Search

Thin‐film epitaxial silicon solar cells are an attractive future alternative for bulk silicon solar cells incorporating many of the process advantages of the latter, but on a potentially cheap substrate. Several challenges have to be tackled before this potential can be successfully exploited on a large scale. This paper describes the points of interest and how IMEC aims to solve them. It presents a new step forward towards our final objective: the development of an industrial cell process based on screen‐printing for > 15% efficient epitaxial silicon solar cells on a low‐cost substrate.Included in the discussion are the substrates onto which the epitaxial deposition is done and how work is progressing in several research institutes and universities on the topic of a high‐throughput epitaxial reactor. The industrial screen‐printing process sequence developed at IMEC for these epitaxial silicon solar cells is presented, with emphasis on plasma texturing and improvement of the quality of the epitaxial layer. Efficiencies between 12 and 13% are presented for large‐area (98 cm2) epitaxial layers on highly doped UMG‐Si, off‐spec and reclaim material. Finally, the need for an internal reflection scheme is explained. A realistically achievable internal reflection at the epi/substrate interface of 70% will result in a calculated increase of 3 mA/cm2 in short‐circuit current. An interfacial stack of porous silicon layers (Bragg reflectors) is chosen as a promising candidate and the challenges facing its incorporation between the epitaxial layer and the substrate are presented. Experimental work on this topic is reported and concentrates on the extraction of the internal reflection at the epi/substrate interface from reflectance measurements. Initial results show an internal reflectance between 30 and 60% with a four‐layer porous silicon stack. Resistance measurements for majority carrier flow through these porous silicon stacks are also included and show that no resistance increase is measurable for stacks up to four layers. Copyright © 2005 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR]