Search

The northern segment of the Tanlu fault zone, which encompasses the Dunhua–Mishan and Yilan–Yitong fault zones, plays a critical role in the tectonic framework of Northeast China. This study focuses on the Hunhe fault, part of the Liaoning segment of the Dunhua–Mishan fault zone, which exhibits concealed characteristics and an NE–NEE orientation. We employ remote sensing and field investigations to accurately delineate the Hunhe fault's location, scale, and tectonic activity. The findings indicate that the Hunhe fault displays significant spatial variability in tectonic activity. Some segments show evidence of late Quaternary activity, contradicting prior research that classified the Hunhe fault as an active fault during the MIS (Marine Isotope Stages) 20-103MIS 20-103- MIS6-19MIS6-19 period and assessed its seismic potential differently. Recent field investigations suggest considerable spatial variability in tectonic activity, indicating segmental characteristics. In this study, the Hunhe fault is divided into segments based on five aspects: the fault structure and movement characteristics of the fault; transverse faults and obstruction structures; geological and geomorphological characteristics; seismic features; and fault activity. The detailed segments are as follows: the Shenyang segment, the Fushun segment, the Zhangdang-Nan Zamu segment, and the Nan Zamu to Ying Emeng East section. These findings aim to enhance the understanding of the seismic hazard potential associated with the Hunhe fault, highlighting the need for ongoing research to address its complexities and implications for regional seismic risk assessment. [ABSTRACT FROM AUTHOR]

Surface unloading due to impact cratering results in lava filling the crater floor. Elevation differences in the crater floor, a common geological phenomenon on the Moon, represent direct evidence of cratering processes. However, few studies have been conducted on mare-filled craters on the Moon. Al-Biruni (81 km) is a farside impact crater with an inclined topographic profile on its floor. We quantitatively measure the morphology of Al-Biruni and model the basaltic lava emplacement to depict the cratering process. Differential subsidence due to melt cooling, wall collapse, impact conditions and structural failure were assessed as potential factors influencing the formation of the elevation differences on the floor. The results suggest that pre-impact topography is a plausible cause of the differences in floor elevation within Al-Biruni. Other factors may also play a role in this process, affecting lava flow by altering the topography of the crater floor after the impact. Thus, regardless of whether the lava inside the crater is impact-generated or comes from outside the crater, altering topography at different stages of the cratering process is an essential factor in creating the sloped terrain on the crater floor. [ABSTRACT FROM AUTHOR]

The location of the main boundary fault of the Yadong-Gulu Rift (YGR) shifts from the east side in the southern segment to the west side in the northern segment. The Nyemo Graben Group (NGG) connects the southern and northern segments of the YGR and provides clues for understanding the migration of boundary fault locations along the YGR. However, the NGG has received very little attention. In this study, we map the geometry of the Pabu normal fault, which is the boundary fault of the westernmost graben in the NGG, using high-resolution remote sensing images. We then utilized a digital elevation model (DEM) with a spatial resolution of 1 m. Morphometric parameters such as scarp height, width, and slope were obtained from elevation profiles in three typical deformation regions. Our results reveal a fault segment approximately 3 km long that links the southern and northern segments of the Pabu Fault. Each fault segment could be a major segment. Furthermore, based on regional tectonic activity, the Pabu Fault has the potential to produce an earthquake with a magnitude of around M 6.7. [ABSTRACT FROM AUTHOR]

The tectonic deformation of the southeastern margin of the Tibetan Plateau underwent significant changes before and after the Miocene, which led to the change of the deformation characteristics of the Sichuan‐Yunnan block, and some local areas in the block also showed structural patterns inconsistent with the macroscopic clockwise rotation deformation. Moreover, the Chenghai fault (CF) in the Sichuan‐Yunnan block was the seismogenic fault of the M 73/4 Yongsheng earthquake in 1515. However, the dense vegetation impeded the acquisition of surface deformation characteristics and small‐scale horizontal offsets along the fault, resulting in its misty kinematic properties, roughly determined geometric distribution, and the highly controversial rupture parameters of the Yongsheng earthquake. Therefore, we used airborne light detection and ranging, which can penetrate vegetation to obtain high‐resolution surface topography, to map the CF within 120 km. Combined with satellite images and field investigations, we determined that the CF consists of a series of secondary faults with simple geometric structures. Continuous offset linear landforms were preserved along the fault. 102 offsets below 30 m were statistically analyzed and the result revealed that the CF has a characteristic displacement of ∼6 m and it may rupture as a united rupture segment in each large earthquake or its two rupture segments cascade rupture to generate large earthquakes. The magnitude of the Yongsheng earthquake in 1515 was estimated at 7.7. Finally, based on this study, the kinematic characteristics of the Dali terrane and Sichuan‐Yunnan block, where the CF is located are discussed. Key Points: We obtained the fine geometry of the Chenghai fault (CF) and determined its kinematic propertyWe reestimated the magnitude of the Yongsheng earthquake in 1515We discussed the seismogenic pattern of the CF and kinematic characteristics of the Dali terrane and Sichuan‐Yunnan block [ABSTRACT FROM AUTHOR]

Detailed geological and geomorphological evidence has suggested that the Yilan-Yitong fault (YYF), one of the key branches of the Tancheng-Lujiang fault zone in northeastern China, has been an active fault since the Holocene that has extended from Liaoning Province to far-eastern Asia. However, there are no clear fault traces or late Quaternary active features northeast of Tangyuan County. In this study, we carried out shallow seismic reflection exploration, field geological investigation, and trench excavation across the YYF north of Tangyuan. The results revealed that the YYF is composed of two main branches: the west YYF branch is a late Pleistocene active fault, and the east one is a middle-to-early Pleistocene fault. In Heli Town, the west branch of YYF presents fault scarps with heights of ~0.6 m. Across the scarps, we excavated a trench, and we propose that the YYF displaced the late Pleistocene to Holocene deposits, as this was indicated by the geochronological data. The seismic reflection data and sedimentary sequence revealed that the YYF north of Tangyuan is composed of three tectonic belts: the western depression, the central bulge, and the eastern depression. Each tectonic belt is composed of several small folds formed from the end of the Paleogene to the beginning of the Neogene. After the Neogene, different subsidence and uplift events occurred in various parts of the YYF, and after the early Pleistocene, the fault showed a consistent subsidence. [ABSTRACT FROM AUTHOR]

The tectonic deformation on the eastern margin of the Qaidam Basin, which has preserved complete sedimentary records, significantly influences the evolutionary model of the northeastern margin of the Tibetan Plateau. However, the deformation history in this area during the Holocene remains unclear. This study is based on the high‐precision digital elevation model obtained through drone mapping technology, which identifies three active faults on the eastern margin of the Qaidam Basin: the Xiariha Fault (XRHF) and Yingdeerkang Fault Yingdeerkang Fault (YKF) are NW‒SE‐orientated dextral faults, whereas the Reshui‐Taosituohe Fault (RTF) is a nearly east‒west‐orientated sinistral fault. Based on the optically stimulated luminescence dating of the landform surfaces, the rates of strike‐slip offset are as follows: those of the XRHF range from 1.12 ± 0.07 to 1.68 ± 0.12 mm/yr and those of the YKF are from 0.99 ± 0.06 to 2.29 ± 0.13 mm/yr. Recent paleoseismic events occurred along the RTF at approximately 714–1,792 years BP and at 700 ± 18 years BP, implying a recurring millennial pattern. Together, these faults possibly form a complex cross‐fault system along the southeastern edge of the basin, heightening seismic risk. Deformation in the western part of the northeastern Tibetan Plateau is driven by slip on the Altyn Tagh Fault and compression in the Qaidam Basin. The central part experiences slip on the East Kunlun Fault, along with secondary faults, shortening, and block rotation. The eastern part primarily experiences slip along the Haiyuan Fault. Key Points: The Xiariha, Yingdeerkang, and Reshui‐Taosituohe faults (RTF) on the eastern margin of the Qaidam Basin have been active during the HoloceneThe paleoseismic recurrence interval of the RTF is estimated to be approximately 1,000 yearsThe eastern margin of the Qaidam Basin is expected to include a complex system of cross‐faults, increasing the seismic hazard [ABSTRACT FROM AUTHOR]

China's first optical stereo mapping satellite with a sub-meter resolution, GaoFen-7 (GF-7), launched in November 2019, shows significant potential for providing high-resolution topographic and geomorphic data for quantitative research on active tectonics. However, no studies have evaluated the capability of the GF-7-generated digital elevation model (DEM) for quantitatively studying active tectonics. This study aimed to validate the accuracy of the DEMs extracted from GF-7 stereo imagery, with or without ground control points (GCPs), and evaluated the potential of applying GF-7 DEMs to active tectonics. First, GF-7 stereo images were processed to obtain DEMs with a spatial resolution of 2 m, utilizing three different methods, including block adjustment without GCPs, block adjustment with the aid of Google Earth images and SRTM DEM, and block adjustment with GCPs derived from the Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) data. These three generated DEMs were called GF-7 DEMMethod1, GF-7 DEMMethod2, and GF-7 DEMMethod3, respectively, and were verified by the airborne LiDAR data in the Hasishan section of the Haiyuan fault. Second, the capability of the GF-7 DEMs for identifying active faults, fault scarps, and horizontal offsets was evaluated. Finally, 8 vertical and 13 horizontal offsets were measured based on three different GF-7 DEMs, and airborne LiDAR data were used to verify the measurements' accuracies. The results indicated that the accuracy of GF-7 DEMMethod1 was the worst and that of GF-7 DEMMethod3 was superior to that of GF-7 DEMMethod2. The GF-7 DEMs could effectively identify the apparent fault scarps and horizontal offsets. The RMSE values of the vertical offsets measured based on GF-7 DEMMethod1, GF-7 DEMMethod2, and GF-7 DEMMethod3 were 0.55 m, 0.55 m, and 0.41 m, respectively. The horizontal offsets yielded RMSE values of 3.98 m, 2.52 m, and 1.37 m, respectively. These findings demonstrated that vertical and horizontal offsets could be accurately measured using the DEMs generated from GF-7 stereo images. Meanwhile, our study indicated that the GCPs derived from ICESat-2 data could be utilized to improve the accuracies of the GF-7 DEM, and the measurements of vertical and horizontal offsets. [ABSTRACT FROM AUTHOR]

