Search

Background: There are no proven radiographic guidelines for predicting fracture risk in children and young adults with a benign skeletal lesion. An in vivo diagnostic study was conducted to determine whether a reduction in the load-carrying capacity of a bone measured with quantitative computed tomography was more accurate than current radiographic guidelines for predicting pathologic fracture in patients with a benign skeletal lesion.Methods: Eighteen patients who presented with a fracture through a benign skeletal lesion were compared with eighteen patients who had a benign skeletal lesion that had been thought to be at increased risk for fracture on the basis of currently used radiographic criteria but had not fractured over a two-year period. Structural analysis was performed to calculate the resistance of the affected bones to compressive, bending, and torsional loads with use of serial transaxial quantitative computed tomography data obtained along the length of the bone containing the lesion and from homologous cross sections through the contralateral, normal bone. At each cross section, the ratio of the structural rigidity of the affected bone divided by that of the normal, contralateral bone was determined. The cross section with the greatest reduction in compressive, bending, and torsional rigidity was identified as that most likely to fracture.Results: The mean age (and standard deviation) of the thirty-six patients was 12.5 +/- 3.6 years. Twenty lesions were located in the femur; eleven, in the tibia; three, in the humerus; one, in the ulna; and one, in the pelvis. A combination of the minimum bending and torsional rigidities calculated from the tomographic data provided optimal performance in differentiating between the fracture and non-fracture groups (100% sensitivity and 94% specificity). In contrast, plain radiographic criteria demonstrated 28% to 83% sensitivity and 6% to 78% specificity.Conclusions: The combination of bending and torsional rigidity measured noninvasively with quantitative computed tomography was more accurate (97%) for predicting pathologic fracture through benign bone lesions in children than were standard radiographic criteria (42% to 61% accuracy). We believe that this method can provide accurate objective criteria for planning treatment of benign bone lesions and monitoring treatment response. [ABSTRACT FROM AUTHOR]

Twenty-seven paired human cadaveric knee specimens were used to determine the effect of surgical technique and various interference screw parameters on the pullout strength of patellar tendon femoral bone blocks. The study compared the fixation strength of endoscopically inserted and conventional 'rear-entry' screws of different mode of failure was bone block pullout from the interference screw. There was no significant difference in fixation strength between 9-mm diameter screws inserted through a conventional rear-entry technique and 7-mm diameter screws inserted through an endoscopic technique. There was no significant effect of screw length on fixation strength. The pullout force for 20-mm long screws were compared with 5.5-mm diameter screws. There was no significant effect of increased screw core diameter on fixation strength. There was a weak positive correlation (r squared = 0.45) between screw insertion torque and pullout force. Our measured mean pullout force for the 7-mm endoscopically inserted screws of 362 + or - 198 N represents 20.1% of the failure load of the normal young adult anterior cruciate ligament. Our data indicate that properly inserted 7-mm diameter endoscopic interference screws can provide fixation strengths of patellar tendon anterior cruciate ligament grafts equivalent to those of conventional 9-mm diameter rear-entry, outside-in screws. [ABSTRACT FROM AUTHOR]