Search

Objective: Black poplar (Populus nigra L.) is a species native to Eurasia with a wide distribution area. It is an ecologically important species from riparian ecosystems, that is used as a parent of interspecific (P. deltoides x P. nigra) cultivated poplar hybrids. Variant detection from transcriptomics sequences of 241 P. nigra individuals, sampled in natural populations from 11 river catchments (in four European countries) is described here. These data provide new valuable resources for population structure analysis, population genomics and genome-wide association studies. Data description: We generated transcriptomics data from a mixture of young differentiating xylem and cambium tissues of 480 Populus nigra trees sampled in a common garden experiment located at Orléans (France), corresponding to 241 genotypes (2 clonal replicates per genotype, at maximum) by using RNAseq technology. We launched on the resulting sequences an in-silico pipeline that allowed us to obtain 878,957 biallelic polymorphisms without missing data. More than 99% of these positions are annotated and 98.8% are located on the 19 chromosomes of the P. trichocarpa reference genome. The raw RNAseq sequences are available at the NCBI Sequence Read Archive SPR188754 and the variant dataset at the Recherche Data Gouv repository under https://doi.org/10.15454/8DQXK5. [ABSTRACT FROM AUTHOR]

Wood is a complex tissue that fulfills three major functions in trees: water conduction, mechanical support and nutrient storage. In Angiosperm trees, vessels, fibers and parenchyma rays are respectively assigned to these functions. Cell wall composition and structure strongly varies according to cell type, developmental stages and environmental conditions. This complexity can therefore hinder the study of the molecular mechanisms of wood formation, underlying the construction of its properties. However, this can be circumvented thanks to the development of cell-specific approaches and microphenotyping. Here, we present a non-destructive microphenotyping method based on attenuated total reflectance–Fourier transformed infrared (ATR-FTIR) microspectroscopy. We applied this technique to three types of poplar wood: normal wood of staked trees (NW), tension and opposite wood of artificially tilted trees (TW, OW). TW is produced by angiosperm trees in response to mechanical strains and is characterized by the presence of G fibers, exhibiting a thick gelatinous extra-layer, named G-layer, located in place of the usual S2 and/or S3 layers. By contrast, OW located on the opposite side of the trunk is totally deprived of fibers with G-layers. We developed a workflow for hyperspectral image analysis with both automatic pixel clustering according to cell wall types and identification of differentially absorbed wavenumbers (DAWNs). As pixel clustering failed to assign pixels to ray S-layers with sufficient efficiency, the IR profiling and identification of DAWNs were restricted to fiber and vessel cell walls. As reported elsewhere, this workflow identified cellulose as the main component of the G-layers, while the amount in acetylated xylans and lignins were shown to be reduced. These results validate ATR-FTIR technique for in situ characterization of G layers. In addition, this study brought new information about IR profiling of S-layers in TW, OW and NW. While OW and NW exhibited similar profiles, TW fibers S-layers combined characteristics of TW G-layers and of regular fiber S-layers. Unexpectedly, vessel S-layers of the three kinds of wood showed significant differences in IR profiling. In conclusion, ATR-FTIR microspectroscopy offers new possibilities for studying cell wall composition at the cell level. [ABSTRACT FROM AUTHOR]

Main conclusion : RG-I and AGP, but not XG, are associated to the building of the peculiar mechanical properties of tension wood. Hardwood trees produce tension wood (TW) with specific mechanical properties to cope with environmental cues. Poplar TW fibers have an additional cell wall layer, the G-layer responsible for TW mechanical properties. We investigated, in two poplar hybrid species, the molecules potentially involved in the building of TW mechanical properties. First, we evaluated the distribution of the different classes of non-cellulosic polysaccharides during xylem fiber differentiation, using immunolocalization. In parallel, G-layers were isolated and their polysaccharide composition determined. These complementary approaches provided information on the occurrence of non-cellulosic polysaccharides during G-fiber differentiation. We found no evidence of the presence of xyloglucan (XG) in poplar G-layers, whereas arabinogalactan proteins (AGP) and rhamnogalacturonan type I pectins (RG-I) were abundant, with an apparent progressive loss of RG-I side chains during G-layer maturation. Similarly, the intensity of immunolabeling signals specific for glucomannans and glucuronoxylans varies during G-layer maturation. RG-I and AGP are best candidate matrix components to be responsible for TW mechanical properties. [ABSTRACT FROM AUTHOR]

