Search

Determining reliable cable ampacities for marine High Voltage Cables is currently the subject of significant industry and academic reassessment in order to optimize (maximizing load while maintaining safe operating temperatures) design and reduce costs. Ampacity models can be elaborate, and inaccuracies are increasingly predicated on the uncertainty in environmental inputs. A stark example is the role of ambient temperature at cable depth, which, due to the scale of cables and the inaccessibility of the seafloor, is commonly estimated at 15 °C. Oceanographic models incorporating ocean bottom temperature are increasingly available, and they achieve coverage and spatiotemporal resolutions for cable applications without the requirement for project specific measurements. Here, a rudimental validation of the AMM15 and AMM7 mean monthly ocean bottom temperature models for the NW European Shelf indicates encouraging accuracies (MBE ≤ 1.48 °C; RMSE ≤ 2.2 °C). A series of cable case studies are used to demonstrate that cable ratings can change between −4.1% and +7.8% relative to ratings based on a common static (15 °C) ambient temperature value. Consideration of such variations can result in both significant ratings (and hence capital expenditure and operating costs) gains and/or the avoidance of cable overheating. Consequently, validated modelled ocean bottom temperatures are deemed sufficiently accurate, providing incomparable coverage and spatiotemporal resolutions of the whole annual temperature signal, thereby facilitating much more robust ambient temperatures and drastically improving ampacity estimates. [ABSTRACT FROM AUTHOR]

Seismic activity in the Lesser Antilles (LA) is characterized by strong regional variability along the arc reflecting the complex subduction setting and history. Although routine seismicity monitoring can rely on an increasing number of island stations, the island-arc setting means that high-resolution monitoring and detailed studies of fault structures require a network of ocean bottom seismometers (OBS). As part of the 2016–2017 Vo lat i le recycling at the L esser A ntilles arc (VoiLA) project, we deployed 34 OBS stations in the forearc and backarc. During the deployment time, 381 events were recorded within the subduction zone. In this paper, we perform full-waveform regional moment tensor (RMT) inversions, to gain insight into the stress distribution along the arc and at depth. We developed a novel inversion approach, AmΦB—'Amphibious Bayesian', taking into account uncertainties associated with OBS deployments. Particularly, the orientation of horizontal components (alignment uncertainty) and the high noise level on them due to ocean microseisms are accounted for using AmΦB. The inversion is conducted using a direct, uniform importance sampling of the fault parameters within a multidimensional tree structure: the uniXtree-sampling algorithm. We show that the alignment of the horizontal OBS components, particularly in high noise level marine environments, influences the obtained source mechanism when using standard least-squares (L2) RMT inversion schemes, resulting in systematic errors in the recovered focal mechanisms including high artificial compensated linear vector dipole (CLVD) contributions. Our Bayesian formulation in AmΦB reduces these CLVD components by nearly 60 per cent and the aberration of the focal geometry as measured by the Kagan angle by around 40 per cent relative to a standard L2 inversion. Subsequently, we use AmΦB-RMT to obtain 45 (M w > 3.8) regional MT solutions, out of which 39 are new to any existing database. Combining our new results with existing solutions, we subsequently analyse a total of 151 solutions in a focal mechanism classification (FMC) diagram and map them to the regional tectonic setting. We also use our newly compiled RMT database to perform stress tensor inversions along the LA subduction zone. On the plate interface, we observe the typical compressional stress regime of a subduction zone and find evidence for upper-plate strike slip and normal fault behaviour in the north that becomes a near arc-perpendicular extensional stress regime towards the south. A dominant slab perpendicular extensional stress regime is found in the slab at 100–200 km beneath the central part of the arc. We interpret this stress condition to be a result of slab pull varying along the arc due to partial slab detachment along previously hypothesized lateral slab tear near Grenada, at the southern end of the LA arc, leading to reactivation of pre-existing structures around the subducted Proto-Caribbean ridge. [ABSTRACT FROM AUTHOR]