On May 22, 2021, a Mw 7.3 earthquake occurred in Maduo County, Qinghai Province with the epicenter of 34.59°N, 98.34°E. The distribution of aftershocks and surface ruptures suggested that the seismogenic structure might be the Jiangcuo fault (JF), <70 km south of East Kunlun fault (EKLF). Due to the high altitude and sparse human habitats, there are very few researches on the Jiangcuo fault, which makes us know little about the deformation features and even the geometry of Jiangcuo fault. In this study, we used the high-resolution pre-earthquake satellite images to interpret the spatial distribution and geometry of the Jiangcuo fault. Our results show that the Jiangcuo fault strikes nearly east, extending 180-km-long from Eling Lake to east of Changmahe Town. Based on the geometric features, the Jiangcuo fault could be divided into three segments characterized as the linear structures, fault valleys, scarps and systematic offset of channels. The boundary between Bayan Har Block and Qaidam Block is presented as a wide deformation zone named of Kunlun belt that is composed of East Kunlun fault and several branch faults around Anemaqen Mountain. Geometric analysis and deep lithosphere structure around Maduo County suggest that the Jiangcuo fault should be one of branch of East Kunlun fault at south, where the Kunlun fault developed as a giant flower structure. In addition, the seismic hazards potential of Jiangcuo fault should be given enough attention in the future, because west of the Jiangcuo fault, there is a rupture gap between the co-seismic surface ruptures of the 2001 Kunlun, 2021 Maduo and 1937 Huashixia Earthquakes. [ABSTRACT FROM AUTHOR]

Based on field investigations, interpretations of high‐resolution UAV images, and analyses of available InSAR data, we mapped the fault geometry and surface ruptures of the 2021 Mw 7.4 Maduo earthquake that occurred on a low‐activity strike‐slip fault within the Tibetan Plateau. The results indicate that (a) the earthquake activated a fault that is ∼161 km long and has complicated structural geometry; (b) the surface rupture occurs over a distance of 148 km, but is separated into three distinct segments by two large gaps (38 and 20 km, respectively); (c) within the surface‐rupture segments, the horizontal and vertical displacements are typically 0.2–2.6 m (much lower than the InSAR‐based slip maximum of 2–6 m at depth) and ≤0.4 m, respectively. The two large gaps of the Maduo surface rupture represent the two largest surface‐rupture discontinuities of strike‐slip earthquakes ever documented, and coincide with structurally complicated fault portions and near‐surface soft sediments. Plain Language Summary: Evaluating the seismic potential of low‐activity strike‐slip faults is commonly challenging because of (a) the difficulty in mapping of causative fault geometry that has subtle topographic expression, and (b) limited fault slip at the surface (relative to that at depth) produced by each earthquake. Our investigation of the 2021 Maduo earthquake demonstrates that, along the low‐activity strike‐slip fault, laterally significant gaps (up to 40 km wide) may separate extensive co‐seismically ruptured regions on either end of such gaps, which can thereby compromise typical methodologies used to assess paleoseismic ruptures and may lead to underestimates of seismic hazard. This observation increases the challenge of assessing the seismic potential of low‐activity strike‐slip faults. Key Points: The Maduo earthquake activated a 161‐km‐long strike‐slip fault with subtle topographic expression and complicated structural geometryThe surface rupture occurs over a distance of 148 km, but includes two large gaps that are 38 and 20 km, respectivelyWithin the surface‐rupture segments, the horizontal slip is 0.2–2.6 m, much lower than the InSAR‐based slip maximum of 2–6 m [ABSTRACT FROM AUTHOR]

