Search

Although air quality guidelines generally use the atmospheric concentration of fine particulate matter (PM 2.5) as a metric for air pollution evaluation and management, the fact cannot be ignored that different particle toxicities are unequal and significantly related to their sources and chemical compositions. Therefore, judging the most harmful source and identifying the toxic component would be helpful for optimizing air quality standards and prioritizing targeted PM 2.5 control strategies to protect public health more effectively. Since the combustions of fuels, including oil, coal, and biomass, are the main anthropogenic sources of environmental PM 2.5 , their discrepant contributions to health risks of mixed ambient aerosol pollution dominated by the respective emission intensity and unequal toxicity of chemical components need to be identified. In order to quantify the differences between these combustion primary emissions, 10 types of PM 2.5 from each typical source group, i.e., vehicle exhaust, coal combustion, and plant biomass (domestic biofuel) burning, were collected for comparative study with toxicological mechanisms. In total, 30 types of individual combustion samples were intercompared with representative urban ambient air PM 2.5 samples, whose chemical characteristics and biological effects were investigated by component analysis (carbon, metals, soluble ions) and in vitro toxicity assays (cell viability, oxidative stress, inflammatory response) of human lung adenocarcinoma epithelial cells (A549). Carbonaceous fractions were plenteous in automobile exhaust and biomass burning, while heavy metals were more plentiful in PM 2.5 from coal combustion and automobile exhaust. The overall ranking of mass-normalized cytotoxicity for source-specific PM 2.5 was automobile exhaust > coal combustion > domestic plant biomass burning > ambient urban air, possibly with differential toxicity triggers, and showed that the carbonaceous fractions (organic carbon, OC; elemental carbon, EC) and redox-active transition metals (V, Ni, Cr) assisted by water-soluble ions (Ca 2+ , Mg 2+ , F - , Cl -) might play important roles in inducing cellular reactive organic species (ROS) production, causing oxidative stress and inflammation, resulting in cell injury and apoptosis, and thus damaging human health. Coupled with the source apportionment results of typical urban ambient air PM 2.5 in eastern China, reducing toxic PM 2.5 from these anthropogenic combustions will be greatly beneficial to public health. In addition to the air pollution control measures that have been implemented, like strengthening the vehicle emission standards, switching energy from coal to gas and electricity, and controlling the open incineration of agricultural straws, further methods could be considered, especially by preferentially reducing the diesel exhaust, lessening the coal combustion by replacement with low-ash clean coals, and depressing the rural crop straw biomass burning emissions. [ABSTRACT FROM AUTHOR]

Purpose: The increasing soil microplastics (MPs) pollution and the dry–wet alternation caused by climate change occur widely. Emerging studies have shown their negative impacts on the structure of soil bacteria and plant physiology. However, there is limited research on the effects of MPs exposure under different water regimes, and the influence processes are inconclusive. Therefore, the impacts of MPs under different water regimes on the antioxidant activity of vegetable and the soil bacterial community were studied. Materials and methods: A continuous water supply and a dry–wet cycle were established to compare the effects of two types of MPs (polypropylene (PP); polyethylene terephthalate (PET)) on lettuce (Lactuca sativa L. var. longifolia) growth and soil bacterial community, determined by antioxidant enzyme activity analysis, and by high-throughput sequencing analysis, respectively. Results: The PET influenced the lettuce growth and bacterial diversity largely compared to PP. The dry–wet cycle enhanced the effects of MPs on the activity of the antioxidant enzymes in lettuce, while it reduced lettuce biomass and root activity. Proteobacteria and Actinobacteria were the dominant soil bacteria under all treatments. The addition of MPs increased the relative abundance of nutrient-related bacteria such as Proteobacteria. MPs addition increased intragroup differences in soil bacterial diversity, and the dry–wet cycle reduced intergroup differences caused by MPs. Conclusion: The polymer type of MPs influenced the antioxidant activity of lettuce roots and leaves. The dry–wet cycle intensified the exposure risk of MPs by enhancing the stimulation of MPs on the antioxidant activity of lettuce. The dry–wet cycle significantly reduced the MPs-induced differences in bacterial communities. In short, the dry–wet cycle might alter the ecological risks in plant-soil ecosystem by shifting soil bacterial lineages related to nutrient cycling and metabolic function under MPs exposure. [ABSTRACT FROM AUTHOR]

