the geometries and chemical compositions of the respective matrices. In presented research utilises a sand matrix for the production of self-curing compounds with furan resin dedicated for binder jetting 3D printing. The moulding masses were produced in a laboratory circulation mixer. The laboratory moulds were produced with wooden core boxes and pre-compacted by vibration. The samples from the matrix for the 3D printing were produced using the binder jetting method. The samples were produced to determine the flexural strength, tensile strength, gas permeability, hot distortion, and apparent density. It was not possible to carry out tests for the Cerabeads sand, as the obtained moulds were too brittle to perform adequate tests. Tests with the other matrices have shown that the shape and size of the matrix affect the apparent density and gas permeability. [ABSTRACT FROM AUTHOR]

The method of the ongoing assessment of the reclaim quality originating from the mechanical reclamation is described in this paper. In the process, the triboelectric system of measuring amounts of dust in the dedusting part of a reclamation device was applied. Based on the online measurements of the amounts of dust generated in the spent sand-reclamation process and the post-process determinations of the ignition losses and granular structures of the removed dust, the proper work parameters of the experimental reclaimer were selected. The allowable value of the ignition losses as well as the main fraction of the reclaimed matrix being similar to fresh sand was assumed as the main criteria of the positive assessment of the process. Within the presented investigations, a periodically operating device for rotormechanical reclamation was developed. The possibility of changing the intensity and time of the reclamation treatment as well as the triboelectric system of the dust-amount measuring were applied in this device. Tests were performed for the spent moulding sand with phenol-resol resin Carbophen 5692 hardened by CO2. This sand represents the moulding sand group with a less harmful influence on the surroundings for which the recovery of the quartz matrix utilising the reclamation requires stricter control of the parameters of the reclamation process and reclaim quality. [ABSTRACT FROM AUTHOR]

Copyright of Der Unfallchirurg is the property of Springer Nature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The increasing prevalence of fragility fractures of the sacrum (FFS) occurring predominantly in osteoporotic individuals poses a diagnostic and therapeutic challenge. The clinical presentation varies from longstanding low back pain without the patient remembering a traumatic event to immobilized patients after suffering a low-energy trauma. FFS are often combined with a fracture of the anterior pelvic ring; hence they are classified as a part of fragility fractures of the pelvis (FFP). If not displaced, the patients are treated with weight bearing as tolerated and analgesics; however, we advocate to treat displaced fractures surgically according to the fracture personality and the patient's comorbidities. Surgical options include minimal invasive sacro-iliac screws, trans-sacral bar osteosynthesis, open reduction and internal fixation, or spinopelvic stabilization. In the light of the high complication rate associated with immobilized patients, an operative approach often is indicated to accelerate the patient's mobility. [ABSTRACT FROM AUTHOR]