Xylem resistance to drought-induced cavitation is a key trait of plant water relations. This study assesses the genetic variation expressed for stem cavitation resistance within a population of a riparian species, the European black poplar (Populus nigra L.), and explores its relationships with xylem anatomy, water-use efficiency (WUE), and growth. Sixteen structural and physiological traits related to cavitation resistance, xylem anatomy, growth, bud phenology, and WUE were measured on 33 P. nigra genotypes grown under optimal irrigation in a 2-year-old clonal experiment in a nursery. Significant genetic variation was expressed for the xylem tension inducing 50% loss of hydraulic conductivity (Ψ50) within the studied population, as attested by the high value of broad-sense heritability estimated for this trait (H²ind = 0.72). Stem cavitation resistance was associated with xylem structure: the more cavitation-resistant genotypes exhibited lower hydraulic efficiency and higher mechanical reinforcement as assessed from stem xylem cross sections. By contrast, Ψ50 was not significantly related to shoot height increment, total above-ground dry mass, or bulk leaf carbon isotope discrimination, a proxy for intrinsic WUE. These findings indicate that the trade-offs between xylem resistance to cavitation, hydraulic efficiency, and mechanical reinforcement can occur at the within-population level. Given that the studied genotypes were exposed to the same environmental conditions and evolutionary drivers in situ, the trade-offs detected at this scale are expected to reflect true functional relationships. [ABSTRACT FROM AUTHOR]

REALLY INTERESTING NEW GENE ( RING) proteins play important roles in the regulation of many processes by recognizing target proteins for ubiquitination. Previously, we have shown that the expression of Pta RHE1, encoding a Populus tremula × Populus alba RING-H2 protein with E3 ubiquitin ligase activity, is associated with tissues undergoing secondary growth. To further elucidate the role of Pta RHE1 in vascular tissues, we have undertaken a reverse genetic analysis in poplar. Within stem secondary vascular tissues, Pta RHE1 and its corresponding protein are expressed predominantly in the phloem. The downregulation of Pta RHE1 in poplar by artificial mi RNA triggers alterations in phloem fibre patterning, characterized by an increased portion of secondary phloem fibres that have a reduced cell wall thickness and a change in lignin composition, with lower levels of syringyl units as compared with wild-type plants. Following an RNA-seq analysis, a biological network involving hormone stress signalling, as well as developmental processes, could be delineated. Several candidate genes possibly associated with the altered phloem fibre phenotype observed in ami RPta RHE1 poplar were identified. Altogether, our data suggest a regulatory role for Pta RHE1 in secondary phloem fibre development. [ABSTRACT FROM AUTHOR]

Trees can control their shape and resist gravity thanks to their ability to produce wood under tensile stress. This stress is known to be produced during the maturation of wood fibres but the mechanism of its generation remains unclear. This study focuses on the formation of the secondary wall in tension wood produced in artificially tilted poplar saplings. Thickness of secondary wall layer (SL) and gelatinous layer (GL) were measured from cambium to mature wood in several trees sampled at different times after tilting. Measurements on wood fibres produced before tilting show the progressive increase of secondary wall thickness during the growing season. After the tilting date, SL thickness decreased markedly from normal wood to tension wood while the total thickness increased compared to normal wood, with the development of a thick GL. However, even after GL formation, SL thickness continues to increase during the growing season. GL thickening was observed to be faster than SL thickening. The development of the unlignified GL is proposed to be a low cost, efficient strategy for a fast generation of tensile stress in broadleaved trees. [ABSTRACT FROM AUTHOR]