Purpose: Climate changes have significant impacts on crop yield, and also on crop quality related to food safety and human health. This study investigated the influences of atmospheric carbon dioxide (CO2) enrichment on cereal metal accumulation in soil-crop system. Materials and methods: Field rotation experiments of rice (Oryza sativa) and winter wheat (Triticum aestivum) were conducted by simulating elevated CO2 concentrations (e[CO2]) in 12 open-top chambers (OTCs). The treatments included the ambient [CO2] (CK), 80 ppm (T1) and 200 ppm (T2) above ambient condition, respectively. Different parts of above-ground plant samples were analyzed for metal concentrations (Cu, Zn, Fe, Mn; Ca, Mg) at the key growth stages, assisted with analyses of soil pH, metal bioavailability, and transfer factors (TFs). Results and discussion: The result patterns were opposite for rice and wheat. After the increased transport from rhizospheric soil solution due to the metal mobilization by declined pH, most metals increased their distributions in rice grain, husk, and stem than leaf. While for winter wheat, though soil metal bioavailability was also increased, their distributions in grain, husk, and stem were decreased owing to possible carbohydrate dilution effect or cation competition, except some macro metals distributed more in leaf. Conclusions: Since results of metals and crops are not always consistent among various reports, the mechanisms of essential/toxic metal transport in soil-crop system affected by climate change and its impacts on human health deserve further studies. [ABSTRACT FROM AUTHOR]

Behaviors of soil heavy metals are often affected by coexisting herbicides due to their physical and chemical interaction. Effect of glyphosate, an herbicide containing -PO_3^{2-} and -COOH groups, on cadmium adsorption in montmorillonite was studied in detail. The results showed that cadmium adsorption quantity in montmorillonite increased with increasing soil solution pH and cadmium concentration as usual, but decreased with glyphosate, which is due to the formation of a low affinity complex of Cd and glyphosate and decreasing solution pH induced by glyphosate addition. When the equilibrium solution pH was below 6.7, glyphosate has little effect on cadmium adsorption, but when the equilibrium solution pH was above 6.7, glyphosate significantly decreased cadmium adsorption quantity in montmorillonite. In addition, the adding order of Cd and glyphosate also influenced Cd adsorption quantity in montmorillonite. [ABSTRACT FROM AUTHOR]

Aerosol pollution is a serious environmental issue, especially in China where there has been rapid urbanization. To identify the intra-annual and regional distributions of health risks and potential sources of heavy metals in atmospheric particles with an aerodynamic diameter less than or equal to 2.5 μm (PM2.5), this work collected monthly PM2.5 samples from urban, industrial, suburban, and rural areas in Nanjing city during 2016 and analyzed the heavy metal compositions (Cu, Pb, Cd, Co, V, Sr, Mn, Ti, and Sb). Enrichment factors (EFs) and principal component analysis (PCA) were applied to investigate the sources. The atmospheric PM2.5 pollution level was highest in the industrial area, followed by the urban and suburban areas, and was the lowest in the rural area. Seasonally, the concentrations of PM2.5 and associated heavy metals in spring and winter were higher than those in summer and autumn. Besides natural sources, heavy metal pollution in PM2.5 might come from metallurgical dust in the industrial area, while it mainly comes from automobile exhaust in urban and suburban areas. Health risk assessments revealed that noncancerous hazards of heavy metals in PM2.5 were low, while the lifetime cancer risks obviously exceeded the threshold. The airborne metal pollution in various functional areas of the city impacted human health differently. [ABSTRACT FROM AUTHOR]

Fine particulate matter (PM2.5) is a typical air pollutant and has adverse health effects across the world, especially in the rapidly developing China due to significant air pollution. The PM2.5 pollution varies with time and space, and is dominated by the locations owing to the differences in geographical conditions including topography and meteorology, the land use and the characteristics of urbanization and industrialization, all of which control the pollution formation by influencing the various sources and transport of PM2.5. To characterize these parameters and mechanisms, the 5-year PM2.5 pollution patterns of Jiangsu province in eastern China with high-resolution was investigated. The Kriging interpolation method of geostatistical analysis (GIS) and the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model were conducted to study the spatial and temporal distribution of air pollution at 110 sites from national air quality monitoring network covering 13 cities. The PM2.5 pollution of the studied region was obvious, although the annual average concentration decreased from previous 72 to recent 50 μg m−3. Evident temporal variations showed high PM2.5 level in winter and low in summer. Spatially, PM2.5 level was higher in northern (inland, heavy industry) than that in eastern (costal, plain) regions. Industrial sources contributed highest to the air pollution. Backward trajectory clustering and potential source contribution factor (PSCF) analysis indicated that the typical monsoon climate played an important role in the aerosol transport. In summer, the air mass in Jiangsu was mainly affected by the updraft from near region, which accounted for about 60% of the total number of trajectories, while in winter, the long-distance transport from the northwest had a significant impact on air pollution. [ABSTRACT FROM AUTHOR]