The margins of the Caribbean and associated hazards and resources have been shaped by a poorly understood history of subduction. Using new data, we improve teleseismic P-wave imaging of the eastern Caribbean upper mantle and compare identified subducted-plate fragments with trench locations predicted from plate reconstruction. This shows that material at 700–1200 km depth below South America derives from 90–115 Myr old westward subduction, initiated prior to Caribbean Large-Igneous-Province volcanism. At shallower depths, an accumulation of subducted material is attributed to Great Arc of the Caribbean subduction as it evolved over the past 70 Ma. We interpret gaps in these subducted-plate anomalies as: a plate window and tear along the subducted Proto-Caribbean ridge; tearing along subducted fracture zones, and subduction of a volatile-rich boundary between Proto-Caribbean and Atlantic domains. Phases of back-arc spreading and arc jumps correlate with changes in age, and hence buoyancy, of the subducting plate. Seismic imaging of subducted plates offers a way to improve plate tectonic reconstructions. Here, Braszus et al. use new ocean-bottom seismometer data from the Lesser Antilles to locate subducted spreading centres and faults thus providing a new understanding of the evolution of the Caribbean plate. [ABSTRACT FROM AUTHOR]

Oceanic lithosphere carries volatiles, notably water, into the mantle through subduction at convergent plate boundaries. This subducted water exercises control on the production of magma, earthquakes, formation of continental crust and mineral resources. Identifying different potential fluid sources (sediments, crust and mantle lithosphere) and tracing fluids from their release to the surface has proved challenging1. Atlantic subduction zones are a valuable endmember when studying this deep water cycle because hydration in Atlantic lithosphere, produced by slow spreading, is expected to be highly non-uniform2. Here, as part of a multi-disciplinary project in the Lesser Antilles volcanic arc3, we studied boron trace element and isotopic fingerprints of melt inclusions. These reveal that serpentine—that is, hydrated mantle rather than crust or sediments—is a dominant supplier of subducted water to the central arc. This serpentine is most likely to reside in a set of major fracture zones subducted beneath the central arc over approximately the past ten million years. The current dehydration of these fracture zones coincides with the current locations of the highest rates of earthquakes and prominent low shear velocities, whereas the preceding history of dehydration is consistent with the locations of higher volcanic productivity and thicker arc crust. These combined geochemical and geophysical data indicate that the structure and hydration of the subducted plate are directly connected to the evolution of the arc and its associated seismic and volcanic hazards. Serpentine subducted below the Lesser Antilles volcanic arc supplies water to the arc, controlling the location of seismicity, volcanic productivity and thickness of crust. [ABSTRACT FROM AUTHOR]

Estimating the location of geologic and tectonic features on a subducting plate is important for interpreting their spatial relationships with other observables including seismicity, seismic velocity and attenuation anomalies, and the location of ore deposits and arc volcanism in the over-riding plate. Here we present two methods for estimating the location of predictable features such as seamounts, ridges and fracture zones on the slab. One uses kinematic reconstructions of plate motions, and the other uses multidimensional scaling to flatten the slab onto the surface of the Earth. We demonstrate the methods using synthetic examples and also using the test case of fracture zones entering the Lesser Antilles subduction zone. The two methods produce results that are in good agreement with each other in both the synthetic and real examples. In the Lesser Antilles, the subducted fracture zones trend northwards of the surface projections. The two methods begin to diverge in regions where the multidimensional scaling method has its greatest likely error. Wider application of these methods may help to establish spatial correlations globally. [ABSTRACT FROM AUTHOR]

The Sumatran subduction zone exhibits strong seismic and tsunamogenic potential with the prominent examples of the 2004, 2005 and 2007 earthquakes. Here, we invert travel-time data of local earthquakes for vp and vp=vs velocity models of the central Sumatran forearc. Data were acquired by an amphibious seismometer network consisting of 52 land stations and 10 ocean-bottom seismometers located on a segment of the Sumatran subduction zone that had not ruptured in a great earthquake since 1797 but witnessed recent ruptures to the north in 2005 (Nias earthquake, Mw D 8:7) and to the south in 2007 (Bengkulu earthquake, Mw D 8:5). The 2-D and 3-D vp velocity anomalies reveal the downgoing slab and the sedimentary basins. Although the seismicity pattern in the study area appears to be strongly influenced by the obliquely subducting Investigator Fracture Zone to at least 200 km depth, the 3-D velocity model shows prevailing trench-parallel structures at depths of the plate interface. The tomographic model suggests a thinned crust below the basin east of the forearc islands (Nias, Pulau Batu, Siberut) at ~180 km distance to the trench. vp velocities beneath the magmatic arc and the Sumatran fault zone (SFZ) are around 5 km s-1 at 10 km depth and the vp=vs ratios in the uppermost 10 km are low, indicating the presence of felsic lithologies typical for continental crust. We find moderately elevated vp=vs values of 1.85 at ~150 km distance to the trench in the region of the Mentawai Fault. vp=vs ratios suggest an absence of large-scale alteration of the mantle wedge and might explain why the seismogenic plate interface (observed as a locked zone from geodetic data) extends below the continental forearc Moho in Sumatra. Reduced vp velocities beneath the forearc basin covering the region between the Mentawai Islands and the Sumatra mainland possibly reflect a reduced thickness of the overriding crust. [ABSTRACT FROM AUTHOR]