The lignification process in poplar tension wood lignified cell wall layers, specifically the S1 and S2 layers and the compound middle lamella (CML), was analysed using ultraviolet (UV) and transmission electron microscopy (TEM). Variations in the thickness of the gelatinous layer (G-layer) were also measured to clarify whether the lignified cell wall layers had completed their lignification before the deposition of G-layers, or, on the contrary, if lignification of these layers was still active during G-layer formation. Observations using UV microscopy and TEM indicated that both UV absorbance and the degree of potassium permanganate staining increased in the CML and S1 and S2 layers during G-layer formation, suggesting that the lignification of these lignified layers is still in progress during G-layer formation. In the context of the cell-autonomous monolignol synthesis hypothesis, our observations suggest that monolignols must go through the developing G-layer during the lignification of CML and the S1 and S2 layers. The alternative hypothesis of external synthesis (in the rays) does not require that monolignols go through the G-layer before being deposited in the CML, or the S1 and S2 layers. Interestingly, the previous observation of lignin in the poplar G-layer was not confirmed with the microscopy techniques used in the present study. [ABSTRACT FROM AUTHOR]

We examined the relationships between xylem resistance to cavitation and 16 structural and functional traits across eight unrelated Populus deltoides× Populus nigra genotypes grown under two contrasting water regimes. The xylem water potential inducing 50% loss of hydraulic conductance ( Ψ50) varied from −1.60 to −2.40 MPa. Drought-acclimated trees displayed a safer xylem, although the extent of the response was largely genotype dependant, with Ψ50 being decreased by as far as 0.60 MPa. At the tissue level, there was no clear relationship between xylem safety and either xylem water transport efficiency or xylem biomechanics; the only structural trait to be strongly associated with Ψ50 was the double vessel wall thickness, genotypes exhibiting a thicker double wall being more resistant. At the leaf level, increased cavitation resistance was associated with decreased stomatal conductance, while no relationship could be identified with traits associated with carbon uptake or bulk leaf carbon isotope discrimination, a surrogate of intrinsic water-use efficiency. At the whole-plant level, increased safety was associated with higher shoot growth potential under well-irrigated regime only. We conclude that common trade-offs between xylem resistance to cavitation and other physiological traits that are observed across species may not necessarily hold true at narrower scales. [ABSTRACT FROM AUTHOR]

Six Populus deltoides Bartr. ex Marsh. × P. nigra L. genotypes were selected to investigate whether stem xylem anatomy correlated with gas exchange rates, water-use efficiency (WUE) and growth performance. Clonal copies of the genotypes were grown in a two-plot common garden test under contrasting water regimes, with one plot maintained irrigated and the other one subjected to moderate summer water deficit. The six genotypes displayed a large range of xylem anatomy, mean vessel and fibre diameter varying from about 40 to 60 μm and from 7.5 to 10.5 μm, respectively. Decreased water availability resulted in a reduced cell size and an important rise in vessel density, but the extent of xylem plasticity was both genotype and trait dependent. Vessel diameter and theoretical xylem-specific hydraulic conductivity correlated positively with stomatal conductance, carbon isotope discrimination and growth performance-related traits and negatively with intrinsic WUE, especially under water deficit conditions. Vessel diameter and vessel density measured under water deficit conditions correlated with the relative losses in biomass production in response to water deprivation; this resulted from the fact that a more plastic xylem structure was generally accompanied by a larger loss in biomass production. [ABSTRACT FROM PUBLISHER]

Copyright of Canadian Journal of Forest Research is the property of Canadian Science Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

• Fifteen poplar cDNA encoding fasciclin-like arabinogalactan proteins (PopFLAs) were finely characterized, whereas the presence of arabinogalactan proteins (AGPs) was globally assessed during wood formation. • PopFLAs transcript accumulation was analysed through EST distribution in cDNA libraries, semi-quantitative RT-PCR, microarray experiment and Northern blot analysis. Similarly, AGPs contents were globally quantified by rocket electrophoresis. AGPs accumulation was further examined by Western blotting and immunocytolocalization. • Ten PopFLAs were specifically expressed in tension wood (TW) and not expressed in the cambial zone. Rocket electrophoresis revealed important AGPs accumulation in TW xylem. An anti-AGPs specific antibody recognized two proteins preferentially present in the cell wall-bound fraction from TW. Immunocytochemistry revealed a strong labelling close to the inner part of the G-layer of TW fibres. • PopFLAs are expressed in xylem and many are up-regulated in TW. It is suggested that some PopFLAs accumulating at the inner side of the G-layer may have a specific function in the building of this layer. PopFLAs expression may therefore be linked to the specific mechanical properties of TW. New Phytologist (2004) 164: 107–121 © New Phytologist (2004) doi: 10.1111/j.1469-8137.2004.01175.x [ABSTRACT FROM AUTHOR]