Duoqing Co is a 60 km2 outflow lake in the N-trending Pagri graben, located at the southern end of the Yadong-Gulu rift in Tibet. The water in this lake suddenly disappeared between November 2015 and April 2016, closely following the Ms 8.1 (Mw 7.8) Nepal earthquake in April 2015. Both, geomorphological and remote sensing data indicate the existence of blind faults striking NNE along the east boundary of Duoqing Co lake. There were also several nearly NE-trending extensional cracks preserved in the dried lakebed, apparently formed in response to creeping deformation of the underlying rock. Based on field studies and analysis of meteorological and remote sensing data, it is suggested that this phenomenon cannot be explained by evaporation linked to climate change nor can it be related to human activity. Instead, it is considered that the lake water drained through the extensional cracks formed in the lakebed as it responded to the far-field effects of the 2015 Nepal earthquake. It is proposed that a shift in regional tectonics occurred as a result of the Nepal earthquake, causing a sharp increase in stress accumulation along the seismically locked Bhutan–Sikkim zone on the Main Himalayan Thrust (MHT) fault, which was accommodated by the extension of the Pagri graben in the southern Yadong-Gulu rift. It is believed that the crust may have reached a critical stress-state that resulted in strain hardening and brittle failure throughout the region along the Bhutan–Sikkim segment of the MHT. If so, considering the high potential for tectonic activity along the segment of the MHT, it may be worth paying attention to deformational changes and potential geomorphological precursors that might appear in the seismically locked Bhutan–Sikkim gap to predict future earthquakes. [ABSTRACT FROM AUTHOR]

The seismic effects in Nyalam, Gyirong, Tingri and Dinggye counties along the southern border of Tibet were investigated during 2–8 May 2015, a week after the great Nepal earthquake along the Main Himalaya Thrust. The intensity was VIII in the region and reached IX at two towns on the Nepal border, resulting in the destruction of 2700 buildings, seriously damaging over 40 000 others, while killing 27 people and injuring 856 in this sparsely populated region. The main geologic effects in this steep rugged region are collapses, landslides, rockfalls, and ground fissures, many of which are reactivations of older land slips. These did great damage to the buildings, roads, and bridges in the region. Most of the effects are along four incised valleys which are controlled by N-trending rifts and contain rivers that pass through the Himalaya Mountains and flow into Nepal; at least two of the larger aftershocks occurred along the normal faults. And, the damage is not related to the faulting of N-trending rifts but rather is distributed along the intensity of Nepal earthquake. Areas weakened by the earthquake pose post-seismic hazards. Another main characteristic of damage is the recurrence of the old landslide and rockfalls. In addition, there is an increased seismic hazard along active N-trending grabens in southern Tibet due to the shift in stress resulting from the thrust movement that caused the Nepal earthquake. NW-trending right-lateral strike-slip faults also may be susceptible to movement. The results of the findings are incorporated in some principle recommendations for the repair and reconstruction after the earthquake. [ABSTRACT FROM AUTHOR]

The north trending rifts in southern Tibet represent the E–W extension of the plateau and confirming the initial rifting age is key to the study of mechanics of these rifts. Pagri–Duoqing Co graben is located at southern end of Yadong–Gulu rift, where the late Cenozoic sediments is predominately composed of fluvio‐lacustrine and moraine. Based on the sedimentary composition and structures, the fluvio‐lacustrine could be divided into three facies, namely, lacustrine, lacustrine fan delta and alluvial fan. The presence of paleo‐currents and conglomerate components and the provenance of the strata around the graben indicate that it was Tethys Himalaya and High Himalaya. Electron spin resonance (ESR) dating and paleo‐magnetic dating suggest that the age of the strata ranges from ca. 1.2 Ma to ca. 8 Ma. Optically stimulated luminescence (OSL) dating showed that moraine in the graben mainly developed from around 181–109 ka (late Middle Pleistocene). Combining previous data about the Late Cenozoic strata in other basins, it is suggested that 8–15 Ma may be the initial rifting time. Together with sediment distribution and drainage system, the sedimentary evolution of Pagri could be divided into four stages. The graben rifted at around 15–8 Ma due to the eastern graben‐boundary fault resulting in the appearance of a paleolake. Following by a geologically quiet period about 8–2.5 Ma, the paleolake expanded from east to west at around 8–6 Ma reaching its maximum at ca. 6 Ma. Then, the graben was broken at about 2.5 Ma. At last, the development of the glacier separated the graben into two parts that were Pagri and Duoqing Co since the later stages of the Middle Pleistocene. The evolution process suggested that the former three stages were related to the tectonic movement, which determined the basement of the graben, while the last stage may have been influenced by glacial activity caused by climate change. [ABSTRACT FROM AUTHOR]

New Discovery of Surface Rupture of Large Paleo-Earthquake along Northern Pagri-Duoqing Co Graben, Southern Yadong-Gulu Rift. [Extracted from the article]

The article presents a study which discusses evidence of the initial rifting age of the nearly N-S rifts in Southern Tibetan Plateau. Topics include geological profiling survey about the lacustrine sediments, oldest outcrop as a set of lacustrine and fluvial sediments, and chronological results of sediments in the Qiongduojiang basin.