The Sumatran subduction zone exhibits strong seismic and tsunamogenic potential with the prominent examples of the 2004, 2005 and 2007 earthquakes. Here, we invert travel time data of local earthquakes for vp and vp/vs velocity models of the central Sumatran forearc. Data were acquired by an amphibious seismometer network consisting of 52 land stations and 10 ocean bottom seismometers located on a segment of the Sumatran subduction zone that had not ruptured in a great earthquake since 1797 but witnessed recent ruptures to the north in 2005 (Nias earthquake, Mw=8.7) and to the south in 2007 (Bengkulu earthquake, Mw=8.5). 2D and 3D vp velocity anomalies reveal the downgoing slab and the sedimentary basins. Although the seismicity pattern in the study area appears to be strongly influenced by the obliquely subducting Investigator Fracture Zone to at least 200 km depth, the 3D velocity model shows prevailing trench parallel structures at depths of the plate interface. The tomographic model suggests a thinned crust below the basin east of the forearc islands (Nias, Pulau Batu, Siberut) at ~ 180 km distance to the trench. Vp velocities beneath the magmatic arc and the Sumatran fault zone SFZ are around 5 km/s at 10 km depth and the vp/vs ratios in the uppermost 10 km are low, indicating the presence of felsic lithologies typical for continental crust. We find moderately elevated vp/vs values of 1.85 at ~ 150 km distance to the trench in the region of the Mentawai fault. Vp/vs ratios suggest absence of large scale alteration of the mantle wedge and might explain why the seismogenic plate interface (observed as a locked zone from geodetic data) extends below the continental forearc Moho in Sumatra. Reduced vp velocities beneath the forearc basin covering the region between Mentawai Islands and the Sumatra mainland possibly reflect a reduced thickness of the overriding crust. [ABSTRACT FROM AUTHOR]

In the North Atlantic Ocean, a mid-ocean ridge bisects the Icelandic mantle plume, and provides a window into its temporal evolution. V-shaped ridges of thick oceanic crust observed south of Iceland are thought to record pulses of upwelling within the plume. Specifically, excess crust is thought to form during the quasi-periodic generation of hot solitary waves triggered by thermal instabilities in the mantle. Here we use seismic reflection data to show that V-shaped ridges have formed over the past 55 million years-providing the longest record of plume periodicity of its kind. We find evidence for minor, but systematic, asymmetric formation of crust, due to migration of the mid-ocean ridge with respect to the underlying plume. We also find changes in periodicity: from 55 to 35 million years ago, the V-shaped ridges form every 3 million years or so and reflect small fluctuations in plume temperature of about 5-10 °C. From 35 million years ago, the periodicity changes to about 8 million years and reflects changes in mantle temperature of 25-30 °C. We suggest that this change in periodicity is probably caused by perturbations in the thermal state at the plume source, either at the mantle-transition zone or core-mantle boundary. [ABSTRACT FROM AUTHOR]

Chirp sub-bottom profilers are marine sonar systems which use a highly repeatable source signature to facilitate the acquisition of correlated data with decimetre vertical resolution in the top 20–30 m of sediments. Source signatures can be readily developed and implemented, but an applicable methodology for assessing resolution and attenuation characteristics of these wide-band systems did not exist. Methodologies are developed and applied to seven contrasting source signatures which occupy the same frequency band, but differ in their Envelope and Instantaneous Frequency functions. For the Chirp source signatures tested, a Sine-Squared envelope function is shown to produce seismic data with the optimum resolution and penetration characteristics. [ABSTRACT FROM AUTHOR]

An amendment to this paper has been published and can be accessed via a link at the top of the paper. [ABSTRACT FROM AUTHOR]