Wood is a complex and highly variable tissue, the formation of which is developmentally and environmentally regulated. In reaction to gravitropic stimuli, angiosperm trees differentiate tension wood, a wood with specific anatomical, chemical and mechanical features. In poplar the most significant of these features is an additional layer that forms in the secondary wall of tension wood fibres. This layer is mainly constituted of cellulose microfibrils oriented nearly parallel to the fibre axis. Tension wood formation can be induced easily and strongly by bending the stem of a tree. Located at the upper side of the bent stem, tension wood can be compared with the wood located on its lower side. Therefore tension wood represents an excellent model for studying the formation of xylem cell walls. This review summarizes results recently obtained in the field of genomics on tension wood. In addition, we present an example of how the application of functional genomics to tension wood can help decipher the molecular mechanisms responsible for cell wall characteristics such as the orientation of cellulose microfibrils. New Phytologist (2004) doi: 10.1111/j.1469-8137.2004.01176.x © New Phytologist (2004) [ABSTRACT FROM AUTHOR]

The article provides information on the use of fourier transform infrared spectroscopy for plant cell wall of wood of poplars, chemotypes and water conduction from roots to crown. Topics include cellulose polysaccharides of plants, angiosperm trees producing tension wood and cell specific microphenotyping.

Until recently, the roles of plant MADS-box genes have mainly been characterized during inflorescence and flower differentiation. In order to precise the roles of AGAMOUS-LIKE 12, one of the few MADS-box genes preferentially expressed in roots, we placed its cDNA under the control of the double 35S CaMV promoter to produce transgenic walnut tree and Arabidopsis plants. In Juglans sp., transgenic somatic embryos showed significantly higher germination rates but abnormal development of their shoot apex prevented their conversion into plants. In addition, a wide range of developmental abnormalities corresponding to ectopic root-like structures affected the transgenic lines suggesting partial reorientations of the embryonic program toward root differentiation. In Arabidopsis, AtAGL12 overexpression lead to the production of faster growing plants presenting dramatically wider and shorter root phenotypes linked to increased meristematic cell numbers within the root apex. In the upper part of the roots, abnormal cell divisions patterns within the pericycle layer generated large ectopic cell masses that did not prevent plants to grow. Taken together, our results confirm in both species that AGL12 positively regulates root meristem cell division and promotes overall root vascular tissue formation. Genetic engineering of AGL12 expression levels could be useful to modulate root architecture and development. [ABSTRACT FROM AUTHOR]

In insects, the gall-inducing life-style has evolved independently many times. Several evolutionary pathways leading to this lifestyle have been proposed. While there is compelling evidence supporting surface-feeders and stem-borers as ancestral states of insect gall-inducers, an evolutionary pathway from leaf-miners remains hypothetical. Here we explored this question by comparing the developmental processes of two micromoths, a gall-inducer Caloptilia cecidophora (Lep., Gracillariidae), and its non-gall-inducing relative C. ryukyuensis. Like other Caloptilia, the first and second instars of C. cecidophora are leaf-miners and the gall is initiated inside the leaf mine by the third instar, thus suggesting leaf-mining as an ancestral, plesiomorphic state in this case. This is the first example of an insect species switching from leaf-mining to gall-inducing during larval development. The first two leaf-mining instars of C. cecidophora exhibit an absence of growth and a reduced time duration compared to C. ryukyuensis. The shortening of the duration of leaf-mining stages is apparently compensated in C. cecidophora by a larger egg size than C. ryukyuensis, and an additional larval instar during the gall phase. [ABSTRACT FROM AUTHOR]

An abstract of the conference paper "Toward identifying molecules responsible for the peculiar properties of the G-layer in tension wood fibres," by Fernanda Guedes and colleagues is presented.